RF Test Report - s3-ap-southeast-2. · PDF fileDate of test Feb.16,2016 to Feb.18,2016 We...

of 49

RF Test Report

Report No.: AGC05278160201EE10

TEST NAME : 1999/5/EC R&TTE Directive Art.3.2 PRODUCT DESIGNATION : iHere3.0 BRAND NAME : iHere3.0 MODEL NAME : iHere3.0 CLIENT : No NDA Inc. DATE OF ISSUE : Feb.24,2016 STANDARD(S) : EN 300 328 V1.9.1 2015-02 REPORT VERSION : V1.0 Attestation of Global Compliance (Shenzhen) Co., Ltd

CAUTION: This report shall not be reproduced except in full without the written permission of the test laboratory and shall not be quoted out of context.

Report No.: AGC05278160201EE10 of 49

Report Revise Record

Report Version Revise Time Issued Date Valid Version Notes

V1.0 / Feb.24,2016 Valid Original Report


TABALE OF CONTENTS

TABALE OF CONTENTS .................................................................................................................................. 3

1. TEST RESULT CERTIFICATION ................................................................................................................. 4

2. TECHNICAL INFORMATION ...................................................................................................................... 5

2.1 EUT DESCRIPTION ................................................................................................................................ 5 2.2 SUPPORT EQUIPMENT ......................................................................................................................... 6 2.3 DESCRIPTION OF TEST MODES .......................................................................................................... 6

3 DETAILS OF TEST ...................................................................................................................................... 8

3.1 IDENTIFICATION OF THE RESPONSIBLE TESTING LOCATION ............................................................. 8 3.2 LIST OF TEST EQUIPMENTS ..................................................................................................................... 8 3.3 ENVIRONMENTAL CONDITIONS ............................................................................................................... 8 3.4 MEASUREMENT UNCERTAINTY ............................................................................................................... 9

4. ETSI EN 300 328 REQUIREMENTS .............................................................................................................. 9

4.1 RF OUTPUT POWER .................................................................................................................................. 9 4.2. POWER SPECTRAL DENSITY ................................................................................................................ 12 4.3. DUTY CYCLE, TX-SEQUENCE, TX-GAP ................................................................................................. 15 4.4. MEDIUM UTILISATION (MU) FACTOR ..................................................................................................... 16 4.5. ADAPTIVITY (CHANNEL ACCESS MECHANISM) ................................................................................... 17 4.6. OCCUPIED CHANNEL BANDWIDTH ....................................................................................................... 18 4.7. TRANSMITTER UNWANTED EMISSIONS IN THE OUT OF BAND DOMAIN ......................................... 20 4.8. TRANSMITTER SPURIOUS EMISSIONS ................................................................................................ 25 4.9. RECEIVER SPURIOUS EMISSIONS ....................................................................................................... 30 4.10. RECEIVER BLOCKING .......................................................................................................................... 42

APPENDIX A ................................................................................................................................................... 43

PHOTOGRAPHS OF THE TEST SETUP ........................................................................................................ 43

APPENDIX B ................................................................................................................................................... 44

PHOTOGRAPHS OF THE EUT ....................................................................................................................... 44


1. TEST RESULT CERTIFICATION

Applicant Name: No NDA Inc.

Address: 828 Bryant St. Palo Alto, CA 94301, USA

Manufacturer Name: No NDA Inc.

Address: 828 Bryant St. Palo Alto, CA 94301, USA

Product Designation: iHere3.0

Brand Name: iHere3.0

Test Model iHere3.0

Date of test Feb.16,2016 to Feb.18,2016

We (AGC), Attestation of Global Compliance (Shenzhen) Co., Ltd. for compliance with the requirements set

forth in the European Standard ETSI EN 300 328 V1.9.1. The results of testing in this report apply to the

product/system which was tested only. Other similar equipment will not necessarily produce the same results

due to production tolerance and measurement uncertainties.

Tested By

Time Huang(Huang Nanhui) Feb.24,2016

Reviewed By

Forrest Lei(Lei Yonggang) Feb.24,2016

Approved By

Solger Zhang(Zhang Hongyi)Authorized Officer

Feb.24,2016


2. TECHNICAL INFORMATION 2.1 EUT DESCRIPTION Bluetooth Version V 4.0

Modulation GFSK

Hardware Version V1.0

Software Version V1.0

Adaptive / non-adaptive equipment Adaptive Equipment

The number of Hopping Frequencies 40 Channel(37 Hopping Channel,3advertising Channel)

The maximum RF Output Power (e.i.r.p.) -1.75dBm

The different transmit operating modes Operating mode 1: Single Antenna Equipment Equipment with only 1 antenna

Operating Frequency Range(s) 2402MHz~2480MHz

Type of Equipment Stand-alone

Antenna designation Ceramic Antenna

Antenna gain 0dBi

Nominal voltages DC 3.7V by battery

The extreme operating conditions Operating temperature range: -20°C~55°C

Note: 1. The above information was declared by the applicant.

