Reversible Flow Fan - Farnell element14 · reversible flow fan has been designed to deliver air...
5
SANYO DENKI EUROPE SA. is pleased to introduce its new San Ace 136 9RF type DC fan, measuring 136mm diameter by 28mm thick. This reversible flow fan has been designed to deliver air flow in the two opposite directions, contributing to reduce equipment costs and to save space. Features 2 Same cooling performance in both directions approximately same air flow and static pressure in both directions 1 Reduces the required number of fans wind direction of the fan can be switched so fewer • fans are required reduces equipment costs and saves space • NEW PRODUCT INFORMATION Reversible Flow Fan Air Flow / Static Pressure Curves PWM Duty Cycle / Speed Main Specifications 9RF serie Size ................................. 1 size : 136mm diameter by 28mm thick Air flow ........................... 2m 3 /min - 70.7CFM Static pressure .............. forward: 102Pa - reverse: 104Pa Rated voltage ................. 12 or 24VDC depending on models Expected life time .......... 40,000 hours at 60°C Speed control ................. PWM (25kHz) Standard sensor ............. pulse sensor; without sensor & lock sensor (in option) Target Applications House mechanical ventilation Air conditioner Cold drink vending machines Food display cases Printing machines Paper converting machines How to read Model Number* 9RF 13 Frame size 13 diam. 136mm 12 P H 3 01 Voltage 12 12V 24 24V PWM control Sensor 01 pulse sensor Speed code H Frame thickness 3 28mm Series name / frame material 9RF plastic 0 Frame type ribbed plastic frame (*) contact us for available model numbers 3 PWM Speed Control Function to manage power consumption and noise Air flow [m 3 /min] Static pressure [Pa] 20 40 60 80 100 120 0 0.5 1 1.5 2 2.3 Forward Reverse 4,000 3,000 2,000 1,000 1,000 2,000 3,000 4,000 0 100 0 Speed [min -1 ] PWM duty cycle [%] Forward Reverse 3,100 min -1 3,100 min -1 Voltage 12VDC / 24VDC PWM frequency: 25kHz
Transcript of Reversible Flow Fan - Farnell element14 · reversible flow fan has been designed to deliver air...
SANYO DENKI EUROPE SA. is pleased to introduce its new San Ace 136 9RF type DC fan, measuring 136mm diameter by 28mm thick. This reversible flow fan has been designed to deliver air flow in the two opposite directions, contributing to reduce equipment costs and to save space.
Features
2 Same cooling performance in both directionsapproximately same air flow and static pressure in both directions
1 Reduces the required number of fanswind direction of the fan can be switched so fewer • fans are requiredreduces equipment costs and saves space•
http://www.sanyodenki.eu P.A. PARIS NORD II 48 Allée des Erables-VILLEPINTE BP. 57286 F-95958 ROISSY CDG CEDEX France Phone : + 33 1 48 63 26 61
NPI0097_RevA_e
NEW PRODUCT INFORMATION
Reversible Flow Fan
Air Flow / Static Pressure Curves PWM Duty Cycle / Speed
For further information on reversible flow DC fans, please contact us at +33 1 48 63 26 61 or email us at [email protected].
Main Specifications 9RF serie Size ................................. 1 size : 136mm diameter by 28mm thick Air flow ........................... 2m3/min - 70.7CFM Static pressure .............. forward: 102Pa - reverse: 104Pa Rated voltage ................. 12 or 24VDC depending on models Expected life time .......... 40,000 hours at 60°C Speed control ................. PWM (25kHz) Standard sensor ............. pulse sensor; without sensor & lock sensor
(in option)
Target Applications House mechanical ventilation Air conditioner Cold drink vending machines Food display cases Printing machines Paper converting machines
How to read Model Number*
9RF 13
Frame size
13 diam. 136mm
12 P H3 01
Voltage
12 12V24 24V
PWM control
Sensor
01 pulse sensor
Speed code
H
Frame thickness
3 28mm
Series name / frame material
9RF plastic
0Frame type
ribbed plastic frame
(*) contact us for available model numbers3 PWM Speed Control Functionto manage power consumption and noise
Air flow [m3/min]
Sta
tic p
ress
ure
[Pa]
20
40
60
80
100
120
00.5 1 1.5 2 2.3
ForwardReverse
4,000
3,000
2,000
1,000
1,000
2,000
3,000
4,000
0
1000
Spe
ed [m
in-1]
PWM duty cycle [%]
Forward
Reverse
3,100 min-1
3,100 min-1Voltage 12VDC / 24VDCPWM frequency: 25kHz
CATALOG No. C1054B001 ‘15.8
3-33-1, Minami-Otsuka, Toshima-ku, Tokyo, 170-8451, Japan TEL: +81 3 5927 1020 http://www.sanyodenki.com
The names of companies and/or their products specified in this catalog are the trade names, and/or trademarks and/or registered trademarks of such respective companies.“San Ace” is a trademark of SANYO DENKI CO.,LTD.Specifications are subject to change without notice.
