Resume_Hydraulic_and_Mechanical
-
Upload
prashant-patil -
Category
Documents
-
view
54 -
download
1
Transcript of Resume_Hydraulic_and_Mechanical
Prashant PatilMechanical and Hydraulic Engineering
Human Resources
Application for Mechanical and Hydraulic Engineer
Dear Sir / Madam
I am having 13-years of Experience in Hydraulic and Mechanical domain. Experience in designing skills in Heavy engineering, Hydraulics, also having good exposure in manufacturing, prototyping and inspection of machine components, involved from design to implementation stage. Involved in various New product development Projects. Worked in Design & Development for Gear Pump Product for Eaton, Pune,India. Worked at onsite, for Caterpillar Client, Wackersdorf, Germany and U.S.A. providing Hydraulic Design support:Piping domain for Hydraulic Excavator Product.
.
.
For Thirteen years, I have Experience in Creo.2,Pro/Engineer, PDM/PLM Tools and well versed with 3D Modeling Techniques,
Large assembly management, Top-Down Design, Surfaces, Sheet metal, Pro/Piping, and Detailing. Expertise in Hydraulic Domain, Worked on Gear Pump Product in Design & Development for a
period of 4-years for Eaton Corporation, Pune & Dynamatic Technologies Limited, Bangalore. Worked with Caterpillar Client, U.S.A., Germany for 7-years supporting Hydraulic Team. i.e. Routing of
Hoses & Tubes using Fluid-lines Software in Pro-E for the Hydraulic Excavator,Mining Trucks.Worked for a period of 3-years in Wackersdorf, Germany and for a period of 3-months in Decatur ,USA. On-Job Training and Work.
Experience of working with leading heavy construction manufactures like Caterpillar, Terex,Yammar Strong in communication and exhibits good leadership skills
.
Currently working as Lead Engineer at AxisCades Engineering Technologies Limited, Chennai. Worked at Client Location-Caterpillar, providing Hydraulic support to Drills Design Team as Individual Contributor.
Worked As Team Leader at Cyient Limited, Bengaluru, India and Germany (Wackersdorf). I worked for Caterpillar client. My principal role was to work as an Individual Contributor also leading the team with other activities of project estimation, allocation, team management, quality and execution. As an Individual Contributor, provided Design support for Customer, worked on Design and Hoses and Tubes for Hydraulic Excavator M/c, worked on Cost reduction projects, worked on Shop-Floor for to check for the Design Feasibility and also as an OnSite Coordinator.
As Senior Designer and Design Engineer at Eaton,Pune,India and Design Engineer at Dynamatic Technologies Limited, Bengaluru, India my role was to work on Design & Development for Gear Pump Product .
SincerelyPrashant PatilAddress:Flat no. 3, 1st FloorSubhiksha Appartment,Canal Road, Thiruvanmiyur,Chennai-600041, IndiaE-mail: [email protected] No. : +91 99020-98682 +91 73959-23306
Page 1 of 7
Prashant Patil
SKILLS SUMMARY
. CAD Packages:
Creo.2, Pro/Engineer wild fire 4.0, Fluid-Lines (Modeling, Detailing, Large assembly management, Pro/Sheet metal, Pro/piping).
AutoCAD-Release 14/2002, Ansys-9.0,E-Matrix-10, Cameleon, Team-Center and Pro/Intralink, Windchill-9.0
CAREER HISTORY
Currently Working for AXISCADES Engineering Technologies Limited,Chennai as Lead Engineer from April-2016. Working for Caterpillar Client.
Worked with Hebei Huayu Special Rubber CO., Limited, China (December-2015 to February-2016)(Sole Owner for Marketing of Hydraulic Products-India)
Worked with Cyient Limited,Team-Leader, Bangalore (From April-2010 to June-2015) Dell-Perot Systems Ltd. Hyderabad (For Catter-Pillar Client),Senior Engineer,(May-2009 to March-2010) Satyam, Hyderabad (For Catter-Pillar Client),Devolper,(January-2008 to May-2009) Quest, Bangalore, Senior Design Engineer,(June-2007 to December-2007) Eaton Industries Private Limited, Pune, India,Senior Designer, (May-2005 to June-2007) Concurrent Engineering Solutions Pvt. Limited, Design Engineer, (Jan-2005 to April-2005) Powermetric Technologies Ltd., Bangalore, Design Engineer, ( November-2003 to December-2004) Nobel Software Systems Pvt. Limited, Bengaluru,G.I.S. Technician( June-2003 till November-2003) National Aerospace Laborateries,Bangalore, Trainee Engineer ( September 2002 to March-2003)
ACHIEVEMENTS
Experienced Team management, Project estimation, Onsite Co-ordination, Quality and Execution. Preparing and Demonstration of Presentations for new clients, to increase the Business requirement. Providing Training to Offshore Team on Product and CAD-Softwares Expertise in Hydraulic Domain, CAD-Softwares (ProE, AutoCad)
PERSONAL ATTRIBUTES
Successful in sustaining long-term customer and client relationships. Proven track record of design for new systems and technologies. Systematic approach and ability to develop sound relationships at all levels. Excellent motivation skills combined with strong analytical skills. Able to progress and sell without having all the details finalised. Big picture thinker. Experienced in meeting techniques and workshop facilitation techniques. Consultative approach to planning. Sharp decision maker. Successful in influencing and negotiating to business outcomes. Team player with good judgement and eye for detail. Able to understand and portray alternative points of view in a team environment.