2. The equipment submitted are representative production models.

3. The EUT provides Bluetooth wireless interface operating at 2.4G ISM band (2402MHZ-2480MHZ).

4. Only the Bluetooth was tested according the standard requirement.

5. The EUT is an adaptive equipment and hand-portable station according to ETSI EN 300 328 v1.9.1.

6. Please refer to Appendix Ⅰ for the photographs of the EUT. For more details, please refer to the User’s manual of the EUT.


2.2 SUPPORT EQUIPMENT

Item Equipment Mfr/Brand Model/Type No. Remark

1 PC APPLE A1465 A.E

2.3 DESCRIPTION OF TEST MODES

NO. TEST MODE DESCRIPTION

1 Low channel TX

2 Middle channel TX

3 High channel TX

4 Low channel RX

5 Middle channel RX

6 High channel RX Note: All the test modes can be supply by battery, only the result of the worst case was recorded in the report if no any records.


A) OBJECTIVE

Perform Radio Spectrum tests for CE Marking according to the provisions of article 3.2 of the R&TTE Directive (1999/5/EC) for the Bluetooth function of the EUT.

B) TEST STANDARDS AND RESULTS The EUT has been tested according to ETSI EN 300 328 V1.9.1 (2015-02).

ETSI EN 300 328 V1.9.1 (2015-02)

Electromagnetic compatibility and Radio spectrum Matters (ERM); Wideband transmission systems;Data transmission equipment operating in the 2,4 GHz ISM band and using wide band modulation techniques; Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive

TEST ITEMS AND THE RESULTS ARE AS BELOW:

Note: 1. N/A means it’s not applicable to this item.

2. Owing to the maximum declared RF Output power (e.i.r.p.) less than 10 dBm, so the item 3, 4, 5, 10 are not applicable.

№ Basic Standard Test Type The worst case operational mode Result

1 ETSI EN 300 328 4.3.2.2 RF Output Power Mode 1/2/3 Pass

2 ETSI EN 300 328 4.3.2.3 Power Spectral Density Mode 1/2/3 Pass

3 ETSI EN 300 328 4.3.2.4 Duty Cycle, Tx-sequence, Tx-gap N/A N/A

4 ETSI EN 300 328 4.3.2.5 Medium Utilisation (MU) factor N/A N/A

5 ETSI EN 300 328 4.3.2.6 Adaptivity (adaptive equipment using modulations other than FHSS) N/A N/A

6 ETSI EN 300 328 4.3.2.7 Occupied Channel Bandwidth Mode 1/3 Pass

7 ETSI EN 300 328 4.3.2.8 Transmitter unwanted emissions in the out-of-band domain Mode 1/3 Pass

8 ETSI EN 300 328 4.3.2.9 Transmitter unwanted emissions in the spurious domain Mode 1/3 Pass

9 ETSI EN 300 328 4.3.2.10 Receiver spurious emissions Mode 4/6 Pass

10 ETSI EN 300 328 4.3.2.11 Receiver Blocking N/A N/A

11 ETSI EN 300 328 4.3.2.12 Geo-location capability N/A N/A


3 DETAILS OF TEST 3.1 IDENTIFICATION OF THE RESPONSIBLE TESTING LOCATION

Company Name: Attestation of Global Compliance (Shenzhen) Co., Ltd.

Address: 2/F., Building 2, No.1-No.4, Chaxi Sanwei Technical Industrial Park, Gushu, Xixiang, Bao'an District, Shenzhen, Guangdong, China

3.2 LIST OF TEST EQUIPMENTS

Description Manufacturer Model No. S/N Calibration Date

Calibration Due.