Reversible Flow Fan
Note: PWM frequency: 25 kHz
φ136×28mm
■ Specifications
The following nos. have PWM controls and pulse sensors.
－20 to ＋70 40,000 / 60℃
3,100
3,100
3,100
3,100
100
0
100
0
Forward
Reverse
Forward
Reverse
0.15
0.15
0.09
0.09
1.8
1.8
2.2
2.2
9RF1312P3H001
9RF1324P3H001
2.00
2.00
2.00
2.00
70.7
70.7
70.7
70.7
102
104
102
104
0.410
0.418
0.410
0.418
35
46
35
46
12
24
10.2 to 13.8
20.4 to 27.6
Model no. Rated voltage[V]
Operating voltage range
[V]
Rated current[A]
Rated input[W]
Max. airflow[m3/min] [CFM]
Max. static pressure[Pa] [inchH2O]
SPL[dB(A)]
Operating temperature
[℃]
Expectedlife[h]
PWMduty cycle
(Note) [%]
Rated speed[min-1]
Without SensorAvailable options:
Rotationdirection
Lock sensorPlease inquire as the availability of these options depends on the model. ⇒
■ Common Specifications □Material ･･････････････････････････□Expected life ･････････････････････
□Motor protection system ･･････････□Dielectric strength ････････････････□Sound pressure level (SPL) ････････□Operating temperature ････････････□Storage temperature ･･････････････□Lead wire ････････････････････････□Mass ･････････････････････････････
Frame, Impeller: Plastics (Flammability: UL94V-0)
Refer to specifications
(L10: Survival rate: 90% at 60℃, rated voltage, and continuously run in a free air state)
Current blocking function and reverse polarity protection
50 / 60 Hz, 500 VAC, 1 minute (between lead conductor and frame)
Expressed as the value at 1 m from air inlet side
Refer to specifications (Non-condensing)
－30℃ to ＋70℃ (Non-condensing)
＋Red ○ーBlack Sensor: Yellow Control: Brown
Approx. 220 g
Reduces the required number of fans・Multiple fans are usually needed to blow air in both directions to
ventilate houses, and to cool drink vending machines, food display cases, and printers.
・Wind direction of the fan can be switched so fewer fans are required.
・Reduces equipment costs and saves space.・Rotational speed is controlled using an external PWM signal to
deliver an appropriate rotational speed, reducing noise and saving energy.
Same cooling performance in both directions・Has approximately the same airflow and static pressure in both
blowing directions, so it is easy to control performance.
■ Features
■ Dimensions (unit: mm)
Lead wireAWG26UL1007
Rotating direction (Forward)
Rotating direction (Reverse)
Airflow direction(Forward)
Airflow direction(Reverse)
Mounting Hole
Notice●Please read the "Safety Precautions" on our website before using the product.●The products shown in this catalog are subject to Japanese Export Control Law. Diversion contrary to the law of exporting country is prohibited.●To protect against electrolytic corrosion that may occur in locations with strong electromagnetic noise, we provide fans that are unaffected by electrolytic corrosion.
4-φ3.5±0.3
+30
300 0
(10)
28±0.5
(3) (3)
φ136±0.5
131.
5±0.
5
128±0.312
8±0.3
■ Reference Dimension of Mounting Holes and Vent Opening (unit: mm)
Impeller side, Nameplate side
128±0.312
8±0.3
45°45°
φ1224-φ3.5
T
T1
VIL
VIH
■ PWM Input Signal Example
Input signal waveform
T ×100T1
T1
VIH=4.75 V to 5.25 V VIL=0 V to 0.4 VPWM duty cycle (%) = PWM frequency 25 (kHz) =
Source current (Isource) : 1 mA max. at control voltage 0 VSink current (Isink) : 1 mA max. at control voltage 5.25 VControl terminal voltage: 5.25 V max. (Open circuit)
When the control lead wire is open, the fan speed is the same as the one at a PWM duty cycle of 100%. Either TTL input, open collector or open drain can be used for PWM control input signal.