TRAINING ATTENDED:
Page 2 of 7
Prashant Patil
Completed Training in Six-Sigma, Eaton Industries Pvt. Ltd., Pune, India Completed Training In Hydraulics, CITD, Hyderabad, India Completed Training in Pro-E, PTC, Bengaluru, India Completed Training in Ansys-9.0, Pune, India
Work Experience
Company: Currently working for AxisCades Engineering Technologies Limited, Chennai
From April-2016
Project: Medium Rotary Machines (MD6250)(Caterpillar Client)
Client: Counties in the US
Environment: Creo.2, Pro/Engineer wild fire 4.0, Fluid-Lines management, Pro/Sheet metal,
Pro/piping, Team-center Vis-View Mock up
Environnent: Creo.2, Pro-E WildFire-4 (Pro/Sheet metal), Pro-piping
Project Details:
Concept Design for Routing of Tram-Lines using Proe-Fluid Lines Software with Cost-reduction approach by replacing Tubes with Hoses
Concept Design for Shielding of Tram-Lines using Pro/Sheet metal
Cost Reduction Project: Concept Design for Hammer Lube-Oil Tank replacing Tubes with Hoses
Modelling Hydraulic Hoses and tubes assemblies, Doing analysis of Hoses and Tube Assemblies using
Pro-E Fluidlines Software.
Creating dummy Files (JT-Files) by using Team-Center Vis-View Mock Up Software.
Finalize 3-D Model with customer Approval.
Company: Worked for Caterpillar Client through Satyam, Dell and
Cyient Limited. January 2008 till date June-2015
Project: Hydraulic Excavator, Mining Trucks Prototype
Client: Counties in the US, Germany
Environment: Creo.2, Pro/Engineer wild fire 4.0, Fluid-Lines management, Pro/Sheet metal,
Pro/piping, Team-center Vis-View Mock up
Page 3 of 7
Prashant Patil
Project Details:
Project Title: For Hydraulic Excavator, need to fix the lengths of Hoses on Boom.
Environnent: Creo.2, Pro-E WildFire-4 (Pro/Sheet metal) ,Pro-piping
Synopsis:
For Hydraulic Excavator, Prototype,need Fixing of Hose-lengths for Lines Gp-Stick Cylinder, When Boom is in Top, Down and Bottom Positions and avoid interference with other Groups.
Responsibilities:
Selection of Couplings, Apapters
Modeling Hydraulic Hoses and tubes assemblies, Doing analysis of Hoses and Tube Assemblies using Pro-E Fluidlines Software.
Quality checking of Model and Drawings.
Creating dummy Files (JT-Files) by using Team-Center Vis-View Mock Up Software.
Checking for Feasibility on Shop Floor by moving the Boom in Top, Down and Bottom position in Shop-Floor.
Finalize 3-D Model with customer Approval.
Project Title: Re-Routing for Lines GP Boom, Hydraulic Excavator
Environnent: Creo.2, Pro-E WildFire-4 (Pro/Sheet metal) ,Pro-piping
Synopsis: NPI issue: Interference of Hose assembly with the CAB-Group, When the Boom is in Top, Down and Bottom Position.
Responsibilities: Issue resolved by fixing the location of Clamp at correct position, Running Hose-Shape Analysis and
fixing the Length of Hose Assembly.
Checking for Feasibility, By moving the CAB in top and down position in Shop Floor.
Quality checking of Model and Drawings.
Creating dummy Files (JT-Files) by using Team-Center Vis-View Mock Up Software. Finalize 3-D Model with customer Approval.
Project Title: Cost Reduction Project: Lines GP-CAB Riser (Hydraulic Excavator)
Environnent: Creo.2, Pro-E WildFire-4 (Pro/Sheet metal) ,Pro-piping
Synopsis:
By Changing the location of Valve, Re-routed the Hoses for the Group.
Page 4 of 7
Prashant Patil
Responsibilities:
Selection of valve as per customer requirement.