SIGNAL ANALYZER Agilent N9020A MY49100060 Oct. 21, 2015 Oct. 20,2016

SIGNAL GENERATOR Agilent N5182A MY50140530 Oct. 21, 2015 Oct. 20,2016

SIGNAL GENERATOR Agilent E8257D MY45141029 Dec. 04,2015 Dec.03,2016

USB Wideband Power Sensor Agilent U2021XA MY54110007 Oct. 24, 2015 Oct. 23, 2016




USB Simultaneous Sampling

Multifunction DAQ Agilent U2531A MY5211038 Oct. 24, 2015 Oct. 23, 2016

2.4 GHz Filter Micro-Tronics BRM50702 017 Mar. 06, 2015 Mar. 05, 2016

Spectrum Analyzer Agilent E4440A US41421290 July 25, 2015 July 24, 2016

WIDEBAND REQUENCY ANTENNA

SCHWARZBECK VULB9168 VULB9168-494 Mar.20, 2015 Mar.19, 2016

Horn Antenna EM EM-AH-10

180 67 Mar.12, 2015 Mar.11, 2016

Amplifier EM EM30180 060552 Mar.06, 2015 Mar.05, 2016 3.3 ENVIRONMENTAL CONDITIONS

During the measurement the environmental conditions were within the listed ranges: - Temperature: 15-35ºC - Humidity: 30-60 % - Atmospheric pressure: 86-106 kPa


3.4 MEASUREMENT UNCERTAINTY The uncertainty is calculated using the methods suggested in the “Guide to the Expression of Uncertainty in

Measurement” (GUM) published by ISO. - Uncertainty of Radio Frequency, Uc=±1 x 10-5

- Uncertainty of total RF power, conducted, Uc = ±1.5dB - Uncertainty of RF power density, conducted, Uc = ±3dB - Uncertainty of spurious emissions, conducted, Uc = ±3dB - Uncertainty of all emissions, radiated, Uc = ±6dB - Uncertainty of Temperature: ±1°C - Uncertainty of Humidity: ±5 % - Uncertainty of DC and low frequency voltages: ±3 %

4. ETSI EN 300 328 REQUIREMENTS 4.1 RF OUTPUT POWER EN 300 328 Clause 4.3.2.3 For adaptive equipment using wide band modulations other than FHSS, the maximum RF output power shall be 20 dBm. The maximum RF output power for non-adaptive equipment shall be declared by the supplier and shall not exceed 20 dBm. See clause 5.3.1 m). For non-adaptive equipment using wide band modulations other than FHSS, the maximum RF output power shall be equal to or less than the value declared by the supplier. This limit shall apply for any combination of power level and intended antenna assembly.

Test Configuration

Remarks: EUT was direct connected to test equipment through coupling device.

TEST PROCEDURE 1. Please refer to ETSI EN 300 328 (V1.9.1) clause 5.3.2.1 for the test conditions. 2. Please refer to ETSI EN 300 328 (V1.9.1) clause 5.3.2.2.1 for the measurement method.


TEST RESULTS

Operation Mode: TX Test Date: Feb.24,2016

Temperature: 25oC Tested by: Time Huang

Humidity: 55 % RH Detector: RMS

Number of Burst = 10

Measurement Time = 45.53ms

TEST CONDITIONS GFSK MODULATION RF OUTPUT POWER (dBm)

Temp (25)°C Temp (-20)°C Temp (55)°C

Result DC 3.7V DC 3.7V DC 3.7V

Low Channel TX -4.62 -4.65 -4.66

Middle Channel TX -3.1 -3.11 -3.15

High Channel TX -1.75 -1.78 -1.76

Limit 20dBm

Low Channel


Middle Channel

High Channel

Note: Result=Reading+ Ant. Gain The reading value included cable loss. The diagrams are for normal temperature. Conclusion: PASS


4.2. POWER SPECTRAL DENSITY EN 300 328 Clause 4.3.2.3 For wide band modulations other than the FHSS, The maximum E.I.R.P Power density is limited to 10mW Per MHz TEST PROCEDURE 1. Please refer to ETSI EN 300 328 (V1.9.1) clause 5.3.3.1 for the test conditions. 2. Please refer to ETSI EN 300 328 (V1.9.1) clause 5.3.3.2.1 for the measurement method. 3 The equipment setting as following Start Frequency: 2 400 MHz

• Stop Frequency: 2 483,5 MHz • Resolution BW: 10 kHz • Video BW: 30 kHz • Sweep Points: >8350 Detector: RMS

• Trace Mode: Max Hold • Sweep time: Auto


TEST RESULTS

PEAK POWER DENSITY

Channel Tested Power Density (dBm/MHz)

Test Limit (dBm/MHz) Pass / Fail

Low Channel TX -4.66 10 Pass

Middle Channel TX -3.1 10 Pass

High Channel TX -1.82 10 Pass

Low Channel

Middle Channel


High Channel


4.3. DUTY CYCLE, TX-SEQUENCE, TX-GAP ETSI EN 300 328 SUBCLAUSE 4.3.2.4 The Duty Cycle shall be equal to or less than the maximum value declared by the supplier. The maximum Tx-sequence Time and the minimum Tx-gap Time shall be according to the formula below: Maximum Tx-Sequence Time = Minimum Tx-gap Time = M where M is in the range of 3,5 ms to 10 ms. TEST CONFIGURATION TEST PROCEDURE 1. Please refer to ETSI EN 300 328 (V1.9.1) clause 5.3.2.1 for the test conditions. 2. Please refer to ETSI EN 300 328 (V1.9.1) clause 5.3.2.2.1.3 the measurement method.

