Reynolds Advance Materials Catalog[1]

Reynolds Advanced Materials

LLiivviinngg iinn TThhee MMaatteerriiaall WWoorrlldd

REYNOLDS ADVANCED MATERIALS • www.moldmakingmaterials.com

More Than Just More Than Just AA Materials Supplier . . . Materials Supplier . . . Reynolds Advanced Materials has been living in the material world since 1963.

We can help you turn your idea into a physical reality by showing you a world

of materials that can do things you never thought possible.

We specialize in helping people like you convert concepts and project designs

to a finished product. Our expertise can guide you to the right material and/or

equipment for just your project. So talk to us. We'll point you in the right

direction for your project and send you on your way into the material world.

CONTENTSCONTENTSUrethane Rubber-------------------------------------------------------------------------------------------3Urethane Rubber-------------------------------------------------------------------------------------------3

Silicone Rubber--------------------------------------------------------------------------------------------4Silicone Rubber--------------------------------------------------------------------------------------------4

Liquid Plastics-------------------------------------------------------------------------------------------5-6Liquid Plastics-------------------------------------------------------------------------------------------5-6

Epoxy TEpoxy Tooling Compounds-----------------------------------------------------------------------------6ooling Compounds-----------------------------------------------------------------------------6

Flexible & Rigid Foams----------------------------------------------------------------------------------7Flexible & Rigid Foams----------------------------------------------------------------------------------7

SSpraying Rubberpraying Rubber, Plastic & Foam--------------------------------------------------------------------7, Plastic & Foam--------------------------------------------------------------------7

Life Casting Materials------------------------------------------------------------------------------------8Life Casting Materials------------------------------------------------------------------------------------8

Polymer Modifiers-----------------------------------------------------------------------------------------8Polymer Modifiers-----------------------------------------------------------------------------------------8

Clays & WClays & Wax-------------------------------------------------------------------------------------------------9ax-------------------------------------------------------------------------------------------------9

Release Release AgentAgents---------------------------------------------------------------------------------------------9s---------------------------------------------------------------------------------------------9

Instructional, Seminars----------------------------------------------------------------------------------9Instructional, Seminars----------------------------------------------------------------------------------9

GypGypsum & Plaster----------------------------------------------------------------------------------------10sum & Plaster----------------------------------------------------------------------------------------10

Epoxy Epoxy Adhesives-----------------------------------------------------------------------------------------1Adhesives-----------------------------------------------------------------------------------------111

Mold Making & Casting Mold Making & Casting Accessories------------------------------------------------------------1Accessories------------------------------------------------------------11-121-12

2

ADVANTAGES - Used for hundreds of industrial and art-

related applications, urethane rubbers are the easiest to use of all

mold rubbers. They can be poured, brushed on or sprayed onto

most prepared surfaces and cure with negligible shrinkage. They

are economical, reproduce exceptional detail and are best suited for

production casting of concrete, gypsum and wax.

Available in Shore hardnesses of 10A - 95A.

POURABLE MIX RATIO POT LIFE VISCOSITY DEMOLD DUROMETER COLOR CU .IN/ LB. TEAR STR. ELONG./BRK

ReoFlex 20 1:1 pbv 30 min. 1800 cps 16 hrs. 20A Off-White 26.7 50 pli 1000%





VytaFlex 10 1:1 pbv 30 min. 800 cps 16 hrs. 10A Clear Amber 27.9 30 pli 1000%

VytaFlex 20 1:1 pbv 30 min. 1000 cps 16 hrs. 20A Clear Amber 27.7 35 pli 1000%

VytaFlex 30 1:1 pbv 30 min. 1800 cps 16 hrs. 30A Off-White 27.3 68pli 1000%

VytaFlex 40 1:1 pbv 30 min. 2000 cps 16 hrs. 40A Off-White 26.9 60 pli 660%



PMC-121/30 1:1 pbv 30 min. 1800 cps 16 hrs. 30A Clear Amber 27.7 82 pli 1000%

PMC-121/50 1:1 pbv 30 min. 1400 cps 16 hrs. 50A Clear Amber 26.7 85 pli 500%

PMC-724 1:10 pbw 20 min. Variable 16 hrs. 40A Clear Amber Variable 90 pli 90%

PMC-726 1:10 pbw 25 min. Variable 16 hrs. 60A Clear Amber 20.4 100 pli 400%

PMC-744 2:1 pbv 15 min. 3400 cps 16 hrs. 44A Clear Amber 27.5 90 pli 400%




Brushable

Brush-On 40 1:1 pbv 20 min. Brushable 16 hrs. 40A Off-White 23.6 60 pli 1000%



Sprayable

EZ~Spray 45 1:1 pbv Sprayable 16 hrs. 45A Blue 2 80 pli 400%


Urethane Liquid Rubber OverviewUrethane Liquid Rubber Overview

3

DISADVANTAGES - Urethane rubbers

are adhesive and, without proper surface

preparation (sealer and release agent), will

bond to many surfaces. Urethanes are also

moisture sensitive, meaning that relatively dry

environments are necessary for mold making

success.

