Our new beam head provides a simple solution to problems related to beam engagement. It features a new “KwikLatch”release, with an ergonomic finger tab, that makes it easy to operate. The new release mechanism, positioned on theside of the beam head, also reduces the potential for damage compared to a topside release location.

This innovative new beam head design is now standard on all Kinedyne FE8000 and FE8066 series aluminumbeams, and can also be retrofit into any existing beam from this series. Visit our website at www.kinedyne.comto watch our new video clip and find out more about our improved E/A Series beams.

Kinedyne. Working harder to provide solutions to your cargo control problems.

Introducing our new andimproved E/A Series Beams.

Kinedyne FE8000 and FE8066 seriesaluminum beams now include these newstandard features:

• Redesigned beam head with“KwikLatch” release and ergonomicfinger tabs

• Convenient new beam storagesolution using an E-Track fitting andKeyhole slot

See reverse side for more details on BeamHead, Keyhole Slot and E-Key Fitting

DISTRIBUTOR:

www.kinedyne.com

Beam now features ergonomic finger tabson both sides of the beam head

Optional accessory the E-Key Fitting(Item# 80023) provides method to

store beams on logistic track

Optional accessory the Safety Lock Pin(Item# 80030) provides a tamperproof

device to protect valuable cargo

Kinedyne Series E/A Beams now includenew features and accessories.

Traditional beams use a “tab” style release mechanism, mounted on the top side of the beamhead. This topside position leaves the release “tab” prone to damage. Our new side mountrelease position and ergonomic finger tabs, located on both sides of the head, make it easy toengage the beam head with the track.

The E-Key Fitting (Item# 80023) accessory allows the operator to store the new Keyhole Slotbeams on a piece of logistic track mounted high on the trailer wall. A strap or tarp tie willsecure the lower end of the beams from excess movement while the trailer is in motion.

The Safety Lock Pin (Item# 80030) provides a tamperproof device to help prevent theft ofvaluable cargo in shoring applications. When the locking pin is inserted in the guide hole,located on the beam head, it secures the beam while in a shoring position. The pin is easilyremoved, using bolt cutters, at the final destination.

The KwikLatch release and Keyhole Slot are now standard features on all aluminum beams inthis series. For example, when you order a standard Kinedyne part number FE8066-1 you willreceive all of these new features.

These improvements are just some of the many cargo control innovations brought to you byKinedyne, The Cargo Control People for more than four decades.