REVSPEC TRUE AK ORRUGATED ERIES · COLORBOND® steel base metal thickness is 0.35, 0.42, or 0.48mm...

1

RR13.1

TRUE OAK CORRUGATED SERIES TRUE OAK CORRUGATED SERIESREVSPEC

MILE END SOUTH SA55 Scotland Road

P: 08 8352 0911 F: 08 8352 0922

REGENCY PARK SA5-17 Taminga Street

P: 08 8352 0911 F: 08 8352 0922

LONSDALE SA14 Bredbo Street

P: 08 8186 0545 F: 08 8186 1341

OSBORNE PARK WA55b Hector Street

P: 08 9217 9011 F: 08 9204 5564

FEATURES OF THE TRUE OAK CORRUGATED SERIES

• Smooth, rounded sinusoidal wave profile which can be seen from afar. • Strikingly different from the shallow v-shaped post 1930’s profile with no flat areas. • Continuous curves create an ever changing shadow and prison bar ‘aesthetics’. • Revives the original classic 1829 profile. • Superior strength & water carrying capacity. • 20 Year Material & Installation Guarantee when installed by a Revolution Roofing Licensed Contractor. • New semi metallic colour ‘Cordite Grey’ unique to Revolution Roofing.• Re-engineered superior profile optimising the use of steel.

For too many years architects, builders and roofers have had limited choices in roofing and material options.

Until now.

In an industry starved of innovation, Revolution Roofing has identified a new opportunity to bring a distinct character back to Australia’s roofscapes.

It’s time to roll out a bolder, character filled and more aesthetically pleasing roofing alternative to stimulate, captivate and invigorate the way the market thinks about steel roofing.

Introducing True Oak – a return to a rounder, fuller, more shapely and deeper profile in corrugated roofing popular before the turn of the century.

True Oak is a unique product range featuring more options, colours and more importantly, choices for anyone who specifies roofing.

Integrating form and function, the character and distinct shadowlines of the True Oak profiles are designed to help stimulate the imaginations of architects, builders, roofers and their customers.

The original deeper, residential grade corrugated profile was a 13/16 inch (21mm) rounded, snub nose design and strikingly different to the current 15.9mm V-shaped corrugated profile. It was a quality product used to create functional buildings and distinctive forms of appealing simplicity.

Now, thanks to Revolution Roofing, it’s back better than ever.

Corrugated iron has been around for over 180 years in Australia. Throughout this time, corro has gone from a choice of many varying profiles to a choice of just one.

Roofing and material choices and options for specifying architects have become increasingly limited in Australia, with only one 3 inch shallow corrugated offering being available since 1939. This unfortunate lack of development in new corrugated roofing over the past 70 years has led to a proliferation of featureless, lackluster roofing profiles.

With the revolutionary True Oak profiles, we have a product that allows roofing to once again become a major part of a residential building’s identity, style and charm.

By marrying the lessons of history with 21st Century technology, Revolution Roofing heralds a new era in roofing with its continuous, deep, fully rounded corrugated profile.

Not since 1829 has there been this much of a change to the Australian Roof Industry and we invite you to be among the first to take advantage of the superbly versatile True Oak series.

PLYMPTON PARK SA 576 Marion Road P: 08 8352 0990

2

TRUE OAK CORRUGATED SERIESREVSPEC

EXCLUSIVE FINISHES ONLY AVAILABLE WHEN USING TRUE OAK


P: 08 8352 0911 F: 08 8352 0922


P: 08 8352 0911 F: 08 8352 0922


P: 08 8186 0545 F: 08 8186 1341


P: 08 9217 9011 F: 08 9204 5564

HISTORIC NEW COLOUR FROM THE PAST Even BlueScope Steel is excited! To coincide with the launch of Revolution Roofings new True Oak corrugated profiles, BlueScope Steel have launched a new semi-metallic colour ‘Cordite Grey’ in the style of the original graphite micaceous paints.

MATTE FINISHTraditional Colorbond Steel is available in many different colours but has only been available in standard gloss or enhanced gloss for verandas. Revolution Roofing partnered with BlueScope Steel to develop the first Colorbond Matt Finish product for the Australian market. What started as adjusting the gloss levels of Colorbond Monument has turned in to one of the most exciting new finishes to hit the Australia market for years.

• Stock Colours:• Stealth™ (Monument)• Smoke™ (Windspray)• Desert Storm™ (Terrain)

Other colours are available on request but may be subject to longer lead times or minimum order quantities.

FENCINGIt has been many years since there has been a new colour in the fencing range so we thought to make up for lost time we would introduce 2. For all the home owners who want their fence to match their roofs we introduced double sided Seedpod (Dune) and Shadow (Monument) in our True Oak 21mm Deep profile. Also available are the good neighbour Colorbond post and rails to match the sheets.