Most Products Are Available in Trial, Gallon, 5-Gallon and Drum Units.

ADVANTAGES - Silicones offer advantages for

many applications that no other mold rubber can match. Silicone

will not stick to most surfaces, so surface preparation is minimal.

They can be poured, brushed-on, applied by hand or sprayed.

Silicones offer good chemical and heat resistance, making them

the best choice for production casting of chemically harsh resins

or castable metals. Some can be applied directly to the skin.

Available in Shore hardnesses of 0010A - 50A, silicone rubber is

used for making molds, creating special effects, orthotic/ortho-

pedic applications and much


TIN-CURE MIX RATIO POT LIFE VISCOSITY DEMOLD DUROMETER COLOR CU .IN/ LB. TEAR STR. ELONG./BRK

Mold Max 10 100:10 pbw 45 min. 15,000 cps 24 hrs. 10A Light Pink 24.1 90 pli 375%

Mold Max 20 100:10 pbw 90 min. 20,000 cps 24 hrs. 20A Light Pink 23.1 60 pli 450%

Mold Max 30 100:10 pbw 60 min. 30,000 cps 24 hrs. 30A Pink 23.4 125 pli 400%

Mold Max 40 100:10 pbw 45 min. 35,000 cps 24 hrs. 40A Mint Green 23.5 100 pli 225%

OOMOO 25 1:1 pbv 10 min. 4,250 cps 75 min. 25A Blue 20.6 40 pli 250%

OOMOO 30 1:1 pbv 30 min. 4,250 cps 6 hrs. 30A Lavender 20.6 40 pli 250%

Poyo Putty 30 20:1 pbv 5 min. Putty 30 min. 30A Light Pink 22.0 90 pli 300%

Poyo Putty 40 20:1 pbv 5 min. Putty 30 min. 40A Light Pink 22.0 90 pli 300%

Rubber Glass 2:1 pbv 15 min. 200 cps 1 hr, 32A Clear 28.5 N/A N/A

PLATINUMSmooth-Sil 910 100:10 pbw 20 min. 7,000 cps 6 hrs. 10A Off-White 24.0 50 pli 450%

Smooth-Sil 920 1:1 pbv 30 min. 20,000 cps 4 hrs. 20A Translucent 23.5 100 pli 400%

Smooth-Sil 930 100:10 pbw 45 min. 40,000 cps 24 hrs. 30A Blue 24.0 110 pli 400%

Smooth-Sil 940 100:10 pbw 20 min. 35,000 cps 24 hrs. 40A Pink 23.4 100 pli 300%

Smooth-Sil 950 100:10 pbw 45 min. 35,000 cps 24 hrs. 50A Blue 22.3 155 pli 320%

Sorta-Clear 40 100:10 pbw 60 min. 35,000 cps 16 hrs. 40A Translucent 27.8 120 pli 400%

Dragon Skin 1:1 pbv 20 min. 23,000 cps 5 hrs. 10A Translucent 25.8 100 pli 1000%

Dragon Skin Q 1:1 pbv 8 min. 23,000 cps 75 min. 10A Translucent 25.8 100 pli 1000%

Rebound 25 1:1 pbv 20 min. Brushable 6 hrs. 25A Orange 23.5 102 pli 690%

EcoFlex 00-10 1:1 pbv 45 min. 14,000 cps 4 hrs. 00-10 Translucent 26.6 22 pli 800%

EcoFlex 00-30 1:1 pbv 45 min. 7,000 cps 4 hrs. 00-30 Translucent 26.0 55 pli 900%

