1

VIKASH KUMAR JHAC/O Mr.T.N.UpadhyayaG-1, Sanjay Gandhi Puram,Near Lekhraj market, Faizabad RoadLucknow- 226016 (Uttar Pradesh)Contact:+91-9616555333, +91-8765681580E-mail:vkrf88@gmail.com

OBJECTIVE

A highly motivated and committed Engineering Professional with a proven ability to effectively evaluate, organize and prioritize work within a overall project schedule reporting to Project delivery Manager, a quick learner and passionate about Communication Technologies.

PROFILE

B-Tech in Electronics & communication engineering with More than 6 years of technical experience in Telecom Industry.

Core capabilities in conducting Network Optimization in LTE, CDMA, GSM, Technologies thus evaluating particular area with regard to its clutter and density of traffic leading to problem resolution.

Worked With Companies like Ericsson India Ltd, Samsung Electronic Pvt. Ltd., Ada Cell Technologies Pvt. Ltd., Integrated Cellular Services Pvt. Ltd, TNS Pvt. Ltd, GTL Ltd., Nutek India Ltd., L&G Telecom Solutions as a RF Coordinator/RF Optimization Engineer.

PROFESSIONAL & TECHNICAL RESPONSIBILITIES

Presently associated with LTE Site Optimization of Bharti Airtel Project Assam through Ericsson India Ltd. Perform overall Site/Cluster optimization for commercial LTE networks. Conducting SCFT and CLOT Drive for LTE 4G Jio Project and Bharti Project Establishing and analysing the requirements of LTE solution. Analysing report of SCFT and resolving the issue like poor RSRP, SINR, and RSRQ. Conducting AAT for 4G Troubleshooting the problem areas and providing recommendation for the systems performance

enhancements. Generate field test plans. According to the project scope, to coordinate with the team members and

organizing and monitoring the testing directly. Support KPI before and after site launches, troubleshoot and escalate as needed for the resolution. Optimization of GSM sites based on parameter like Rx level, Quality, Ec/Io etc. Making Report on the basis of Drive test log Optimization of CDMA sites based on parameter like Rx Level, Tx Power, Ec/Io, FER, PN etc Site Auditing and verifying hardware, Tilt, Antenna Height and Orientation according to the site database. Analysed the drive test log files using various drive test tool like TEMS, CNT-CNA, X-Cal, GENEX Probe, to

find the swap, Interference, Missing Neighbours etc. in the site Preparing Report of drive test on required tool. Performing optimization like detection and rectification of Swap by manual tracing, changing antenna tilts

and orientation on the basis of clutter, to remove interference. Identify the reasons for Handover failures. Conducting night activities like call testing, site swapping, software up-gradation etc. Solving customer complain issues related with mobile network. Done RF drive in dedicated and idle mode along with short and long calls. Candidate selection & project coordination. Proficient in handling various drive test & data processing tools. Providing processed data to project manager & providing suggestion on network optimization.

PROFESSIONAL EXPERIENCE

2

December 2015 to Till Date Working as RF Optimization Engineer- 4G RF Eng. with Ericsson India Ltd. (Off-roll) Guwahati (Assam)Project Detail: Ericsson – Bharti Airtel Rollout Project, Guwahati (Assam)Technology : LTE

Responsibilities:

Excellent Knowledge of LTE fundamental and Architecture. Presently associated with LTE sites optimization for Bharti Airtel Operator.

Analysis of Network performance and carrying out necessary optimization in the database and hardware side to meet KPI.

Responsible for Conducting LTE Drive Test & Drive Based Optimization Activity Maintenance of LTE KPI SCFT & Cluster for Entire Assam Performance Monitoring by Means of Hardware Alarm & its rectification from BSS In LTE Maintaining radio network in terms of RSSI,RSRP,RSRQ, And RRC Setup Success Rate,

Handoff & Traffic analysis by physical optimization or by Different Transmission Mode, MIMO Technology. Responsible for SCFT Signoff, Cluster Signoff for Entire Assam. Analyzing report of CLOT & SCFT drive test on TEMS and provide the solution to DT Team for better output. Carry out basic parameter checks such as RSRP, SINR and Throughput during drive test. Provide training for Field testing, analytical processes. Worked on weekly and monthly meeting with customer to deliver all RF project activity as per SLA. Generate field test plans according to the project scope. LTE Network Radio Features, service enhancements and testing of new features like Volte, CSFB etc. Coverage, quality and capacity optimization and enhancement through parameter and physical

optimization. Responsible for preparing daily roll out plan for execution of testing activities. Actively involved in LTE sites audit and optimizing the area for better SINR and RSRP. Dynamically involved in co-ordination and delivering the results for SCFT and Cluster Drive.

