Review For Final (Week 16, Monday 12/6/2004) Should consider Review-For-Exam4 for your Final Exam...
-
date post
22-Dec-2015 -
Category
Documents
-
view
220 -
download
5
Transcript of Review For Final (Week 16, Monday 12/6/2004) Should consider Review-For-Exam4 for your Final Exam...
Review For Final
(Week 16, Monday 12/6/2004)
Should consider Review-For-Exam4 for your Final Exam preparation
3OSI Reference Model
7 layers
Each layer communicate with its peer layer, and with layer above and below it.
Different protocols at each layer
Upper layer deal with application issues, and are implemented in software
Lower layers handle data transport issues, and are implemented in software and hardware
App
lica
tion
Dat
a tr
ansp
ort
4Summary Questions
1. (a) Name the OSI layers that deal with application issues ? (b) Name the OSI layer that deal with data transport issue ?
Answer: See previous slide
2) Application programs used at the application layer of the OSI Model include word processing. T / F
3) Upper layers of the OSI Model are usually implemented in physical devices. T / F
6Summary Questions
3. The local area network shown in Figure 8-21 (p. 273) has two hubs (X and Y) interconnecting the workstations and servers. What workstations and servers will receive a copy of a packet if the following workstations/servers transmit a message:
Workstation 1 sends a message to workstation 3:
Workstation 2 sends a message to Server 1:
Server 1 sends a message to workstation 3:
4. Replace hub Y with a switch. Now what workstations and servers will receive a copy of a packet if the following workstations/servers transmit a message:
Workstation 1 sends a message to workstation 3:
Workstation 2 sends a message to Server 1:
Server 1 sends a message to workstation 3:
8Summary Questions
1. Distinguish between digital and analog signals
Answer: (see class notes for details): Analog: Continuous waveform, State of signal (voltage
level, etc.) varies continuously among an infinite number of states
Digital: Non-continuous waveform, State of signal remain constant during each clock-cycle, Few possible states
2. Distinguish between digital and binary transmission
Answer: Digital: Few possible states
Binary: 2 states
9Attenuation
A signal starts at a transmitter with 10 watts of power and arrived at a receiver with 5 watts of power. Calculate the loss of power in dB.
1. dB = 10 log10 (P2 / P1)
2. dB = 10 log10 (5/10)
3. dB = 10 log10 (0.5)
4. dB = 10 (-0.3)
5. dB = -3
Q: What is the decibel loss of a signal that starts at 50 watts and experiences a 10-watt loss over a given section of cable ?
Q: What is the decibel loss of a signal that loses half its power during the course of transmission ?
10Frequency, Bandwidth(See Fundamentals of Data & Signals – Continued for details)
Q: What is the frequency (in Hz) of a signal that repeats 80000 times within one minute ?
Answer: 80000 / 60 = 1333.33 Hz or 1.33 Mhz
Q: What is the bandwidth of a signal composed of frequencies from 50 Hz to 500 Hz ?
Answer: |500 Hz – 50 Hz | = 450 Hz
Q: What is the bandwidth of a signal composed of frequencies from -50 Hz to 500 Hz ?
Answer: |500 Hz – (-50) Hz | = 550 Hz
12Summary Questions
What does cross talk interference mean ? How can crosstalk interference be reduced ?
If transmission wires are placed side by side, electromagnetical radiation is emitted by one wire and picked up by the other. Twisting pair of wire reduce crosstalk interference.
What categories of twisted pair are usually used in LANs ?
Categories 3, 4, 5, 6, 7, 8
What are the advantages and disadvantages of STP compared to UTP ?
Advantage: better level of isolation from noise. Disadvantage: cost
What is the main difference between baseband coaxial cable and broadband coaxial cable ?
Baseband carries digital signals, whereas broadband carries analog signals.
What are the advantages of Optical fiber compared twisted pair and coaxial cable ?
Speed, No significant noise, No significant interference, Long distance
Can you transmit video signal over twisted pair wire ? Explain
You can, but noise is going to be a serious factor.
14
Summary Questions
What are the four factors to take into account in deciding how many servers to use to implement a LAN’s services?
Answer: Optimization, reliability, security, cost
To what two devices does a print server connect?
Answer: To a printer via a parallel cable and to a hub or switch via UTP
Where does a print job go when it leaves the client PC (not counting the hub or switch)?
Answer: The print job first goes to a file server, which puts it in a print queue.
Do you have to use special printers for print service?
Answer: You do not need special printers, because the printer is fed by a parallel cable in the normal way.
15
Summary Questions
Can anyone access shared files?
Answer: No. Only those who have access rights.
Why does file sharing for programs make software installation easier?
Answer: A program only has to be installed once, on the file server, not on each client PC.
Why is storing program files on a file server limiting?
Answer: Programs stored on file servers execute on client PCs, which have limited processing power.
16Servers
Single server Versus Multiple specialized Servers– Decision based on Cost, Optimization, Reliability, and Security
Optimization: – File servers need storage capacity and rapid access– Client/Server applications need very fast processors
17Servers
Print Server: basically NIC + a parallel port + Random Access Memory + Intelligence to receive data and commands from print queue manager program.
Note: Possible to connect printer directly to file server, but people might have to walk far to get their printout.