EcoFlex 5 1:1 pbv 1 min. 13,000 cps 5 min. 5A Translucent 25.8 75 pli 900%

Equinox 25 1:1 pbv 1 min. Putty 7 min. 25A Blue 21.5 120 pli 400%

Equinox 35 1:1 pbv 1 min. Putty 7 min. 35A Light Purple 21.3 140 pli 430%

Equinox 50 1:1 pbv 1 min. Putty 7 min. 50A Yellow 21.3 165 pli 300%

Body Double Std. 1:1 pbv 5 min. Brushable 30 min. 25A Purple 23.7 100 pli 500%

Body Double Fast 1:1 pbv 90 sec. Brushable 5 min. 25A Green 23.7 100 pli 500%

EZ~Spray Silicone 1:1 pbv 1.5 min. Sprayable 15 min. 35A Blue 24.1 100 pli 415%

Silicone Liquid Rubber OverviewSilicone Liquid Rubber Overview

4

DISADVANTAGES - Silicones (especially plat-

inum-cure) are expensive. Most silicones require

precise measurement (gram scale) and vacuum

degassing before pouring. Silicones are more eas-

iliy inhibited by surface contaminates vs. other

rubbers. Tin-cure silicones are not archival vs.

other rubbers.



Urethane Liquid Plastic OverviewUrethane Liquid Plastic Overview

5

SEMI-RIGID MIX RATIO POT LIFE VISCOSITY DEMOLD DUROMETER COLOR CU .IN/ LB. TENSILE

Smooth-Cast 45D 1:1 pbv 5 min. 500 cps 20 min. 45D Amber 26 1,500 psi

Smooth-Cast 60D 1:1 pbv 5 min. 300 cps 20 min. 60D Amber 26 1,800 psi

Smooth-Cast 61D 1:1 pbv 7 min. 300 cps 60 min. 60 D Amber 26 1,800 psi

RIGID

Smooth-Cast 70D 1:1 pbv 4 min 400 cps 15 min. 70D Tan 25.9 3,600 psi

Smooth-Cast 300Q 1:1 pbv 1 min. 80 cps 4-5 min. 70D White 26.6 3,000 psi

Smooth-Cast 300 1:1 pbv 3 min. 80 cps 10 min. 70D White 26.6 3,000 psi

Smooth-Cast 305 1:1 pbv 7 min. 80 cps 30 min. 70D White 26.6 3,000 psi

Smooth-Cast 310 1:1 pbv 15-20 min. 80 cps 2-4 hrs. 70D White 26.6 3,000 psi

Smooth-Cast 316 100:90 pbw 20 min. 600 cps 16 hrs. 80D White 26.7 2,500 psi

Smooth-Cast 320 1:1 pbv 3 min 80 cps 10 min. 70D Off-White 26.6 3,000 psi

Smooth-Cast 321 1:1 pbv 7-9 min. 80 cps 30 min. 70D Off-White 26.6 3,000 psi

Smooth-Cast 322 1:1 pbv 15-20 min. 80 cps 2-4 hrs. 70D Off-White 26.6 3,000 psi

Smooth-Cast 325 1:1 pbv 2.5 min. 100 cps 10 min. 70D Clear Amber 27.7 3,170 psi

Smooth-Cast 326 1:1 pbv 7-9 min. 100 cps 30 min. 70D Clear Amber 27.7 3,170 psi

Smooth-Cast 327 1:1 pbv 10-20 min. 100 cps 2-4 hrs. 70D Clear Amber 27.7 3,170 psi

Smooth-Cast 385 1:5 pbw 20 min. 3,000 cps 8 hrs. 85D Beige 17.3 3,000 psi

C-1508 26:100 pbw 20 min. 4,400 cps 16 hrs. 88D Metal Gray 17.6 6,200 psi

Plasti-Paste 1:31 pbv 10 min. Paste 90 min. 70D Off-White 26.8 2,575 psi

Feather Lite 1:1 pbv 8.5 min. 410 cps 2 hrs. 58D Beige 41 2,160 psi

StyroCoat Spray 1:1 pbv 2 seconds Variable 1 hr. 80D Off-White 24.7 2,469 psi

EZ~Spray Plastic 1:1 pbv 2 seconds Variable 1 hr. 80D Off-White 24.7 2,469 psi

Crystal Clear 200 100:90 pbw 20 min. 600 cps 16 hrs. 80D Clear 26.7 2,500 psi

Crystal Clear 202 100:90 pbw 9 min. 600 cps 90 min. 80D Clear 26.7 2,500 psi

Crystal Clear 204 100:90 pbw 2 hrs. 600 cps 48 hrs. 80D Clear 26.7 2,500 psi

Crystal Clear 206 100:90 pbw 3 hrs. 600 cps 48hrs. 80D Clear 26.7 2,500 psi

Crystal Clear 220 100:75 pbw 22 min. 675 cps 4 hrs. 85D Clear 25.9 8,190 psi

SMASH! Plastic 1:1 pbv 5 min. 900 cps 1.5 hrs. 80D Clear 26.7 N/A

ADVANTAGES - Urethane plastics offer the user

tremendous versatility and economy. They are easy to

use and are available as rigids or semi-rigids. You can

add different colors and/or fillers for an infinite variety of

mind-blowing effects. Perfect for creating special effects

and making models, toys, props, industrial parts, etc.