DOUBLE SIDED VERANDA COLOURSOur range of Verandas, Carports and Patios - Victory - come in a range of double-sided COLORBOND® Steel sheets with a high gloss finish to give you a low maintenance, attractive and street-smart structure without the need for painting.

The great selection of COLORBOND® Steel roofing colours also allow for a choice of gloss on the underside of the sheeting to complement your home. There are 8 different options including Classic Cream, Monument, Woodland Grey, Paperbark, Manor Red, Mangrove, Gully and Surfmist.

As a company we will continue to push the boundaries, this often means bringing out new profiles or new finishes for existing products. Over the last 5 years we have listened to the customer demands for more choices and we are proud to offer the following finishes that are exclusive to Revolution Roofing and our exciting True Oak range:


REVSPECTRUE OAK ‘M

ID 10m

m’

3

RR13.1

TRUE OAK CORRUGATED SERIESREVSPEC

TRUE OAK WATERTIGHTGUARANTEE


P: 08 8352 0911 F: 08 8352 0922


P: 08 8352 0911 F: 08 8352 0922


P: 08 8186 0545 F: 08 8186 1341


P: 08 9217 9011 F: 08 9204 5564

GUARANTEED TO LAST Revolution Roofing are so sure that their True Oak Corrugated will stand the test of time they are willing to back it up with an exclusive True Oak 20 Year Watertight Installation Guarantee. With the improved strength of the profile comes the improved warranty to match; the ‘industry standard’ of a 5 Year Watertight Guarantee for corrugated has been surpassed and then some.

Whether it is a school, a nursing home or your family home, you can have the comfort of knowing that the True Oak is the strongest corrugated profile in Australia and if it has been installed by a Revolution Roofing Approved Contractor it will not leak.



ID 10m

m’

4MILE END SOUTH SA

55 Scotland RoadP: 08 8352 0911 F: 08 8352 0922


P: 08 8352 0911 F: 08 8352 0922


P: 08 8186 0545 F: 08 8186 1341


P: 08 9217 9011 F: 08 9204 5564

This page has been intentionally left blank



ID 10m

m’

5

RR13.1


P: 08 8352 0911 F: 08 8352 0922


P: 08 8352 0911 F: 08 8352 0922


P: 08 8186 0545 F: 08 8186 1341


P: 08 9217 9011 F: 08 9204 5564

TRUE OAK ‘MID 10mm’

MATERIAL SPECIFICATIONS

ZINCALUME® steel base metal thickness is 0.42, and 0.48mm with an aluminium/zinc/magnesium alloy coating complying with AS1397 -2011 ( 550MPa minimum Yield Strength, 125g/m2 minimum metallic coating mass)

COLORBOND® steel base metal thickness is 0.35, 0.42, or 0.48mm with an aluminium/zinc/magnesium alloy coating substrate complying to AS1397 -2011 and Paint coating complying to AS/NZS 2728 Type 4 ( 550 MPa minimum Yield Strength, 100g/m2 minimum metallic coating mass)

COLORBOND® Ultra steel base metal thickness is 0.42, or 0.48mm with an aluminium/zinc/magnesium alloy coating substrate complying to AS1397 -2011 and Paint coating complying to AS/NZS 2728 Type 4 ( 550 MPa minimum Yield Strength, 150g/m2 minimum metallic coating mass)

COLORBOND® Matte Finish steel base metal thickness is 0.60mm with an aluminium/zinc/magnesium alloy coating substrate complying to AS1397 -2011 and Paint coating complying to AS/NZS 2728 Type 4 ( 300 MPa minimum Yield Strength, 100g/m2 minimum metallic coating mass)

Heritage Galvanised is a 0.60mm, Z600 hot dipped zinc-coated structural steel complying with AS1397-2001 G300 (300MPa minimum yield stress), 600g/m2 minimum coating mass

Note:1. For walling the data is based on wind pressure.2. When using as a soffit lining fastening the side laps mid

span will improve the overall appearance whilst not affecting the functionality of the product

3. All external fasteners should be fitted with a epdm washers.

Revolution Roofing TRUE OAK ‘MID’Recommended Maximum Support Spacings (mm) SPAN TABLE

Wall Span 0.42 BMT

Single Span 1500

End Span 1100

Internal Span 1500

Overhang 200

Ceiling or Soffit Span 0.42 BMT

Single Span 600

End Span 600

Internal Span 900

SPAN TABLE NON-CYCLONIC

DETAIL ASCALE 4

A

1

1

2

2

3

3

4

4

5

5

6

6

A A

B B

C C

D D

5 - 17 Taminga StreetREGENCY PARKSA 5031Phone - (08) 8352 0911Fax - (08) 8352 0922

