Resumen vlan configuracion basica
5
CONFIGURACION SWITCH CREACION DE LAS VLAN Press RETURN to get started! Switch>en Switch#conf t Enter configuration commands, one per line. End with CNTL/Z. Switch(config)#vlan 2 Switch(config-vlan)#name mercadeo Switch(config-vlan)#exit Switch(config)#vlan 3 Switch(config-vlan)#name ventas Switch(config-vlan)#exit Switch(config)#vlan 4 Switch(config-vlan)#name contabilidad Switch(config-vlan)#exit Switch(config)#interface range fastethernet 0/2-7 Switch(config-if-range)#switchport access vlan 2 Switch(config-if-range)#exit Switch(config)#interface range fastethernet 0/8-13 Switch(config-if-range)#switchport access vlan 3 Switch(config-if-range)#exit Switch(config)#interface range fastethernet 0/14-15 Switch(config-if-range)#switchport access vlan 4
-
Upload
rodrigo-guerra -
Category
Technology
-
view
1.204 -
download
7
description
Transcript of Resumen vlan configuracion basica
CONFIGURACION SWITCH
CREACION DE LAS VLAN
Press RETURN to get started!
Switch>en
Switch#conf t
Enter configuration commands, one per line. End with CNTL/Z.
Switch(config)#vlan 2
Switch(config-vlan)#name mercadeo
Switch(config-vlan)#exit
Switch(config)#vlan 3
Switch(config-vlan)#name ventas
Switch(config-vlan)#exit
Switch(config)#vlan 4
Switch(config-vlan)#name contabilidad
Switch(config-vlan)#exit
Switch(config)#interface range fastethernet 0/2-7
Switch(config-if-range)#switchport access vlan 2
Switch(config-if-range)#exit
Switch(config)#interface range fastethernet 0/8-13
Switch(config-if-range)#switchport access vlan 3
Switch(config-if-range)#exit
Switch(config)#interface range fastethernet 0/14-15
Switch(config-if-range)#switchport access vlan 4
Switch(config-if-range)#exit
Switch(config)#end
Switch#
%SYS-5-CONFIG_I: Configured from console by console
Switch#wr
Building configuration...
[OK]
Switch#show vlan
Switch#
Switch#
Switch#copy running-config startup-config
Destination filename [startup-config]?
Building configuration...
[OK]
Switch#
CONFIGURACION PUERTO 1 DEL SWITCH PARA ROUTER
conf t
inteface fastethernet 0/1
switchport mode trunk
end
wr
copy running-config startu-config
CONFIGURACION ROUTER
System Configuration Dialog ---
Continue with configuration dialog? [yes/no]: no
Press RETURN to get started!
Router>
Router>conf t
^
% Invalid input detected at '^' marker.
Router>en
Router#conf t
Enter configuration commands, one per line. End with CNTL/Z.
Router(config)#interface fastethernet 0/0.1
Router(config-subif)#encapsulation dot1q 2
Router(config-subif)#ip address 192.168.1.1 255.255.255.0
Router(config-subif)#no shutdown
Router(config-subif)#exit
Router(config)#interface fastethernet 0/0.2
Router(config-subif)#encapsulation dot1q 3
Router(config-subif)#ip address 192.168.2.1 255.255.255.0
Router(config-subif)#exit
Router(config)#interface fastethernet 0/0.3
Router(config-subif)#encapsulation dot1q 4
Router(config-subif)#ip address 192.168.3.1 255.255.255.0
Router(config-subif)#end
Router#wr
Building configuration...
[OK]
Router#copy running-config startup-config
Destination filename [startup-config]?
Building configuration...
[OK]
Router#
Router#
Router#conf t
Enter configuration commands, one per line. End with CNTL/Z.
Router(config)#interface fastethernet 0/0
Router(config-if)#no shutdown
Router(config-if)#end
Router#wr
Building configuration...
[OK]
Router#copy running-config startup-config
Destination filename [startup-config]?
Building configuration...
[OK]
Router#