DISADVANTAGES - Urethanes are higher in price

than polyester resin (but without the health issues).

Urethanes are also moisture sensitive, so reasonably dry

environments are necessary to minimize contamination.

Some urethane plastics may not be compatible with

some silicone rubber products.


Many applications call for materials with higher physical and performance properties. TASK Plastics are a step

up from the Smooth-Cast line of general purpose plastics. Do you need higher heat distortion temperatures, strength in

ultra-thin sections, high impact or abrasion resistance or better resistance to moisture? TASK Plastics were developed

with these applications in mind, and more. There are several TASK Plastics to choose from, and each is easy to use

(convenient mix ratio and low viscosity). Ask your Reynolds rep. which TASK Plastic is right for your project.


RIGID & SEMI MIX RATIO POT LIFE VISCOSITY DEMOLD DUROMETER COLOR CU .IN/ LB. TENSILE STR.

TASK 2 1:1 pbv 7 150 cps 1 hr. 80 White 24.7 6,650 psi

TASK 3 1:1 pbv 20 150 cps 1.5 rs 80 White 24.7 6,650 psi

TASK 4 1:1 pbv 20 250 cps 16 hrs. 83 Ivory 24 6,500 psi

TASK 5 1:1 pbv 3 600 cps 15 min. 80 Tan 24.5 3,900 psi

TASK 6 1:1 pbv 7 800 cps 75 min. 80 Tan 26 5,500 psi

TASK 7 1:1 pbv 7 80 cps 30 min. 70 Off-White 2606 3,170 psi

TASK 8 1:1 pbv 2.5 650 cps 10-15 min. 80 Off-White 27.7 7,200 psi

TASK 9 1:1 pbv 7 300 cps 1 hr. 85 Clear Amber 24.3 7,800 psi

TASK 12 100:44 pbw 20 2,400 cps 16 hrs. 60 Clear Amber 26 2,720 psi

TASK 15 75:100 pbw 6 600 cps 75 min. 75 Opaque White 24.7 2,720 psi

TASK 21 2:1 pbv 6 500 cps 75 min. 75 White 25.8 5,500 psi

6

Urethane Liquid Plastic Overview Urethane Liquid Plastic Overview (continued)(continued)

Epoxy TEpoxy Tooling Compoundsooling Compounds

Epoxies MIX RATIO POT LIFE VISCOSITY DEMOLD DUROMETER COLOR CU .IN/ LB. TENSILE STR.

PT1105 Varies 20 min. Paste 10-12 hrs. 90D White N/A 6,300 psi

PT1414 100:10 pbw 30 min. 50,000 cps 24 hrs. 90D Blue 16.2 17,400 psi

PT1554 100:12 pbw 25 min. 106,000 cps Varies 90D Gray 19.5 9,850 psi

PT1945 100:10 pbw Varies 150,000 cps Varies 90D Black 19.1 N/A

PT1995 100:13 pbw 50 min. 40,000 cps Varies 89D Black 19.9 7,690 psi

PT2114 100:16 pbw 30-60 min. 3,100 cps 24 hrs. 88D White 20.1 29,200 psi

PT2846 Varies Varies 5,000 cps 24 hrs. 90D Amber 23.6 30,000 psi

PT4431 Varies Varies 5,400 cps 24 hrs. 89D Gray 19 8,800 psi

PT4935 Varies Varies 11,000-25,000 24 hrs. 91D Gray 17.7 8,000

Formula 20-136 100:15.5 pbw 3 hrs. 12,000 cps 6 hrs. Barcol 55 Beige 20.51 4500 psi

Metalset A30 100:8 (varies) 90-250 min. 12,000-46,000 24 hrs. Barcol 65-90 Gray 17.9 4,000 psi

Epoxy resins are harder and offer higher physical

properties and better heat resistance. Epoxies can be

cast or laminated and are used for a variety of

applications including making composite parts, tooling,

vacuum forming molds, holding fixtures as well as

encapsulating electronics.