TEST RESULT

N/A

Monopole Antenna

Spectrum analyzer

EUT

(See Note)


4.4. MEDIUM UTILISATION (MU) FACTOR ETSI EN 300 328 SUBCLAUSE 4.3.2.5 The Medium Utilisation (MU) factor is a measure to quantify the amount of resources (Power and Time) used by non-adaptive equipment. The Medium Utilisation factor is defined by the formula: MU = (P/100 mW) × DC where: MU is Medium Utilisation factor in %. P is the RF output power as defined in clause 4.3.1.1.1 expressed in mW. DC is the Duty Cycle as defined in clause 4.3.1.2.1 expressed in %. NOTE: The equipment may have dynamic behaviour with regard to duty cycle and corresponding power level. TEST CONFIGURATION TEST PROCEDURE 1. Please refer to ETSI EN 300 328 (V1.9.1) clause 5.3.2.1 for the test conditions. 2. Please refer to ETSI EN 300 328 (V1.9.1) clause 5.3.2.2.1.4 the measurement method. TEST RESULT N/A

Monopole Antenna

Spectrum analyzer

EUT

(See Note)


4.5. ADAPTIVITY (CHANNEL ACCESS MECHANISM) ETSI EN 300 328 SUBCLAUSE 4.3.2.6 This requirement does not apply to non-adaptive equipment or adaptive equipment operating in a non-adaptive mode providing the equipment complies with the requirements and/or restrictions applicable to non-adaptive equipment. In addition, this requirement does not apply for equipment with a maximum declared RF Output power level of less than 10 dBm e.i.r.p. or for equipment when operating in a mode where the RF Output power is less than 10 dBm e.i.r.p. Adaptive equipment using modulations other than FHSS is allowed to operate in a non-adaptive mode providing it complies with the requirements applicable to non-adaptive equipment. An adaptive equipment using modulations other than FHSS is equipment that uses a mechanism by which it can adapt to its environment by identifying other transmissions present within its Occupied Channel Bandwidth. Adaptive equipment using modulations other than FHSS shall implement either of the Detect and Avoid mechanisms provided in clauses 4.3.2.5.1 or 4.3.2.5.2. Adaptive systems are allowed to switch dynamically between different adaptive modes. TEST CONFIGURATION

TEST PROCEDURE 1. Please refer to ETSI EN 300 328 (V1.9.1) clause 5.3.7.1 for the test conditions. 2. Please refer to ETSI EN 300 328 (V1.9.1) clause 5.3.7.2.1 the measurement method. . TEST RESULT N/A


4.6. OCCUPIED CHANNEL BANDWIDTH ETSI EN 300328 SUBCLAUSE 4.3.2.7 The Occupied Channel Bandwidth shall fall completely within the band given in clause 1. In addition, for non-adaptive systems using wide band modulations other than FHSS and with e.i.r.p greater than 10 dBm, the occupied channel bandwidth shall be less than 20 MHz. CONFIGURATION

TEST PROCEDURE 1. Please refer to ETSI EN 300 328 (V1.9.1) clause 5.3.8.1 for the test conditions. 2. Please refer to ETSI EN 300 328 (V1.9.1) clause 5.3.8.2.1 the measurement method. 3. The Test equipment information as following Centre frequency: 2402MHz,2480MHz Resolution bandwidth: 20kHz Video bandwidth: 62kHz Detector mode :RMZ Trace mode :Max Hold TEST RESULT TEST ITEM OCCUPIED CHANNEL BANDWIDTH

TEST MODE GFSK MODULATION

MEASUREMENT RESULT

Test Data (MHz) Criteria

Low Channel 1.02 PASS

High Channel 1.02 PASS Conclusion: PASS


Low Channel

High Channel


4.7. TRANSMITTER UNWANTED EMISSIONS IN THE OUT OF BAND DOMAIN ETSI EN300328 SUBCLAUSE 4.3.2.8

TEST CONFIGURATION

For have temporary antenna connector product


Spectrumanalyzer

Horn antenna

3m

4m

1m Turntable

EUT

1.5m

Antennatower

Pre-amp

For have no temporary antenna product TEST PROCEDURE 1. Please refer to ETSI EN 300 328 (V1.9.1) clause 5.3.9.1 for the test conditions. 2. Please refer to ETSI EN 300 328 (V1.9.1) clause 5.3.9.2.1 the measurement method. TEST RESULT