835.25

797.93

8.89 TO CREST

9.56 TO TROUGH

37.96

R10.27 R12.85

R11.80 R11.66

.680 FROM CREST TO RADIUS CHANGE

5.04 5.18

4.76

4.90

9.95

.090 FROM TROUGH TO RADIUS CHANGE

49.6°63.2°

53.8° 54.1°

TRUE OAK 102:5



ID 10m

m’

6



P: 08 8352 0911 F: 08 8352 0922


P: 08 8352 0911 F: 08 8352 0922


P: 08 8186 0545 F: 08 8186 1341


P: 08 9217 9011 F: 08 9204 5564

TRUE OAK ‘MID’ MASSES

Colorbond

0.35 BMT 0.42 BMT 0.48 BMT 0.60 BMT

kg/lm 2.75 3.25 3.69 4.51

kg/m2 3.44 4.06 4.61 5.64

Zincalume

0.35 BMT 0.42 BMT 0.48 BMT 0.60 BMT

kg/lm 2.71 3.23 3.68 4.49

kg/m2 3.39 4.04 4.60 5.61

Heritage Galvanised

0.35 BMT 0.42 BMT 0.48 BMT 0.60 BMT

kg/lm - - - 4.98

kg/m2 - - - 6.23

Tolerances: Length: +7mm/ -7mm, Width: +4mm/ -4mm

True Oak Mid 10mm is available in 0.48 BMT Perforated which is ideal for ceilings and wall linings, stock colours are Colorbond Surf Mist and Zincalume.

Perforated Metal:• 11% open area• 2.38mm Diameter Hole• 6.74 Degree pitch

Non-Cyclonic 0.42 BMTNON-CYCLONIC Wind Uplift Resistance - Service and Strength Limit State Design

Span

(mm

) End Span

Span

(mm

) Internal Span

Serviceability (kPa)

Strength (kPa)


Strength (kPa)

900 0.47 5.18 1200 0.46 4.87

1200 0.43 3.56 1500 0.43 3.58

1500 0.41 2.67 1800 0.41 2.79

1800 0.38 2.10 2100 0.39 2.12

Required Fixings: Screws: H.W.F head self drilling metal M4.8 - 16x25 Ripple Zips length + Seal (Buildex Screws) 7 Screws per sheet - Internal supports 7 Screws per sheet - End Supports Base Metal: Minimum steel purlin thickness, 1.5mm



ID 10m

m’

7

RR13.1



P: 08 8352 0911 F: 08 8352 0922


P: 08 8352 0911 F: 08 8352 0922


P: 08 8186 0545 F: 08 8186 1341


P: 08 9217 9011 F: 08 9204 5564

Suggested TRUE OAK ‘MID’ - Non Cyclonic Pierce Fixing

Type Fixing To Steel(Up to 1.9mm) Fixing To Timber

Valle

y Fixe

d(W

all O

nly)

Buildex Ripplezip M4.8-16 x 25 or 10-16 x 16mm Hex

Head

Buildex Ripplezip M4.8-16 x 25 or 10-12 x 25mm Hex

Head T17

RECOMMENDED FASTENERS

8 fasteners per sheet - end supports and end laps

Valley Fastener Location

Note: Side lap fasteners are optional.

FASTENER SPACING NON-CYCLONIC

Maximum Support Spacings

The maximum recommended support spacings are based on testing in accordance with AS1562.1-1992, AS4040.1-1992 and AS4040.2-1992. The wall spans take in to consideration the resistance to wind pressure only.

Lengths: Sheets are manufactured to your required length but for handling requirements a maximum length of 6.0m is rec-ommended for ceilings and soffits; an 8.0m maximum sheet length is recommended when used as a wall cladding

Note: After exposure of cladding to an extreme wind event, it is recommended that inspection be performed to confirm cladding integrity.* The above data displayed is based on trend data, which is a true representation of the average product capability.