RIGID FOAMS MIX RATIO POT LIFE VISCOSITY TACK-FREE DEMOLD COLOR CU .IN/ LB. EXPANSION

Foam-iT! 3 1:1 pbv 1 min. 200 cps 6.5 min. 2 hrs. Tan 530-630 18 x

Foam-iT 5 1:1 pbv 1.5 min. 300 cps 5 min. 2 hrs. Tan 300-350 10 x

Flame Out 7 1:1 pbv 1 min. 500 cps 5 min. 1 hr. Tan 247 7 x



FLEXIBLE FOAMS

FlexFoam-iT! III 1:2 pbv 35 sec. 1,000 cps 25 min. 2 hrs. White 400-450 18 x

FlexFoam-iT V 1:1 pbv 1min. 1,000 cps 90 min. 2 hrs. White 275-300 10 x

FlexFoam-iT X 1:1 pbv 1min. 1,000 cps 60 min. 2 hrs. White 150-200 6 x

Flexible & Rigid Urethane Foam OverviewFlexible & Rigid Urethane Foam OverviewUrethane foams are mixed 1A:1B by volume, can be poured into a mold or over any surface and cure quickly.

The density of the foam will determine how much it expands; the lower the number, the more it will expand.

Rigid foams can be used to make lightweight castings, create special effects or provide lightweight

reinforcement to resins and other materials. Flexible foams are available in different hardnesses (pillow-like

to stiff) and are used for cushioning, casting, creating special effects and many other applications. Foams can

be pigmented for a variety of color effects.

EZ Spray Junior EZ Spray Junior is a versatile and convenient spray system for spraying rubbers, plasticsor foam. It is inexpensive and simple to use; if you have a compressor, you can spray any ofthese materials:

SSpraying Rubberpraying Rubber, Plastic & Foam, Plastic & Foam

1. Spray urethane or silicone rubber to make

incredibly detailed production molds that can be

used to cast concrete, plaster, wax, resins, etc.

Silicone cures in 1 hour - minimal surface prep!

2. Spray urethane plastic over rubber molds to

make fast support shells. Plastic can also be sprayed

into molds to make fast, lightweight castings.

Spray StyroCoat™ Styrofoam Coating to coat large areas of

styrofoam quickly with a plastic that is flame and impact resist-

ant. Can then be sanded, primed and painted. Great for creat-

ing themed environments, theater/movie special effects, etc.

EZ~Spray Rigid Foam - Make lightweight, flame

resistant castings, create special effects. Can also

be used for making fast spray support shells or

lightweight reinforcement.

No-cost CD-ROM

will show you how

it works!

7REYNOLDS ADVANCED MATERIALS • www.moldmakingmaterials.com


REYNOLDS ADVANCED MATERIALS • www.moldmakingmaterials.com8

• Alja-Safe™ available in 3-lb. boxes and 20-lb. pails

• Body Double™ available in trial sizes, cartridges, gallon units and 5-gallon units

Here are the latest technologies in “apply-to-the-skin” mold making materials. Both are “skin safe” and

reproduce incredible detail. Alja-Safe™ is the world’s first alginate that does not contain free crystalline silica (a known

carcinogen). Mixed 1part water to 1 part Alja-Safe™ by volume, working time can be varied by altering water tempera-

ture. Molds can be used to cast plaster, Matrix NEO, Dragon Skin silicone rubber or Smooth-Cast 300Q fast plastic to

make a reproduction. Alja-Safe is economical, but molds are good for one casting only.

Body Double™ silicone rubber is easy to use (1A:1B by volume) and can be brushed directly onto the skin to make fast

molds of faces, hands and any body part. Molds are durable and will last to make many reproductions. You can cast

just about anything into Body Double including resins, wax, plaster, concrete, etc. Two speeds of Body Double are

available and “Starter Kits” come complete with everything you need to start making molds from life now.

Life CastingLife Casting

MATERIALS MIX RATIO POT LIFE VISCOSITY DUROMETER DEMOLD COLOR CU .IN/ LB.

Alja-Safe Alginate 1:1 pbv (Water) 8 min. Thick Liquid N/A 10 min. Pink 26

Body Double Standard Set 1:1 pbv 5 min. Brushable 25A 30 min. Purple 23.7

Body Double Fast Set 1:1 pbv 90 seconds Brushable 25A 5 min. Green 23.7

Plaster Bandage Material Water Soak 2 min. N/A N/A 15 min. White N/A

Polymer ModifiersPolymer ModifiersPlaster With An Attitude! - duoMatrix-G™ is a

polymer additive system for alpha gypsums that

greatly enhances physical and performance proper-

ties. Castings are stronger, lighter, weather resistant

and can be demolded four times faster. It's versa-

tility allows adding of metal powders and other

fillers to simulate the look of metal, stone and other

facades. Matrix-G™ can also be pigmented and

painted.

duoMatrix™ NEO™: No Scale? No problem! . . .

