MECHANICAL LIVE PROJECTS @ MECH WIND TECHNOLOGIES, HYDERABAD, PH 9542878334.ew
RESUME - Mechanical Engineering (MECH)
37
RESUME 1 Name (in Block Letter) with initials at the end : Dr.Elanchezhian.C 2 Address for Communication : F3, Madhuram flats,no.169, Radha nagar main road, chromepet,Chennai-44 3 E-mail id (valid and functional) : [email protected] 4 Mobile Number (valid and functional) : 09841715119* 5 Nationality : Indian 6 Community : MBC 7 Gender : Male 8 Date of Birth : 08.01.1968 9 Educational Qualification(s) : Qualifications Specialization Board / University / Institution Year of Passing Percentage SSLC State board 1984 60 HSC vocational State board 1986 78 *UG Mechanical&p roduction Annamalai university 1993 60 *PG production Annamalai university 1999 64 M.S M.Phil Ph.D Manufacturing Anna university 2011 Others : 10 Professional Societies Membership : life member ; ISTE 11 Experience in other Institutions / Industry : Name of the Organization Designation Period Nature of work Experience From To Years Month
Transcript of RESUME - Mechanical Engineering (MECH)
RESUME
1Name (in BlockLetter) with initialsat the end
:Dr.Elanchezhian.C
2 Address forCommunication :
F3, Madhuram flats,no.169, Radha nagarmain road, chromepet,Chennai-44
3 E-mail id (valid andfunctional) :
4Mobile Number(valid andfunctional)
:09841715119*
5 Nationality : Indian
6 Community : MBC
7 Gender : Male
8 Date of Birth : 08.01.1968
9 Educational Qualification(s) :
Qualifications Specialization Board / University /Institution
Year ofPassing Percentage
SSLC State board 1984 60
HSC vocational State board 1986 78
*UG Mechanical&production Annamalai university 1993 60
*PG production Annamalai university 1999 64
M.S
M.Phil
Ph.D Manufacturing Anna university 2011
Others :
10 Professional Societies Membership : life member ; ISTE
11 Experience in other Institutions / Industry :
Name of theOrganization Designation
Period Nature ofwork
Experience
From To Years Month
Annaivelankannipolytechinic
Lecturer 1994 2000 Teaching 6 6
Total Experience (A)
12 Experience in sri sairam engineering college Institution:
Name of theOrganization Designation
Period Nature ofwork
Experience
From To Years Month
Sri SairamEngg.college
Lecturer 2000 2002 Teaching 2 5
Sri SairamEngg.college
Sr.lecturer 2002 2007 Teaching 4
Sri SairamEngg.college
Asst. prof 2007 2011 Teaching 4 5
Sri SairamEngg.college
Professor 2011 till Teaching 10
Total Experience (B) 20.10Years
Total Experience (as on 01.01.2021) Grand Total (A+B) 27.4Years
13 Details of Ph.D Guided / Guiding :Total numbers guidided: 10One Ph.D . AwardedOne scholar submitted synopsisS.NO Name of the
Researchscholar
University RegistrationNo. &
Year ofregistration
Title of the Research StatusCourse
work/Confirmation/
Synopsis/Thesis/Completed
1 SureshKumar K.S
AnnaUniversity
1214239808 Wind Effects of anUpstream Buildingon Low rise building
ThesisSubmited
2 Muthaiyan D AnnaUniversity
1513299902 ExperimentalAnalysis ofcomposite materialin application ofautomotivecomponents
ConfirmationCompleted
3 Raja A AnnaUniversity
1514299758 Development andInvestigations of
ConfirmationCompleted
Fiber MetalLaminates forAutomotiveApplication
4 Karthick S AnnaUniversity
1614299116 ExperimentalInvestigation ofSurface treatedAustenitic stainlesssteel to improveCorrosion behavior
ConfirmationCompleted
5 Sivaraj S AnnaUniversity
16142997165 ExperimentalAnalysis ofComposite Materialin Application ofAutomobileComponent
Course Work
6 Dinesh S AnnaUniversity
17122991251 An ExperimentalAnalysis ofComposite Materialsin Application OfShip Building
ConfirmationCompleted
7 Idayan A AnnaUniversity
2011172013 Effect of DeepCryogenicTreatment on theDimensionalStability of Aisi440C Bearing Steel
SynopsisSubmitted
8 DhandapaniN
AnnaUniversity
2011172055 ExperimentalInvestigation ofBiomaterial Used forArtificial HipProsthesis
SynopsisSubmitted
9 Palani K SCSVMVUniversity
RM14ME120 ExperimentalInvestigation ofFSW AA8011aluminum withtitanium alloy
Completed
14 Patents Details :Title; Reinforced Aluminum metal matrix composites and process for making the same .Filling date .19.12.2019.Application No.2019410527711.Automatic Pneumatic Gears Shifting Mechanism in Two Wheeler(Use of Sensor andMicrocontroller) -2017410207212.Development of Polypropylene Based Nylon Glass Filled Composite and Acacia FibreComposite – 2017410207203.SMART MULTIPURPOSE AGRICULTURAL COMPANION ( IN PROGRESS)PatentNumber : 202041006864
15 International Conference (s) :
1. Vijaya Ramnath. B, ELANCHEZHIAN .C, and Kesavan.R, ” Productivity improvementof an ELR belt assembly system using Lean Manufacturing”, Proceedings of InternationalConference on International Conference on Global business strategy in competitiveEnvironment, Sri Sai Ram Institute of Management studies, Sri Sairam EngineeringCollege, Chennai, Proc. pp.223,2007.
2. Vijaya Ramnath. B, ELANCHEZHIAN .C, and Kesavan.R, ” Lean Manufacturing forreducing Loading, Unloading and Cycle Time”, Proceedings of International Conference onInternational conference -FAME-2008, Dept.of Mechanical Engineering, MEPCO EngineeringCollege, Sivakasi. Proc. pp .154, 2008.
3. Vijaya Ramnath. B, ELANCHEZHIAN .C, and Kesavan.R, ” Assembly Line Optimizationthrough Lean Manufacturing”, Proceedings of International Conference on Internationalconference on innovations, Department of Commerce, Loyola college, Chennai, Proc.pp.13,2009.
4. Vijaya Ramnath. B, ELANCHEZHIAN .C, and Kesavan.R, ” Value stream mapping – Atool for implementing Lean Manufacturing”, Proceedings of International Conference onInternational Conference on Impact of Economic crisis in Global business scenario, SriSairam Institute of Management studies, Sri Sairam Engineering College, Chennai, Proc.pp.421,2009.
5. Vijaya Ramnath. B, ELANCHEZHIAN .C, and Kesavan.R, ” Batch Size OptimizationThrough Lean Manufacturing For A Constrained Changeover Time”, Proceedings ofInternational Conference on International Conference on Impact of Economic growth inGlobal market, Delhi University, New Delhi,2009.
6. Vijaya Ramnath. B, ELANCHEZHIAN .C, and Kesavan.R, ” A Multi Attribute DecisionMaking Model for Selecting Suitable Assembly Method among Line side, Lean-kitting andKanban assembly”, Proceedings of International Conference on International Conferenceon Advances in Industrial Engineering Applications, Dept. of Industrial Engg., AnnaUniversity, Chennai, Proc. pp.MC 02, 2010.
7. Vijaya Ramnath. B, ELANCHEZHIAN .C, and Kesavan.R, ” Goal Programming approachto find Optimal Batch Size”, Proceedings of International Conference on Innovation,management systems, ACCEE-SINGAPORE”, Proc. Pp. M32, 2010. (Proceeding publishedby World Academic Press.)
8. Vijaya Ramnath. B, ELANCHEZHIAN .C, and Kesavan.R, ” Optimal Batch Size Model fora constrained changeover Time”, Proceedings of International Conference on InternationalJoint Journal conference in Engineering, Trivandram, Proc. Pp. M182, 2010.
10. Vijaya Ramnath. B, ELANCHEZHIAN .C, and Kesavan.R,” A multi dimensional decisionmaking model for selection of optimal assembly method”, Proceedings of InternationalConference on International Conference on Operational Research for Urban And RuralDevelopment, Dept. of Mechanical Engg., Thiagarajar College of Engineering, Madurai,Proc. Pp.45, 2010.
11. Dr.C.ELANCHEZHIAN and Dr.B.Vijaya Ramnath “Automated equipment forcharacterization of web media COF & stiffness measurement “Proceedings of ICIII 2012held at Singapore during March 17 - 18, 2012.
12. Jai Vignesh. M, Harikrishnan.R, elanchezhian .R, Vijaya Ramnath. B andELANCHEZHIAN .C,” Fabrication and Characteristics of Al2O3-Sic Reinforced AluminiumAlloy Matrix Composites by Stir Casting Technique”, Proceedings of ICCIAMR -2013, Dept.
of Mechanical Engineering, Vel’s University, Chennai. Proc. vol.AB; pp.130, 2013.
13. Sathish Kumar .M, ELANCHEZHIAN .C and Vijaya Ramnath. B,” Experimental study andMechanical Behaviour of GFRP Composites with Varying Thickness”, Proceedings ofICCIAMR -2013, Dept. of Mechanical Engineering, Vel’s University, Chennai. Proc. vol.AB;pp.25, 2013.
14. Hemalatha. J, ELANCHEZHIAN .C and Vijaya Ramnath. B,” Experimental study andMechanical Behavior of Glass and Carbon Fiber Reinforced Composites at Varying Strainrates”, Proceedings of International Conference on ICCIAMR -2013, Dept.of MechanicalEngineering, Vel’s University, Chennai. Proc.vol.AB; pp.14, 2013.
15. Hemalatha. J, ELANCHEZHIAN .C and Vijaya Ramnath. B,” Mechanical Behavior ofGlass and Carbon Fiber Reinforced Composites at Varying Strain rates and Temperatures”,Proceedings of International Conference on ICAMEE-2013, Dept.of Mechanical Engineering,Dr. M.G.R Educational and Research Institute University, Chennai. Proc. pp .73, 2013.
16. B.Vijaya Ramnath, C Vinodh Krishna, S Karthik, K Saravanan, V.M. Manickavasagamand C.ELANCHEZHIAN “Evaluation of the Flexural Properties of Pineapple ReinforcedPolymer Composite for Automotive and Electrical Applications”, Paper ID: 54, Proceedingsof The 3rd International Conference on Advanced Materials and EngineeringMaterials, Singapore, December.14‐15, 2013.
17. B.Vijaya Ramnath, C Vinodh Krishna, S Karthik, K Saravanan, V.M. Manickavasagamand C.ELANCHEZHIAN “Experimental Investigation of Tensile Properties of Manila FibreReinforced Polymer Composite ”, Proceedings of Twenty-Second International Conferenceon Processing and Fabrication of Advanced Materials (PFAM XXII), Singapore, 18-20December 2013.
18. M.Rama Subramanianm, C.Elanchezhian etal, “Optimization of energy consumptionusing absorption refrigenation system in Refineries” Proceedings of 5 th InternationalConference, March 2014, ISBN : 978-93-82702-67-2
19. B.Vijaya Ramnath, C.ELANCHEZHIAN, S.P.Saikeerthi, “Investigation And Analysis ofMechanical Properties of Boron Carbide Reinforcement On Aluminium 6061- B4c-SicComposite” Thiruvalluvar College of Engineering and Technology/ ICFTME-2014
20. C.ELANCHEZHIAN, B.Vijaya Ramnath, K Praveen Kumar, “ Estimation And Analysis ofPhysical, Mechanical, Morphological And Water Absorption Properties of Wood Flour FilledPolypropylene Composite” Thiruvalluvar College of Engineering And Technology/ ICFTME-2014
21. B.Vijaya Ramnath, C.ELANCHEZHIAN, P Krishnakumar, “Fabrication And Investigationof Mechanical Behavior of Polypropylene And Glass Fiber Based Golf Shaft” ThiruvalluvarCollege of Engineering and Technology/ ICFTME-2014
22. C.ELANCHEZHIAN, B.Vijaya Ramnath, N.Arun Kumar, “An Analysis To Optimize TheProcess Parameters of Friction Stir Welded AA7075 Aluminium Alloys” Thiruvalluvar Collegeof Engineering and Technology/ ICFTME-2014.
23. B.Vijaya Ramnath, C.ELANCHEZHIAN, V.M.Manickavasagam,Vishal Chandrasekar,Bala Avinash, ”Investigation of Influence of Resin on Mechanical Behaviour of GlassFiber/SiC Reinforced and SiC Polymer Composites”, Proceedings of International conference
on ICMPC-2014, Dept. of Mechanical Engineering, GRIET, Hyderabad. Proc. pp.XXX, 2014.
24. C.ELANCHEZHIAN,B.Vijaya Ramnath, J.Hemalatha,”Mechanical Behaviour of Glassand Carbon Fibre Reinforced Composites at Varying Strain Rates and Temperature”,Proceedings of International conference on ICMPC-2014, Dept. of Mechanical Engineering,GRIET, Hyderabad. Proc. pp.XXX, 2014.
25. B. Vijaya Ramnath, C.ELANCHEZHIAN, Vishal Chandrasekhar, A. Arun Kumar, S.Mohamed Asif, G.Riyaz Mohamed, D. Vinodh Raj ,C .Suresh Kumar,” Analysis andOptimization of Gating System for Commutator End Bracket”,Proceedings of Internationalconference on ICMPC-2014, Dept. of Mechanical Engineering, GRIET, Hyderabad. Proc.pp.XXX, 2014.
26. K. Venkataraman, B.Vijaya Ramnath , V.Muthu Kumar ,C.ELANCHEZHIAN, ”Application of valve steam mapping for reduction of cycle time in amachining process”, Procedia Materials Science, Volume 6, 2014, Pages 1187-1196
27. C. ELANCHEZHIAN, N.Arun kumar and B.Vijaya Ramnath “An analysis to optimize theprocess parameters of friction stir welded AA7075 aluminium alloys” Proceedings ofInternational conference on ICCIAMR-2014, Dept. of Mechanical Engineering, VELSuniversity, Chennai. Proc. pp.XXX, 2014.
28. C.ELANCHEZHIAN, B.Vijaya Ramnath ,Praveen Kumar.K, Saikeerthi.S.P, M.Sathishkumar, ’Determination Of Mechanical Properties Of Notched Weft Knitted Glass Fiber InVariable Thickness Composites’, Proceedings of International conference on ICCIAMR-2014, Dept. of Mechanical Engineering, VELS university, Chennai. Proc. pp.XXX, 2014.