Newer printers have built-in NICs
& print server hardware
18Servers
File Server: A server that acts like a very large hard disk shared by many client PCs
Advantages: Single program installation, Sharing programs and files with access rights.
Operates according to the File
Server Program Access System
seen during Classes 2&3
19File Server Program Access
For execution,– Program and data files are downloaded (copied) to the
Client PC– Processing on the client PC, not on the file server– File server merely stores programs and data files
File ServerClient PC
Downloaded toClient PC,Executed There
20Summary Questions
Your organization has 12 employees, each with his or her own stand-alone PC running Windows 98. a) List all the additional hardware and software you would have to buy to install a simple PC network. Be very sure that you list all the things the organization will have to buy. The organization wishes to use electronic mail, word processing, file sharing, and print sharing with four existing printers. b) How many ports on the hub or switch will your organization use? Explain.
c) Suppose that a decision have been made to implement the 100BaseTX Ethernet standard. What does it mean in terms of the characteristics of the following components: Hub/Switch, NICs, Wiring.
Answers in Review section of course website (Check the Week9 Summary Questions’ link)
21Software and Support Systems
- [Individual] Operating System- Utilities
- Network Operating System- Application programs:
- Word processor- Spreadsheets- Accountability
- Utilities
• [Individual] or standard Operating System on Client PCs• Network Operating System on Servers
22Ethernet standards
Q: If a LAN is described as 10BaseT, list everything you know about that network?
23Summary Questions
1. (a) What is LAN management ? (b) Name some common management activities.
2. a) What are access rights? b) How does the use of groups simplify the assignment of access rights? c) How does automatic inheritance simplify the assignment of access rights? d) How does explicit assignment modify automatic inheritance?
Answers in Review section of course website (Check the LAN Management link)
24Summary Questions
3. Directory Applications has Subdirectories Databases and WordProcessings. The Network administrator assigns user Lee to the group Outer. The administrator assigns Outer the access rights R, S, and T in Directory Applications. (Don’t worry about the meaning of R, S, and T. They are simply types of rights.) The administrator assigns Outer the access rights S, U, and V in Subdirectory Databases. a) What access rights does user Lee have in Directory Applications? Explain. b) What access rights does user Lee have in Directory Databases? Explain. c) What access rights does user Lee have in Directory WordProcessings? Explain.
Applications
WordProcessingsDatabases
Answers in Review section of course website (Check the LAN Management link)
25Automatic Inheritance of Access Rights
Assigning rights to users or group in a directory Rights automatically inherited in lower directories Simplifies rights assignment
Application
Word Processing Database
Oracle QuickDB
Assigned BrowseAnd Read Rights
Inherits BrowseAnd Read Rights
Inherits BrowseAnd Read Rights
26Automatic Inheritance of Access Rights
Blocking of Inheritance– If rights explicitly assigned in subdirectory, inheritance is blocked– Only assigned rights are effective
Application
Word Processing Database
(Browse and Execute Only)QuickDB
Assigned BrowseAnd Read Rights
Inherit BrowseAnd Read Rights
Assigned BrowseAnd Execute Rights Oracle
28
Summary Questions
How does the subnet differ from the network?
Answer: The network include: the subnet(s), the stations, the OS & other application software, and the other networking devices & transmission medium needed to connect the stations to the subnet
What is the difference between a station and a node?
Answer: A station is the device that interfaces a user to the network. A node is a transfer point for passing data through the network. A node can be a computer, a router, or a telephone switch.
What are the main characteristics of Circuit Switched networks?
Answer: In Circuit Switched networks: (1) a dedicated circuit is established between sender and receiver, (2) circuit capacity is reserved during the duration of each communication, at each node (switch) and on each transmission line; (3) no routing decisions are necessary since circuit is dedicated.
29
Summary Questions
What are the main characteristics of Virtual Circuit Packet Switching?
Answer: (1) Data sent in packets, (2) all packets follow the same virtual circuit, (3) the virtual circuit may be shared with packets from other conversions, (4) no routing decisions except the first one that creates the circuit.
Name some criteria that routing decisions are based on
Answer: see slide #17 in appropriate class notes Name two routing algorithms/techniques.
Answer: see slide #18 in appropriate class notes
31
Summary Questions1. When a standard telephone line is used to connect to a network: (a)
What device limits the speed? (b) Where is this device located?
(a) The analog-to-digital converter (ADC).
(b) It is located at the telephone company’s switch at the end of your local loop access line.
2. (a) In using a V.90 modem, what does the ISP need? (b) What does the telephone company need?
(a) A digital leased line to the telephone carrier (and some internal equipment).
Note: The ISP does not have a V.90 modem. If it did, it could only transmit at 33.6 kbps, and the receiver could only receive at 33.6 kbps.
(b) The telephone company does not have to do anything differently.
Note: the telephone company does not have to install ADCs. These are already there. You use ADCs and DACs every time you make a voice telephone call.
32
Summary Questions
3. (a) How are 56K Leased lines and standard telephone lines different in terms of operation? (b) How are they different in terms of speed and cost?
(a) With Standard telephone lines you need to dial a telephone number to connect. The connection is not permanent (active only during a call). With 56K Leased line, there is no need to dial a telephone number, and the connection is always active.
(b) 56K Leased lines are faster and more expensive.