NORMAL TEMPERATURE NORMAL VOLTAGE

Channel Antenna Freq(MHz) Level Limit

CH Low-2402 Antenna 1 2399.5 -44.49 -10

CH Low-2402 Antenna 1 2398.474 -46.26 -20


CH High-2480 Antenna 1 2484.029 -51.42 -10

CH High-2480 Antenna 1 2485.058 -54.73 -20


LOW TEMPERATURE NORMAL VOLTAGE


CH Low-2402 Antenna 1 2399.5 -44.53 -10

CH Low-2402 Antenna 1 2398.471 -46.47 -20


CH High-2480 Antenna 1 2484.029 -50.58 -10

CH High-2480 Antenna 1 2485.058 -54.49 -20


HIGH TEMPERATURE NORMAL VOLTAGE


CH Low-2402 Antenna 1 2399.5 -44.67 -10

CH Low-2402 Antenna 1 2398.471 -46.31 -20


CH High-2480 Antenna 1 2484.029 -51.76 -10

CH High-2480 Antenna 1 2485.058 -54.58 -20

Note: The modulation used during test is GFSK Conclusion: PASS


4.8. TRANSMITTER SPURIOUS EMISSIONS ETSI EN300328 SUBCLAUSE 4.3.2.9

Spurious emissions are emissions outside the frequency range(s) of the equipment as defined

in Clause 4.3.1.9.

Transmitter unwanted emissions in the spurious domain are emissions outside the allocated band and outside the out-of-band domain as indicated in figure 1 when the equipment is in Transmit mode.

The spurious emissions of the transmitter shall not exceed the values in tables in the indicated bands:

Frequency Range Maximum Power

e.r.p(<=1GHz)/e.i.r.p(>1GHz)

Bandwidth

30MHZ to 47MHZ -36dBm 100kHz


74MHZ to 87.5MHZ -36dBm 100kHz

87.5MHZ to 118MHZ -54dBm 100kHz


174 MHZ to 230MHZ -54dBm 100kHz



862 MHZ to 1GHZ -36dBm 100kHz

1 GHZ to 12.75GHZ -30dBm 1MHz


Test Configuration

Below 1GHz

Spectrum analyzer

3m

4m

1mTurntable

EUT

1.5m

Antenna tower

Reference ground plane

Bi-log or Loop antenna

Above 1GHz

Spectrumanalyzer

Horn antenna

3m

4m

1m Turntable

EUT

1.5m

Antenna tower

Pre-amp


Radiated Method

Conducted Method

TEST PROCEDURE 1. Please refer to ETSI EN 300 328 (V1.9.1) clause 5.3.10.2.1 for the conducted method. 2. Please refer to ETSI EN 300 328 (V1.9.1) clause 5.3.10.2.2 for the radiated method.

TEST RESULTS FOR RADIATED METHOD(N/A)

TEST SETTING The emissions over the range 30 MHz to 1 000 MHz shall be identified. Spectrum analyser settings: • Resolution bandwidth: 100 kHz • Video bandwidth: 300 kHz • Detector mode: Peak • Trace Mode: Max Hold • Sweep Points: ≥ 9 970 The emissions over the range 1 GHz to 12,75 GHz shall be identified. Spectrum analyser settings: • Resolution bandwidth: 1 MHz • Video bandwidth: 3 MHz • Detector mode: Peak • Trace Mode: Max Hold • Sweep Points: Sweep time [μs] / (1 μs) with a maximum of 30 000


TEST RESULTS CONDUCTED RESULTS: (Low channel)


(High channel)

Conclusion: PASS


TEST RESULTS FOR RADIATED METHOD Low Channel: Transmitter Spurious Emission below 1GHz (30MHz-1GHz)

Frequency Reading Level Antenna S.G.