29. B. Vijaya Ramnath, Rajesh S , C. ELANCHEZHIAN , V. Vignesh, V. Vijai Rahul,V.Tamilselvan , S.U. Sathya Narayanan ‘ Investigation of Mechanical behaviour of Glass fibrebased SiC polymer composites’, Proceedings of International conference on ICCIAMR-2014,Dept. of Mechanical Engineering, VELS university, Chennai. Proc. pp.XXX, 2014.
30. V.M.Manickavasagam, B Vijaya Ramnath, C ELANCHEZHIAN , J Jenish S.JayavelV.Muthukumar, ‘Investigation on impact and compression Properties of PineappleReinforced Polymer Composite’ Proceedings of International conference on ICCIAMR-2014,Dept. of Mechanical Engineering, VELS university, Chennai. Proc. pp.XXX, 2014.
31. B. Vijaya Ramnath, C. Parswajinan, C. ELANCHEZHIAN, S. V. Pragadeesh, P. R.Ramkishore, V. Sabarish, ‘A Review on CNT Reinforced Aluminium and Magnesium MatrixComposites’, Proceedings of International conference on ICCIAMR-2014, Dept. ofMechanical Engineering, VELS university, Chennai. Proc. pp.XXX, 2014.
32. C.ELANCHEZHIAN, S.Praveen Kumar and B.Vijaya Ramnath “Estimation of Physical,Mechanical and Morphological Properties Of Wood Flour Filled Polypropylene Composite”Proceedings of International conference on ICCIAMR-2014, Dept. of MechanicalEngineering, VELS university, Chennai. Proc. pp.XXX, 2014.
33. C.ELANCHEZHIAN, S.Praveen Kumar and B.Vijaya Ramnath “Estimation Of Physical,Mechanical and Morphological Properties Of Wood Flour Filled Polypropylene Composite”Proceedings of International conference on ICMOC-2014, Dept. of Mechanical Engineering,Noorul Islam university, Kumaracoil. Proc. pp.XXX, 2014.
34. C. ELANCHEZHIAN, N.Arun kumar and B.Vijaya Ramnath “An analysis to optimize theprocess parameters of friction stir welded AA7075 aluminium alloys” Proceedings ofInternational conference on ICMOC-2014, Dept. of Mechanical Engineering, Noorul Islamuniversity, Kumaracoil. Proc. pp.XXX, 2014.
35. Vijaya Ramnath B, Manickavasagam V.M, ELANCHEZHIAN C, Karthik S, VinodhKrishna C, Saravanan K “Investigation of Tensile Properties of Manila Fibre ReinforcedComposite” Proceedings of International conference on ICMOC-2014, Dept. of MechanicalEngineering, Noorul Islam university, Kumaracoil. Proc. pp.XXX, 2014.
36. Vijaya Ramnath B., C. Parswajinan, C. ELANCHEZHIAN, R.Gladwin Immanuel,RM.Annamalai, S.Aravind “Investigation of tensile property of Aluminium Sic metal matrixcomposite” Proceedings of International conference on ICMOC-2014, Dept. of MechanicalEngineering, Noorul Islam university, Kumaracoil. Proc. pp.XXX, 2014.37. B Vijaya Ramnath, S Rajesh, C.ELANCHEZHIAN, Vishal Chandrasekhar, Bala Avinash, “Investigation on influence of resin on Tensile behaviour of glass fibre-siC PolymerReinforced Composites” Proceedings of International conference on ICMOC-2014, Dept. ofMechanical Engineering, Noorul Islam university, Kumaracoil. Proc. pp.XXX, 2014.
38. B. Vijaya Ramnath, V.M. Manickavasagam, C. ELANCHEZHIAN, A. SanthoshShankar, R. Sundarrajan, S. Vickneshwaran, S. Pithchai Pandian, ‘A Review onInvestigation on Flexural and Impact Properties of Abaca and Manila Hybrid Composite’,Proceedings of International conference on GMEE 2014, Hong Kong, 21-22 September2014,Proc. pp.9.
39.V.M. Manickavasagam, B. Vijaya Ramnath, C.ELANCHEZHIAN, V. Vignesh ,V. VijaiRahul S.U. Sathya Narayanan, V.Tamilselvan, ‘A Review on Investigation on Compressionand Hardness Properties of Abaca and Manila Hybrid Composite ’, Proceedings ofInternational conference on ICMSSM-2014, Paper ID: M380.
40. B. Vijaya Ramnath, C . Parswajinan, C. ELANCHEZHIAN, S. V. Pragadeesh, C.Kavin,P. R. Ramkishore, V.Sabarish, ‘A Review on Experimental Investigation onCompression and Chemical Properties of Aluminium Nano Composite’, Proceedings ofInternational conference on ICMSSM-2014, 8- Paper ID: M363.
41. C.ELANCHEZHIAN, B.Vijaya Ramnath, R.Saisundararam, V.Ramanan, C.S.Siddarth,P.Kandeepa thondaiman, V.Maurya sundar, S.M.Mohammed sadiq, , ‘Investigating theweld strength of AA7075 aluminium alloy for TIG, MIG and FSW welding’, Proceedings ofInternational conference - ICAMME 2014, Paper ID: 12.
42. Vijaya Ramnath B, ELANCHEZHIAN C, JayaKumar C.V , Manickavasagam U. S.Aswin, H. Eashwar, P. Kavirajan, D. Murugan, , ‘Investigation of Flexural Characteristics ofFlax and Abaca Hybrid Epoxy Composites’, Proceedings of International conference -ICAMME 2014, Paper ID: 54.
43. Vijaya Ramnath B, Manickavasagam V.M, ELANCHEZHIAN C, Kavin C, KarthikSubramanian B, Rahul V , ‘Investigation of Tensile Properties of Manila Fibre ReinforcedComposite’, Proceedings of International conference - ICAMME 2014, Paper ID: 52.
44. Manickavasagam V.M , Vijaya Ramnath B., ELANCHEZHIAN C., Sundarrajan R.,Vickneshwaran S., Santhosh Shankar A., Kaosik R ., Santhosh Kumar K. , ‘Evaluation ofthe double shear and hardness properties of abaca and flax reinforced polymer compositefor automotive applications’, Proceedings of International conference - ICAMME 2014,Paper ID: 9.
45. Manickavasagam V.M, Vijaya Ramnath B, ELANCHEZHIAN C, Ramakrishnan GS.Sathish, L.R. Prasanna Venkatesh, S. Pithchai Pandian, ‘Investigation Of TensileBehaviour Of Flax –Abaca Hybrid Epoxy Composite’, Proceedings of Internationalconference - ICAMME 2014, Paper ID: 8.
46. Dr.B.Vijaya Ramnath, Mr.S.Rajesh, Dr.C.ELANCHEZHIAN, S. Bharath, P.Ramanarayanan Application of MCDM model for Selecting Composite ManufacturingTechnique, Proceedings of International Conference on Technological convergence forInformation, health, food, Energy 2015 ( TCIFES 2015), organized by CSIR- CLRI on May1 & 2 2015. (accepted)
47. B.Vijaya Ramnath, ELANCHEZHIAN C, Arvindh Swamy.S, S.Gowri Prasad ,R.KeshavRaj, Investigation of Mechanical Properties of Aluminium Matrix Composites under StirCasting technique” Proceedings of International Conference on Technological convergencefor Information, health, food, Energy 2015 ( TCIFES 2015), organized by CSIR- CLRI onMay 1 & 2 2015. (accepted)
48. Rajesh.S, B.Vijaya Ramnath, C.ELANCHEZHIAN, Rayasam saisundararam,Siddarth.C.S, Varadarajan.S , “Multi component Drill Jig For Brake Lining Component “,Proceedings of International Conference on Technological convergence for Information,health, food, Energy 2015 ( TCIFES 2015), organized by CSIR- CLRI on May 1 & 2 2015.(accepted)
49. P.Venkatesan, C. ELANCHEZHIAN, B.Vijaya Ramnath, “Review on Joining ofDissimilar Composite Material(AA8011-Cu alloy) Using Friction Stir Welding and MIGWelding Process”,. Proceedings of International conference – ICFTME 2015, , Organisedby Thiruvalluvar Engineering college.
50. N.Aravind, B.Vijaya Ramnath, C.ELANCHEZHIAN, “Experimental Investigation AndMachining Of Kevlar Based Polymer Composite”, Proceedings of International conference– ICFTME 2015, Organised by Thiruvalluvar Engineering college.
51. T. Vignesh, B. Vijaya Ramnath, C. Parswajinan, C. ELANCHEZHIAN, “A Study onMechanical and Machining Characteristics of Fe-CNT Composite”, Proceedings ofInternational conference – ICFTME 2015, , Organised by Thiruvalluvar Engineeringcollege.
52. M.Chinna goundar,C. ELANCHEZHIAN, B.Vijaya Ramnath, “Review On ComparativeStudy Of Mechanical Properties On Abaca-Jute-Sisal-Carbon Fiber ReinforcedComposites’’. Proceedings of International conference – ICFTME 2015, Organised byThiruvalluvar Engineering college.
53. C. ELANCHEZHIAN, B. VijayaRamnath, M. S. Hareeshc,, S. KrishnaAdithyaRamgopale, A. S. Aashikhf, “Joining Of Aluminum And Its Alloys By FrictionWelding- A Review”, Proceedings of International conference – ICFTME 2015. Organisedby Thiruvalluvar Engineering college.
54. Mithun Muralidharan, K.N. Sripada Raghavendra, C. ELANCHEZHIAN, B. Vijaya
Ramnath, “Rveiew On Uses Of Composites In Ship Building”, Proceedings of Internationalconference – ICFTME 2015, Organised by Thiruvalluvar Engineering college.
55. C. ELANCHEZHIAN , B. VijayaRamnath, Saisundararam Rayasam,RamananViswanathan and Siddarth Coimbatore “ Evaluation of mechanical properties ofAcacia-Jute-Sisal- Glassfibre reinforced composite”, proceedings of internationalconference – ICMME 2015, organized by Department of mechanical engineering SriChandrasekharendra Saraswathi Viswa Mahavidyalaya, Kancheepuram.
56. M.Chinna goundar,C. ELANCHEZHIAN, B.Vijaya Ramnath "Review on comparativestudy of mechanical properties on abaca-jute-sisal-carbon fiber reinforcedcomposites",proceedings of national conference-NCRASEM-2015,organizedby Department of mechanical engineering Tagore Engineering College , Chennai.
57. Vijaya Ramnath B, ELANCHEZHIAN C, Kaosik R, Santhosh Kumar K, NellaiappanT.K, Shankar A and M.U Sughan"Evaluation Of Mechanical Properties Of Kenaf BasedHybrid Composites For Automotive Components Replacement"proceedings of internationalconference-ICETER-2015,organized by Department of mechanical engineering velsuniversity,chennai.
58.Chinna Gounder C ELANCHEZHIAN ,B.Vijaya Ramnath"Comparative Study OfMechanical Properties On Abaca-Jute-Sisal-Carbon Fiber Reinforced Composites"Proceedings of international conference-ICETER-2015,organized by Department ofmechanical engineering Vels university, Chennai.
59. Dr.B. Vijaya Ramnath, ELANCHEZHIAN C, Arvindh Swamy.S, S.Gowri Prasad,R.Keshav Raj "Investigation of Mechanical Properties of Aluminium Matrix Compositesunder Stir Casting technique", Proceedings of international conference on TC-IFES 2015,organized by CAAS-CLRI, MAY1-2, 2015 Chennai.
60. Dr.B.Vijaya Ramnath, Dr. C. Elenchezhian, Mr.S.Rajesh, S. Bharath, P.Ramanarayanan, R. Raghav Chander, T. Ajay, P. Praveen Kumar “Application of MCDMmodel for Selecting Composite Manufacturing Technique”, Proceedings of internationalconference ICMER 2015 organized by ICMER, 18 – 19 August 2015, Malasiya.
61. Dr.B. Vijaya Ramnath., ELANCHEZHIAN. C., Manickavasagam.V.M , ArvindhSwamy.S, Gowri Prasad. S, Keshav Raj. RDear Author, “Experimental investigation onshear and hardness of abaca based hybrid composites”, Proceedings of internationalconference ICMER 2015 organized by ICMER, 18 – 19 August 2015, Malasiya.
62. Dr. B. Vijaya Ramnath, Dr.C.ELANCHEZHIAN M. Logesh, P. Ramanarayanan,Anantha Padmanabhan V.P, S. Aravind,S.Gowthaman,” Design and fabrication ofmotorized and manually operated land tiller machine, Proceedings of internationalconference IC-HFES 2015 organized by CAASMR, 01, October, 2015, India.
63. Dr. B. Vijaya Ramnath, Dr.C.ELANCHEZHIAN M. Logesh, P. Ramanarayanan,Anantha Padmanabhan V.P, S. Aravind,S.Gowthaman,” Investigation of flexuralbehaviour of abaca -neem hybrid composite , Proceedings of international conference IC-HFES 2015 organized by CAASMR, 01, October, 2015, India.
64. C.ELANCHEZHIAN* , B.Vijaya Ramnath, K.Rajeshkannan, M.Velmurugan, S.Karthick,N.Venkatraman,” Improving the effectiveness of hydraulic power steering system in tractor ,Proceedings of international conference IC-HFES 2015 organized by CAASMR, 01,October, 2015, India.
65. Dr.B.Vijaya Ramnath, Dr. C. ELANCHEZHIAN, V.M. Manickavasagam, S. Bharath, T.Ajay, V. Manojkumar6, D. Anand Kumar, V.Sudharsanan,” Investigation of mechanicalbehaviour of abaca –neem hybrid composite , Proceedings of international conference IC-HFES 2015 organized by CAASMR, 01, October, 2015, India.
66. Vijaya Ramnath. B, ELANCHEZHIAN. C , Anish Kumar.N2, Balaji Santhosh Kumar.T ,T. Thamizh Selvan, Investigation of mechanical properties of aluminium metal matrixcomposite (Al-Al2O3-SiC), Proceedings of international conference IC-HFES 2015organized by CAASMR, 01, October, 2015, India.
67. Vijaya Ramnath. B, ELANCHEZHIAN. C.Ashwin Srivathsaav.N , KasiViswanathan.P.B, Ragavendar. R, Tamilvasanthan. B. Investigation of tensile andhardness of hybrid aluminium metal matrix composite, Proceedings of internationalconference IC-HFES 2015 organized by CAASMR, 01, October, 2015, India.