Discuss and review Shop-floor and design team and manufacturing support.
Selection of Couplings, Adapters, for the hoses connecting the Valve.
Modeling Hydraulic Hoses and tubes assemblies, Doing analysis of Hoses and Tube Assemblies using Pro-E Fluidlines Software.
Checking for Feasibility on Shop Floor. Checking for interference with other assemblies.
Quality checking of Model and Drawings.
Creating dummy Files (JT-Files) by using Team-Center Vis-View Mock Up Software.
Finalize 3-D Model with customer Approval.
10% saving of cost by apadting new concept Design
Project Title: Offshore Projects
Environnent: Creo.2, Pro-E WildFire-4 (Pro/Sheet metal) ,Pro-piping,Team-Center
Synopsis:
Getting work from Onsite Engineer and sending to Offshore team.New product Development projects, Modeling and Detailing Projects. After completion of work, reviewing the work and uploading of Pro-E Files in Team-Center.
Responsibilities:.
Review the work load and adjust the resources as per requirement for Offshore Team Review the quality of the deliverables. Preparation / review of methodologies and guideline documents. Making at proposals and business presentations. Identifying skill gaps and providing trainings to the team.Preparing the development
plans for the associates, where necessary.Responsible for preparing and scheduling project goals and deliverables.
Responsible for preparing and scheduling project goals and deliverables. Uploading the Files to Team-Center.
Project Title: For ease of Serviceability and to avoid long Hoses (Hydraulic Excavator)
Environment: Creo.2, Pro-E WildFire-4 (Pro/Sheet metal) ,Pro-piping
Synopsis:
For ease of Serviceability and to avoid long Hoses,Provided new design for Bracket and location on Boom, Where the Hoses are dividedat the Bracket mounting location.
Responsibilities: Bracket Concept development and conduct design review with client.
Selection of Couplings, Adapters for Hoses passing through the bracket
Page 5 of 7
Prashant Patil
Modeling Hydraulic Hoses and tubes assemblies, Doing analysis of Hoses and Tube Assemblies using Pro-E Fluidlines Software.
Checking for Feasibility of Bracket on Shop Floor.
Quality checking of Model and Drawings.
Creating dummy Files (JT-Files) by using Team-Center Vis-View Mock Up Software.
Finalize 3-D Model with customer Approval.
Company: Worked for Dynamatic Technologies Limited, Bengaluru and
Eaton Industries Pvt. Limited,Pune November 2003 to June-2007
Project: Design and development of Prototype for Gear Pumps.Client: Counties in the US
Environment: Pro/Engineer Wildfire 2.0, Product-Center and AutoCad, E-Matrix-10, CameleonSynopsis:
Analyze the customer requirements for gear pump. Concept design and development of component for Prototype Building. 3D Modeling, Assembly & Drawing Detailing by using Cad tools (Pro-E & AutoCAD). Releasing Drawing to Manufacturing & Checking manufacturing Feasibility. Failure analysis of the design component & Take the appropriate action. Raise the test requests and analyze the test data. Interaction with customer & supplier for any technical issue.
Responsibilities:
Concept development, preparation of design calculations to prove new design
& conduct design review with client.
Involved in Pro-E Modeling, surfacing and detailing drawing of Casting Product. Involved in Design calculations: Displacement calculations, Shaft Calculations, etc. Coordinated with group leader and design engineers in case of overlapping assemblies. Involved in shop floor activities in assembling of pump, machining operations, testing
of pumps. Interacted with analysis, testing and certification groups throughout the design process. Responsible in issuing change notice to facilitate production. Applying GD&T to the drawings & Tolerance stack-up for assembly components. Checking manufacturing feasibility & materials required for the product. Release of BOM for manufacturing department. Supplier visit when required & solving issues. Prototype Testing of Gear pump. Responsible for Preparing & sending Bill of Material, Assembly & Installation
drawings to Customer. Responsible for finalizing the orders of customers as required which include
Single, Double & Triple Gear Pumps. Responsible for Modification in Pump parts such as Shafts, Casings & Cover as
design requirements. Responsible for Preparing & sending Bill of Material, Assembly & Installation
drawings to Customer.
Page 6 of 7
Prashant Patil
Qualification
Education Bachelor of Engineering
Specialization Mechanical Engineering (May-2001)
Personal Details
Full Name: Patil, Prashant Parvatgouda
Contact Number: +91 99020 98682 , +91 73959 23306(Mobile Number)
Email ID: [email protected]
Marital Status: Married
Date of Birth : 7th-February-1977
Visa Type : Buisness Visa(U.S.A.) till October-2018
Blue Card-German Work Permit(Till December-2014)
Page 7 of 7