Resume_Arunkumar_ Sr.QC Welding/Piping Inspector
2
1 | Page OIL&GAS/Petroleum/Refinery Arunkumar M.A. Mallikabhavan, Mathilbhagom, Thiruvalla P.O., Pathanamthitta, Kerala-689101, India. +968 9537 1706 (Presently at Oman) +91 9495 75 7729 (India) : [email protected] CAREER OBJECTIVE A highly motivated young individual of combined experience in various fields of Engineering Construction works such as a Quality Assurance, Quality Control/Inspection, other related Mechanical works both in OIL & GAS / Petrochemical/Refineries at local and overseas. A result oriented person, high performer, flexible excellent inter-personal written and oral communication skills, familiar with the engineering standards and computer literate. Accomplish the assigned job in a professional and organized manner with minimal supervision. Summary of Professional Experience: • Ensure the effective implementation of the quality system procedure. • Provide construction assurance support, performing and coordinating specific QA/QC audit activities to insure that fabrication and construction deliverables comply with project specifications. • Identifying non conformities (NCR) and assuring final solutions. • Preparation of Quality Procedures & ITP. • Conducting workshop inspection at subcontractor places. • Verify material and equipment received is meeting purchase order and specification requirements. • Conduct WQT(welder qualification test) as per Welding Procedure Specification (WPS) • Reviewing of all welding procedures and ensuring that proper WPS is used in the on job parameters. Visual examination of all welds and carrying out proper NDE as per customer approved NDE plan. • Carrying out all stage wise inspection activities in the ongoing job, and ensuring that all the operations being carried out in the site are as per approved standards and codes. • Ensuring that welders are properly qualified and proper consumables are used in the job. • Closely monitoring the welder’s individual performance. Strictly implementing the WPS& PQR’s instructions and maintaining parameters reports. Monitoring and controlling the repair percentage of each welder. • Piping Spool (CS, LTCS, SS, DSS & CRA) Pre-fabrication & Erection Inspection activities-(FU, WV, SD & Coordination’s). • Monitoring & witnessing NDT & PWHT activities. • Review of Line/Weld History Sheet as per approved drawings. • Final quality walks through and attending Quality Review Meeting regularly and exploring the solution for the site oriented problems. • Review of Test package with P&ID and Isometric drawings. • Witnessing Hydro testing & pneumatic testing. • Conduct reinstatement of piping after pressure test; monitor internal cleaning, Preservation and Flange Management. • Preparation & Review of Pre-commissioning Dossiers. • Co-ordination with Third Party Inspection Agency & CA for clearance. • Safety Auditing at site JOB PROFILE QC Welding / Piping Inspector Total Experience: 7years & above Larsen & Toubro Hydrocarbon Engineering Ltd. (Oct 2008 – till the date) On Deputation (Since 2009 Nov). L&T Modular Fabrication Yard LLC, Sohar, Sultanate of Oman. QUALIFICATION Diploma in Mechanical Engineering-2008 year. N.S.S. Polytechnic College, Pandalam VHSE- 2005 year. Republican Vocational Higher Secondary, Konni. CERTIFICATIONS CSWIP 3.1- Level II (Welding Inspector) Cert. No: 90217 NDT- ASNT Level-II (MPT, PT, UT, RT) Supervisory Development Program by Symbiosis Institute of Business Management AutoCAD-2008. CADD Centre Thiruvalla. .
-
Upload
arunkumar-m-a -
Category
Engineering
-
view
223 -
download
8
Transcript of Resume_Arunkumar_ Sr.QC Welding/Piping Inspector
1 | P a g e OIL&GAS/Petroleum/Refinery
Arunkumar M.A. Mallikabhavan, Mathilbhagom, Thiruvalla P.O.,
Pathanamthitta, Kerala-689101, India.
+968 9537 1706 (Presently at Oman)
+91 9495 75 7729 (India)
CAREER OBJECTIVE
A highly motivated young individual of combined experience in various fields of Engineering Construction works such as a Quality Assurance, Quality Control/Inspection, other related Mechanical works both in OIL & GAS / Petrochemical/Refineries at local and overseas. A result oriented person, high performer, flexible excellent inter-personal written and oral communication skills, familiar with the engineering standards and computer literate. Accomplish the assigned job in a professional and organized manner with minimal supervision.
Summary of Professional Experience:
• Ensure the effective implementation of the quality system procedure.
• Provide construction assurance support, performing and coordinating specific QA/QC audit activities to insure that fabrication and construction deliverables comply with project specifications.
• Identifying non conformities (NCR) and assuring final solutions.
• Preparation of Quality Procedures & ITP. • Conducting workshop inspection at subcontractor places. • Verify material and equipment received is meeting purchase
order and specification requirements. • Conduct WQT(welder qualification test) as per Welding
Procedure Specification (WPS) • Reviewing of all welding procedures and ensuring that proper
WPS is used in the on job parameters. Visual examination of all welds and carrying out proper NDE as per customer approved NDE plan.
• Carrying out all stage wise inspection activities in the ongoing job, and ensuring that all the operations being carried out in the site are as per approved standards and codes.
• Ensuring that welders are properly qualified and proper consumables are used in the job.
• Closely monitoring the welder’s individual performance. Strictly implementing the WPS& PQR’s instructions and maintaining parameters reports. Monitoring and controlling the repair percentage of each welder.