68. Dr.B.Vijaya Ramnath, Dr. C. ELANCHEZHIAN, V.M. Manickavasagam , T. R.Srinath, B. Giridharan , B. Akash, V. Siva Prasad, V.Prakash Investigation Of TensileBehaviour Of Abaca -Neem Hybrid Composite, Proceedings of international conferenceIC-HFES 2015 organized by CAASMR, 01, October, 2015, India
69. Dr. B. Vijaya Ramnath, Prof. Dr C.ELANCHEZHIAN, R.Poovarasan, S.DeshikSandeep, D.Magesh,G.Rekha, Design and fabrication of Pot in pot refrigeration System,Proceedings of international conference IC-HFES 2015 organized by CAASMR, 01,October, 2015, India.
70. S. Rajesh, B. Vijaya Ramnath, C.ELANCHEZHIAN, V.Sudharsanan, “Investigation offlexural response of kevlar composites”, Proceedings of international conferenceICMMMS16,Organised by Sri Sairam Engg., College, February 24 &25, 2016.
71 . Dr.B.Vijaya Ramnath, Dr. C. ELANCHEZHIAN, V.M. Manickavasagam, S. Bharath,T. Ajay, V. Manojkumar, D. Anand Kumar, “Determination of double shear anddelamination behavior of abaca –neem hybrid composite”, Proceedings of internationalconference ICMMMS16,Organised by Sri Sairam Engg., College, February 24 &25, 2016
72. Dr. B. Vijaya Ramnath, Dr.C.ELANCHEZHIAN, M. Logesh, P. Ramanarayanan,Anantha Padmanabhan V.P, S. Aravind, “Modelling and development of multioperated land tiller machine”, Proceedings of international conferenceICMMMS16,Organised by Sri Sairam Engg., College, February 24 &25, 2016
73. C. Parswajinan, T.Thamizh selvan, Dr. B. Vijaya Ramnath, Dr. M. Vetrivel,Dr. C.ELANCHEZHIAN, ‘A review on powder metallurgy, ferrous components,reinforcement of CNT’, Proceedings of international conferenceICMMMS16,Organised by Sri Sairam Engg., College, February 24 &25, 2016
74. Dr.B.Vijaya Ramnath, Dr. C. ELANCHEZHIAN, V.M. Manickavasagam,B.Venkadesh, B. Giridharan, B. Akash, V. Siva Prasad, “Prediction of tensilebehaviour of abaca -neem hybrid composite”, Proceedings of international conferenceICMMMS16,Organised by Sri Sairam Engg., College, February 24 &25, 2016
75. C.ELANCHEZHIAN, B.Vijaya Ramnath, K.Rajeshkannan, M.Velmurugan, S.Karthick,N.Venkatraman, “Improving the effectiveness of hydraulic power steering system intractor”, Proceedings of international conference ICMMMS16,Organised by SriSairam Engg., College, February 24 &25, 2016
76. Palani K ,ELANCHEZHIAN C, Bhaskar G.B, Vijaya Ramnath B, Sai Jagadeesh J,Manoj Kumar G, ‘Optimization of friction stir weld parameters on mechanicalproperties of aluminium alloys using taguchi based grey analysis”, Proceedings of
international conference ICMMMS16,Organised by Sri Sairam Engg., College,February 24 &25, 2016.
77. Palani K,ELANCHEZHIAN C, Bhaskar G.B ,Vijaya Ramnath B, Sai Jagadeesh J,Manoj Kumar G, “Multi response optimization of process parameters on mechanicalproperties of friction stir welded aluminium alloys using taguchi-grey method”,Proceedings of international conference ICMMMS16,Organised by Sri Sairam Engg.,College, February 24 &25, 2016.
78. B. Vijaya Ramnath,C.ELANCHEZHIAN, G.Rekha, “Implementation of concurrentdesign and manufacturing procedure for automotive parts-a review”, Proceedings ofinternational conference ICMMMS16,Organised by Sri Sairam Engg., College,February 24 &25, 2016.
79. B.Vijaya Ramnath , C.ELANCHEZHIAN , D.Keshavana, K.AshokKumara, M.Deepak,Arvind Narayan, “Prediction of compression behavior of polymer composite golfshaft”, Proceedings of international conference ICMMMS16,Organised by Sri SairamEngg., College, February 24 &25, 2016.
80. B. Vijaya Ramnath, C.ELANCHEZHIAN, Sasikkumar.V.S, Rajeshkanna.RSabareesh .S, “Design and fabrication of pot in pot refrigeration system”, Proceedingsof international conference ICMMMS16,Organised by Sri Sairam Engg., College,February 24 &25, 2016.
81. C.ELANCHEZHIAN , B.Vijaya Ramnath , B.Tamilvasanthan, “A review onexperimental analysis of friction stir welding”, Proceedings of international conferenceICMMMS16,Organised by Sri Sairam Engg., College, February 24 &25, 2016.
82. B.Vijaya Ramnath, V.M.Manickavasagam, C.ELANCHEZHIAN, V.Prakash, “A reviewon mechanical properties of natural fibers: Abaca, Bamboo, Palmyra”, Proceedings ofinternational conference ICMMMS16,Organised by Sri Sairam Engg., College,February 24 &25, 2016.
83. Jeykrishnan Janardhanan, B. Vijaya Ramnath, C Elanchezian, “Optimization ofprocess parameters on EN24 tool steel using Taguchi technique in Electro DischargeMachining”, Proceedings of international conference ICONAMMA-2016.
84. J. Jeykrishnan, Dr. B. Vijaya Ramnath, Dr. C. ELANCHEZHIAN, S. Akilesh,“Parametric analysis on Electro-chemical machining of SKD-12 tool steel”,Proceedings of international conference ICMPC16.
85. J. Jeykrishnan, Dr. B. Vijaya Ramnath, Dr. C. ELANCHEZHIAN, S. Akilesh,“Optimization of process parameters in Electro-chemical machining (ECM) of D3 diesteels using Taguchi technique”, Proceedings of international conferenceICAAMM16.
86. Vijaya Ramnath. B, Jeykrishnan. J, ELANCHEZHIAN. C, Ashok Kumar, ArvindNarayan, “Investigation of flexural behaviour of polymer composite golf shaft”,Proceedings of international conference ICAAMM16.
87. Vijaya Ramnath. B, Jeykrishnan. J, ELANCHEZHIAN. C, “Investigation of Shearbehaviour of polymer composite golf shaft”, Proceedings of international conferenceICAAMM16.
88. Vijaya Ramnath. B, ELANCHEZHIAN. C, D.Keshavan, K.Ashok Kumar, “Prediction oftensile behavior of polymer composite golf shaft”, Proceedings of internationalconference ICMPC16.
89. Vijaya Ramnath. B, ELANCHEZHIAN. C, M.Deepak, Arvind Narayan,” Investigationoftorsional behavior of polymer composite golf shaft, Proceedings of internationalconference ICMPC16.
90. B. VijayaRamnath , C.ELANCHEZHIAN , S.Rajesh , S. Jaya Prakash , B. ManojKumaar , K. Rajeshkannan, “Design and Development of Milling Fixture for FrictionStir Welding”. Proceedings of international conference PMME-2016, Paper ID: EMT-440.
91. C.ELANCHEZHIAN, B.VijayaRamnath, G.Ramakrishnan,M.Rajendrakumar,V.Naveenkumar, M.K.Saravanakumar, “Review on mechanicalproperties of natural fiber composites”. Proceedings of international conference
PMME-2016, Paper ID: EMT-443.92. C.ELANCHEZHIAN,B.VijayaRamnath, K.N.SripadaRaghavendra,
MithunMuralidharan, G.Rekha, “Design and Comparison of the Strength andEfficiency of Drive Shaft made of Steel and Composite Materials”. Proceedings ofinternational conference PMME-2016, Paper ID: EMT-386.
93. C.ELANCHEZHIAN, B.VijayaRamnath, G.Ramakrishnan, K.N.SripadaRaghavendra,MithunMuralidharan, V.Kishore, “Review on metal matrix composites for marineapplications”. Proceedings of international conference PMME-2016,Paper ID: EMT-384.
94. S. Rajesh, B. VijayaRamnath, C.ELANCHEZHIAN, M. Abhijith, R. Dinesh Riju, K.KathirKishan, “Investigation of Tensile Behavior of Kevlar Composite”. Proceedingsof international conference PMME-2016,Paper ID: EMT-382.
95. B.VijayaRamnath, C.ELANCHEZHIAN, E.Naveen, G.Rekha, M.Vidhyarajan,M.Manivannan, J.Dhanush, “Implementation of Concurrent Redesign & Manufactureprocedure for an automotive component”. Proceedings of international conferencePMME-2016,Paper ID: EMT-387.
96. S. Rajesh, B. VijayaRamnath, C.ELANCHEZHIAN, AkashChowdhury, R.AshwinSathya, K.R. Deepak, “Review on Testing of Polymer Fasteners”.Proceedings of international conference PMME-2016,Paper ID: EMT-441.
97. B. VijayaRamnath, C.ELANCHEZHIAN, J. Jeykrishnan, R. Ragavendar, P.K.Rakesh, J. SujayDhamodar, A.Danasekar, “Implementation of Reverse Engineeringfor Crankshaft Manufacturing Industry”. Proceedings of international conferencePMME-2016,Paper ID: EMT-385.
98. Vijaya Ramnath B, ELANCHEZHIAN C,S. Akilesh, R. P. Pradeep Kumar, B.Balaguru “ Investigation of mechanical behaviour of aluminium- zircon sand- tungstencarbide metal matrix composites”, Proceedings of international conference on 10thAsian-Australasian Conference on Composite Materials (ACCM-10) held in October,Korea.
99. K.S. Suresh Kumar, Dr.C. ELANCHEZHIAN and Dr.B. Vijaya Ramnath: “WindEffects Of An Upstream Building On A Low-Rise Building”, Proceedings of SecondInternational Conference on Advanced Materials, Manufacturing and AppliedScience-2017 (ICAMMAS-2017) , organized by Sri Sairam Institute of Technology,Chennai.
100. Siddique Ahmed Ghias, Vijaya Ramanath.B, ELANCHEZHIAN.C, SiddharthaDevarajan and Ramanan Nandagopan: “Wear analysis of Sintered Al-B4 CpComposite Material”, Proceedings of Second International Conference on AdvancedMaterials, Manufacturing and Applied Science-2017 (ICAMMAS-2017) , organized bySri Sairam Institute of Technology, Chennai.
101. Sri Murugan, Vijaya Ramnath.B, ELANCHEZHIAN.C and Ramanan Nandagopan:“Analysis of Mechanical and Metallurgical Properties Of PMC Gear Material”,Proceedings of Second International Conference on Advanced Materials,Manufacturing and Applied Science-2017 (ICAMMAS-2017) , organized by SriSairam Institute of Technology, Chennai.
102. S.Rajesh, B.Vijaya Ramnath, C.ELANCHEZHIAN and S.Vivek : “ExperimentalInvestigation of Tensile and Impact Behavior of Aramid-Natural Fiber Composite”,Proceedings of Second International Conference on Advanced Materials,Manufacturing and Applied Science-2017 (ICAMMAS-2017) , organized by SriSairam Institute of Technology, Chennai.
103. Siddique Ghias Ahmed, B.Vijaya Ramnath, C.ELANCHEZHIAN, D.Siddharthaand Ramanan Nandagopan: “Analysis of The Friction Welding Mechanism Of LowCarbon Steel –Stainless Steel And Aluminium – Copper”, Proceedings of SecondInternational Conference on Advanced Materials, Manufacturing and AppliedScience-2017 (ICAMMAS-2017) , organized by Sri Sairam Institute of Technology,Chennai.
104. B Janarthanan, C ELANCHEZHIAN, Dr.G.B. Bhaskar, N Ramkumar and B Vijaya
Ramnath: “Relationship between Fracture Toughness and Specimen Thickness forQuasi-isotropic Titanium/Epoxy Laminates”, Proceedings of Second InternationalConference on Advanced Materials, Manufacturing and Applied Science-2017(ICAMMAS-2017) , organized by Sri Sairam Institute of Technology, Chennai.
105. C ELANCHEZHIAN, B Vijaya Ramanth, Dr.G.B. Bhaskar and M Vivekanandhan:“An Investigation of the Mechanical Properties of Hybrid Composites in Applicationsof Automotive Industry”, Proceedings of Second International Conference onAdvanced Materials, Manufacturing and Applied Science-2017 (ICAMMAS-2017) ,organized by Sri Sairam Institute of Technology, Chennai.
106. N Thinakaran, C. ELANCHEZHIAN, B Vijaya Ramnath and J Jayaprakash:“Optimization of Total Cost in Inventory Routing Problem with Homogenous type ofVehicles using Metaheuristic algorithm – A Review”, Proceedings of SecondInternational Conference on Advanced Materials, Manufacturing and AppliedScience-2017 (ICAMMAS-2017) , organized by Sri Sairam Institute of Technology,Chennai.
107. B Vijaya Ramnath, C. ELANCHEZHIAN, V.M. Manickavasagam, R SuryaNarayanan, R Sudharshan and G Pugazhendhi: “A REVIEW ON SANDWICHCOMPOSITES AND THEIR ADVANCEMENTS”, Proceedings of SecondInternational Conference on Advanced Materials, Manufacturing and AppliedScience-2017 (ICAMMAS-2017) , organized by Sri Sairam Institute of Technology,Chennai.
108. A Raja, C. ELANCHEZHIAN and B. Vijaya Ramnath: “An Integrated Approach inSelecting Best Supplier Selection Process in Supply Chain Management Using MATLAB-A Review”, Proceedings of Second International Conference on AdvancedMaterials, Manufacturing and Applied Science-2017 (ICAMMAS-2017) , organized bySri Sairam Institute of Technology, Chennai.
109. Rajesh S, Vijaya Ramnath B, ELANCHEZHIAN C, Jeykrishnan J, JayanthiNathan S and Karthik M.R. “Optimization of Machining Parameters of Aramid NaturalHybrid Composite in Abrasive Water Jet Machining using Taguchi Method”,Proceedings of international conference ICMME 2017,Organised by SCSVMVUniversity, April 7 & 8, 2017.
110. Vijaya Ramnath B, ELANCHEZHIAN C, Naveen E, Gowtham S, Arun Kumar A,Muthuvel M.S and Akil R,” A review on aluminium metal matrix composites”,Proceedings of international conference ICMME 2017,Organised by SCSVMVUniversity, April 7 & 8, 2017.