Valley fixed fasteners for True Oak ‘MID’ ceiling and walling applications are Buildex Ripple Zips M4.8-16x25 which can be used for both steel and timber supports. Refer to Buildex Product Guide for ‘user’ instructions or visit www.buildex.com.au

FASTENERS



ID 10m

m’

8MILE END SOUTH SA

55 Scotland RoadP: 08 8352 0911 F: 08 8352 0922


P: 08 8352 0911 F: 08 8352 0922


P: 08 8186 0545 F: 08 8186 1341


P: 08 9217 9011 F: 08 9204 5564



REVSPECTRUE OAK ‘DEEP 21m

m’

9

RR13.1

TRUE OAK ‘DEEP 21mm’


P: 08 8352 0911 F: 08 8352 0922


P: 08 8352 0911 F: 08 8352 0922


P: 08 8186 0545 F: 08 8186 1341


P: 08 9217 9011 F: 08 9204 5564


ZINCALUME® steel base metal thickness is 0.40, and 0.48mm with an aluminium/zinc/magnesium alloy coating complying with AS1397 -2011 ( 550MPa minimum Yield Strength, 125g/m2 minimum metallic coating mass)

COLORBOND® steel base metal thickness is 0.35, 0.40, or 0.48mm with an aluminium/zinc/magnesium alloy coating substrate complying to AS1397 -2011 and Paint coating complying to AS/NZS 2728 Type 4 ( 550 MPa minimum Yield Strength, 100g/m2 minimum metallic coating mass)

COLORBOND® Ultra steel base metal thickness is 0.40, or 0.48mm with an aluminium/zinc/magnesium alloy coating substrate complying to AS1397 -2011 and Paint coating complying to AS/NZS 2728 Type 4 ( 550 MPa minimum Yield Strength, 150g/m2 minimum metallic coating mass)

COLORBOND® Matte Finish base metal thickness is 0.40mm with an aluminium/zinc/magnesium alloy coating substrate complying to AS1397 -2011 and Paint coating complying to AS/NZS 2728 Type 4 ( 550 MPa minimum Yield Strength, 100g/m2 minimum metallic coating mass)

Heritage Galvanised is a 0.40, or 0.48mm, Z600 hot dipped zinc-coated structural steel complying with AS1397-2001 G300 (550MPa minimum yield stress), 600g/m2 minimum coating mass

1

1

2

2

3

3

4

4

5

5

6

6

7

7

8

8

A A

B B

C C

D D

E E

F F

APPROVED BY:REV LETTER REV DESCRIPTION APPROVED DATE

SHEET 1 OF 1

TITLE:

SCALE AT A3 DRAWING NUMBER READ WITH

CADSYS: INVENTOR 16

PATH: \\FILESERVER\Engineering\CAD Documents\Inventor\Roof Profiles\Drawings\True Oak 21.idw

NAME SIGNED DATEDESIGNEDDRAWNCHECKEDAPPROVEDIMAGE No:REF. FILE No:

FILE No:CAD FILE No:

MATERIAL:FINISH: QTY: OFFTOLERANCES M/M

0

0.0

0.00

ANGLES

ALL DIMENSIONS IN MM UNLESS STATED

COPYRIGHTTHIS DRAWING IS THE PROPERTY OF

REVOLUTION ROOFING PTY LTDIT IS A CONFIDENTIAL DOCUMENT AND MUST NOTBE COPIED, REPRODUCED, USED OR ITS CONTENTS

DIVULGED WITHOUT PRIOR WRITTEN CONSENT

5 - 17 Taminga StreetREGENCY PARKSA 5031Phone - (08) 8352 0911Fax - (08) 8352 0922 2 : 5

True Oak 21

835.54

762.00

20.8

0

76.20

TRUE OAK 21

Revolution Roofing TRUE OAK ‘DEEP’ 21mmRecommended Maximum Support Spacings (mm) SPAN TABLE

Roof Span 0.35 BMT

0.40 BMT

0.48 BMT

0.60 BMTTrafficable

0.60 BMTControlled

Single Span 750 900 1500 1100 1500

End Span 900 1200 1700 1400 1900

Internal Span 1200 1400 2000 1800 2600

Unstiffened Overhang 200 250 300 300 300

Stiffened Overhang 350 400 450 N/A N/A

Wall Span 0.35 BMT

0.40 BMT

0.48 BMT 0.48 BMT

Single Span 1050 1850 2100 2100

End Span 1050 1850 1900 1900

Internal Span 1300 2100 2400 2400

Unstiffened Overhang 180 185 190 190


Roof spans were based upon AS 4040.1 - Methods of testing sheet roof and wall cladding- Introduction, list of methods and general requirements. Point load tests were in accordance with AS 1562 - Design and installation of sheet roof and wall cladding.

MINIMUM ROOF PITCH 3 DEGREES To avoid capillary action Revolution Roofing recommend using the True Oak Turn Down tool on any roof pitch below 10 degrees.