and UL Flame Rated! A new, easy-to-use version of Matrix™-G,

NEO's dry components (PART A) are “pre-measured” for easy

measuring and mixing with PART B – latex liquid. Easy two-to-one

by volume mix ratio means no scale is required. NEO™ can be

used to make lightweight pieces that are very strong and

water-resistant. NEO™ is also flame resistant (has passed

UL-94 Flame Test and is Flame Rated).

duoMatrix™-C: Concrete With An Attitude!

duoMatrix-C is a new polymer additive for

concrete that greatly enhances physical and

performance characteristics. Matrix-C™

greatly reduces water/salt absorption and

virtually eliminates microcracks. Freeze/thaw,

chemical and UV resistance are also

enhanced, and Matrix-C™ also eliminates the

usual 7-day post cure.

REYNOLDS ADVANCED MATERIALS • www.moldmakingmaterials.com 9

Reynolds Advanced Materials conducts mold making & casting seminars on a regular basis at each

location. Call for the schedule or visit www.moldmakingmaterials.com.

Instructional Books, Videos & Seminars

We also offer how-to videos,

CD-ROMs, booklets and other

instructional literature to help you

visualize and learn the mold making

and casting process.

Call your nearest location or order online

at www.moldmakingmaterials.com.

ChavantChavant™™ Model ClaysModel Clays

Mold Release Mold Release AgentAgentssPoly

UrethaneEpoxy Polyester

Poly

Foam

Silicone

Rubber

Shiny

Surface

Satin

Surface

Flat

Surface

Universal

Mold

Release � � � �ER 200 � � � � �ER 800 � �ER 1700 � �ER 2831 � �

NSP (Non Sulphur Plasteline) - contains no sulphur filler that causes cure inhibition

with various liquid rubber mold making materials. The NSP line consists of clays that contain

higher percentage of wax components making the clays somewhat “tuffer.” Available in Soft,

Medium or Hard, these clays have good adhesive qualities, flexibility and length. Because they

are “tuffer,” NSP tend to accept cut detail lines very cleanly, with no ragged edges.

Le Beau Touché and Le Beau Touché-HM are two distinctive products with some very similar characteristics. Both are

sulphur-free clays that have exceptional smoothness and adhesive qualities. Both hold very good detail and carve and

shape easily. They have tremendous flexibility and will not dry or crack. The original Le Beau Touché is very sensitive to

heat, while the HM remains stable at higher temperatures.

Y2-Klay is an industrial design clay that is lightweight and sulphur-free. It is excellent for milling (clay fragments do not

stick to milling bits) and is resistant to shrinking and cracking.

AAvesves® Apoxie SculptApoxie Sculpt

Apoxie Sculpt is a self-hardening

synthetic clay that combines the

features and benefits of clay with

those of epoxies.

Apoxie Sculpt is self-hardening with a

3-hour working time and 24-hour cure.

It has 0% shrinkage and strongly

adheres to most clean surfaces. Fully

machineable Apoxie Sculpt is non-

toxic and available in 10 colors plus

two metals.

VVictory Brown Wictory Brown Waxax

This wax is less crystalline than

paraffin wax, although it is a micro-

crystalline petroleum-based wax.

Victory Brown remains flexible at low

temperatures and may be used as an

adhesive, in investment castings, and

blended in for candle making.

Easily molded by hand, Victory

Brown may also be used as a

sculpture wax.

Klean KlayKlean Klay®

Kleen Klay is a

non-drying, non-

hardening, non-

sulphur modeling

clay for a variety

of applications. It remains pliable at

room temperature and is non-toxic,

sanitary and odorless. Kleen Klay

is easy to handle and work with--

keeps its smooth, firm consistency

while retaining the shape into which

it is molded.


GypGypsum sum

10

Gypsum

Product

Use Consistency

(Parts of Water by

Weight Per

100 Parts Plaster)

1 Hour

Compressive

Strength

Dry

Compressive

Strength

Maximum

Setting

Expansion

Density

Wet

Density

Dry

Set

Time

No. 1

Casting Plaster65 1,200 psi 2,400 psi 0.210% 100.0 lb/ft³ 72.5 lb/ft³ 27-37 min.

Gardencast 12.5 2,500 psi 8,000 psi 0.10% 131.0 lb/ft³ 110.5 lb/ft³ 25-35 min.

Hydrocal White 45 1,000 psi 5,000 psi 0.390% 110.0 lb/ft³ 9.0 lb/ft³ 25-35 min.

Hydrostone 32 4,000 psi 10,000 psi 0.240% 119.0 lb/ft³ 106.0 lb/ft³ 17-20 min.