111. B.Vijaya Ramnath, C.ELANCHEZHIAN, S.Swaminathan, Sharan Ramesh,S.Gowtham, “Investigations of tensile behaviour of basalt fiber composite” ,Proceedings of International Conference on Mechanical Materials and RenewableEnergy organised by Sikkim Manipal Institute of Technology,8-10, Dec 2017.
112. B.Vijaya Ramnath, C. ELANCHEZHIAN, J. Aravind, L. Sushil, A. Arun Kumar,“Studies on mechanical behaviour of basalt fiber composite”, Proceedings ofInternational Conference on Mechanical Materials and Renewable Energy organisedby Sikkim Manipal Institute of Technology,8-10, Dec 2017.
113. Shreyas P , Shriramkumar , Sruthisagar R , Vijaya Ramnath B andELANCHEZHIAN C ,”Studies on Mechanical Behaviour of Aluminium-SiliconCarbide-Copper Metal Matrix Composite”, International conference on mechanical,aeronautical and automotive engineering Singapore, Feb 24-26, 2018.
114. Dr. B Vijaya Ramnath, Dr. C ELANCHEZHIAN, S Abhishek Subramanian , RRakesh, S Sharun Krishnan and A L Ashwin Ramanathan, “A review on friction stirwelding of aluminium metal matrix composites (PAPER ID ICMME067) :”,Proceedings of international conference ICMME 2018, Organised by SCSVMVUniversity, March 8 & 9, 2018.
115. B.Vijaya Ramnath, C.ELANCHEZHIAN , R.Arvind, I.Dinesh, M. Hari Prasadh,“ Review on natural fiber composites (PAPER ID ICMME047)”, Proceedings ofinternational conference ICMME 2018,Organised by SCSVMV University, March 8 &9, 2018.
116. B.Vijaya Ramnath, G.Ramakrishnan, C.ELANCHEZHIAN, V.Aravinthan,A.Vignesh, “Natural fiber composites-A review (PAPER ID ICMME048) “,Proceedings of international conference ICMME 2018,Organised by SCSVMVUniversity, March 8 & 9, 2018.
117. B. Vijaya Ramnath, C. ELANCHEZHIAN, N. Ramanan, R. Dinesh Riju, M.VidhyaRajan, P SShreyas, S Shriramkumar ,” A review on sandwich and naturalfiber composites (PAPER ID ICMME051) “,Proceedings of international conferenceICMME 2018,Organised by SCSVMV University, March 8 & 9, 2018.
118. B.Vijaya Ramnath, S.Rajesh, C.Elanchezhiyan G.Pon Senthil Kumar,G.Pugazhendhi,” Determination Of Impact And Hardness Properties Of Neem-KenafFiber Reinforced Polymer Composites”, Proceedings of 4TH InternationalConference On Materials And Manufacturing Engineering-2019, 21 & 22 MAR 2019.
16 National Conference (s) :
1. Vijaya Ramnath.B., ELANCHEZHIAN.C., Gajendran.S., Kesavan.R.,” AdaptingConcurrent Engineering approach in Ejector pin manufacturing”, Proceeding ofNational conference on R-TEMMP ’07, Dept .of Mechanical Engineering, SriSairam Engineering College, Chennai, Proc. pp.139, 2007.
2. ELANCHEZHIAN.C., Vijaya Ramnath.B., Gajendran.S.,Kesavan.R.,” Implementationof TPM in Automobile Industry”, Proceeding of National conference on R-TEMMP ’07,Dept .of Mechanical Engineering, Sri Sairam Engineering College, Chennai, Proc.pp.157, 2007.
3. Vijaya Ramnath, B., ELANCHEZHIAN,C. and Kesavan,R.,” Design andmanufacturing of Generator Engine parts using reverse engineering”, Proceeding ofNational conference on Recent Advances in Design Engineering, Dept.of Mechanicaland Manufacturing Engineering, Manipal University, Manipal, Proc. pp.469,2007.
4. Vijaya Ramnath, B., ELANCHEZHIAN,C. and Kesavan,R. ”Transformation to Leanmanufacturing by an ELR belt assembly system”, Proceeding of National conferenceon National Conference on Recent Trends in Mechanical Engineering, Department ofMechanical Engineering, Sri Jayachamarajendra College of Engineering, Mysore,Proc. pp.141,2006.
5. ELANCHEZHIAN.C., Vijaya Ramnath.B., Kesavan.R.,” Quality Improvement Throughstandardization Using Multi Criteria Decision Making process”, Proceeding of Nationalconference on National Conference on A confluence of design and ManufacturingEngineers, G.K.M. College of Engineering Technology, Chennai, Proc. pp.51, 2009.
6. Vijaya Ramnath, B., ELANCHEZHIAN,C. and Kesavan,R.” Lean Manufacturing onEngine Assembly Conveyor Line”, Proceeding of National conference on NationalConference on A confluence of design and Manufacturing Engineers, G.K.M. Collegeof Engineering Technology, Chennai, Proc. pp.50, 2009.
7. Vijaya Ramnath, B., ELANCHEZHIAN,C. and Kesavan,R.” Lean manufacturing using
Kanban System in Engine valve Machining”, Proceeding of National conference onNational Conference on Recent Trends in Manufacturing Technology, Dept. OfManufacturing Engineering, College of Engineering Guindy, Chennai, Proc. pp.30,2009.
8. ELANCHEZHIAN.C., Vijaya Ramnath.B., Kesavan.R.” Implementation of TPM forImproving Machinery Utilization (A case study)”, Proceeding of National conferenceon National Conference on Technology, Education and Management Scenario inIndia, NSS College of Engineering, Palakkad, Proc. pp.20,2009.
9. Vijaya Ramnath, B., ELANCHEZHIAN,C. and Kesavan,R.” Lean Manufacturing forcycle Time Reduction in an assembly shop”, Proceeding of National conference onNational Conference on Technology, Education and Management Scenario in India,NSS College of Engineering, Palakkad, Proc. pp.24,2009.
10. Dr. B. Vijaya Ramnath and Dr.ELANCHEZHIAN “Implementation of SMED techniquefor productivity improvement of an assembly line” Proceeding of National conferenceon AIMMMS’12 held at Sri Sairam Engg. College, Chennai on 5.4.2012.
11. Dr. B. Vijaya Ramnath and Dr.ELANCHEZHIAN,” Implementation of lean SMEDconcept automotive industry for reducing rework” Proceeding of National conferenceon AIMMMS’12 held at Sri Sairam Engg. College, Chennai on 5.4.2012.
12. Dr. B. Vijaya Ramnath and Dr.ELANCHEZHIAN “Experimental Investigation on FourStroke Engine Using Kapok Methyl Ester” Proceeding of National conference onAIMMMS’12 held at Sri Sairam Engg. College, Chennai on 5.4.2012.
13. Dr. B. Vijaya Ramnath and Dr.ELANCHEZHIAN “Application of Automation inChopping Machine” Proceeding of National conference on NCRTME 2012 held atVel’s University, Chennai on 11.4.2012.
14. Dr. B. Vijaya Ramnath and Dr.ELANCHEZHIAN “Implementing Lean Manufacturingprinciples to develop an optimal assembly line” Proceeding of National conference onNCRTME 2012 held at Vel’s University, Chennai on 11.4.2012
15. Dr. B. Vijaya Ramnath ,G.Ramakrishnan and Dr.ELANCHEZHIAN “Applying SingleMinute Exchange of Die Concept in design of Fixture” Proceeding of Nationalconference on NCRTME 2012 held at Vel’s University, Chennai on 11.4.2012.
16. Dr. B. Vijaya Ramnath and Dr.ELANCHEZHIAN “Design and development of anHydraulic Engine Hoist” Proceeding of National conference on NCRTME 2012 held atVel’s University, Chennai on 11.4.2012.
17. Dr. B. Vijaya Ramnath and Dr.ELANCHEZHIAN “Performance Analysis of DieselEngine using Kapok Methyl Ester as an alternate fuel” Proceeding of Nationalconference on NCRTME 2012 held at Vel’s University, Chennai on 11.4.2012.
18. Dr. B. Vijaya Ramnath and Dr.ELANCHEZHIAN “Design and Performance Analysisof Pneumatically Controlled Automated Machine” Proceeding of National conferenceon NCRTME 2012 held at Vel’s University, Chennai on 11.4.2012.
19. C.Parswajinan, S.Rajesh, B.Vijaya Ramnath, C.ELANCHEZHIAN and S.Prabhu,”Experimental investigation on surface characteristics of Nano Iron”, Proceedings ofNational Conference on NCAME -2013, Dept.of Mechanical Engineering, Sri SairamEngineering College, Chennai. Proc. pp.36, 2013
20. Laxman. M, Manickavasagam. V.M, Venkatraman. K, Vijaya Ramnath. B andELANCHEZHIAN.C,” Implementation of Productivity Improvement Through SMEDMethodology”, Proceedings of National Conference on NCAME -2013, Dept.ofMechanical Engineering, Sri Sairam Engineering College,Chennai. Proc. pp.31, 2013.
21. J.Hemalatha,Dr.C. ELANCHEZHIAN and B.Vijaya Ramnath,” Study of Glass andCarbon Fiber Reinforced Composites at Varying Strain rates”, Proceedings ofNational Conference on NCAME -2013, Dept.of Mechanical Engineering, Sri SairamEngineering College, Chennai. Proc. pp.11, 2013.
22. M.Sathish Kumar, Dr.C.ELANCHEZHIAN and B.Vijaya Ramnath,” ExperimentalInvestigation of Tensile and Stiffness Behaviour of Notched Weft Knitted Glass FiberComposite Plates with Variable Thickness”, Proceedings of National Conference onNCAME -2013, Dept.of Mechanical Engineering, Sri Sairam Engineering College,Chennai. Proc. pp.08, 2013.
23. Laxman. M, Manickavasagam. V.M, Venkatraman. K, ELANCHEZHIAN. C andVijaya Ramnath. B,” Productivity Improvement Through ECRS Methodology”,Proceedings of National Conference on ETDM -2013, Dept.of MechanicalEngineering, Saveetha Engineering College, Chennai. Proc. pp.63, 2013.
24. Hemalatha. J, ELANCHEZHIAN .C and Vijaya Ramnath. B,” Investigation of Glassand Carbon Fiber Reinforced Composites at Varying Strain rates”, Proceedings ofNational Conference on ETDM -2013, Dept.of Mechanical Engineering, SaveethaEngineering College, Chennai. Proc. pp.63, 2013.
25. Hemalatha. J, ELANCHEZHIAN .C and Vijaya Ramnath. B,” Mechanical Behavior ofGlass and Carbon Fiber Reinforced Composites at Varying Strain rates andTemperatures”,Proceedings of National Conference on RAMM-2013, Dept.ofProduction Engineering, Velammal Engineering College, Chennai. Proc. pp .1, 2013.
26. B.Mani Rathinam,C. Mathivanan @ Gomathi ,B. Vijaya Ramnath ,C.ELANCHEZHIAN,” predicting mechanical properties of dissimilar aluminium alloy bymathematical model in friction stir welds”, Proceedings of AICTE Sponsored NationalConference on NCETMESD-2014, Dept. of Mechanical Engineering, Rajiv GandhiMemorial College of Engg. and Technology, Nandyal, Proc. pp.XXX, 2014.
27. B. Vijaya Ramnath, C. ELANCHEZHIAN , RM. Annamalai, S. Aravind, G. Arjun,”Flexural strength of hybrid metal matrix composite (Al-Al2O3-SiC) “,Proceedings ofAICTE Sponsored National Conference on NCETMESD-2014, Dept. of MechanicalEngineering, Rajiv Gandhi Memorial College of Engg. and Technology,Nandyal,Proc.pp.XXX,2014
28. P.Krishnakumar,B.Vijaya Ramanath , C.ELANCHEZHIAN,” Fabrication andInvestigation of Mechanical Performance of Polymer Based Golf Shaft”, Proceedingsof AICTE Sponsored National Conference on NCETMESD-2014, Dept. ofMechanical Engineering, Rajiv Gandhi Memorial College of Engg. and Technology,Nandyal, Proc. pp.XXX, 2014.
29. K.Praveen Kumar, C. ELANCHEZHIAN, B. Vijaya Ramnath,” Estimation Of Physical,
Mechanical, Morphological and Water Absorption Properties of Wood Flour FilledPolypropylene Composite”, Proceedings of AICTE Sponsored National Conferenceon NCETMESD-2014, Dept. of Mechanical Engineering, Rajiv Gandhi MemorialCollege of Engg. and Technology, Nandyal, Proc. pp.XXX, 2014.
30. N.Arun kumar ,C. ELANCHEZHIAN ,B.Vijaya Ramnath,” Investigation of ProcessParameters of Friction Stir Welded AA7075 Aluminium Alloys”, Proceedings of AICTESponsored National Conference on NCETMESD-2014, Dept. of MechanicalEngineering, Rajiv Gandhi Memorial College of Engg. and Technology, Nandyal,Proc. pp.XXX, 2014.
31. S.P.Saikeerthi, B.Vijaya Ramnath, C.ELANCHEZHIAN,” Experimental Evaluation ofThe Mechanical Properties of Aluminium 6061- B4c-Sic Composite”, Proceedings ofAICTE Sponsored National Conference on NCETMESD-2014, Dept. of MechanicalEngineering, Rajiv Gandhi Memorial College of Engg. and Technology, Nandyal,Proc. pp.XXX, 2014.
32. Vijaya Ramnath. B, ELANCHEZHIAN .C , S.P.Saikeerthi ,”Fabrication AndCharacteristics of- B4c-Sic Reinforced Aluminium Alloy(6061) Matrix Composites ByStir Casting Technique” Velammal Engineering College/ ERA-2014, Proc. pp.20,2014.
33. C. ELANCHEZHIAN, B.Vijaya Ramnath , K. Praveen Kumar, “Estimation ofMechanical And Water Absorption Properties of Wood Flour Filled PolypropyleneComposite” Velammal Engineering College/ ERA-2014, Proc. pp.19, 2014.
34. B.Vijaya Ramnath, C.ELANCHEZHIAN, P Krishnakumar, “Fabrication andInvestigation of Mechanical Performance of Polypropylene and Glass Fiber BasedGolf Shaft” Velammal Engineering College/ ERA-2014, Proc. pp.18, 2014.
35. Vijaya Ramnath. B, ELANCHEZHIAN .C , S.P.Saikeerthi, “Characterization of HybridSilicon Carbide And Boron Carbide Particles-Reinforced Aluminum Alloy(6061)Composites” Saveetha Engineering College/ETDTM-14,Proc. pp.19, 2014.