ID 21mm’

10



P: 08 8352 0911 F: 08 8352 0922


P: 08 8352 0911 F: 08 8352 0922


P: 08 8186 0545 F: 08 8186 1341


P: 08 9217 9011 F: 08 9204 5564

STANDARD INTERPRETATION OF SPANS

Internal Span

End Span

End Span

O

O

Internal Span

End Span

End Span

O

O

O = Overhang

Single Span

End Bay

Internal Bay

Design Parameters

Internal End

KL 1.0 KL 2.0

∑C = -0.85 ∑C = -1.50

Pu = - 1.82 kPa

Ps = - 0.74 kPa

Region A:Terrain Category 2Height = 10mVz = 45m/secQ*u,s = 0.83 kPaCpe = +0.7/-0.65Cpi = -0.2/+0.2

Non-Cyclonic 0.35 BMTNON-CYCLONIC Wind Uplift Resistance –Service and Strength Limit State Design

Span

(mm

) End Span

Span

(mm

)

Internal Span


Strength (kPa) Serviceability

(kPa)Strength

(kPa)

900 0.82 5.65 1200 0.80 5.24

1200 0.68 3.87 1500 0.69 3.93

1500 0.57 2.89 1800 0.60 3.10

1800 0.47 2.27 2100 0.52 2.54


Span

(mm

) End Span

Span

(mm

)

Internal Span



(kPa)Strength

(kPa)

900 2.15 6.46 1200 1.98 6.11

1200 1.51 4.92 1500 1.51 4.95

1500 1.14 3.72 1800 1.21 3.99

1800* 1.02 3.21 2100* 1.01 3.19


Span

(mm

) End Span

Span

(mm

)

Internal Span



(kPa)Strength

(kPa)

900 1.28 6.39 1200 1.23 6.08

1200 1.03 4.43 1500 1.05 4.62

1500 0.84 3.15 1800 0.90 3.51

1800* 0.68 2.26 2100* 0.77 2.60

TOLERANCE & MASSES

Colorbond

0.35 BMT 0.40 BMT 0.48 BMT 0.60 BMT

kg/lm 2.88 3.27 3.89 4.76

kg/m2 3.78 4.29 5.10 6.25

Zincalume

0.35 BMT 0.40 BMT 0.48 BMT 0.60 BMT

kg/lm 2.86 3.25 3.86 4.74

kg/m2 3.75 4.27 5.07 6.22

Heritage Galvanised

0.35 BMT 0.40 BMT 0.48 BMT 0.60 BMT

kg/lm - 3.78 4.39 5.32

kg/m2 - 4.96 5.76 6.98


Span

(m

m) Single Span


Strength (kPa)

1200 2.77 10.93

1500 1.44 9.30

1800 0.84 7.96

2100* 0.54 6.84 * Span exceeds trafficable point loads.



ID 21mm’


11

RR13.1



P: 08 8352 0911 F: 08 8352 0922


P: 08 8352 0911 F: 08 8352 0922


P: 08 8186 0545 F: 08 8186 1341


P: 08 9217 9011 F: 08 9204 5564

Note: Side lap fasteners are optional when using 5 fasteners per sheet, but are a requirement when only using 3 fasteners per sheet for valleys.

3 fasteners per sheet - internal supports(roofing should be lapped away from prevailing weather)

Crest Fastener Location



Note: After exposure of cladding to an extreme wind event, it is recommended that inspection be performed to confirm cladding integrity.

* The above data displayed is based on trend data, which is a true representation of the average product capability.

Maximum Support Spacings

The maximum recommended support spacings are based on testing in accordance with AS1562.1-1992, AS4040.1-1992 and AS4040.2-1992. The recommended roof spans take in to consideration both resistance to wind pressure and light roof traffic (traffic arising from maintenance). The wall spans take in to consideration the resistance to wind pressure only.

Suggested TRUE OAK ‘DEEP’ Non Cyclonic Pierce Fixing

TypeFixing To Steel(Up to 1.9mm)

Fixing To Steel(2.0mm - 3.5mm) Fixing To Timber

Cres

t Fixe

d

M6.2-13 x 50mm Hex Head HiGrip

w/- Seal

Self Drilling 12-14 x 35mm Hex Head HiGrip w/- Seal

M6.2 -13x50mm or65mm T17 Timber

Valle

y Fixe

d(W

all O

nly) M6.2 -13x25mm or

10-16 x 16mm Metal Teks Hexagon Head

with Seal-

M6.2 -13x25mm or 10-12 x

25mm T17

Crest Fixing: 5 Fasteners Per Sheet Single Span Crest Fixing: 3 Fasteners Per Sheet End and Internal Spans


REVSPEC


TRUE OAK ‘MID 21m

m’

12



P: 08 8352 0911 F: 08 8352 0922


P: 08 8352 0911 F: 08 8352 0922


P: 08 8186 0545 F: 08 8186 1341


P: 08 9217 9011 F: 08 9204 5564

Note:1. Analysis based upon steady state of flow and Manning

formula with n=0.222.2. Analysis based upon depth of flow 9.5mm (sheet overlap

consider to be 2mm above the line of flow) .3. Analysis doesn’t consider thermal limitations on

maximum length, refer to Revolution Roofing for details.4. The above tables do not consider gutter and downpipe

requirements.