• Piping Spool (CS, LTCS, SS, DSS & CRA) Pre-fabrication & Erection Inspection activities-(FU, WV, SD & Coordination’s).
• Monitoring & witnessing NDT & PWHT activities. • Review of Line/Weld History Sheet as per approved drawings. • Final quality walks through and attending Quality Review
Meeting regularly and exploring the solution for the site oriented problems.
• Review of Test package with P&ID and Isometric drawings. • Witnessing Hydro testing & pneumatic testing. • Conduct reinstatement of piping after pressure test; monitor
internal cleaning, Preservation and Flange Management. • Preparation & Review of Pre-commissioning Dossiers. • Co-ordination with Third Party Inspection Agency & CA for
clearance. • Safety Auditing at site
JOB PROFILE
QC Welding / Piping Inspector
Total Experience: 7years & above
Larsen & Toubro Hydrocarbon
Engineering Ltd.
(Oct 2008 – till the date)
On Deputation (Since 2009 Nov).
L&T Modular Fabrication Yard
LLC, Sohar, Sultanate of Oman.
QUALIFICATION
Diploma in Mechanical
Engineering-2008 year.
N.S.S. Polytechnic College,
Pandalam
VHSE- 2005 year.
Republican Vocational
Higher Secondary, Konni.
CERTIFICATIONS
CSWIP 3.1- Level II
(Welding Inspector)
Cert. No: 90217
NDT- ASNT Level-II
(MPT, PT, UT, RT)
Supervisory Development
Program by Symbiosis
Institute of Business
Management
AutoCAD-2008.
CADD Centre Thiruvalla.
.
2 | P a g e OIL&GAS/Petroleum/Refinery
Project Handled (Overseas)
Sr. QC- Inspection Engineer (Welding/Piping)
Project: Upper Zakum750 Islands Surface Facilities- EPC2
Modules/Racks for Petrofac- ZADCO U.A.E. From Nov, 2014 to till
the date
Sr. QC- Inspection Engineer (Welding)
Project: HTHR Boiler package- 10 Sets (HTHR Boiler, Steam drum
& Piping for ALSTOM Power Energy Recovery GmbH, Germany. From July 2014 to Nov. 2014 (on deputation to L&T Heavy
Engineering)
Sr. QC- Inspection Engineer (Welding/Piping)
Project: ADMA OPCO UMM LULU-NASR Field Development
Project Phase-1. June 2013- June2014 (Fabrication of 4 wellhead
towers and one manifold tower and jackets for ADMA OPCO.)
QC- Inspection Engineer (Welding/Piping)
Project: PTTEP Zwatika Field Development Project Phase-1A
April 2012 – May 2013. (Fabrication of 3 wellhead towers and
jackets for PTTEP Thailand).
QC Inspector – (Welding/Piping)
Project: Sagar Uday Jack up Rig Refurbishment
May 2011-March 2012 (Refurbishment of Jack up rig which include
hull steel renewal and complete piping renewal for ONGC India.)
QC Inspector – (Materials)
Project: MHNRD N18 & N20 Offshore Jackets
Dec 2010 – April 2011 (Fabrication of 8 legged offshore jacket of
2500 MT for ONGC India.)
QC Inspector – (Materials)
Project: MHN &LQ Offshore Jackets
Nov 2009 – Dec 2010 (Fabrication of 8 & 4 legged offshore jacket of
16000 MT for ONGC India.)
QC Inspector – (Piping)
Project: Fore sight driller VII Jack up Rig Refurbishment -Nov 2009
– Dec 2010 (Refurbishment of Jack up rig which include hull steel
renewal and complete piping renewal for Lynemouth Drilling Ltd)
Junior Engineer Trainee (India)
Project: Maersk Oil Qatar Block-5 Filed Development Project
Oct 2008 – Oct 2009 (Fabrication of two wellhead towers (HA & IA
and a flare platform & Building Module.)
CURRENT ADDRESS
Larsen & Toubro MFY LLC, PO Box: 236, Falaj Al-Qabail,
PC-322, SIPC, Sohar, Sultanate of Oman.
Mob: +968 96503261.
SKILLS
Knowledge of P&ID, GA and
isometrics.
In-depth knowledge of Quality
Control Management and
Auditing Procedure.
Knowledge of class
requirements, relevant codes
and standards for piping
(ASME, API & ASTM, AWS,
etc.)
Knowledge of Piping Pre-
fabrication, erection, Pre-
Commissioning and
Commissioning Activities.
Knowledge of Piping &
Structural Materials.
Ability to work under
minimum guidance and
monitoring.
MS office Tools
SAP, AutoCAD & Nevis
Model.
ACHIEVEMENTS
Certificate of Appreciation
from ADMA OPCO.
Attended training on
Operation of Total station
conducted by SOKKIA.
Supervisory Development
Program by Symbiosis
Institute of Business
Management.
PERSONAL DETAILS
Date of Birth : 02-Apr-1988
Sex : Male
Nationality : Indian
Passport No : G9252667
Date of Issue : 09/07/2008
Date of Expiry : 08/07/2018
Marital Status : Single
Languages : English,
Hindi, Malayalam, Tamil.
Working visa in Oman valid
till Oct-2017.
