Rescue tents brochure
-
Upload
bcb-international -
Category
Documents
-
view
235 -
download
0
description
Transcript of Rescue tents brochure
INFLATABLE RESCUE TENTS
■ Easy deployment within a few minutes after being connected to air supply
■ Inflatable with pressure air or electrical blower
■ Quick-coupling device to connect the pressure air supply
■ Safety relief valve
■ Inflatable structure with two-chambers
■ High air tightness and strength of the inflatable structure
■ Tent roof made from PVC coated fabric in white, yellow, orange, red, khaki green colours
■ Tent floor made from a high-strength material with antiskid treatment
■ Tent entrance is equipped with zip fasteners, at the floor there are reversible canvas fasteners with rings
■ Ground fastening flaps and guy ropes on support arches of the structure to secure the stability in all weathers, on a hard surface the tent can be anchored by means of weight bags filled with water or any other weight placed on the ground fastening flaps
■ On the structure inside the tent, there are fastening straps for lamps, devices and similar
■ Venting mesh over the entrance to ensure a natural air exchange
■ Side walls contain 2 closable openings with diameter 350 mm to connect heating, air condition
■ Side walls contain 2 closable openings with diameter 150 mm to connect electro installation cables, hoses
■ Anchor and repair set and hand pump are included
■ Packed in a transport bag
■ Ideal base during a rescue action
■ For short-term and long-term use in many areas – in case of events with an immediate need for hinterlands, for accommodation of people, material storage and similar.
■ Long lifetime with only minimum maintenance and repair required
■ Selection from many types, sizes and colours
■ Easy handling and operation
■ Service centre in the manufacturer´s plant
1
5
2
6
3 4
7 8
On request
■ Three-layers windows – roof material, film, net
■ Removable floor, i.e. attached by means of Velcro
■ Removable hygiene liner
■ Removable insulation liner
■ Lengthwise or crosswise partition curtains to divide the inner space
■ Connecting passages for connection of tents into bigger units and combinations, e.g. field hospitals
■ Connecting passage for connection between tent and container
■ Front shelter for container
■ Side (technical) entrance
■ Weight bags to be filled with water for anchoring the tent on a hard surface
Additional accessories:
- heating - air condition - additional solid floor - lamps etc.
Material used
■ Floor – PES textile double-sided PVC coating, high-strength, abrasion proof, water-proof, with anti-skid modification, surface weight approx. 520 g/m2
■ Inflatable frame – PAD fabric double-sided rubber mixture coating, high strength, abrasion resistant, air-proof
■ Internal partition curtain – PES fabric one-side PUR coating, water-proof
■ Isolating liner – Quilted material consisting of three layers: PES fabric, PES fleece and PES fabric resp. non-woven, surface weight approx. 250 g/m2
Roof:
■ PES fabric one-sided PVC coating, high-strength, water-proof, surface weight approx. 300 g/m2, or
■ PES fabric double-sided PVC coating, high-strength, water-proof, surface weight approx. 420 g/m2, or
■ PES fabric double-sided PVC coating, high-strength, water-proof, self extinguishing, surface weight approx. 700 g/m2
■ Internal partition curtain – PES fabric one-side PUR coating, water-proof.
■ Isolating liner – Quilted material consisting of three layers: PES fabric, PES fleece and PES fabric resp. non-woven, surface weight approx. 250 g/m2.
Fastening for lamps
Opening for heating
Venting mesh
Accessories for the tent
BCB International Ltd. Clydesmuir Road, Cardiff CF24 2QS UKTel: +44 (0)2920 433 700 Fax: +44 (0)2920 433 701 Email: [email protected] www.bcbin.com