September 2015 to Nov 2015 Working as an RF Optimization Engineer- 4G RF Eng. with Samsung Electronic India Ltd. Patna (Bihar)Project Detail: Samsung – Reliance Jio Rollout Project, Patna (Bihar)Technology : LTE

Responsibilities:

Excellent Knowledge of LTE fundamental and Architecture. Presently associated with LTE sites optimization for Reliance Jio Operator.

Actively involved in LTE sites audit and optimizing the area for better SINR and RSRP. Achieved good throughput with different scenarios 5, 10 and 20 Mhz BW. Successfully delivered the SCFT process with strict timelines and co-ordinated with team for optimal

targets. Responsible for Bihar Jio Network Audit comprising of overall network quality and network coverage. Dynamically involved in co-ordination and delivering the results for SCFT and Cluster Drive. Handling team for achieving the KPI targets to maintain the network coverage and quality. Recommendation of special solutions for enhancing the coverage. Responsible for periodic network audit comprises of quarterly LTE RF parameter Audit, Cluster drive,

Cluster KPIs. Analysis of cluster drives and providing solutions for drop cases, Throughput issues. Carry out basic parameter checks such as RSRP, SINR and Throughput during drive test. Join the bridge with DT team and Co-ordinate with teams as well as perform the test. Analyzing report of CLOT drive test on Actix and provide the solution to DT Team for better output. Directly interfacing with customers to report KPI results and status of the optimization activities measuring

the parameters RSSI, RSRP, RSRQ and SINR.

February 2015 to September 2015 Working as an RF Optimization Eng. - 4G RF Eng. with ADA Cell Technology Pvt. Ltd. Lucknow (UP-E)Project Detail: Samsung – Reliance Jio Rollout Project, Patna (Bihar)Technology : LTEResponsibilities:

3

Beginning the project with thorough understanding of the client’s requirements, going with the priority of the sites to be passed within certain deadlines.

Responsible for troubleshooting the low-throughput issues, working with NDS team Overcome the issues of Swap-Feeder, by working the Integration team. Do analysis on the integration of the sites with the 4G technology by performing the Cluster drives and

analyzing those results. Directly interfacing with the customers to report KPI results and status of the optimization activities

measuring the parameters RSSI, RSRP, RSRQ, and SINR. Troubleshooting the problem areas and providing recommendation for the systems performance

enhancements.  Conducting SCFT of LTE (Reliance 4G) site as per the plan provided by the customer. Resolving issues arise during SCFT. Analyzing report of SCFT and CLOT drive on Actix and provide solution to DT Team for better output.

Jan 2014 to Jan 2015 Working as an Engineer- 2G RF Eng. with Integrated Cellular Services Pvt. Ltd, Patna (Bihar)Project Detail: Nokia – Vodafone Project, Patna (Bihar)Technology : GSM

Responsibilities:

Conducting Drive test including SCFT & Expansion site drive. Preparing presentation Plots for various radio parameters like Rx level, Rx quality, Candidate Selection & Project Coordination. Providing processed data to Project Manager & providing suggestion on Network Optimization. Analyze drive test data using Actix. Maintained & tracked daily activities and produced report. Executed drive testing & perform optimization activities by analyzing drive test data. Handling Customer complaints regarding indoor coverage, Speech Quality issues. Routine comparative drive test with other operators to improve the network. Recommendations for height reduction of existing sites and relocation antenna, antenna type change to

meet KPI. Routine area wise drive test to improve the signal strength and quality of that area. Achieving the target of completing the SCFT beyond the timeline. Directly coordinating with customer for submitting and acceptance of report in given timelines.