Cable Loss

Ant.Gain Emission Level Limit Margin

(MHz) (dBuv/m) Polarization

(dBm) (dB) (dBi) (dBm) (dBm) (dB)

84.11 30.14 V -58.43 0.31 0.48 -58.26 -36 -22.26

84.54 30.26 V -61.84 0.36 0.26 -61.94 -36 -25.94

84.87 30.67 V -65.76 0.43 0.37 -65.82 -36 -29.82

84.63 29.95 V -63.29 0.53 0.68 -63.14 -36 -27.14

84.25 30.84 V -64.44 0.66 0.15 -64.95 -36 -28.95

84.39 31.26 V -68.53 0.73 1.18 -68.08 -54 -14.08

83.41 31.56 H -59.71 0.53 0.26 -59.98 -36 -23.98

130.67 30.12 H -62.58 0.38 0.52 -62.44 -36 -26.44

242.82 29.51 H -63.69 0.71 0.42 -63.98 -36 -27.98

325.95 30.36 H -66.42 0.46 0.41 -66.47 -36 -30.47

734.74 30.42 H -62.43 0.53 0.53 -62.43 -54 -8.43

827.45 30.53 H -63.88 0.64 0.37 -64.15 -54 -10.15


High Channel: Transmitter Spurious Emission below 1GHz (30MHz-1GHz)


Cable Loss


(MHz) (dBuv/m) Polarizati

on (dBm) (dB) (dBi) (dBm) (dBm) (dB)

86.26 30.14 V -58.27 0.31 0.48 -58.1 -36 -22.1

145.79 30.26 V -61.09 0.36 0.26 -61.19 -36 -25.19

242.65 30.67 V -65.74 0.43 0.37 -65.8 -36 -29.8

343.54 29.95 V -63.83 0.53 0.68 -63.68 -36 -27.68

385.29 30.84 V -64.62 0.66 0.15 -65.13 -36 -29.13

864.37 31.26 V -68.19 0.73 1.18 -67.74 -36 -31.74

82.31 31.56 H -59.22 0.53 0.26 -59.49 -36 -23.49

145.49 30.12 H -62.44 0.38 0.52 -62.3 -36 -26.3

252.21 29.51 H -63.63 0.71 0.42 -63.92 -36 -27.92

335.48 30.36 H -66.75 0.46 0.41 -66.8 -36 -30.8

647.54 30.42 H -62.87 0.53 0.53 -62.87 -54 -8.87

719.37 30.53 H -63.93 0.64 0.37 -64.2 -54 -10.2 Note: The margins of the other spectrum below 1GHz are not exceeding the minimum value of margin, and this part

of the results without recording in the test report.


Low Channel: Transmitter Spurious Emission above 1GHz (1GHz-12.75GHz)


Cable Loss


(MHz) (dBuv) Polarizati


4803.87 38.55 V -58.06 2.34 0.5 -59.9 -30 -29.9

-- -- V -- -- -- -- -- --

-- -- V -- -- -- -- -- --

-- -- V -- -- -- -- -- --

-- -- V -- -- -- -- -- --

-- -- V -- -- -- -- -- --

4804.52 38.78 H -59.31 2.38 0.52 -61.17 -30 -31.17

-- -- H -- -- -- -- -- --

-- -- H -- -- -- -- -- --

-- -- H -- -- -- -- -- --

-- -- H -- -- -- -- -- --

-- -- H -- -- -- -- -- --

Note: The margins of the other spectrum above 1GHz are not exceeding the minimum value of margin, and this part of the results without recording in the test report.


High Channel: Transmitter Spurious Emission above 1GHz (1GHz-12.75GHz)


Cable Loss




4961.18 39.62 V -61.79 2.23 0.63 -63.39 -30 -33.39

-- -- V -- -- -- -- -- --

-- -- V -- -- -- -- -- --

-- -- V -- -- -- -- -- --

-- -- V -- -- -- -- -- --

-- -- V -- -- -- -- -- --

4961.53 40.05 H -60.61 2.35 0.65 -62.31 -30 -32.31

-- -- H -- -- -- -- -- --

-- -- H -- -- -- -- -- --

-- -- H -- -- -- -- -- --

-- -- H -- -- -- -- -- --

-- -- H -- -- -- -- -- --

Note: 1.The margins of the other spectrum above 1GHz are not exceeding the minimum value of margin, and this part of the results without recording in the test report.

2. The emission behaviour belongs to narrowband spurious emission. 3. Measurements above show only up to 6 maximum emissions noted, or would be lesser, with “--” remark, if no specific emission from the EUT are recorded (ie: margin>20dB from the applicable limit) and considered that’s already beyond the background noise floor.