Tuf Cal 32 4,000 psi 10,000 psi 0.240% 122.0 lb/ft³ 112.0 lb/ft³ 25-30 min.

No. 1

Pottery Plaster70 1,000 psi 2,400 psi 0.210% 99.0 lb/ft³ 69.0 lb/ft³ 14-24 min.

Drystone 18-20 cc 8,000 16,000 psi 0.275% 130.0 lb/ft³ 128.0 lb/ft³ 5-10 min.

Hydrocal

FGR 9530-36 cc N/A N/A N/A N/A N/A N/A

UltraCal 30 32 4,000 psi 10,000 psi 0.240% 119.0 lb/ft³ 106.0 lb/ft³ 17-20 min.

ULTRACAL® 30 Gypsum Cement

Super-strength gypsum cement recommended where extreme accuracy and greater surface hardness are required, as in duplicator models. Harder

and stronger than HYDROCAL® A-11 and HYDROCAL® B-11 cements, ULTRACAL® 30 cement has the lowest expansion of any rapid-setting gyp-

sum cement available. Has a gradual set and long period of plasticity. Ideal for splash-casting molds and models for phenolic, polyester and epoxy

resins. It was designed to give the pattern making industry the ultimate in a gypsum cement-tooling medium.

HYDROCAL® FGR-95 Gypsum Cement

Hydrocal® FGR-95 Gypsum Cement is a specially formulated gypsum cement which sets fast, develops high strength, and permits fabrication of

strong, resilient glass-reinforced products. The superior fire retardant properties of Hydrocal® FGR-95 Gypsum Cement allow for safe, code-compliant

installation in all types of public and private structures.

GARDENCAST™ Gypsum Cement

Specially Designed for free-standing, solid cast outdoor statuary. Produces strong, hard casts that set rapidly and can be demolded in one hour after

set, resulting in increased productivity versus conventional cements. Also produces a uniform white color.

USG No. 1 Casting Plaster

The industry standard for figurines, plaques, and lamp bases. Special additives maintain smooth-working qualities and upon drying, result in a hard

working surface with reduced paint absorption and degree of chip-resistance.

HYDRO-STONE® Gypsum Cement

HYDRO-STONE is recommended for producing high-quality novelty and statuary castings requiring extremely hard surfaces. This product is

self-leveling when poured and not suitable for hollow cast applications. HYDRO-STONE must be mechanically mixed for best results.

HYDROCAL® White Gypsum Cement

A good general use product that offers a gradual setting time and a long period of plasticity. Recommended for solid and hollow casting of lamp bases

and figurines. Designed for thin sections which require high green strength to minimize breakage during removal from an intricate mold.

TUF-CAL™ Plaster

A special plaster blended with polymer and synthetic fibers. Ideal for larger items where a high strength-to-weight ratio is required. It provides better

chip resistance and impact strength in cast items than either White Art Plaster, No. 1 Casting Plaster, or HYDROCAL White Gypsum Cement.

Available in 20 and 30 minute set times.

USG® No. 1 Pottery Plaster

Highly uniform, USG No. 1 Pottery Plaster is noted for outstanding performance and long life. The standard of the industry, it is the best material

available for sanitary-ware and dinnerware slip casting.

DRYSTONE™ Casting Media

This unique product eliminates the need for expensive drying and provides an environmentally sound alternative to resin-based products.

Mixing Containers

REYNOLDS ADVANCED MATERIALS • www.moldmakingmaterials.com 11

Mold Making & Casting Mold Making & Casting AccessoriesAccessories

Smooth-On has been manufacturing adhesives since 1895. They continue to be the choice of all

branches of the U.S. Military, every major airline and auto manufacturer in the world, and many

other major industrial manufacturing and repair operations.

ADHESIVE MIX RATIO POT LIFE VISCOSITY FULL CURE COLOR TENSILE ELONGATION COMPR. STR.

Super Instant 1:1 pbv 2.5 min. 1,100 cps 10 min. Clear Amber 1,100 psi 10+% 4,500 psi

Metalset A4 1:1 pbv 22 min. Paste-Like 16 hrs. Metal Gray 3,600 psi 1.2% 7,500 psi

MT-13 1:1 pbv 35 min. Light-Paste 16 hrs. White 4,300 psi 0.8% 8,700 psi

EA-40 1:1 pbv 2 hrs. Light-Paste 24 hrs. Clear Amber 3,400 psi 1% 8,100 psi

PC-3 (Lab tops) 1:1 pbv 20 min. Paste-Like 24 hrs. Black 3,000 psi N/A 5,000 psi

FLEXIBLE

Ure-Bond II (urethanes) 1:1 pbv 5 min. 5,400 cps 20 min. Amber 800 psi 121% N/A

Sil-Poxy (silicones) No Mixing 5 min. Paste-Like 12 min. Translucent 750 psi 750% N/A