36. C.ELANCHEZHIAN, B.Vijaya Ramnath ,K.Praveen Kumar, “Characterization ofMechanical And Water Absorption Behaviour of Wood Plastic Composite” SaveethaEngineering College/ETDTM-14,Proc. pp.18, 2014.
37. B.Vijaya Ramnath, C.ELANCHEZHIAN, P Krishnakumar,” Investigation onMechanical Behaviour of Polypropylene And Glass Fiber Based Golf Shaft” SaveethaEngineering College/ETDTM-14,Proc. pp.17, 2014.
38. C.ELANCHEZHIAN, B.Vijaya Ramnath, N.Arun Kumar, “Influences of Different ToolPin Profile And Welding Speed Formation Of Fsw Process By Using AA7075Aluminium Alloys” Saveetha Engineering College/ETDTM-14”,Proc. pp.16, 2014.
39. Nagaraja Krishnan P,Rohit R ,B. Vijaya Ramnath, C.ELANCHEZHIAN, “Prediction ofcompression behavior of polymer composite golf shaft”, Proceedings of NationalConference on ETDTM'16, Dept.of Mechanical Engineering, Saveetha Engineeringcollege, Chennai. Proc. pp., 2016.
40. S. Rajesh,B. Vijaya Ramnath, C.ELANCHEZHIAN K.Yuvaraj,R.SamsenDaniel,V.Varun Kalyanaraman, “A Review On Kevlar Composites Using Abrasive Jet
Machining”, Proceedings of National Conference on ETDTM'16, Dept.of MechanicalEngineering, Saveetha Engineering college, Chennai. Proc. pp., 2016.
41. .V.M.Manickavasagam, Dr.B.Vijaya Ramnath, Dr.C.ELANCHEZHIAN, KathirKishan.K, Rohit.B.K, Vignesh.S, Dinesh Riju, “Fabrication And Evaluation OfMechanical Properties Of Green Composites For Automotive Applications”,Proceedings of National Conference on ETDTM'16, Dept.of Mechanical Engineering,Saveetha Engineering college, Chennai. Proc. pp., 2016.
42. C. Parswajinan, Dr. B. Vijayaramnath, Dr.C.ELANCHEZHIAN, Syed MohamedBuhari A S, Muthukumaaran C, Riyaz Ahmed A, “A review on advanced multi-optimization methods used for powder metallurgy process”, Proceedings of NationalConference on ETDTM'16, Dept.of Mechanical Engineering, Saveetha Engineeringcollege, Chennai. Proc. pp., 2016.
43. Obuliei Praveen.K, Paveen.K.M, S.Rajesh, B.Vijaya Ramnath , C.ELANCHEZHIAN Experimentalinvestigation of Kevlar fiber for brake pad lining applications, “National Conference on RecentDevelopment in Automobile and Mechanical Engineering(RDAME'19), March 2019, EaswariEngineering College, Chennai
17 International Journal Publications (Indicate WOS /Scopus Indexed) :1. Vijaya Ramnath B., ELANCHEZHIAN C. and Kesavan R., “A Group decision making
AHP model for optimizing assembly system through Lean Manufacturing”,International Journal of Management Research and Technology, Vol.3, No.1, pp.239-250,2009.
2. Vijaya Ramnath, B., ELANCHEZHIAN, C. and Kesavan, R. “Value Stream Mapping -A Tool For Implementing Lean Manufacturing For A Engine Assembly Line”, ImpactJournal of Science and Technology, Vol. 4, No. 1, pp. 1-10, 2010.
3. Vijaya Ramnath B., ELANCHEZHIAN C. and Kesavan R., “Suitability Assessment ofLean Kitting Assembly through Fuzzy based simulation model”, International Journalof Computer Applications, Vol.4,No.1, pp.25-31,2010. (Impact factor :0.814).
4. Vijaya Ramnath B., ELANCHEZHIAN C. and Kesavan R., “Application of Kanbansystem for implementing Lean Manufacturing (A case study)”, Journal of EngineeringResearch and Studies, Vol.1,Issue 1,pp.138-151,2010.
5. Vijaya Ramnath B., ELANCHEZHIAN C. and Kesavan R., “Optimal Batch size modelfor a constrained changeover time”, International Journal of Recent Trends inEngineering and Technology, Vol.3, No.5, pp.33-36, 2010.
6. Vijaya Ramnath B., Kesavan R and ELANCHEZHIAN C., “Selection of optimalassembly method using Multi-Dimensions Decision Making model”, Journal ofComputing, Vol.2, Issue 9, pp.68-73, 2010. (Impact factor :0.21)
7. Vijaya Ramnath B., ELANCHEZHIAN C. and Kesavan R., “Application of analyticalhierarchy process to select Lean-Kitting assembly for an engine assembly”, AIMSInternational Journal of Management, Vol.4,No.2,pp.119-133,2010.
8. C ELANCHEZHIAN, BV Ramnath, R Kesavan,Vendor evaluation using multi criteriadecision making , International Journal of Computer Applications 5 (9), 4-9
9. Vijaya Ramnath B., ELANCHEZHIAN C. and Kesavan R., “Application of IntegerProgramming Model for Optimization design facility using Lean Manufacturing ( Acase study)”, International Journal of Reliability Quality and Operations Management,
Vol.1, No.1-2, pp.95-107,2010.
10.C ELANCHEZHIAN, B Vijaya Ramnath, R Kesavan , Vendor selection usinganalytical hierarchy process in supply chain management, , J Engg Res Studies 1(1), 118-127.
11.Vijaya Ramnath B., ELANCHEZHIAN. C. and Kesavan R., “A multi attribute decisionmaking method for selection of optimal assembly line”, Management Science Letters,Vol.1, pp.65-72, 2011.
12. Vijaya Ramnath B., ELANCHEZHIAN. C, and Kesavan R., “Reverse engineeringsystem for generator engine parts”, International Journal of Collaborative Enterprise,(Inderscience publication) Vol.2, No.2/3,pp.113-128,2011.
13.B.Vijaya Ramnath M. Jaivignesh, R. Harikrishnan, S. Dwarakesh, Jayanth Narahari,and, C.Elanchzhian “Application of Reverse Engineering in the design of land tillermachinery", International Review of Mechanical Engineering (IREME). Vol. 6 n. 7,2012, pp. 1379-1387 (Impact factor :6.46).
14.C. ELANCHEZHIAN, B. Vijaya Ramnath, Niranjan Raja R., S. Junaid Kokan, R.Sathya Narayanan, “Design of a Machine to determine Coefficient of Friction andStiffness of Web Media “, International Review of Mechanical Engineering. Vol. 6 No.7, pp. 1515-1520. (Impact factor :6.46).
15.B.Vijaya Ramnath, R. Niranjan raja, S. Junaid Kokan, R. Sathya Narayanan, S.Rajesh, and C. ELANCHEZHIAN, “Properties and Performance Analysis of WovenRoving Composite Laminates for Automotive Panel Board Applications” AdvancedMaterial Research, Vol.683, 2013, pp21-24. (Impact factor :0.158).
16.B.Vijaya Ramnath, C Vinodh Krishna, S Karthik, K Saravanan, V.M.Manickavasagam and C.ELANCHEZHIAN “Evaluation of the Flexural Properties ofPineapple Reinforced Polymer Composite for Automotive and Electrical Applications”,Advanced Material Research, Vol.893-720,2014, pp 271-274 (Impact factor :0.158).
17.C.ELANCHEZHIAN, B.Vijaya Ramnath ,Praveen Kumar.K, Saikeerthi.S.P, M.Sathishkumar, ’ Determination Of Mechanical Properties Of Notched Weft Knitted GlassFiber In Variable Thickness Composites’, International Journal Applied Mechanicsand Materials, Volume 591, June 2014, Pages 124-127. (Impact factor: 0.4).
18.N.Arun kumar C. ELANCHEZHIAN, B.Vijaya ramnath, “ Investigation of ProcessParameters of Friction Stir Welded AA7075 Aluminium Alloys”, International Journalof Engineering Research, Volume 1, 2014, Pages 148-150.
19.Krishnakumar.P Dr B.Vijayaramanath C.ELANCHEZHIAN, “Fabrication andInvestigation of Mechanical Performance of Polymer Based Golf Shaft “,InternationalJournal of Engineering Research, Volume 1, 2014, Pages 87-91.
20.Praveen Kumar K, C. ELANCHEZHIAN, B. Vijayaramnath, “Estimation of Physical,Mechanical, Morphological and Water Absorption Properties of Wood Flour FilledPolypropylene Composite”, International Journal of Engineering Research, Volume 3,2014, Pages 82-86.
21.Saikeerthi.S.P, Vijayaramnath.B, ELANCHEZHIAN.C, “ Experimental Evaluation ofThe Mechanical Properties Of Aluminium 6061- B4c-Sic Composite”, InternationalJournal of Engineering Research, Volume 3, 2014, Pages 70-73.
22.B. Vijaya Ramnath, Rajesh S , C. ELANCHEZHIAN , V. Vignesh, V. Vijai Rahul,V.Tamilselvan , S.U. Sathya Narayanan ‘ Investigation of Mechanical behaviour ofGlass fibre based SiC polymer composites’, International Journal Applied Mechanicsand Materials, Volume 591, June 2014, Pages 142-145. (Impact factor: 0.4).
23.V.M.Manickavasagam, B Vijaya Ramnath, C.ELANCHEZHIAN , J Jenish S.JayavelV.Muthukumar, ‘Investigation on impact and compression Properties of PineappleReinforced Polymer Composite’, International Journal Applied Mechanics andMaterials, Volume 591, June 2014, Pages 116-119. (Impact factor: 0.4).
24.B.Vijaya Ramnath.B, Vishal chandrasekar, C.ELANCHEZHIAN K.Venkataraman,Vinoth Selva Bruce L, ‘Value stream evaluation and simulation to improve materialflow and productivity’, International Journal Applied Mechanics and Materials, Volume612, 2014, Pages 89-95. (Impact factor: 0.4).
25.B.Vijaya Ramnath, C. Parswajinan, C. ELANCHEZHIAN, S. V. Pragadeesh, P. R.Ramkishore, V. Sabarish, ‘A Review on CNT Reinforced Aluminium and MagnesiumMatrix Composites’, International Journal Applied Mechanics and Materials, Volume591, June 2014, Pages 120-123. (Impact factor: 0.4).
26.B.Vijaya Ramnath, V.Santhosh Kumar, P.V.Nirmal, S.Karthick, G.Prem Kumar, C.ELANCHEZHIAN , S.Rajesh , K.Suresh , :Experimental Investigation ofMechanical behavior of Jute-Flax based Glass Fiber reinforced composite”, Fibersand polymers, Volume 15, Pages 1251-1262,2014. (Impact factor: 1.112).
27.C Parswajinan, B.Vijaya Ramnath, C ELANCHEZHIAN, SV PragadeeshInvestigation on Mechanical Properties of Nano Ferrous Composite , ProcediaEngineering 97, 513-521
28.C. ELANCHEZHIAN, B.Vijaya Ramnath, J.Hemalatha, ”Mechanical Behaviour ofGlass and Carbon Fibre Reinforced Composites at Varying Strain Rates andTemperature”, International Journal Procedia Material Science, Volume 6, Pages1405-1418,2014.
29.B.Vijaya Ramnath, C.ELANCHEZHIAN, Vishal Chandrasekhar, A. Arun Kumar, S.Mohamed Asif, G.Riyaz Mohamed, D. Vinodh Raj ,C .Suresh Kumar,” Analysis andOptimization of Gating System for Commutator End Bracket”, International JournalProcedia Material Science, Volume 6, Pages 1312-1328,2014.
30.K.Venkataraman, B.Vijaya Ramnath , V.Muthu Kumar ,C.ELANCHEZHIAN, ”Application of valve steam mapping for reduction of cycle timein a machining process”, International Journal Procedia Material Science, Volume6, Pages 1187-1196, 2014.
31. B.Vijaya Ramnath, C. ELANCHEZHIAN, RM. Annamalai, S.Aravind, T. Sri AnandaAtreya, V. Vignesh, C.Subramanian, “Aluminium metal matrix composites – areview”, Reviews on advanced material science, Volume 38, October 2013, Pages
55-60. (Impact factor: 1.017).
32. B.Vijaya Ramnath, R. Niranjan Raja, S. Junaid Kokan, R. Sathya Narayanan,A.R.Rajendra Prasad, C.ELANCHEZHIAN and V.M.Manickavasagam, “Evaluation ofmechanical properties of abaca–jute–glass fibre reinforced epoxy composite”,Materials and design, Volume 51, October 2013, Pages 357-366. (Impact factor: 3.2).
33.B.Vijaya Ramnath, C. ELANCHEZHIAN, M.Jaivignesh, S. Rajesh, C. Parswajinan, A.Siddique Ahmed Ghias, “Evaluation of Mechanical Properties of Aluminium Alloy-Alumina-Boron Carbide Metal Matrix Composites”, Materials and design, Volume 58,June 2014, Pages 332-338. (Impact factor: 3.2).
34.B Vijaya Ramnath, V.M.Manickavasagam, C. ELANCHEZHIAN, C Vinodh Krishna, SKarthik, K Saravanan “Determination of mechanical properties of intra-layer abaca–jute–glass fiber reinforced composite ”, Materials and Design, Volume 60, August2014, Pages 643-652. (Impact factor: 3.2).
35.B. Vijaya Ramnath, V.M. Manickavasagam, C. ELANCHEZHIAN, A. SanthoshShankar,R. Sundarrajan, S. Vickneshwaran, S. Pithchai Pandian, ‘ Investigation onFlexural and Impact Properties of Abaca and Manila Hybrid Composite’, InternationalJournal Applied Mechanics and Materials, Volume 1051, July 2014, Page 102-106. (Impact factor: 0.4).
36.V.M. Manickavasagam, B. Vijaya Ramnath, C. ELANCHEZHIAN, V. Vignesh ,V.VijaiRahul S.U. Sathya Narayanan, V.Tamilselvan, ‘ Investigation on Compressionand Hardness Properties of Abaca and Manila Hybrid Composite ’, InternationalJournal Applied Mechanics and Materials, Volume 680, July 2014, Page 23-26.(Impact factor: 0.4)
37. B. Vijaya Ramnath, C . Parswajinan, C. ELANCHEZHIAN, S. V. Pragadeesh, C.Kavin,P. , R. Ramkishore, V. Sabarish, ‘Experimental Investigation of Compressionand Chemical Properties of Aluminium Nano Composite’, International JournalApplied Mechanics and Materials, Volume 680, July 2014, Page 7-10. (Impactfactor: 0.4).
