RF Series Touch Panel F4-5A.pdf · Advanced RF wireless sync/zone control technology, make sure...
Transcript of RF Series Touch Panel F4-5A.pdf · Advanced RF wireless sync/zone control technology, make sure...
1
Phase-cut
Touch panelEX1,EX1S,EX2,EX3,
EX3S,EX4,EX4S
EX3 EX4(RGB) (RGBW)
EX3S EX4S(RGB) (RGBW)
Series Touch Panel
EX1S(Dimming)
EX2 (CT)
Ma ualnwww.ltech-led.com
Wireless remote
Direct connect
Mobile phone WiFi gateway
Router
RF relay
Wirelessconnection
Wiredconnection
Wireless driver
Wireless driver
DMX driver
RF to DMX
RF 10V to 0-
RF to phase-cutTriac LED driver
0-10V LED driver
DMX LED driver
EX1(Dimming)
DMX512
RF
RF
DMX512
12-24Vdc
0-10V
●
●
●
●
●
●
100-240Vac
-20℃~55℃
L86×W86×H36(mm)
L113×W112×H50(mm)
225g
EX1 EX1S EX2
RCM certification No.: RCMP17114 001
RF 2.4GHz, DMX512
Product features
Technical specs
Weight(G.W.)
Model
Control type
Input voltage
Output signal
Working temp.
Dimensions
Package size
Dimming CT
Adopts capacitive touch control technology makes LED dimming selection more user-friendly.
Touch keys with chord and LED indicator.
Adopt RF and wired DMX512 protocol 2 in 1 control mode, more flexible and convenient for project installation.
wireless
Install touch panel at different areas, can control the same LED light, achieve multi-panelcontrol, no quantity limited.
Advanced RF wireless sync/zone control technology, make sure dynamic color modes synchronously among multiple drivers.
Compatible with remote and APP control.
2
EX3 EX4EX3S EX4S
warranty5 years
RGB RGBW
4886
8648
Installation instruction
Touch panel
Baseplate
Product size Unit: mm55
60
25
82
3
Uninstall
Typical base as below:
European style 86 size
Base
EX1S
Brightness
touch slider
ON/OFF
Brightness+
Brightness-
Brightness shortcut keys
Scene-modeShort press: playLong press: save
Terminals
When blue status light of key is on, long press to turn on/off buzzer.When white status light of key is on, long press to match code.
L N D+ D- GND
100-240Vpower input
ac DMX signaloutput
4 5
EX1 EX2
Key functions
Short press: playLong press: save
Brightness-
Scene-mode
Brightness
touch slider
ON/OFF
Brightness+
CT touch slider
ON/OFF
Brightness+
Scene-modePress: playLong press: save
Brightness-
When blue status light of key is on, long press to turn on/off buzzer.When white status light of key is on, long press to match code.
When blue status light of key is on, long press to turn on/off buzzer.When white status light of key is on, long press to match code.
EX3 EX4
Touch slider
ON/OFF
Brightness+
Scene-modeShort press: playLong press: save
Scene-modeShort press: playLong press: save
Brightness-
Saturation
EX3 panel’s 2 scene-mode keys are corresponding with WiFi-106 gateway APP’s 1 & 2 scene-mode key,the scenes can be changed by APP or panel.
EX4 panel’s 2 scene-mode keys are corresponding with WiFi-106 gateway APP’s 1 & 2 scene-mode key,the scenes can be changed by APP or panel.
White KeyPress: on/off
Long press: brightness
Touch slider
ON/OFF
Brightness+Brightness-
Scene-modeScene-modeShort press: playLong press: save
Short press: playLong press: save
6 7
EX3S EX4S
Brightness-Speed-
ON/OFF
Mode
Brightness+Speed+
Touch color circle
Scene-modeShort press: playLong press: save
Static RedStatic GreenStatic BlueStatic YellowStatic PurpleStatic CyanStatic WhiteRGB Jumping7 Colors JumpingRGB Color SmoothFull-color Smooth
1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11.
Mode
When blue status light of key is on, long press to turn on/off buzzer.When white status light of key is on, long press to match code.
When blue status light of key is on, long press to turn on/off buzzer.When white status light of key is on, long press to match code.
ON/OFF
Brightness-Speed-
Brightness+Speed+
Mode
Touch color circle
Static RedStatic GreenStatic BlueStatic YellowStatic PurpleStatic CyanStatic WhiteRGB Jumping7 Colors JumpingRGB Color SmoothFull-color SmoothStatic Blue(only close RGB)
1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12.
Mode
White keyPress: on/off
Long press: brightness
White light only: press key to choose black mode, then press key for white light.
8 9
Application composition
DMX System Wiring Wireless System Wiring
Match code sequence
Match Code Sequence
PS: No router needed when gateway works with phone directly.
*
1. Wireless driver &
2. Panel gateway. 3. Remote panel , remote & wireless driver.
gateway.