July 2013 to Jan 2014 Working as an Engineer- 2G RF Eng. with TNS Pvt Ltd UP (E)Project Detail: Ericsson – Uninor Rollout Project, Lucknow, UP (E)Technology : GSMResponsibilities:

Using TEMS observing the particular cell parameters such as Rx level, BCCH, SQI, Ec/Io, C/I etc Done drive for new sites using TEMS Drive testing Kits in idle and dedicated modes for single and cluster

sites. Database verification and neighbour audit for newly commissioned sites. Done drive tests for Mobile GSM in complained areas to locate and solve the problem. Drive test including SCFT & Expansion site drive. Report preparation for final submission as per client interest using MapInfo. Responsible for performing the drive for the network at regular intervals to check the Quality of Service &

checking system parameters like  BCCH, neighbors lists, antenna orientations & tilt to achieve better coverage, call quality & network capacity.

Preparing presentation Plots for various radio parameters like Rx level, Rx quality, C/I, C/A. Performing optimization like detection and rectification of Swap by manual tracing, changing antenna tilts

and orientation on the basis of clutter, to remove interference. Executed drive testing & perform optimization activities by analyzing drive test data.

June 2012 to June 2013 Working as an Engineer- 2G RF Eng. with Nutek India Ltd. UP (E)Project Detail (i): ZTE – TATA CDMA Rollout Project, Lucknow, UP (E)Technology : CDMA

Responsibilities:

Optimization of CDMA Voice and EVDO cell sites.

4

Using CNT observing the particular cell parameters for Voice and EDO such as Rx Level, Tx Level, Ec/Io, FER, PN, SINR, PER, DRC, throughput etc.

Have done FTP testing using File zilla. Setup the Call Sequence in CNT for both 2G Speeches and EVDO. Drive Test Route design using MapInfo Data collection/Drive testing of 2G Speech and EVDO field data by drive. Can find the existing partial or full cross feeder & can give suggestion to the installation team for

eliminating cross feeder. To perform Cluster Drive and Post Processing of Log Files. Responsible for Planning Per/Post Optimization Activities. Verify Handoff functionality between the sectors having a particular PN & rectify overshooting problem. Perform Freeway Drive bimonthly according to customer demand.

February 2011 to May 2012 Working as an Engineer- 2G RF Eng. with GTL Ltd. UP (E)Project Detail (i): Huawei – Reliance Rollout Project, Lucknow, UP (E)Technology : GSM

Responsibilities:

Pre-processing & Post processing Drive Test using GENEX Probe and analysis of different parameters such as RX Level, RX Quality, SQI, C/I etc.

Done RF Drive in DEDICATED/IDLE mode along with SHORT & LONG CALLS. Site Auditing and Verifying Hardware, Tilt, Antenna height and Orientation, According to the site database Data collection/Drive Testing of 2G Speech and GPRS/ EDGE field data by drive Make report and Post Processing and analysing call drops, call setup failure by Actix. Verify Handover functionality between the sectors. Verify Swap and remove the swap successfully. Analyzed the Drive test log files using Actix. Find the swap, Interference in the sites during the

optimization & resolve the swap. Identified causes of poor coverage, and made recommendations about the orientation changes, Electrical

and Mechanical tilt or Antenna Height etc. Preparing presentation Plots for various radio parameters like Rx level, Rx quality, C/I, C/A. Physical verification, Verify correct sector identification based upon design

Project Detail (ii): Huawei – MTS Rollout Project, Lucknow, UP (E)Technology : CDMA

Responsibilities:

Optimization of CDMA Voice and EVDO cell sites. Using X-CAL observing the particular cell parameters for Voice and EDO such as Rx Level, Tx Level, Ec/Io,

FER, PN, SINR, PER, DRC, throughput etc. Have done FTP testing using File zilla. Setup the Call Sequence in X-CAL for both 2G Speeches and EVDO. Drive Test Route design using MapInfo Data collection/Drive testing of 2G Speech and EVDO field data by drive. Can find the existing partial or full cross feeder & can give suggestion to the installation team for

eliminating cross feeder. To perform Cluster Drive and Post Processing of Log Files. Perform Walk Test for Metro/Malls. Responsible for Planning Per/Post Optimization Activities. Verify Handoff functionality between the sectors having a particular PN & rectify overshooting problem. Database verification and neighbour audit for newly commissioned sites.