38. C.ELANCHEZHIAN, B.Vijaya Ramnath, K.Pazhanivel, A.Vedhapuri, B.Mano,A.Manojkumar, M.Stalin, V.Vishnu , ‘Comparative study and analysis of friction stirwelding with plasma arc welding’, International Journal Applied Mechanics andMaterials, Volume 766-767, 2015, Pages 695-700. (Impact factor: 0.4).
39.C.ELANCHEZHIAN, B.Vijaya Ramnath, R.Saisundararam, V.Ramanan, C.S.Siddarth,P.Kandeepa thondaiman, V.Maurya sundar, S.M.Mohammed sadiq, , ‘Investigatingthe weld strength of AA7075 aluminium alloy for TIG, MIG and FSW welding’,International Journal Applied Mechanics and Materials, Volume 766-767, 2015, Pages727-732. (Impact factor: 0.4).
40.Vijaya Ramnath B, ELANCHEZHIAN. C, JayaKumar C.V , Manickavasagam U. S.Aswin, H. Eashwar, P. Kavirajan, D. Murugan, , ‘Investigation of FlexuralCharacteristics of Flax and Abaca Hybrid Epoxy Composites’, International JournalApplied Mechanics and Materials, Volume 766-767, 2015, Pages 183-186. (Impactfactor: 0.4)
41. Vijaya Ramnath B, Manickavasagam V.M, ELANCHEZHIAN. C, Kavin C, KarthikSubramanian B, Rahul V , ‘Investigation of Tensile Properties of Manila FibreReinforced Composite’, International Journal Applied Mechanics and Materials,Volume 766-767, 2015, Pages 96-99. (Impact factor: 0.4).
42.Manickavasagam V.M , Vijaya Ramnath B., ELANCHEZHIAN C., Sundarrajan R.,Vickneshwaran S., Santhosh Shankar A., Kaosik R ., Santhosh Kumar K. , ‘Evaluationof the double shear and hardness properties of abaca and flax reinforced polymercomposite for automotive applications’, International Journal Applied Mechanics andMaterials, Volume 766-767, 2015, Pages 85-89. (Impact factor: 0.4).
43.Manickavasagam V.M, Vijaya Ramnath B, ELANCHEZHIAN C, Ramakrishnan GS.Sathish, L.R. Prasanna Venkatesh, S. Pithchai Pandian, ‘Investigation Of TensileBehaviour Of Flax –Abaca Hybrid Epoxy Composite’, International Journal AppliedMechanics and Materials, Volume 766-767, 2015, Pages 140-143. (Impact factor:0.4).
44.B.Vijaya Ramnath, R. Sharavanan, M. Chandrasekaran, C. ELANCHEZHIAN, R.Sathyanarayanan, R. Niranjan Raja, and S. Junaid Kokan, “ExperimentalDetermination of Mechanical Properties of Banana Jute Hybrid Composite”, Fibersand polymers, Volume 16, Pages 164-172, 2015. (Impact factor: 1.112).
45. C. ELANCHEZHIAN, B. Vijaya Ramnath, M. U. Sughan, K. Suseetharan V. VarunKumar, R. Vezhavendan and R.Kaosik “Evaluation of mechanical properties of humanhairbombyx mori silk fiber reinforced epoxy based biocomposite “ARPN Journal ofEngineering and Applied Sciences, VOL. 10, NO. 13, 2015,5498- 5505. (Impactfactor: 0.7).
46. C. ELANCHEZHIAN, B. Vijaya Ramnath, Kaosik R., Nellaiappan T. K., SanthoshKumar K., Kavirajan P. and Sughan m. u. “Evaluation of mechanical properties ofkenaf based hybrid composite for automotive components replacement” ARPNJournal of Engineering and Applied Sciences, VOL. 10, NO. 13, 2015, 5518- 5523.(Impact factor: 0.7)
47. Vijaya Ramnath B , Manickavasagam V. M. , Elanchezhian C. , Karthick R., BharathU., Maruthi Kishore R. A. and Rahul R. “investigation of tensile and impact behaviourof abaca-raffia hybrid composite” ARPN Journal of Engineering and Applied Sciences,VOL. 10, NO. 13, 2015,5577-5580. (Impact factor: 0.7).
48. B.Vijaya Ramnath , C.ELANCHEZHIAN, D.Keshavan. K. Ashok Kumar, “Predictionof tensile behavior of polymer composite golf shaft”, Volume 4, Issue 2, Part A, 2017,Pages 3356–3360, Elsevier – Materials Today selected from ICMPC16.
49. B.Vijaya Ramnath , C. ELANCHEZHIAN, M. Deepak, Arvind Narayan,” Investigationof torsional behavior of polymer composite golf shaft”, Volume 4, Issue 2, Part A,2017, Pages 3342–3345, Elsevier – Materials Today selected from ICMPC16.
50. S. Rajesh, B. Vijaya Ramnath, C.ELANCHEZHIAN, V.Sudharsanan, “Investigationof flexural response of kevlar composites”, Indian Journal of Science andTechnology, Vol. 9,S(1), 2016 selected from ICMMMS’16.
51.Jeykrishnan Janardhanan, B. Vijaya Ramnath, C Elanchezian, “Optimization of
process parameters on EN24 tool steel using Taguchi technique in Electro DischargeMachining”, IOP Conf. Series: Materials Science and Engineering 149 (2016) 012022,PP.1 to 11.
52.J. Jeykrishnan, Dr. B. Vijaya Ramnath, C. ELANCHEZHIAN, S. Akilesh, “Parametricanalysis on Electro-chemical machining of SKD-12 tool steel”, Volume 4, Issue 2,Part A, 2017, Pages 3760–3766, Elsevier – Materials Today selected from ICMPC16.
53.J. Jeykrishnan, Dr. B. Vijaya Ramnath, C. ELANCHEZHIAN, S. Akilesh, “Optimizationof process parameters in Electro-chemical machining (ECM) of D3 die steels usingTaguchi technique”, Materials Today: Proceedings 4 (8), 7884 – 7891, 2017 –Materials Today Proceedings selected from ICAAMM16 organised by MLR, Hydrabed
54. B. Vijaya Ramnath, Jeykrishnan. J, ELANCHEZHIAN. C, Ashok Kumar, ArvindNarayan, “Investigation of flexural behaviour of polymer composite golf shaft”,Materials Today: Proceedings 4 (8), 9341-9345, 2017 – Materials Today Proceedingsselected from ICAAMM16 organised by MLR, Hydrabed.
55.Vijaya Ramnath. B, Jeykrishnan. J, ELANCHEZHIAN. C, “Investigation of Shearbehaviour of polymer composite golf shaft”, Materials Today: Proceedings 4 (8), 9218-9223– Materials Today Proceedings selected from ICAAMM16 organised by MLR,Hydrabed.
56. B. Vijaya Ramnath , C. ELANCHEZHIAN , S. Rajesh , S. Jaya Prakash , B. ManojKumaar , K. Rajeshkannan, “Design and Development of Milling Fixture for FrictionStir Welding”. Materials Today Proceedings, 5(1),PP.1832-1838, selected fromPMME-2016, Paper ID: EMT-440.
57.C. ELANCHEZHIAN, B. Vijaya Ramnath, G. Ramakrishnan, M. Rajendrakumar,V.Naveenkumar, M. K. Saravanakumar, “Review on mechanical properties of naturalfiber composites”, Materials Today Proceedings, Volume 5, Issue 1, Part 1, 2018,Pages 1785-1790 selected from PMME-2016, Paper ID: EMT-443.
58. C.ELANCHEZHIAN, B.Vijaya Ramnath, K.N.SripadaRaghavendra,MithunMuralidharan, G.Rekha, “Design and Comparison of the Strength andEfficiency of Drive Shaft made of Steel and Composite Materials”, Materials TodayProceedings, 5(1),PP.1000-1007, selected from PMME-2016, Paper ID: EMT-386.
59. C.ELANCHEZHIAN, B.Vijaya Ramnath, G.Ramakrishnan, K.N.SripadaRaghavendra,MithunMuralidharan, V.Kishore, “Review on metal matrix composites for marineapplications”, Materials Today Proceedings, 5(1),PP.1211-1218, selected fromPMME-2016, Paper ID: EMT-384.
60.S. Rajesh, B. Vijaya Ramnath, C.ELANCHEZHIAN, M. Abhijith, R. Dinesh Riju, K.KathirKishan, “Investigation of Tensile Behavior of Kevlar Composite”, MaterialsToday Proceedings, 5(1),PP.1156-1161, selected from PMME-2016,Paper ID: EMT-382.
61. B.Vijaya Ramnath, C.ELANCHEZHIAN, E.Naveen, G.Rekha, M.Vidhyarajan,M.Manivannan, J.Dhanush, “Implementation of Concurrent Redesign & Manufactureprocedure for an automotive component”, Materials Today Proceedings selected from
PMME-2016,Paper ID: EMT-387.
62.S. Rajesh, B. Vijaya Ramnath, C.ELANCHEZHIAN, AkashChowdhury, R.AshwinSathya, K.R. Deepak, “Review on Testing of Polymer Fasteners”, MaterialsToday Proceedings, 5(1),PP.1817-1823, selected from PMME-2016,Paper ID: EMT-441.
63.M.Vivekanandhan, C.Elanchezhian, B.Vijaya Ramnath and G.B.Bhaskar, “ Aresearch of the mechanical properties of Hybrid Composites in uses of automotiveIndustry” Global Journal of pure and applied Mathematics., ISSN 0973-1768 Volume13, Number 2 (2017)
64. B. Vijaya Ramnath, C.ELANCHEZHIAN, J. Jeykrishnan, R. Ragavendar, P.K.Rakesh, J. SujayDhamodar, A.Danasekar, “Implementation of Reverse Engineeringfor Crankshaft Manufacturing Industry”, Materials Today Proceedings, 5(1),PP.994-999, 2018, selected from PMME-2016,Paper ID: EMT-385.
65. E. Naveen , B. Vijaya Ramnath , C. ELANCHEZHIAN , S.S. Mohamed Nazirudeen,“Influence of organic corrosion inhibitors on pickling corrosion behaviour of sinter-forged C45 steel and 2% Cu alloyed C45 steel”, Journal of Alloys and Compounds695 (2017) 3299 to 3309 (Impact factor: 3.014).
66.Siddique Ahmed Ghias, Vijaya Ramnath.B, ELANCHEZHIAN.C, SiddharthaDevarajan and Ramanan Nandagopan: “Wear analysis of Sintered Al-B4 CpComposite Material”- Materials Today Proceedings- 2019, 16, pp. 766-775 selectedform ICAMMAS17 (Impact Factor: 0.53)
67.Sri Murugan, Vijaya Ramnath.B, ELANCHEZHIAN.C and Ramanan Nandagopan:“Analysis of Mechanical and Metallurgical Properties Of PMC Gear Material” ”-Materials Today Proceedings- 2019, 16, pp. 524-531 selected form ICAMMAS17(Impact Factor: 0.53)
68.Siddique Ghias Ahmed, B.Vijaya Ramnath, C.ELANCHEZHIAN, D.Siddhartha andRamanan Nandagopan: “Analysis of The Friction Welding Mechanism Of Low CarbonSteel –Stainless Steel And Aluminium – Copper” Materials Today Proceedings- 2019,16, pp. 766-775 selected form ICAMMAS17 (Impact Factor: 0.53)
69.A.Idayan, C.Elanchezhian, B.Vijaya Ramnath and J.Krishnakumar, “Effect of DeepCryogenic Treatment on the Dimensional Stability of Aisi 440C Bearing steel” IndianJournal of Science and Technology, Vol 9(44), DOI: 10.17485/ijst/v9i44/101987,November 2016
70. A.Idayan, C.Elanchezhian, K.Palanikumar, “Role of Cryogenic Treatment on theMicrostructure and Wear Resistance of AISI 440C Bearing Steel” Carribbean Journalof Science , Volume 53, Issue 2 (May- Aug),2019
71.B Janarthanan, C ELANCHEZHIAN, Dr.G.B. Bhaskar, N Ramkumar and B VijayaRamnath: “Relationship between Fracture Toughness and Specimen Thickness forQuasi-isotropic Titanium/Epoxy Laminates”- Materials Today Proceedings- 2019, 16,pp. 865-869 selected form ICAMMAS17 (Impact Factor: 0.53)
72.Suresh kumar, K.S, C ELANCHEZHIAN, B Vijaya Ramanth,: “Wind effects of an
upstream building on a low-rise building” - Materials Today Proceedings-2019, 16,pp. 444-448 selected from ICAMMAS17 (Impact Factor: 0.53)
73. B Vijaya Ramnath, C. ELANCHEZHIAN, V.M. Manickavasagam, R SuryaNarayanan, R Sudharshan and G Pugazhendhi: “a review on sandwich compositesand their advancements” -Materials Today Proceedings-2019, 16, pp. 1146-1151selected from ICAMMAS17 (Impact Factor: 0.53)
74. A Raja, C. ELANCHEZHIAN and B. Vijaya Ramnath: “An Integrated Approach inSelecting Best Supplier Selection Process in Supply Chain Management Using MATLAB-A Review” - Materials Today Proceedings- 2019, 16, pp. 1350-1356 selectedfrom ICAMMAS17- SIT (Impact Factor: 0.53)
75. Rajesh S, Vijaya Ramnath B, ELANCHEZHIAN C, Jeykrishnan J, Jayanthi Nathan Sand Karthik M.R. “Optimization of Machining Parameters of Aramid Natural HybridComposite in Abrasive Water Jet Machining using Taguchi Method”, AdvancedScience, Engineering and Medicine Volume 10 , 2018, Pages 1-4, selected fromICMME 2017-SCSVMV Uty
76. Sharavanana, B. Vijaya Ramnath, C. ELANCHEZHIAN, S. Rajesh, “Experimentalinvestigation of tensile and impact behaviour of hemp flax hybrid composite”,International Journal of Mechanical and Production Engineering Research andDevelopment”, Vol. 8, Issue 3, Jun 2018, 549-556.
77. Shreyas P , Shriramkumar , Sruthisagar R , Vijaya Ramnath B and ELANCHEZHIANC ,”Studies on Mechanical Behaviour of Aluminium-Silicon Carbide-Copper MetalMatrix Composite”, MATEC Web of Conferences 166, 01001 (2018).
78. . B.Vijaya Ramnath, C.ELANCHEZHIAN , R.Arvind, I.Dinesh, M. Hari Prasadh,“ Review on natural fiber composites (PAPER ID ICMME047)”, IOP ConferenceSeries: Materials Science and Engineering 390 (1), 012065,selected from ICMME2018, Organised by SCSVMV University, March 8 & 9, 2018.