Conclusion: PASS


4.9. RECEIVER SPURIOUS EMISSIONS ETSI EN300328 SUBCLAUSE 4.3.2.10 Receiver spurious emissions are emissions at any frequency when the equipment is in receive mode. The spurious emissions of the receiver shall not exceed the values given in table 5. TEST CONFIGURATION Radiated Spurious Emissions: Same as section 4.4 in this test report TEST PROCEDURE 1. Please refer to ETSI EN 300 328 clause 5.3.11.1 for the test conditions. 2. Please refer to ETSI EN 300 328 clause 5.3.11.2.1 for the measurement methods. TEST RESULTS FOR RADIATED METHOD (N/A)


TEST RESULTS FOR CONDUCTED METHOD RECEIVER MODE (Low channel)

Freq (MHz) RMS Level (dBm)

Limit (dBm) Over Limit (dB) Status

846.473 -79.25 -57.00 -22.25 Pass

870.796 -79.57 -57.00 -22.57 Pass

876.537 -79.42 -57.00 -22.42 Pass

891.811 -79.21 -57.00 -22.21 Pass

896.968 -79.57 -57.00 -22.57 Pass

988.909 -79.32 -57.00 -22.32 Pass

1952.000 -64.03 -47.00 -17.03 Pass

1954.000 -64.09 -47.00 -17.09 Pass

5778.000 -65.06 -47.00 -18.06 Pass

5779.000 -64.80 -47.00 -17.80 Pass

9348.000 -64.96 -47.00 -17.96 Pass

12702.000 -64.62 -47.00 -17.62 Pass


RECEIVER MODE (High channel)

Freq (MHz) RMS Level (dBm)

Limit (dBm) Over Limit (dB) Status

436.583 -79.35 -57.00 -22.35 Pass

570.846 -79.13 -57.00 -22.13 Pass

570.943 -79.03 -57.00 -22.03 Pass

815.729 -79.08 -57.00 -22.08 Pass

846.473 -79.25 -57.00 -22.25 Pass

870.796 -79.57 -57.00 -22.57 Pass

876.537 -79.42 -57.00 -22.42 Pass

891.811 -79.21 -57.00 -22.21 Pass

896.968 -79.57 -57.00 -22.57 Pass

961.180 -79.55 -57.00 -22.55 Pass

988.909 -79.32 -57.00 -22.32 Pass

992.995 -79.05 -57.00 -22.05 Pass

1952.000 -64.03 -47.00 -17.03 Pass

1954.000 -64.09 -47.00 -17.09 Pass

5778.000 -65.06 -47.00 -18.06 Pass

5779.000 -64.80 -47.00 -17.80 Pass

9299.000 -65.26 -47.00 -18.26 Pass

9309.000 -64.57 -47.00 -17.57 Pass

9310.000 -64.96 -47.00 -17.96 Pass

9348.000 -64.96 -47.00 -17.96 Pass

12116.000 -65.09 -47.00 -18.09 Pass

12326.000 -64.63 -47.00 -17.63 Pass

12689.000 -65.19 -47.00 -18.19 Pass

12702.000 -64.62 -47.00 -17.62 Pass


Conclusion: PASS


TEST RESULTS FOR RADIATED METHOD Low Channel: Receiver Spurious Emission below 1GHz (30MHz-1GHz)


Cable Loss




98.12 31.35 V -84.57 0.52 0.39 -84.7 -57 -27.7

143.75 30.32 V -85.46 0.53 0.46 -85.53 -57 -28.53

225.16 30.45 V -83.25 0.47 0.52 -83.2 -57 -26.2

536.32 30.9 V -83.36 0.72 0.52 -83.56 -57 -26.56

651.75 30.03 V -84.27 0.46 0.63 -84.1 -57 -27.1

751.49 30.21 V -84.46 0.69 0.61 -84.54 -57 -27.54

89.25 31.56 H -82.21 0.53 0.26 -82.48 -57 -25.48

154.15 30.17 H -82.49 0.38 0.52 -82.35 -57 -25.35

236.74 29.51 H -84.27 0.71 0.42 -84.56 -57 -27.56

474.59 30.36 H -84.36 0.46 0.41 -84.41 -57 -27.41

504.26 30.42 H -84.14 0.53 0.53 -84.14 -57 -27.14

634.31 30.53 H -84.16 0.64 0.37 -84.43 -57 -27.43


High Channel: Receiver Spurious Emission below 1GHz (30MHz-1GHz)


