Rinnovare Laser Cosmetics, LLC

Information on Dental Teeth Whitening Lasers:

Procedure Usually Lasts For: May Cause During and Shortly After Procedure: Time for Procedure: Changes in Shade: Average Cost Gel/Tray 4 - 12 Months Sensitive Gums/Teeth 50 Hours 4 - 5 $ 400.00 Laser 12 - 18 Months Minor Discomfort 2 - 3 Hours 7 - 8 $ 1,100.00

How white your teeth can become from bleaching and whitening is a common question with a very subjective answer. Some whitening procedures claim they can whiten your teeth by up to nine shades, but that is highly unlikely. Just a change of two or three shades will make a significant difference in just about anyone's smile. There is no one standard system in the dental field to measure and determine tooth color. The most often heard about, however, is the Vita shade guide. This guide divides tooth color into four basic shade ranges: A (reddish brown) B (reddish yellow) C (gray) D (reddish gray). In the A range there are five levels of darkness. Ranges B, C and D, each have four levels. Not all of your teeth are the same natural color. Usually your eye teeth tend to be darker than the others, your front teeth are typically the whitest, and molars tend to be a shade between the two. The goal for everyone is to achieve their individual optimum whiteness while still looking natural. During your first consultation for tooth whitening, your dentist will go over what you personally can expect for your specific smile. How white teeth will become from a given procedure will vary from person to person. The structure of your teeth and the type of procedure implemented will affect the outcome. The following chart will give you some idea of how to compare the two most popular methods for tooth whitening. As everyone's circumstances are different, both options should be further discussed with your cosmetic dentist prior to making a decision.

Rinnovare-Dental-100-A

Medical Device Classification: CE Certificated & FDA Approved Class I Specifications: Power Supply: Input AC110V AND 220V, 50/60Hz LED life expenctancy:>50,000 hours Blue LED light Intensity:138888 uW/cm2 Blue wavelength:460nm ~ 490nm Light intensity:7000 MCD Number of power lights:119 Power led light units. Magnify Lens: 3X magnifying Cooling:Powerfull centrifugal air cooling

Rinnovare Dental Whitening Laser-Model 100-B Medical Device Classification: CE Certificated & FDA Approved Class I Power Supply: Input AC110V AND 220V, 50/60Hz LED life expenctancy: >50,000 hours Blue LED light Intensity:138888 uW/cm2 Blue wavelength:460nm ~ 490nm Light intensity:7000 MCD Number of power lights:119 Power led light units. Magnify Lens:3X magnifying Cooling:Powerfull centrifugal air cooling

Rinnovare Dental Whitening Laser-Model 100-C CE Certificated & FDA Approved Class I Lights type: light emitting diode- super light cooling semiconductor light source Output wavelength: blue light 465±1nm Output energy: 120mw Power consumption: 70w~100w Repetition rate: Continuous or 10Hz pulse The size of facula: 30×90mm2 Operation interface: tangibly color liquid crystal display Electrical source: 90v-250v50/60Hz

Rinnovare-Dental Whitening-100-D

Reduce irritation whitening effect reduce inflammation

Technical Specifications:

Light type: light emitting diode(super cooling semiconductor light source)

Led Light sources:

1.Green

2.Blue

3.Red

4.Mixed(Green,blue and red)

Power consumption:300w

Time range:0-25 minutes(adjustable)

Operation interface: Colorful LCD button screen

Power supply: Input AC 110V±10% or 220V±10%, 50/60Hz

Energy Intensity: >60mj/cm2

Spot size:18*74mm2

Working mode: Time adjustable Continuous working

Time range:0-20 mins(adjustable)

LED lamps Number: 68 units

Light coupling: Polyester monomer waveguide

Net weight:19.5kg

Size:139*45*45cm

Model: Rinnovare-CPT003 FDA Cleared / CE

Rinnovare-CP-T003 Specifications: Theory & Range Teeth Whitening System uses high-intensity blue light at a wavelength of 480-520 Nanometers. The light is

filtered through over 30 layers of coated optical glass to remove infrared and ultraviolet light. Used together with

our special whitening formula, the half hour procedure rapidly oxidizes 16 or more teeth through the dentin tube,

restoring them to a beautiful white.

Teeth Whitening operates at a lower temperature than similar products by using the latest optical techniques to

avoid irritation of the nerves of the teeth. The 30-minutes process is very effective for teeth that have been

stained by smoking or by substance like coffee or tea. It also whitens teeth discolored by medicine such as

tetracycline or speckled by fluoride.

Spec:

Power requirement: AC 110-240V, 50/60HZ Working Power: 220v Wavelength: 480-520nm

Light Bulbs:119 Light Bulbs Light Mode: Continues Pulse light Dimension of base: 60CM*40CM*40CM

Net Weight: 10KG Working Temperature: 1-30 Work Humidity: 5-90%RP