79. V.M.Manickavasagam, B.Vijaya Ramnath, C.ELANCHEZHIAN, V.Aravinthan,A.Vignesh, “Natural fiber composites-A review (PAPER ID ICMME048) “,IOPConference Series: Materials Science and Engineering 390 (1), 012065, selectedfrom ICMME 2018, Organised by SCSVMV University, March 8 & 9, 2018.
80.B. Vijaya Ramnath, C. ELANCHEZHIAN, , P SShreyas, S Shriramkumar, N.Ramanan ,” A review on sandwich and natural fiber composites IOP ConferenceSeries: Materials Science and Engineering 390 (1), 012069, selected from ICMME2018, Organised by SCSVMV University, March 8 & 9, 2018.
81.G. Ramakrishnan , Vijaya Ramnath B, C.ELANCHEZHIAN Gowtham S, Arun KumarA “Investigation of mechanical behaviour of basalt-banana hybrid composites”,Silicon, November, Pp1-10, 2018.
82.A. Idayan, C. ELANCHEZHIAN, B.Vijaya Ramnath, K. Palanikumar,” Role ofCryogenic Treatment on the Microstructure and Wear Resistance of AISI 440CBearing Steel”, Caribbean Journal of Science, Volume 53, ISSUE 2 (MAY - AUG),2019 , pp. 516-533.
83.A. Idayan, C. ELANCHEZHIAN, B. Vijaya Ramnath and J. Krishnakumar,” Effect ofDeep Cryogenic Treatment on the Dimensional Stability of Aisi 440c Bearing Steel”,Indian Journal of Science and Technology, Vol 9(44), DOI:10.17485/ijst/2016/v9i44/101987, November 2016.
84. B.Vijaya Ramnath, S.Rajesh, C.Elanchezhian,G.Pon Senthil Kumar,G.Pugazhendhi,” Determination Of Impact and Hardness Properties Of Neem-KenafFiber Reinforced Polymer Composites”, accepted for publication in Lecture Notes inMechanical Engineering (Springer) ISSN: 2195-4356, which is indexed by SCOPUS.
85. M. Balachandar, B. Vijaya Ramnath, C.ELANCHEZHIAN and J. Jeykrishnan,”Prediction of mechanical properties of Al6061 metal matrix composites reinforced withzircon sand and boron carbide, Materialpruefung/Materials Testing , 61(6), pp. 537-542.
86.Srimurugan, R., Vijaya Ramnath, B., ELANCHEZHIAN, C.,” An investigation onmechanical behaviour of nylon 6-polycarbonate hybrid composite”,International Journal of Mechanical and Production Engineering Research andDevelopment 8(6),IJMPERDDEC201856, pp. 525-532.
87.S.Rajesh, M.Kesavan, B.Vijaya Ramnath, C.ELANCHEZHIAN, S.Vivek, M.HariPrasadh, “Experimental Investigation of Tensile and Impact Behavior of Aramid-Natural Fiber Composite”, Materials Today: Proceedings, Vol.16, pp 699-705, 2019
88.S.Dhinesh, ELANCHEZHIAN.C ,B.Vijaya ramnath ,R.Rama doss “ Experimental
investigation of metalmatrix composite- A review’ International journal of pure Applied
mathematics, ISSN;13118080,April 2019.
89.S.Dinesh,ELANCHEZHIAN.C ,B.Vijaya ramnath, H.Thirunavukarasu “ Evaluation of
mechanical properties of AZ31 magnesium Alloy-calcium oxide matrix composite –
international journal of Applied science and computations,vol,19,ISSN; 1076-
5131,April 2019.
91. S. Dinesh C. Elanchezhian B.Vijayaramnath R.Ramadass “Experimental
Investigation of Composite materials For Marine Application-A Review” International
Journal of Engineering ,Science And Mathematics, Vol 7,Issue 4,Apirl 2018.ISSN:2320-
0294.
92. S. Dinesh C.Elanchezhian B. Vijayaramnath “Design and Manufacturing of Fixture
for Distortion Restraints of Angular Welded Joint - A Review”-International Journal of
Mechatronics and Manufacturing Technology Volume 3 Issue 2-2018 1522-1637PP.
93. S.Dinesh C.Elanchezhian B.Vijayaramnath K.Sathiyanarayanan “Experimental
Investigation Kevlar based composite for Marine Environment- A Review” International
journal of Engineering and technology innovation.Vol 9 ,No 2,ISSN:2223-5329. Apirl 19.
94. S.Dinesh C.Elanchezhian B.Vijayramnath H.Thirunavukarasu “Evaluation Of
Mechanical Properties Of AZ31 Magnesium Alloy –Calcium Oxide Matrix Composite” –
International Journal of Applied Science and Computations.Vol 19,ISSN:1076-5131, Apirl
19.
95. S.Dinesh C.Elanchezhian B.Vijaramnath R.Ramadass “Experimental Investigation
of Metal Matrix Composite –A review” International Journal of Pure Applied Mathematics.
ISSN:1311-8080, Apirl 19.
96. S. Dinesh C.Elanchezhian B.Vijayaramnath Mohamed Suhaib “Experimental
Investigation Of Areca/Jute/Glass fiber reinforced hybrid composite Plates “Journal of
Applied Science. Vol 19, ISSN:1812-5662.
97. S.Dinesh C.Elanchezhian B.Vijayaramanath “Evalution of mechanical behavior for
animal fiberreinforced hybrid composite for marine Application”. Materials Science and
Engineering, Volume 912(2020)052012.
98. S.Dinesh C.Elanchezhian B.Vijayaramnath “Experimental Investigation of Natural
and synthetic composite for marine Application” .Materials Today Proceeding,
ISSN2214-7855 ,Volume 22 ,Part 3 ,2020,Page 322-329.
99. S.Dinesh C. Elanchezhian B Vijayaramnath “Experimental investigation of banana
bract fiberand palm fiber with epoxy hybrid composite” Materials Today :Proceeding
Volume 22 , Part 3,2020,page 335-341.ISSN2214-7855.
100. S.Dinesh, C.Elanchezhain, Devaraju Ayyanan ‘Comparative Mechanical and
Morphological Analysis Study of Untreated and NaOH treated –Banana fiber Reinforced-
Glass fiber composite’, Materials today Proceeding ISSN2214-7855.
101. Palani, K., C. Elanchezhian, K. H. V. Saiprakash, and K. Sreekanth. "Effect of
welding parameters on mechanical properties of dissimilar friction stir processed AA
8011 and AA 5083-H321 aluminium alloys." In Materials Science and Engineering
Conference Series, vol. 390, no. 1, p. 012072. 2018.
102. Palani, K., and C. Elanchezhian. "Multi response optimization of process
parameters on AA8011 friction stir welded aluminium alloys using RSM based GRA
coupled with DEA." In Applied Mechanics and Materials, vol. 813, pp. 446-450. Trans
Tech Publications Ltd, 2015.
103. Palani, K., C. Elanchezhian, and G. B. Bhaskar. "Multi Response DEA-Based
Taguchi Optimization of Process Parameters on AA8011 Friction Stir Welded Aluminium
Alloys." In Applied Mechanics and Materials, vol. 766, pp. 921-927. Trans Tech
Publications Ltd, 2015.
104. Palani, K., C. Elanchezhian, and M. Raju. "Sensitivity analysis of processparameters on tensile properties in Plasma Arc Welding of AA8011-H24 aluminium
alloys and Ti3Al2. 5V Titanium alloys using Response Surface Methodology." In IOP
Conf. Ser.: Mater. Sci. Eng., vol. 390. 2018.
105. Palani, K., and C. Elanchezhian. "Multi response Optimization of Friction stirwelding process parameters in dissimilar alloys using Grey relational analysis." In IOP
Conf. Ser.: Mater. Sci. Eng., vol. 390. 2018.
106. Palani, K., C. Elanchezhian, B. Vijaya Ramnath, and G. B. Bhaskar. "Modeling andOptimization of Process Parameters on Tensile Behavior of FSWed AA 5083-H321
Aluminium Alloys Using D-Optimal Design." Adv. Sci 10 (2018): 1-6.
107. Palani, K., C. Elanchezhian, B. Vijaya Ramnath, D. Charan, Ch Divya Prakash, R.Kathiravan, and O. Narendra Reddy. "Experimental Investigation of Welding Parameters
on Microhardness and Tensile Behaviour of Similar and Dissimilar Submerged FSWed
Aluminium Alloy Joints." In Advances in Materials and Manufacturing Engineering, pp.
355-363. Springer, Singapore.
108. Palani, K., C. Elanchezhian, B. Vijaya Ramnath, and A. Adinarayanan. "SensitivityAnalysis for Welding Parameters in Dissimilar Friction Stir Welded Joints Using
Response Surface Methodology." In Advances in Materials and Manufacturing
Engineering, pp. 345-353. Springer, Singapore.
109. Palani, K., C. Elanchezian, and G. B. Bhaskar. "Optimization of ProcessParameters on AA8011 Friction Stir Welded Aluminum Alloys Using Taguchi Based Grey
Relational Analysis."9.
110. Palani, K., and C. Elanchezhian. "Friction Stir Welding and Friction Stir Processing
of Dissimilar Alloys: A Review." In IOP Conference Series: Materials Science and
Engineering, vol. 954, no. 1, p. 012046. IOP Publishing, 2020.
111. Palani, K., C. Elanchezhian, B. Vijaya Ramnath, and R. Ramadoss.
"Hybrid Fuzzy based response surface optimization of welding parameters on
Vickers microhardness and impact strength of FSWed AA8011-H24 aluminium
alloy joints." Materials Today: Proceedings 23 (2020): 573-582.
112. M. Balachandar, B. Vijaya Ramnath. B, C.Elanchezhian and J.Jeykrishnan,” Prediction of mechanical properties of Al6061 metal matrixcomposites reinforced with zircon sand and boron carbide,Materialpruefung/Materials Testing , 61(6), pp. 537-542.
113. Alagarraja , Vijaya Ramnath. B , Elanchezhian C, “Mechanical and thermal
properties of PVC and polyurethane foam hybrid composites”, Materials Testing
May 2020, Vol. 62, No 5. Pages: 544–552, 2020.
18 National Publications (Indicate WOS /Scopus Indexed) :
1.Vijaya Ramnath, B., ELANCHEZHIAN, C. and Kesavan, R. “Impact of lean manufacturingon improving productivity of auto components manufacturing industry”, Journal ofManufacturing Technology Today, CMTI, Vol. 8, No. 5, pp. 20-26, 2009.
2.Vijaya Ramnath, B., ELANCHEZHIAN, C. and Kesavan, R. “Inventory Optimization usingkanban system-A case Study”, ICFAI Journal of Business Strategy, Vol. 6, No. 2, pp. 56-68,2009.
3.Vijaya Ramnath, B., ELANCHEZHIAN, C. and Kesavan, R. “Application of kanban systemfor implementing lean manufacturing (a case study)”, Journal of Engineering Research andStudies, Vol. 1, No. 1, pp. 138-151, 2010.
4.Vijaya Ramnath, B., ELANCHEZHIAN, C. and Kesavan, R. “Lean manufacturing for cycletime reduction in an assembly shop”, Journal of Manufacturing Technology Today, CMTI, Vol.9, No. 6, pp. 11-17, 2010.
5. Vijaya Ramnath, B., ELANCHEZHIAN, C. and Kesavan, R. “Setup Time and Changeover
Time Reduction through lean Manufacturing Concept - Single Minute Exchange Die: SMED)”,Industrial Engineering Journal, Indian Institution of Industrial Engineering, India 2011.
6. Vijaya Ramnath, B., ELANCHEZHIAN, C. and Kesavan, R. “A frame work for assessingcost effectiveness using lean and AHP – a case study”, Industrial Engineering Journal, IndianInstitution of Industrial Engineering, India. 2012
19 Programs Organized :1.Organized Faculty Development Programme Sponsored by Anna University on TotalQuality Management in the year 2005.
2. Organised Symposiums and National Conferences :Symposiums: SAIMECH-05 which appeared in The Hindu paper as bestsymposium .National conferences: AIMMS 08.
3. .Organized a workshop on “Youth development “programme for the rural people from
various villages which made them as an Entrepreneur on 12-4-2006.
4.Organized as a Chair for International Conference on Mechanical, Materials and Manufacturing
Systems-2016 (ICMMMS-2016) on 24th & 25th February, 2016 at Sri Sairam Engineering
College, Chennai-44.
5. Organized Faculty Development Programme on Robotics November 20196. Seminar Organized through TVS training and services titled PRODUCT LIFE CYCLEMANAGEMENT
7. Seminar Organized in Robotics and its application three days workshop from 15th to 17thOctober 2019.
8. Organized two days workshop in Artificial Intelligence and Robotics9. Organized two days Hands on training in robotics applications in industries.
10. Organized Guest Lecture on Industry Institution Interaction through MSME 2018-2019
11. Organized Three days Workshop on Industrial Robotics and its Applications on
05.08.2019 to 07.08.2019.
12. Coordinated ” Internship Fest 2019″ on 09.10.2019 in which around 132 students of theDepartment got internship.
20 Programs Attended:
Attended Anna University Sponsored Faculty Development Program On “computer
Aided manufacturing” at MEPCO engineering college in 2003.
Attended two days course on metallurgy and material for practicing engineers and
research 21 and 22 September 2013 at IIT madras (IIMC) organized jointly Indian
Institution of metal Chennai chapter and Department of Metallurgical and material
engineering
Attended in the workshop on recent trends in manufacturing process- (RIMP 2012) held
on 7 th and 8 th August 2012 organized by Tagore Engineering College and Sponsored
by TNST – Chennai
Attended two days workshop on recent trend in Non Destructive Evaluation of Materials
sponsored by PRNS & UGC on 24 & 25 th March 2018 at MIT, Anna University, Chennai
-600044
Attended International Conference as sponsored by DST travelling grant at Thailand in
2011
Attended CII southern region MSME technical summit 30 th October 2019 titled Vision
for the future transforming MSME- Hotel Ramada Plaza, Chennai
21 Funds Received from AICTE,/ UGC / DST/ TNSCST, etc:1. Travelling grant received from DST for attending International Conference at Thailand
2011.2. Received Rs. 20,898 as project proposal presentation at Goa 15-10-2012
22 Contribution to the Department :1.NBA coordination for 2018 accreditation2. Organizer of various department programs.3. Dynamics LAB in charge for 5 years.4. Prepared LAB manual for dynamics lab & Question Bank5. Seminar organized and ISO coordinator6. Project coordinator7. overall coordinator for 2nd year and 3rd year8. Active participation for development of department9. Arranging In plant training and Internship to the student10. Course Coordinator11. Signed MOU of Industry Intuition (Department)12. Syllabus committee coordinator (Manufacturing)13. NBA coordination
23 Contribution to the College : sir sairam engineering college
1.Robotics Club Lead2.Active member in various committees in college evens like college day, convocation,induction day and any other important events.3. Helped various colleges to join AICTE- Margadarshan scheme from 2019.