MAXIMUM ROOF LENGTHS FOR DRAINAGE

55 50

45 40

35 30 25

1 2 3 4 5

Max

imum

She

et L

engt

h

Roof Slope (degrees)

100mm/hr150mm/hr 200mm/hr 250mm/hr300mm/hr350mm/hr400mm/hr

***Revolution Roofing recommends a minimum pitch of 3 degrees when using True Oak Superior ‘DEEP.’

Note: Arbitrary length limit, refer Revolution Roofing for specific extensions.

TRUE OAK SUPERIOR ‘DEEP’ Rainfall Capacity Maximum Roof Length for Drainage

Roof Slope (degrees)

Rainfall Capacity (mm/hr)

100 150 200 250 300 350 400

1 24 16 12 9 8 6 6

2 34 22 17 13 11 9 8

3 41 27 20 16 13 11 10

4 48 32 24 19 16 13 12

5 54* 36 27 21 18 15 13

RAINFALL CAPACITY & DRAINAGE CHARTS


REVSPECTRUE OAK ‘SUPER 5’

13

RR13.1

TRUE OAK ‘SUPER 5’REVSPEC


P: 08 8352 0911 F: 08 8352 0922


P: 08 8352 0911 F: 08 8352 0922


P: 08 8186 0545 F: 08 8186 1341


P: 08 9217 9011 F: 08 9204 5564

MATERIAL SPECIFICATIONSZINCALUME® steel base metal thickness is 0.48mm with an aluminium/zinc/magnesium alloy coating complying with AS1397 -2011 ( 550MPa minimum Yield Strength, 125g/m2 minimum metallic coating mass)

COLORBOND® steel base metal thickness is 0.48mm with an aluminium/zinc/magnesium alloy coating substrate complying to AS1397 -2011 and Paint coating complying to AS/NZS 2728 Type 4 (550 MPa minimum Yield Strength, 100g/m2 minimum metallic coating mass)

COLORBOND® Ultra steel base metal thickness is 0.48mm with an aluminium/zinc/magnesium alloy coating substrate complying to AS1397 -2011 and Paint coating complying to AS/NZS 2728 Type 4 ( 550 MPa minimum Yield Strength, 150g/m2 minimum metallic coating mass)

COLORBOND® Matte Finish base metal thickness is 0.48mm with an aluminium/zinc/magnesium alloy coating substrate complying to AS1397 -2011 and Paint coating complying to AS/NZS 2728 Type 4 ( 550 MPa minimum Yield Strength, 100g/m2 minimum metallic coating mass)

Heritage Galvanised is 0.48mm, Z600 hot dipped zinc-coated structural steel complying with AS1397-2001 G300 (550MPa minimum yield stress), 600g/m2 minimum coating mass

Trafficable Roof Span: Assumed that foot traffic is distributed over a minimum of two ribs at any one time.

Note:1. For roofing the data is based on foot traffic loading.2. For walling the data is based on wind pressure.3. The above data table is based on supports of 1mm BMT.

Revolution Roofing TRUE OAK ‘SUPER 5’Recommended Maximum Support Spacings (mm) SPAN TABLE

Roof Span 0.48 BMT

0.60BMT

Single Span 1200 1200

End Span 1800 1800

Internal Span 2400 2400

Wall Span 0.48 BMT

Single Span 2200

End Span 2200

Internal Span 2200


1

1

2

2

3

3

4

4

5

5

6

6

7

7

8

8

A A

B B

C C

D D

E E

F F

APPROVED BY:REV LETTER REV DESCRIPTION APPROVED DATE

SHEET 1 OF 1

TITLE:

SCALE AT A3 DRAWING NUMBER READ WITH

CADSYS: INVENTOR 16

PATH: \\FILESERVER\Engineering\CAD Documents\Inventor\Roof Profiles\Drawings\Super 5.idw

NAME SIGNED DATEDESIGNEDDRAWNCHECKEDAPPROVEDIMAGE No:REF. FILE No:

FILE No:CAD FILE No:

MATERIAL:FINISH: QTY: OFFTOLERANCES M/M

0

0.0

0.00

ANGLES

ALL DIMENSIONS IN MM UNLESS STATED

COPYRIGHTTHIS DRAWING IS THE PROPERTY OF

REVOLUTION ROOFING PTY LTDIT IS A CONFIDENTIAL DOCUMENT AND MUST NOTBE COPIED, REPRODUCED, USED OR ITS CONTENTS

DIVULGED WITHOUT PRIOR WRITTEN CONSENT

5 - 17 Taminga StreetREGENCY PARKSA 5031Phone - (08) 8352 0911Fax - (08) 8352 0922 2 : 5

Super 5

844.00

735.00

122.50 35.0

0

TRUE OAK 5

MINIMUM ROOF PITCH 2 DEGREES To avoid capillary action Revolution Roofing recommend using the True Oak Turn Down tool on any roof pitch below 10 degrees.

