RESURFACES PROPERLY PREPARED Apply ADVANCED DeckOver ...

2
1 Prep Uncoated Wood or Concrete* Remove old or peeling coatings with a stain and fnish stripper Clean with wood cleaner such as No. 63 All-In-One Wood Cleaner Rinse and allow wood to dry completely prior to applying coating 2 3 RESURFACES PROPERLY PREPARED WEATHERED WOOD AND CONCRETE ® Smooth Finish Textured or Extra Textured Finish ALWAYS Prepare Surface Before Coating Apply ADVANCED DeckOver Coating* Prefll cracks Apply 1st coat at 75 sq. ft. per gallon Apply 2nd coat at 75 sq. ft. per gallon 4 5 6 * See product label for more details behr.com Have a coating or product question? Visit behr.com or call 1-800-854-0133 Ext. 2 (U.S.). ©2018 Behr Process Corporation • 1801 St. Andrew Place • Santa Ana, CA 92705 U.S.A. C-DECK-OVER Item No. 50003180 REV. 12/18 UxaICEHEy00223kzU Project Checklist 1/2" Nap Roller Cover (for Smooth & Textured DECKOVER) Painter’s Tape Roller Frame & Extension Pole Extra Textured Roller Cover (for Extra Textured fnish) Stir Stick & Paint Tray Protective Equipment (gloves, goggles, etc.) Plastic Watering Can Stiff Bristle Brush Drop Cloth Nylon/Polyester Brush Hose or Pressure Washer Wood or Concrete Cleaners Concrete Surfaces: Paint Stripper to Remove Failing Coating (if necessary) Wood Surfaces: Stripper such as BEHR PREMIUM® Wood Stain & Finish Stripper to Remove Failing Coating (if necessary) Cover Photo Deck (top left) - Dark Walnut PFC-25, Deck (bottom left) - Cape Cod Gray SC-365, Dancing (bottom right) - Redwood SC-330 ADHESION CRACKING RESISTANCE NOW DECK OVER ADVANCED

Transcript of RESURFACES PROPERLY PREPARED Apply ADVANCED DeckOver ...

Page 1: RESURFACES PROPERLY PREPARED Apply ADVANCED DeckOver ...

1

Prep Uncoated Wood or Concrete*

Remove old or peeling coatings with a stain and finish stripper

Clean with wood cleaner such as No. 63 All-In-One Wood Cleaner

Rinse and allow wood to dry completely prior to applying coating

2 3

RESURFACES PROPERLY PREPAREDWEATHERED WOOD AND CONCRETE

®

Smooth FinishTextured or Extra Textured Finish

ALWAYS Prepare Surface Before Coating

Apply ADVANCED DeckOver Coating*

Prefill cracks Apply 1st coat at 75 sq. ft. per gallon Apply 2nd coat at 75 sq. ft. per gallon

4 5 6

*See product label for more details

behr.com

Have a coating or

product question?

Visit behr.com or call

1-800-854-0133 Ext. 2 (U.S.).

©2018 Behr Process Corporation • 1801 St. Andrew Place • Santa Ana, CA 92705 U.S.A. C-DECK-OVER Item No. 50003180

REV. 12/18

U|xaICEHEy00223kzU

Project Checklist1/2" Nap Roller Cover(for Smooth & Textured DECKOVER)

Painter’s Tape

Roller Frame & Extension Pole

Extra Textured Roller Cover(for Extra Textured finish)

Stir Stick & Paint Tray

Protective Equipment (gloves, goggles, etc.)

Plastic Watering Can

Stiff Bristle Brush

Drop Cloth

Nylon/Polyester Brush

Hose or Pressure Washer

Wood or Concrete Cleaners

Concrete Surfaces: Paint Stripper to Remove Failing Coating (if necessary)

Wood Surfaces: Stripper such as BEHR PREMIUM® Wood Stain & Finish Stripper to Remove Failing Coating (if necessary)

Cover Photo Deck (top left) - Dark Walnut PFC-25, Deck (bottom left) - Cape Cod Gray SC-365, Dancing (bottom right) - Redwood SC-330

ADHESION

CRACKING

RESISTANCE

NOW

DECKOVER

ADVANCED

Page 2: RESURFACES PROPERLY PREPARED Apply ADVANCED DeckOver ...

Chestnut SC-110

Adobe Brown SC-148

Woodbridge SC-116

Padre Brown SC-105 ♥

Pyramid PFC-19

Valise SC-123

Wood Chip SC-111 ♥

Chocolate SC-129 ♥

Sable SC-135

Dark Walnut PFC-25 ♥

California Rustic SC-130 ♥

Cappuccino SC-142

Russet SC-117 ♥

Redwood SC-330 ♥

Terra Cotta SC-118

Bordeaux SC-106

Barn Red SC-112 ♥

Tile Red PFC-04

Slate SC-102 ♥

Drift Gray SC-137

Harbor Gray SC-143

Silver Gray PFC-68

Pewter SC-131

Atlantic SC-101

Slate Gray PFC-63 ♥

Stonehedge SC-125

Colony Blue SC-119

Flat Top PFC-65 ♥

Mountain Spruce SC-114

Woodland Green SC-126

Sea Foam SC-132

Sandal SC-121

Ponderosa Green SC-120

Forest SC-108

Boot Hill Grey SC-159

Taupe SC-153

Chatham Fog SC-154

Sagebrush Green SC-138

Cordovan Brown SC-104

Antique Brass SC-115

Castle Gray SC-147

Cedar SC-146

Wrangler Brown SC-109

Coffee SC-103

Red Cedar SC-152

Redwood Naturaltone SC-122

Cedar Naturaltone SC-533

Tugboat SC-141

Light Lead SC-149 Cape Cod Gray SC-365 ♥ Sage SC-151 Rose Beige SC-160Golden Beige SC-158Desert Sand SC-145

• Creates a Smooth,

waterproofing finish

• Conceals splinters & cracks up to 1/4"

• Creates a Textured,

waterproofing finish

• For Extra Textured finish, use Extra Textured Roller Cover

♥ Popular Color

Why Choose ADVANCED DeckOver?

ADVANCED DeckOver® Resurfaces Properly Prepared Weathered Wood and Concrete

SMOOTH TEXTURED EXTRA TEXTURED

(Samples Above Shown in Redwood SC-330)