PAGE 1 OF 4

IMPORTANT SAFETY INSTRUCTIONS:• Consult certified electrician before

installation that familiar withcommercial type of applications.

• To reduce risk of fire, use 12-wattCompact Fluorescent lamp and do notexceed the recommended wattage.

• The manufacturer and distributoraccepts no liability for incorrectinstallation.

• The ceiling must have at least thecapacity of 5 times the weight of theceiling light. For this light at least aceiling capacity of 30 kg is required.

• Maximum Supply Current 1 A

WARNING• Turn-off electricity supply at main

circuit panel before installing. All wiresare connected. Do not remove theceiling light from its packaging by pullingon the power cord, as a bad connectionmay result.

• To reduce the risk of fire, electricalshock, or personal injury, always turn offthe ceiling light and allow it to cool priorto replacing light bulb. Do not touch bulbwhen fixture is turned on or look directlyat light bulb. Keep flammable materialsaway from light bulb.

• Deviation from instructions may result ina risk of fire or electric shock.

• Suitable for indoor use only.• The external flexible cable or cord of this

luminaire cannot be replaced; if the cordis damaged, the luminaire shall bedestroyed.

• Terminal block not included. Installationmay require advice from a qualifiedperson.

CANOPY (1PC)

DECORATIVE PIPE WITHTHREADED TUBE

6, 12, 24 IN. OPTIONAL LENGTH

FIXTURE LOOP (2PCS)

CHANDELIER (1PC)

A

I

L

F

HANGER BAR (1PC)

B1 LONGER ALL-THREAD (1PC)

B2 ALL-THREAD (1PC)

CBLACK PLASTIC CORDPROTECTOR (1PC)

D NUT (2PCS)

E WASHER (2PCS)

SUSPENSION WIRE (1PC)G

WIRE GRIP (2PCS)H

K

J SMALL NUT (4PCS)

M QUICK LINK (1PC)

PAGE 2 OF 4

INSTRUCTIONS

1. Open the parts bag and place all on a flatsurface.

2. Remove the chandelier body and lay on a flatsurface.

3. Screw part the longer all-thread (B1) into thehanger bar (A). (see picture #1).

4. On the “top” of the all thread, above thehanger bar, attach a washer (E), nut (D) and ablack plastic cord protector (C). (see pic #2).

5. Bring the lamp base close to your hanginglocation.

6. Attach Fixture Loop (F) to the smaller pieceof all thread- part (B2). Use the set screw tolock. (See picture #3).

7. Thread the electrical cord through the FixtureLoop (F). Attach the all thread (B2) andFixture Loop (F) to the connector on the lampbody. (see picture #4).

8. Attach one end of the suspension wire (G) toFixture Loop (F). You will need a pair of pliersto squeeze the wire grips (H). Make surethese are clamped tight around thesuspension wire. (see picture #5).

9. Over the end of the electrical you will slideFixture Loop (F), nickel end cap, the canopy,and then the all thread which is now attachedto the hanger bar.

10. Make the electrical connection and cutexcess black electrical wire. Leave enoughwire for any adjustments you might need todo later.

11. Attach the hanger bar (see picture #6)12. Push the canopy to the ceiling and tightness

flush with the ceiling by spinning onto the allthread, Fixture Loop (F) (see picture #7).

13. Attach the open end of the suspension.

PIC 1

A

B1

C

DE

PIC 2

PIC 3B2

F

PIC 4

PAGE 3 OF 4

PIC 5G

HPIC 6

PIC 7

DE

J

F

G

H

I

J

THANK YOU FOR YOUR PURCHASEwww.restorationhardware.com

M

OPTIONAL POLE FOR CHANDELIERThis chandelier can also be hung using a decorative lamp pole. We have provided 3 different sizes, please follow the several steps below depending on your ceiling height. The decorative lamp poles must be used independently and cannot be combined together.STEP NO. 1Thread the electrical cord intothe thread tube (L); attach thethreaded tube into theconnector tube by twistingclockwise and secure this withthe set screws.

CONNECTOR TUBEWITH SET SCREW

STEP NO. 2Thread electrical wire through a check ring, yourchosen decorative pipe (L), fixture loop (F) andthe quick link (M). Slide the check ring and thedecorative pipe over the threaded tube and fastenthe end with the fixture hook. These will rest atopthe connector tube.

STEP NO. 3Hook the chandelier into the fixture loop.

L

F

L

PAGE 4 OF 4