Smooth-On Epoxy Smooth-On Epoxy Adhesive OverviewAdhesive Overview

Polypropylene Mixers. PolyPro Squirrel

Mixers have a solid core galvanized steel shaft

and a durable, easy to clean polypropylene

cage. These are the perfect mixers for any proj-

ect. If your PolyPro Squirrel Mixer finds its way

to the bottom of your toolbox and becomes a bit

out of shape, just place it in boiling water for a

few minutes. Then it is as good as new!

• 1 Gallon/Quart PolyPro

• 5 Gallon PolyPro

• Skinny (Bunghole)

Steel Mixers. ProSteel Squirrel Mixers have a

solid core steel shaft and galvanized mixing

cage. Industrial Squirrel Mixers have a solid core

stainless steel shaft and stainless steel mixing

cage. They are kind to containers and do not

have any spot welds or solder joints, which can

come loose or separate. Unmatched mixing per-

formance for larger jobs is guaranteed when

using ProSteel and Industrial Squirrel Mixers.

• ProSteel 5 (5-10 gallons)

• Industrial 55 (10-55+ gallon)

• Industrial BIG (55-100+ gallon)

Powder-Free Gloves

Metal PowdersColor

Tints

Dry Gas Blanket

Concrete & Plaster

Colorants

REYNOLDS ADVANCED MATERIALS

www.moldmakingmaterials.com

Dallas • North Hollywood • Orlando

Mold Making & Casting Mold Making & Casting AssessoriesAssessories

AACCESSORIES DESCRIPTION AUNITS

So-Strong™ Color TintsColorants for urethane rubbers, plastics & foams.

Red, Blue, Green, Yellow, Orange, Purple, Black,

Brown, White

2-OZ., PINTS, GALLONS

Silc Pig™ PigmentsColorants for silicone rubbers. Blue, Black, Red,

Green, Yellow, Fleshtone, White4-OZ.

Metal PowdersBronze, Brass, Copper and Nickel-Silver. Add to

urethane resins for cold cast metal effects1, 5, 10, 25 and 50-lb. sizes

Ure-Fil™ 3, 5 & 7 FillersFillers for urethane plastics that act as extenders

and provide different effects.3 to 500-lb. sizes

Cast Magic™ SystemPowders and glitters for urethane resins to create

hundreds of looks and effects0.5 t0 250-gram sizes

Cab-O-Sil Filler used for thickening mold rubber 0.6 & 10-lb. sizes

Matrix™ Chopped Glass A-R Glass for duoMatrix™ system, gypsums 2, 5 & 44-lb. sizes

Xtend-It™Dry gas blanket removes moisture from urethane

rubber and plastic containers7-oz. aerosol

Kick-It™ Cure Accelerator for urethane rubbers Pint, gallon & 5-gallon sizes

So-Cure™ Cure Accelerator for urethane plastics 4-oz., pints & gallon sizes

SuperSeal™ Sealing Agent for porous materials Pint, gallon & 5-gallon sizes

FastCat™ Catalysts Accelerators for Mold Max Silicone Rubbers 4-oz., Pint, 1/2-gallon, 6-gallon sizes

Thi-Vex™ Thickening agent for some silcone rubbers Pint, gallon & 5-gallon sizes

Silicone Thinner Lowers the viscosity of silicone rubbers Pint, gallon & 5-gallon sizes

Lambo™ ColorsDry powdered pigment for coloring concrete,

stucco, plaster and other cementitious materialsVariety of sizes

Sonite Wax Excellent sealing & releasing wax Quart, gallon & 5-gallon sizes

Ease Release 2831Liquid release agent for releasing polyurethane

foams. Can be brushed on or sprayed on.Pint, gallon & 5-gallon sizes

In & Out IIDilute with water for an economical release agent

for removing concrete from moldsGallon, 5-gallon & 55-gallon sizes

Squirrel MixersMixing attachments for power drills - available in

both polypropylene and steel constructionVariety of sizes

Mix N Measure Containers Plastic containers for measuring & mixing 16-oz. - 1 qt. - 2.5 qt. - 5-qt. sizes

Gloves Industrial grade, powder-free latex gloves. M - L - XL sizes

Reynolds Advance Materials Catalog[1]

Documents

Transcript of Reynolds Advance Materials Catalog[1]