Project Detail: (iii) Alums– RELIANCE, Meerut UP (W)Technology : CDMA

Responsibilities:

Optimization of CDMA Voice and EVDO cell sites. Using X-CAL observing the particular cell parameters for Voice and EDO such as Rx Level, Tx Level, Ec/Io,

FER, PN, SINR, PER, DRC, throughput etc. Have done FTP testing using File zilla. Setup the Call Sequence in X-CAL for both 2G Speeches and EVDO. Drive Test Route design using MapInfo

5

Data collection/Drive testing of 2G Speech and EVDO field data by drive. Can find the existing partial or full cross feeder & can give suggestion to the installation team for

eliminating cross feeder. To perform Cluster Drive and Post Processing of Log Files. Perform Walk Test for Metro/Malls. Responsible for Planning Per/Post Optimization Activities. Verify Handoff functionality between the sectors having a particular PN & rectify overshooting problem. Perform Freeway Drive bimonthly according to customer demand. Database verification and neighbour audit for newly commissioned sites.

Project Detail: (iv) ZTE– MTS, HydarabadTechnology : CDMA

Responsibilities:

Perform Drive test including SCFT and Cluster drive using CNT. Site Auditing and Verifying Hardware, Tilt, Antenna height and Orientation, According to the site database Optimization of CDMA sites based on Coverage, Rx Level, FER, Ec/Io etc. Proposing new sit after analysis of coverage issue.  Resolution and investigation of radio related customer complaints.  Review RF Parameters of Cell Sites. Capture Drive Test Data & Post Processing.  After collect the data and process the data in CNA and check EVDO Low DRC Rate Analysis, EVDO

Dominant Pilot PN, and SINR, Throughput etc. To check the coverage of radio cells & compare it with coverage prediction. Verify the drive test

parameters defined by the operators. Analysing call drop, handoff failure and coverage issues. Ability to analyse the cell data of each sector Including Azimuth Tilt, PN etc. Handling all RF related customer complaints by checking/inspecting serving BTS site. Preparing log file and forwarding it to the optimization Engineer.

July 2010 to January 2011Working as an Engineer- 2G RF Eng. with L&G Engineering ServicesProject Detail: i) GTL-Huwaii – Data-Com(Videocon), Lucknow UP (E)Technology : GSM

Responsibilities:

Pre-processing & Post processing Drive Test using GENEX Probe and analysis of different parameters such as RX Level, RX Quality, SQI, C/I etc.

Done RF Drive in DEDICATED/IDLE mode along with SHORT & LONG CALLS. Site Auditing and Verifying Hardware, Tilt, Antenna height and Orientation, According to the site database Data collection/Drive Testing of 2G Speech and GPRS/ EDGE field data by drive Make report and Post Processing and analysing call drops, call setup failure by Actix. Verify Handover functionality between the sectors. Verify Swap and remove the swap successfully. Analyzed the Drive test log files using Actix. Find the swap, Interference in the sites during the

optimization & resolve the swap .Missing neighbors, Soft Handover using drive test data’s. Identified causes of poor coverage, and made recommendations about the orientation changes, Electrical

and Mechanical tilt or Antenna Height etc.

TOOLS Map Info GENEX Assistant (1.53, 2.2,3.2), GENEX Probe (1.53, 2.2, 2.3,3.2) X-CAL Actix CNT-CAN TEMS 8.1,11.2 7.3 X-Cap

EDUCATIONAL & PROFESSIONAL CREDENTIALS

6

Bachelor of Technology in Electronics & communication Engineering (B.Tech ECE)from Sagar Institute of Technology & Management, Barabanki passed out in June 2010 with 70.14%.

S.S.C. (Class 10th) from CBSE BOARD passed out in 2003 with 82%. H.S.C. (Class 12th) from CBSE BOARD passed out in 2005 with 69%.

PERSONAL DETAILS

Father Name : Madan Mohan JhaDate of Birth : 10-Aug-1988Sex : MaleMarital Status : SingleNationality : IndianPassport No. : L2910291Languages Known : English & Hindi

Declaration:

I hereby declare that all the above-mentioned details are true to the best of my knowledge.

Date: ____/____/____

Place: Lucknow (Vikash Kumar Jha)