Note: The True Oak Super 5” in 0.60 BMT Curving Quality G300 has an effec-tive coverage of 720mm.



14

TRUE OAK ‘ SUPER 5’


P: 08 8352 0911 F: 08 8352 0922


P: 08 8352 0911 F: 08 8352 0922


P: 08 8186 0545 F: 08 8186 1341


P: 08 9217 9011 F: 08 9204 5564

Design Parameters

STANDARD INTERPRETATION OF SPANS

Internal End

KL 1.0 KL 2.0

∑C = -0.85 ∑C = -1.50

Pu = 1.82 kPa

Ps = 0.74 kPa

Region A:Terrain Category 2Height = 10mVz = 45m/secQ*u,s = 0.83 kPaCpe = +0.7 / -0.65Cpi = -0.20 / +0.2

Note: Table limits for walls based on pressures stated in above table.

Non-Cyclonic 0.48 BMTNON-CYCLONIC wind uplift Resistance - Service and Strength Limited

State Design

Span

(mm

)

End Span

Span

(mm

)

Internal Span


Strength (kPa)


Strength (kPa)

1200 2.04 6.08 1200 2.06 6.16

1500 1.66 4.60 1500 1.74 4.88

1800 1.35 3.66 1800 1.47 4.02

2100 1.08 3.02 2100 1.24 3.39

2400 0.86 2.56 2400 1.04 2.92

TOLERANCES & MASSES

Colorbond

0.48 BMT 0.60 BMT

kg/lm 3.89 4.76

kg/m2 5.29 6.61

Zincalume

0.48 BMT 0.60 BMT

kg/lm 3.86 4.74

kg/m2 5.25 6.58

Heritage Galvanised

0.48 BMT 0.60 BMT

kg/lm 4.39 5.32

kg/m2 5.97 7.39

Internal Span

End Span

End Span

O

O

Internal Span

End Span

End Span

O

O

O = Overhang

Single Span

End Bay

Internal Bay




15

RR13.1

TRUE OAK ‘SUPER 5’


P: 08 8352 0911 F: 08 8352 0922


P: 08 8352 0911 F: 08 8352 0922


P: 08 8186 0545 F: 08 8186 1341


P: 08 9217 9011 F: 08 9204 5564

Suggested TRUE OAK ‘SUPER 5’ - Non Cyclonic Pierce Fixing

Type Fixing To Steel(Up to 1.9mm)

Fixing To Steel(2.0mm - 3.5mm)

Fixing To Timber

Cres

t Fixe

d

M6.2-13 x 50mm Hex Head HiGrip w/- Seal

Self Drilling 14-14 x 68mm Hex Head HiGrip w/- Seal

M6.2 -13x65mm or 65mm T17

Timber

Valle

y Fixe

d(W

all O

nly) M6.2 -13x25mm or

10-16 x 16mm Metal Teks Hexagon Head

with Seal

M6.2 -13x25mm or 10-12 x 25mm T17

RECOMMENDED FASTENERS

Note: Side lap fasteners are optional when using 6 fasteners per sheet.



Crest Fastener Location - Roofing


Crest: 6 Fasteners Per Sheet - End Supports and End Laps

Crest: 3 Fasteners for Internal Supports

FASTENER SPACING CYCLONIC


Crest Fastener Location




Strength Limit State Design Pressure

Span(mm)

End Span (Test)Stregth (kPa)

Span(mm)

Internal Span (Test)Strength (kPa)

950 5.72 1200 5.72

NCC 2014 (also known as the Building Code of Australia)• Volume 1: Specification B1.2 - Class 2 to 9 buildings• Volume 2: Part 3.10.1 - Class 1 and 10 buildings.

AS 1562.1 - 1992 - Design and installation of sheet roof and wall cladding (Amdt 3-2012)

AS 4040 - 1992 - Methods of testing sheet roof and wall cladding • Part 0: Introduction, list of methods and general

requirements• Method 3: Methods of testing sheet roof and wall

cladding - Resistance to wind pressures for cyclone regions, pressure test regime as per BCA Lo-Hi-Lo.