■ Example of Connection Schematic
Inside of DC fanDC fan input voltage
PWM input signalControl
○＋
○－
Isource
Isink20 ｋΩ
10 ｋΩ
Output circuit: Open collector
T1 to 4≒ (1/4) T0
T1 to 4≒ (1/4) T0＝60/4N (sec)
N＝Fan speed (min-1)T0
(One revolution)
T1
0 V
VOL
VOH
T2 T3 T4
Inside of DC fan
○－
○＋
■ Specifications for Pulse Sensors
In case of steady running
Output waveform (Need pull-up resistor)
IC
(VCE)Sensor output
Sensor Pull-up resistor
Pull-up voltage
Rated voltage 12 V fanVCE＝＋13.8 V max.IC＝5 mA max. [VOL＝VCE (SAT) ＝0.6 V max.]
Rated voltage 24 V fanVCE＝＋27.6 V max.IC＝5 mA max. [VOL＝VCE (SAT) ＝0.6 V max.]
■ PWM Duty - Speed Characteristics Example
Voltage: 12 VDC / 24 VDC PWM frequency: 25 kHz
Sp
eed
PWM duty cycle
3,100 min-1
3,100 min-1
1000
1,000
0
3,000
4,000
2,000
1,000
2,000
3,000
4,000
Forward
Reverse
(min-1)
(%)
■ Airflow - Static Pressure Characteristics
(CFM)
(m3 / min)
→ Airflow
PWM duty cycle 100%(Pa)(inch H2O)
9RF1312P3H0019RF1324P3H001
→ S
tati
c p
ress
ure
→ Airflow
PWM duty cycle 0%
9RF1312P3H0019RF1324P3H001
→ S
tati
c p
ress
ure
Forward Reverse
(CFM)
(m3 / min)
(Pa)(inch H2O)
0.50
20
40
60
1 1.5 2
100
80
120
2.50
0.05
0.10
0.15
0.20
0.25
0.30
0.35
0.40
0.45
100 20 4030 70 806050
0.50
20
40
60
1 1.5 2
100
80
120
2.50
0.05
0.10
0.15
0.20
0.25
0.30
0.35
0.40
0.45
100 20 4030 70 806050
10.2 V / 12 V / 13.8 V20.4 V / 24 V / 27.6 V
10.2 V / 12 V / 13.8 V20.4 V / 24 V / 27.6 V
φ136×28mm
T
T1
VIL
VIH
■ PWM Input Signal Example
Input signal waveform
T ×100T1
T1
VIH=4.75 V to 5.25 V VIL=0 V to 0.4 VPWM duty cycle (%) = PWM frequency 25 (kHz) =
Source current (Isource) : 1 mA max. at control voltage 0 VSink current (Isink) : 1 mA max. at control voltage 5.25 VControl terminal voltage: 5.25 V max. (Open circuit)
When the control lead wire is open, the fan speed is the same as the one at a PWM duty cycle of 100%. Either TTL input, open collector or open drain can be used for PWM control input signal.
■ Example of Connection Schematic
Inside of DC fanDC fan input voltage
PWM input signalControl
○＋
○－
Isource
Isink20 ｋΩ
10 ｋΩ
Output circuit: Open collector
T1 to 4≒ (1/4) T0
T1 to 4≒ (1/4) T0＝60/4N (sec)
N＝Fan speed (min-1)T0
(One revolution)
T1
0 V
VOL
VOH
T2 T3 T4
Inside of DC fan
○－
○＋
■ Specifications for Pulse Sensors
In case of steady running
Output waveform (Need pull-up resistor)
IC
(VCE)Sensor output
Sensor Pull-up resistor
Pull-up voltage
Rated voltage 12 V fanVCE＝＋13.8 V max.IC＝5 mA max. [VOL＝VCE (SAT) ＝0.6 V max.]
Rated voltage 24 V fanVCE＝＋27.6 V max.IC＝5 mA max. [VOL＝VCE (SAT) ＝0.6 V max.]