&
&
1. Configure with enables the smart phone to control DMX devices via .2. Configure remote with panel, which enables remote to control DMX devices.
gateway panel, which
gateway
Match Code Sequence
PS: No router needed when gateway works with phone directly.
*
APP
Router
Gateway
Panel
Wireless driver
Remote
Lamp
Lamp
DMX lamp
APP Remote
Router Panel DMX decoder
Gateway
1.
1.
2.
2.
4.
4.
3.
3.
+
+ +
+
+
++ + +
+
+
+
LampLamp
LampLamp
Lamp Lamp
LampLamp
+
+ +
+
+
++ + +
+
+
+
DMX512 control
ireless controlW
Touch panel
Touch panel
Touch panel
Touch panel
Touch panelTouch panel
Touch panel
DMX driver
DMX driver
DMX driver
DMX driver
Wirelessdriver
Wirelessdriver
Wirelessdriver
Wirelessdriver
Remote
RemoteRemote
Remote
WiFi master controller
WiFi master controller
WiFi master controller
WiFi master controller
Touch panel
Touch panel
DMX wiring
Remote
Touch panel
DMX Decoder
DMX Decoder
DMX Decoder
DMX Decoder
Model: LT-858-5A
Model: LT-858-5A
Model: LT-858-5A
DMX
DMX Address=1
DMX Address=1
DMX Address=1
DMX Address=1
Model: LT-858-5A
10
Strip
Strip
Strip
Strip
CV Power Supply
CV Power Supply
CV Power Supply
CV Power Supply
12-24Vdc
12-24Vdc
12-24Vdc
12-24Vdc
RF wireless wiring
Multiple wireless receivers (F4-3A/F4-5A/F4-CC/F4-DMX-5A/F5-DMX-4A) can be matched up with EX series touch panel within effective distance.
Remote
Touch panel
CV Power Supply
CV Power Supply
CV Power Supply
CV Power Supply
5-24Vdc
5-24Vdc
5-24Vdc
5-24Vdc
Wireless Driver
Wireless Driver
Wireless Driver
Wireless Driver
11
Strip
Strip
Strip
Strip
…
WirelessDriver
WirelessDriver
WirelessDriver
WirelessDriver
1. 2.
AB
(A)
Multi-panel control wiring Match code between touch panels
Match code between touch panel & remote
Assuming that B matches with A, long press on Buntil all indicator lights inall zones flicker.
Touch the slider on A within 15s, whenindicator lights of B stop flicking, match successfully.
EX1/EX1S works with remote F1.
EX2 works with remote F2.
EX3/EX3S works with remote F3.
EX4/EX4S works with remote F4.
Strip
StripCV Power Supply
CV Power Supply
5-24Vdc
5-24Vdc
WirelessDriver
WirelessDriver
12 13
(B) (C)
*
*
2. Press any key on remote, indicator light of touch panel stop flicking, match successfully.
EX3 EX4(RGB) (RGBW)
EX3S EX4S(RGB) (RGBW)
EX1
F1 F2 F3 F4
(Dimming)
(Dimming) (CT) (RGB) (RGBW)
EX1S( )Dimming
EX2 (CT)
After touch panel A realizes controlling the lamps, if B and C are matched up with A , they can also control the lamps.
Long press on touch panel until all indicator lights flicker.
Please match/clear code when status light of panel is white.
Linkage control is also available at connecting with DMX decoders.
Match code between touch panel & gateway
2.
1. 2. 3. 4.
Turn on APP, Click “ZONE” key to enter “zone set” interface, click the right top “MATCH” key, then operate following the prompt.
1. Long press on touch panel until indicator lights flicker.
EX3 EX4(RGB) (RGBW)
EX3S EX4S(RGB) (RGBW)
EX1(Dimming)
EX1S( )Dimming
EX2 (CT)
Match code between Touch Panel & wireless driver
Method 1:
Wireless driverWireless driver
Touch panels can work with wireless driver F4-3A/F4-5A/F4-CC./F4-DMX-5A/F5-DMX-4A.
Short press any key or color circle/slider, match successful.
Power off the driver.
Long press On/Off key of the panel until all indicator light flicking.
Power on the driver, the lamps flicker slowly, please complete step 4 within 15s.
15www.ltech-led.com Update Time: 2019.01.24_A0
Clear code
Press the bottom two key on touch panel simultaneously for 6s, the indicator lights flicker several times, clear code successfully.
Please match/clear code when status light of panel is white.
Please match/clear code when status light of panel is white.
14
1. 2. 3.
Wireless driver
Method 2:
Short press “ID learning button” on EBOX-AD, the lamps flicker, please complete step 2 within 15s.
Long press On/Off key on panel until all indicator light flicker.
ID learning button
Short press any key or colorcircle/slider, match successful.
No further notice if any changes in the manual.Product function depends on the goods. Please feel free to contact our official distributor if any question.