Note: It is recommended that a qualified structural engineer check the suitability of the Limit State Design Wind Pressures for the intended site of use. It is our opinion that a qualified structural engineer may extrapolate for shorter spans and higher pressures provided that the screw force is not exceeded.After exposure of cladding to an extreme wind event, it is recommended that inspection be performed to confirm fixing and cladding integrity.

Windborne Debris Impact Testing Roof Application - Vertical Trajectories

Target Velocity - Vertical Trajectories

Timber Member: 8.8m/sSpherical steel ball: 26.4 m/s

Equivalent Regional Wind Speed (V500 )

Vr=88m/s (Region D)

Tested SheetingType: True Oak ‘Super 5’Base metal thickness: 0.48bmtMaterial grade: G550

Tested Spans Triple Equal Span: 1200mm

AS/NZS 1170.2 :2011Structural Design Actions, Part 2: Wind actions, Section 2.5 Wind actions, Part 2.5.8 Impact loading from windborne debris - Vertical Trajectories (Roofing)

CTS Technical Note No.4 Simulated Windborne Debris Impact Testing of Building Envelope Components (Version 3)



16MILE END SOUTH SA

55 Scotland RoadP: 08 8352 0911 F: 08 8352 0922


P: 08 8352 0911 F: 08 8352 0922


P: 08 8186 0545 F: 08 8186 1341


P: 08 9217 9011 F: 08 9204 5564




ID 10m

m’

17

RR13.1

TRUE OAK CORRUGATED CURVING TRUE OAK CORRUGATED CURVINGREVSPEC


P: 08 8352 0911 F: 08 8352 0922


P: 08 8352 0911 F: 08 8352 0922


P: 08 8186 0545 F: 08 8186 1341


P: 08 9217 9011 F: 08 9204 5564

For details regarding Smooth Curving of the True Oak Profiles please see Roofing and Cladding section.

BULLNOSE CONVEXCONCAVE

S CURVE RIDGE CURVETRADITIONAL 8 FLUTE

FULL CIRCLE‘DEEP 21mm’

FULL CIRCLE‘MID 10mm’

Maximum Radius

Deep 21: 350mmSuper 5”: N/AMid 10: N/A

Minimum Dip

Deep 21: 75mmSuper 5”: 100 mm

Mid 10: 75 mm

Maximum Radius

Deep 21: 1000mmSuper 5”: 2500mmMid 10: 1000mm


REVSPECTRUE OAK CORRUGATED CURVING

18

TRUE OAK CORRUGATED CURVING


P: 08 8352 0911 F: 08 8352 0922


P: 08 8352 0911 F: 08 8352 0922


P: 08 8186 0545 F: 08 8186 1341


P: 08 9217 9011 F: 08 9204 5564

The measurements above will be required for Revolution Roofing to work out the sheet length required. Where the sheet is going in to the gutter 50mm will be added to the overall sheet length.


ZINCALUME® steel base metal thickness is 0.60mm with an aluminium/zinc/magnesium alloy coating complying with AS1397 (300MPa minimum yield strength, 125g/m2 minimum metallic coating mass).

COLORBOND® steel base metal thickness is 0.60mm with an aluminium/zinc/magnesium alloy coating substrate complying to AS1397 and Paint coating complying to AS/NZS 2728 Type 4 ( 300 MPa minimum Yield Strength, 100g/m2 minimum metallic coating mass).

COLORBOND® Ultra steel base metal thickness is 0.60mm with an aluminium/zinc/magnesium alloy coating substrate complying to AS1397 and Paint coating complying to AS/NZS 2728 Type 4 ( 300 MPa minimum Yield Strength, 150g/m2 minimum metallic coating mass).

Heritage Galvanised is a 0.60mm, Z600 hot dipped zinc-coated structural steel complying with AS1397-2001 G300 (300MPa minimum yield stress), 600g/m2 minimum coating mass.

A

B

C

500mm

D

5°

RADI

US

BULL NOSE

B

A

CONVEX

D

H XCONCAVE

A

B

D

C

RIDGE CURVE



ID 10m

m’

19

RR13.1

TRUE OAK CORRUGATED CURVINGREVSPEC


P: 08 8352 0911 F: 08 8352 0922


P: 08 8352 0911 F: 08 8352 0922


P: 08 8186 0545 F: 08 8186 1341


P: 08 9217 9011 F: 08 9204 5564


REVSPEC TRUE AK ORRUGATED ERIES · COLORBOND® steel base metal thickness is 0.35, 0.42, or 0.48mm...

Documents

Transcript of REVSPEC TRUE AK ORRUGATED ERIES · COLORBOND® steel base metal thickness is 0.35, 0.42, or 0.48mm...