24 Any other relevant information:
Recognition & Achievements
1. Adjudged as the BEST PROJECT GUIDE by TNST for the project Battery Operated TwoWheeler done in the year 2005.
2. Received BEST TEACHER AWARD from Sri Sairam Engineering College since 2001for producing 100% results in the various subjects.
3. Acted as a Coordinator for EFFICYCLE- 2011 SAE India on 14 to 17 th October 2011Chandiragh.
4. RECEIVED BEST PROFESSOR AWARD from Education Today Maghashane13 thNovember 2013.
5. Acted as EXPERT COMMITTEE MEMBER for IGNOU –SAPET inspection team.6. Acted as University Examination external examiner and CAMP OFFICER for the central
valuation conducted by Anna University of Technology, Chennai, 2011.7. Acted as Jury for the various technical symposium organized in Engineering Colleges in
Tamil Nadu, India.8. Acted as SESSION CHAIR for National Conference on NCAME -2013, Dept.of
Mechanical Engineering, Sri Sairam Engineering College, Chennai.9. Acted as SESSION CHAIR for National Conference on ETDM -2013, Dept.of Mechanical
Engineering, Saveetha Engineering College, Chennai.10. Acted as SESSION CHAIR for International conference in Thailand 201111. Received BEST PAPER AWARD for research paper tilte “An application of supplier
selection using analytical networks process and analytical hierarchy in supply chainmanagement” published in Vol. V Issue No. 5 of Industrial Engineering Journal in May2012. Award presented on 26th October 2013, Nagpur.
12. Acted as SESSION CHAIR for Symposium 2016, Dept. of Mechanical Engineering,Eswari Engineering College, Chennai.
13. Acted as SESSION CHAIR for International conference on Engineering Material &Process (ICEMAP-2013) 23,24 th March 2013, Organized by Dept. of MechanicalEngineering, Tagore Engineering College, Chennai -127
14. Acted as SESSION CHAIR for KRATORQ13 , Organized by Dept. of MechanicalEngineering, SRM University, Vadapalani Campus, Chennai -26
15. Acted as a RESOURCE PERSON on FDP on ADVANCEMENTS IN MATERIALS,MANUFACTURING PROCESSES AND MANUFACTURING SYSTEMS sponcerd byAICTE , dated November 4 to 16 ,2013 Organised by Dept.of Mechanical Engineering,Sri Sairam Engineering College, Chennai.
16. Acted as SESSION CHAIR for International conference on Advanced in Mechanical &Energy Engg(ICMEE -2013)- 4 & 5 April 2013 , Dept. of Mechanical Engineering,Dr.MGR Research and Educational Institute, Chennai.
17. Acted as SESSION CHAIR for International conference -ICFTME-2014, Dept.ofMechanical Engineering, March 4 & 5 2014. Thiruvalluvar College of Engineering andTechnology Keynote speaker: Application of Composite Materials
18. Acted as Acted as SESSION CHAIR for International conference - ICAMME 2014,Dept.of Mechanical Engineering, 19 & 20 December 2014, Sairam Institute oftechnology, Chennai.
19. Acted as SESSION CHAIR for International conference - ICMME 2015, Dept.ofMechanical Engineering , 2 & 3 April 2015, Sri Chandrasekharendra Saraswathi Viswa
Mahavidyalaya, Kanchipuram.20. Acted as SESSION CHAIR for International Conference Apr 2015, Eswari Engineering
College, Chennai.21. Acted as a SESSION CHAIR for National Conference on Resent Trends held on 26-03-
2011 in Mechanical Engineering (RTME -2011) at GKM Engineering College, Chennai
22. Acted as SESSION CHAIR for technical Symposium SWIVEL-12 , 9 th March 2012 ,MNM Jain Engineering College Chennai
23. Appointed as a MEMBER OF RESULT PASSING BOARD PG Degree Exam held onMay, June 2012, Anna University, Chennai-25, Letter no:2842/OE/PG 2012 AnnaUniversity Office of the COE: Dated: 28/08/2012
24. Acted as a BOARD CHAIRMAN Mechanical Engineering , Letterno:28421/COE/09/PG/2012 Dated 27/6/12
25. Acted as a ORGANIZING SECRETARY for International Conference InternationalConference on Mechanical, Material & Manufacturing Systems (ICMMMS -16), 27,28January 2016 Organized by Dept.of Mechanical Engineering, Sri Sairam EngineeringCollege, Chennai.
26. Acted as SESSION CHAIR for International Conference on Advances in Materials,Manufacturing & Applied Sciences-17 (ICAMMAS-17) on 30th & 31st March,2017 held atSri Sairam Institute of Technology, Chennai.
27. Acted as a NATIONAL ADVISORY COMMITTEE MEMBER for Recent Inovaton inProduction Engineering-2017 (RIPE-2017) March 24 & 25 2017, Dept of ProductionTechnology, MIT, Chennai -44
28. Acted as SESSION CHAIR for International Conference on ICSRSBEGM17, 22 & 23September, 2017 held at Sri Sairam engineering college, Chennai.
29. Acted SESSION CHAIR for International Conference on ICAME2018-SRM Institute ofScience and Technology 22-24 March 2018.
30. Acted as SESSION CHAIR for International Conference on New Innovation &Automation in Mechanical Engineering (ICNIAME-2K18) on 3 & 4 th March,2018 held atARM College of Engineering & Technology, Chennai.
31. ACTIVE MEMBER FOR MARGADARSHAN SCHEME under AICTE,New Delhi.
32. Acted as a RESOURCE PERSON International Conference on Materials Engineering &Characterization (ICMECH-19) on 8 to 10 th May 2019- Organized by Dept of MechanicalEngineering Adhi College of Engineering & Technology
33. Acted as a RESOURCE PERSON RGM college of Engineering Technology, Nandyal,Andhra Pradesh, AICTE Sponsored Two week FDP on Advances in Material andManufacturing Technology (AMMT-2019) on 11 to 23 th November 2019- Organized byDept of Mechanical Engineering
34. RESOURCE PERSON IN FDP/WORKSHOP1. Faculty development program me organized by Anna University, Dept of Mechanical
Engineering-Chennai, 2010 on the topic “Design Of Jigs & Fixtures”.2. Faculty development programme organized by Dept. of production technology, MIT
Campus, Anna University-Chennai-44, on June - 2013 on the topic “Design &
Development of Jigs”.3. Resource Person in Technical Symposium Organised by Dept of Mechanical Engg, IFET
Engineering College, Villupuram4. Resource Person and Keynote Speaker titled “Advanced Trend in Manufacturing
Technology” Organised by Dept of Mechanical Engg, Prince Shri VenkateshwaraPadmavathy Engineering College, Chennai-48
5. Deliver a Guest Lecture on Engineering Graphics dated 3/12/2012, Organized by Dept.Of Mechancial Engineering , Tagore Engineering College, Chennai
6. AICTE sponsored FDP on Advancements In Materials, Manufacturing Processes AndManagement Systems between 4 and 16, November – 2013.
7. AICTE sponsored FDP on processing and characterization of composites materialsincluding natural fiber reinforced composites between 18 and 31, March – 2015organized by Sri Sairam Institute of Technology, Chennai.
8. Anna University sponsored FDP on Engineering Metrology and measurement between30 May and 5 June – 2016 at MIT campus.
9. Guest Lecture on Manufacturing Technology & Dynamics d, organized by SriVenketswara College of Engineering & Technology,Thirupachur in 10 th August 2012.
10. ADVISORY COMMITTEE MEMBER FOR INT. CONFERENCES IN INDIA ANDABROAD
11. International Conference on Mechanical and Manufacturing Engineering (ICMME-2015)organized by Department of mechanical engineering Sri Chandrasekharendra SaraswathiViswa Mahavidyalaya, Enathur, Kanchipuram, Tamil Nadu, India
12. Guest Lecture given to the Faculty members of Peri Institute of Technology, Chennai-titled “Teaching Methodology & Faculty student Interaction with Students”-dated16/7/2016
13. Guest Lecture given to the Faculty members of Arunai Engineering College,Thiruvanamalai titled “Teaching Methodology Interacting with Students”-2016
14. Recent Innovations in Production Engineering-2017 (RIPE-2017)- March 24th & 25th ,2017 held at Madras Institute of Technology, Chennai-44.
15. Advisory member in International Conference on “Recent Trends & Mechanical inAutomative Engineering” -2018, March 08, Anand Institute of Technology, Chennai, India.
16. Advisory member in International Conference on Materials Engineering &Characterization (ICMECH’19) 8 to 10, 2019, May, Adhi College of Engineering, India.17. Advisory member in 4th International Conference on Mechanical & Manufacturing 2020
Dubai Conference
EDITOR IN INTERNATIONAL / NATIONAL JOURNALS:1. International reviewer of International Journal of Production & Operation Management(IJPOM),.2. Editor in International Journal of, TJ Publications, India Since 2013.3. Reviewer in Brazilin Society of Mechanical Science & Engineering, Springer Publication.ELSEVIER Journal Reviewer for ;
-Journal of Materials Research and Technology.-Reviewer for the journal of Production & Operation Management.- Journal of materials today
RESEARCH SUPERVISOR:1. Anna University, Chennai, 20142. Vels University, Chennai 20123. MGR University, Chennai4. Sri Chandrasekharendra Saraswathi Viswa Mahavidyalaya University, Kanchipuram. 2013
5. St.PETER’S University, Chennai 2014
BOOKSWRITTEN
S.No Name of the book Publisher Year
1 Computer aided manufacturing Laxmi publications, New Delhi 2006
2 Manufacturing Technology-II Anuradha publications 2005
3 Engineering Economics & FinancialAccounting
Laxmi Publications, 2006
4 Engineering management Eswar Press, Chennai 2006
5 Computer Aided Design Anuradha Publications 2008
6 Workshop Manual Shreem Bhuvaneswaripublication, Chenniai
2008
7 Fluid Machinanics & Machinery Anuradha Publications, 2007
8*Machine tools
Anuradha publications2009
9 Total Quality Management IK international Publications 2010
10 Unconventional machining process Anuradha pub,Chennai-17,Tamilnadu
2005
11 Special casting process 2006
12 Computer integrated manufacturing Anuradha pub,Chennai-17,Tamilnadu
2006
13 Engineering materials and metallurgy Anuradha pub,Chennai-17 2005-06
14 Organization Behavior Umesh Publications Delhi 2006
15 Basic Mechanical and CivilEngineering Anuradha Publications,
Chennai – 17
2007
16 Strength of Materials 2006-07
17 Metrology and Measurements 2006-07
18Manufacturing Technology 1
University Science Press, NewDelhi 2004
19 Production Technology Eswar Press, Chennai – 17 2005
20 Solid and Fluid Mechanics Anuradha Publications,Chennai – 17
2007
21 Design of jigs, fixtures, and press tools Eswar Press, Chennai – 17 2003
The following are the referred text books in the various universities in India:
* Basic Civil and Mechanical Engineering - Anna University- Chennai.* Process planning and cost estimation - MIT campus, Anna University.*Manufacturing Technology - I - PSG College of Technology*Design of Jigs, Fixtures and Press tools - NIIT Kerala, Dr.MGR University*Engineering Metrology - PSG College of Technology*Principles of Management -MIT campus, Anna University* Power plant Engineering - JNTU ,Andhar Pradesh, Biju
Patnaik University, Orissa* Total Quality Management -Viswesvaraya Technical
University, Bangalore* Manufacturing Strategy -Maharastra Schowhan University,
Mumbai
22 Engineering Metrology Eswar Press, Chennai – 17 2004
23 Power Plant Engineering I.K. International Publishers,New Delhi
2006
24 Principles of Management Eswar Press, Chennai – 17. 2005
25 Process Planning and Cost Estimation New Age International 2004
26 Manufacturing Strategy Vikas Publications, Delhi 2007
27 Design of Machine Elements Eswar Press, Chennai – 17 2007
28 Production Planning and Control Anuradha Publications,Chennai – 17
2006-07
29 Engineering Graphics Scientific Publisher, Banglore 2006-08
30 Engineering Economics and CostAnalysis Anuradha Publications,
Chennai – 17
2007-08,
revised2012
31 Engineering Metrology andMeasurements
Other relevantinformation Period Place of
ResearchFundingAgency
Status
Two days Hands OnTraining IOT basedRobotics with Python
Application
July 2019
Sri SairamEngineeringCollege,
Chennai-44.
SairamManagement Completed
Two days Hands OnTraining on Artificial
2019 Sri SairamEngineering
SairamManagement Completed
Intelligence in Robotics College,
Chennai-44.
National Level TechnicalSymposium -
SAIMECH-05
August2007
Sri SairamEngineeringCollege,
Chennai-44.
SairamManagement Completed
International Conference –ICMMS-2016
2016
Sri SairamEngineeringCollege,
Chennai-44.
SairamManagement Completed
Faculty DevelopmentProgramme (FDP) -
RoboticsNovember
2019
Sri SairamEngineeringCollege,
Chennai-44.
ISTE Completed
Faculty DevelopmentProgramme (FDP) - TotalQuality Management
November2005
Sri SairamEngineeringCollege,
Chennai-44.
Anna University,Chennai Completed
GOOGLE SCHOLAR CITATION: 2141
H-index: 20
I10-index: 41
Declaration
I declare that the information furnished above is true and correct to the best of my knowledge andbelief, and that no related information is concealed. If any discrepancy is found at any stage, the collegeshall cancel my selection / candidature.
Signature of the Applicant
Place:
Date :
![Sep-Nov, 2018 Volume VI - Issue II MECH · [Type text] THE MECH NEWSLETTER Sep-Nov, 2018 Volume VI - Issue II Department of Mechanical Engineering The Department of Mechanical Engineering](https://static.fdocuments.net/doc/165x107/5e5f133ff7518516fd647968/sep-nov-2018-volume-vi-issue-ii-type-text-the-mech-newsletter-sep-nov-2018.jpg)