■ PWM Duty - Speed Characteristics Example
Voltage: 12 VDC / 24 VDC PWM frequency: 25 kHz
Sp
eed
PWM duty cycle
3,100 min-1
3,100 min-1
1000
1,000
0
3,000
4,000
2,000
1,000
2,000
3,000
4,000
Forward
Reverse
(min-1)
(%)
■ Airflow - Static Pressure Characteristics
(CFM)
(m3 / min)
→ Airflow
PWM duty cycle 100%(Pa)(inch H2O)
9RF1312P3H0019RF1324P3H001
→ S
tati
c p
ress
ure
→ Airflow
PWM duty cycle 0%
9RF1312P3H0019RF1324P3H001
→ S
tati
c p
ress
ure
Forward Reverse
(CFM)
(m3 / min)
(Pa)(inch H2O)
0.50
20
40
60
1 1.5 2
100
80
120
2.50
0.05
0.10
0.15
0.20
0.25
0.30
0.35
0.40
0.45
100 20 4030 70 806050
0.50
20
40
60
1 1.5 2
100
80
120
2.50
0.05
0.10
0.15
0.20
0.25
0.30
0.35
0.40
0.45
100 20 4030 70 806050
10.2 V / 12 V / 13.8 V20.4 V / 24 V / 27.6 V
10.2 V / 12 V / 13.8 V20.4 V / 24 V / 27.6 V
φ136×28mm
CATALOG No. C1054B001 ‘15.8
3-33-1, Minami-Otsuka, Toshima-ku, Tokyo, 170-8451, Japan TEL: +81 3 5927 1020 http://www.sanyodenki.com
The names of companies and/or their products specified in this catalog are the trade names, and/or trademarks and/or registered trademarks of such respective companies.“San Ace” is a trademark of SANYO DENKI CO.,LTD.Specifications are subject to change without notice.
Reversible Flow Fan
Note: PWM frequency: 25 kHz
φ136×28mm
■ Specifications
The following nos. have PWM controls and pulse sensors.
－20 to ＋70 40,000 / 60℃
3,100
3,100
3,100
3,100
100
0
100
0
Forward
Reverse
Forward
Reverse
0.15
0.15
0.09
0.09
1.8
1.8
2.2
2.2
9RF1312P3H001
9RF1324P3H001
2.00
2.00
2.00
2.00
70.7
70.7
70.7
70.7
102
104
102
104
0.410
0.418
0.410
0.418
35
46
35
46
12
24
10.2 to 13.8
20.4 to 27.6
Model no. Rated voltage[V]
Operating voltage range
[V]
Rated current[A]
Rated input[W]
Max. airflow[m3/min] [CFM]
Max. static pressure[Pa] [inchH2O]
SPL[dB(A)]
Operating temperature
[℃]
Expectedlife[h]
PWMduty cycle
(Note) [%]
Rated speed[min-1]
Without SensorAvailable options:
Rotationdirection
Lock sensorPlease inquire as the availability of these options depends on the model. ⇒
■ Common Specifications □Material ･･････････････････････････□Expected life ･････････････････････
□Motor protection system ･･････････□Dielectric strength ････････････････□Sound pressure level (SPL) ････････□Operating temperature ････････････□Storage temperature ･･････････････□Lead wire ････････････････････････□Mass ･････････････････････････････
Frame, Impeller: Plastics (Flammability: UL94V-0)
Refer to specifications
(L10: Survival rate: 90% at 60℃, rated voltage, and continuously run in a free air state)
Current blocking function and reverse polarity protection
50 / 60 Hz, 500 VAC, 1 minute (between lead conductor and frame)
Expressed as the value at 1 m from air inlet side
Refer to specifications (Non-condensing)
－30℃ to ＋70℃ (Non-condensing)
＋Red ○ーBlack Sensor: Yellow Control: Brown
Approx. 220 g
Reduces the required number of fans・Multiple fans are usually needed to blow air in both directions to
ventilate houses, and to cool drink vending machines, food display cases, and printers.
・Wind direction of the fan can be switched so fewer fans are required.
・Reduces equipment costs and saves space.・Rotational speed is controlled using an external PWM signal to
deliver an appropriate rotational speed, reducing noise and saving energy.
Same cooling performance in both directions・Has approximately the same airflow and static pressure in both
blowing directions, so it is easy to control performance.
■ Features
■ Dimensions (unit: mm)
Lead wireAWG26UL1007
Rotating direction (Forward)
Rotating direction (Reverse)
Airflow direction(Forward)
Airflow direction(Reverse)
Mounting Hole
Notice●Please read the "Safety Precautions" on our website before using the product.●The products shown in this catalog are subject to Japanese Export Control Law. Diversion contrary to the law of exporting country is prohibited.●To protect against electrolytic corrosion that may occur in locations with strong electromagnetic noise, we provide fans that are unaffected by electrolytic corrosion.
4-φ3.5±0.3
+30
300 0
(10)
28±0.5
(3) (3)
φ136±0.5
131.
5±0.
5
128±0.312
8±0.3
■ Reference Dimension of Mounting Holes and Vent Opening (unit: mm)
Impeller side, Nameplate side
128±0.312
8±0.3
45°45°
φ1224-φ3.5