Cable Loss




78.49 29.3 V -82.55 0.52 0.39 -82.68 -57 -25.68

171.11 31.35 V -84.39 0.53 0.46 -84.46 -57 -27.46

254.24 30.4 V -84.62 0.47 0.52 -84.57 -57 -27.57

354.31 30.6 V -83.88 0.72 0.52 -84.08 -57 -27.08

654.79 29.73 V -83.71 0.46 0.63 -83.54 -57 -26.54

715.53 30.21 V -82.25 0.69 0.61 -82.33 -57 -25.33

98.24 30.56 H -84.66 0.53 0.26 -84.93 -57 -27.93

152.19 31.12 H -83.17 0.38 0.52 -83.03 -57 -26.03

221.65 29.5 H -83.58 0.71 0.42 -83.87 -57 -26.87

324.74 30.36 H -82.69 0.46 0.41 -82.74 -57 -25.74

501.42 30.42 H -83.27 0.53 0.53 -83.27 -57 -26.27

652.8 30.53 H -82.48 0.64 0.37 -82.75 -57 -25.75 Note: The margins of the other spectrum below 1GHz are not exceeding the minimum value of margin, and this part

of the results without recording in the test report.


Low Channel: Receiver Spurious Emission above 1GHz (1GHz-12.75GHz)


Cable Loss




1755.38 35.3 V -64.41 2.81 0.53 -66.69 -47 -19.69

-- -- V -- -- -- -- -- --

-- -- V -- -- -- -- -- --

-- -- V -- -- -- -- -- --

-- -- V -- -- -- -- -- --

-- -- V -- -- -- -- -- --

2544.77 37.5 H -63.69 3.67 0.55 -66.81 -47 -19.81

-- -- H -- -- -- -- -- --

-- -- H -- -- -- -- -- --

-- -- H -- -- -- -- -- --

-- -- H -- -- -- -- -- --

-- -- H -- -- -- -- -- --


High Channel: Receiver Spurious Emission above 1GHz (1GHz-12.75GHz)


Cable Loss




1814.46 34.5 V -61.38 2.91 0.53 -63.76 -47 -16.76

-- -- V -- -- -- -- -- --

-- -- V -- -- -- -- -- --

-- -- V -- -- -- -- -- --

-- -- V -- -- -- -- -- --

-- -- V -- -- -- -- -- --

2541.82 35.5 H -64.59 3.36 0.55 -67.4 -47 -20.4

-- -- H -- -- -- -- -- --

-- -- H -- -- -- -- -- --

-- -- H -- -- -- -- -- --

-- -- H -- -- -- -- -- --

-- -- H -- -- -- -- -- --

Note: 1.The margins of the other spectrum above 1GHz are not exceeding the minimum value of margin, and this part of the results without recording in the test report.

2. The emission behaviour belongs to narrowband spurious emission.

3. Measurements above show only up to 6 maximum emissions noted, or would be lesser, with “--” remark, if no specific emission from the EUT are recorded (ie: margin>20dB from the applicable limit) and considered that’s already beyond the background noise floor.

Conclusion: PASS


4.10. RECEIVER BLOCKING ETSI EN300328 SUBCLAUSE 4.3.2.11 This requirement does not apply to non-adaptive equipment or adaptive equipment operating in a non-adaptive mode. In addition, this requirement does not apply for equipment with a maximum declared RF Output power level of less than 10 dBm e.i.r.p. or for equipment when operating in a mode where the RF Output power is less than 10 dBm e.i.r.p. Adaptive Frequency Hopping equipment shall comply with the requirements defined in clauses 4.3.1.6.1 (LBT based DAA) or 4.3.1.6.2 (non-LBT based DAA) in the presence of a blocking signal with characteristics as provided in table 3.

TEST PROCEDURE 1. Please refer to ETSI EN 300 328 clause 5.3.7.1 for the test conditions. 2. Please refer to ETSI EN 300 328 clause 5.3.7.2 for the measurement methods.

TEST RESULTS

N/A


APPENDIX A: PHOTOGRAPHS OF THE TEST SETUP

CONDUCTED SPURIOUS EMISSION TEST


APPENDIX B: PHOTOGRAPHS OF THE EUT TOTAL VIEW OF EUT

TOP VIEW OF EUT


BOTTOM VIEW OF EUT

FRONT VIEW OF EUT


BACK VIEW OF EUT

LEFT VIEW OF EUT


RIGHT VIEW OF EUT

OPEN VIEW OF EUT


VIEW OF EUT (PORT)

INTERNAL VIEW OF EUT-1




----END OF REPORT----

Antenna

RF Test Report - s3-ap-southeast-2. · PDF fileDate of test Feb.16,2016 to Feb.18,2016 We...

Documents

Transcript of RF Test Report - s3-ap-southeast-2. · PDF fileDate of test Feb.16,2016 to Feb.18,2016 We...