Reportable HMDA Data: A regulatory and reporting … · 1 REPORTABLE HMDA DATA: A REGULATORY AND R...

Effective January 1, 2018

1 REPORTABLE HMDA DATA: A REGULATORY AND REPORTING OVERVIEW REFERENCE CHART – VERSION 1.2, 2/1/18

Reportable HMDA Data: A Regulatory and Reporting Overview Reference Charta This chart is intended to be used as a reference tool for data points required to be collected, recorded, and reported under Regulation C, as amended by the HMDA Rules issued on October 15, 2015 and on August 24, 2017. Relevant regulation and commentary sections are provided for ease of reference. The chart also incorporates the information found in Section 4.2.2 of the 2018 Filing Instructions Guide and provides when to report not applicable, including the code used for reporting not applicable from section 4 of the 2018 Filing Instructions Guide for ease of reference. This chart does not provide data fields or enumerations used in preparing the HMDA loan/application register (LAR). For more information on preparing the HMDA LAR, please see http://www.consumerfinance.gov/hmda.

Data point Regulation C references

Description Filing instructionsb Reporting “Not Applicable”c

(1) Legal Entity Identifier (LEI)

§ 1003.4(a)(1)(i)(A)

Identifier issued to the financial institution (FI) by a utility endorsed by the Global LEI Foundation or LEI Regulatory Oversight Committee

Enter your financial institution’s LEI. Example: If your institution’s LEI is 10Bx939c5543TqA1144M, enter 10Bx939c5543TqA1144M.

http://www.consumerfinance.gov/hmda

https://www.consumerfinance.gov/eregulations/1003-4/2017-18284_20180101#1003-4-a-1






(2) Universal Loan Identifier (ULI)

§ 1003.4(a)(1)(i), Comments 4(a)(1)(i)-1 through -5, and appendix C

Identifier assigned to identify and retrieve a loan or application that contains the FI’s LEI, an internally generated sequence of characters, and a check digit

1. Begins with the financial institution’s Legal Entity Identifier as defined in § 1003.4(a)(1)(i)(A).

2. Follows the Legal Entity Identifier with up to 23 additional characters to identify the covered loan or application, which:

May be letters, numerals, or a combination of letters and numerals;

Must be unique within the financial institution; and Must not include any information that could be used to directly

identify the applicant or borrower.

3. Ends with a two-character check digit that is calculated using the ISO/IEC 7064, MOD 97-10 as it appears on the International Standard ISO/IEC 7064:2003, which is published by the International Organization for Standardization (ISO). A check digit can be generated by:

Using the check digit tool. Information regarding the check digit tool will be located at http://www.consumerfinance.gov/hmda/for-filers; or

Applying the procedures provided in appendix C to Regulation C.

(3) Application Date

§ 1003.4(a)(1)(ii), Comments 4(a)(1)(ii)-1 through -3

Date the application was received or the date on the application form

Enter, in numeral form, the date the application was received or the date shown on the application form by year, month, and day, using YYYYMMDD format.

Example: If the application was received on July 21, 2018, enter

Enter “NA” for purchased covered loans, § 1003.4(a)(1)(ii)

Example: 10Bx939c5543TqA1144M999143X99 LEI Loan or Check Application Digit Identifier

https://www.consumerfinance.gov/eregulations/1003-4/2017-18284_20180101#1003-4-a-1-i

https://www.consumerfinance.gov/eregulations/1003-Subpart-Interp/2017-18284_20180101#1003-4-a-1-i-Interp-1



https://www.consumerfinance.gov/eregulations/1003-C/2017-18284_20180101#1003-C-1

https://www.consumerfinance.gov/eregulations/1003-4/2017-18284_20180101#1003-4-a-1-ii

https://www.consumerfinance.gov/eregulations/1003-Subpart-Interp/2017-18284_20180101#1003-4-a-1-ii-Interp-1







20180721.

(4) Loan Type § 1003.4(a)(2), Comment 4(a)(2)-1

Whether the loan or application is insured by the Federal Housing Administration, guaranteed by the Department of Veterans Affairs, Rural Housing Service, or Farm Service Agency

Indicate the type of covered loan or application by entering: Code 1—Conventional (not insured or guaranteed by FHA, VA,

RHS, or FSA) Code 2—Federal Housing Administration insured (FHA) Code 3—Veterans Affairs guaranteed (VA) Code 4—USDA Rural Housing Service or Farm Service Agency

guaranteed (RHS or FSA)

(5) Loan Purpose

§ 1003.4(a)(3), Comments 4(a)(3)-1 through -6

Whether the transaction is for home purchase, home improvement, refinancing, cash-out refinancing, or another purpose

Indicate the purpose of the covered loan or application by entering: Code 1—Home purchase Code 2—Home improvement Code 31—Refinancing Code 32—Cash-out refinancing Code 4—Other purpose Code 5—Not applicable

To report not applicable, enter “Code 5” for purchased covered loans where origination took place prior to January 1, 2018, Comment 4(a)(3)-6.

(6) Preapproval § 1003.4(a)(4), Comments 4(a)(4)-1 and -2

Whether the transaction involved a preapproval request for a home purchase loan under a preapproval program

Indicate preapproval for a covered loan or application by entering: Code 1—Preapproval requested Code 2—Preapproval not requested

(7) Construction § 1003.4(a)(5), Whether the dwelling is Indicate the construction method for the dwelling by entering:


https://www.consumerfinance.gov/eregulations/1003-Subpart-Interp/2017-18284_20180101#1003-4-a-2-Interp-1













Method Comments 4(a)(5)-1 through -3

site-built or a manufactured home

Code 1—Site-built Code 2—Manufactured home

(8) Occupancy Type


Whether the property will be used as a principal residence, second residence, or investment property

Indicate the occupancy type by entering: Code 1—Principal residence Code 2—Second residence Code 3—Investment property

(9) Loan Amount


Amount of the loan or the amount applied for

Enter, in dollars, the amount of the covered loan, or the amount applied for, as applicable.

Example: If the loan amount is $110,500, enter 110500 or 110500.00. If the loan amount is $110,500.24, enter 110500.24.

(10) Action Taken and (11) Action Taken Date

§ 1003.4(a)(8), Comments 4(a)(8)(i)-1 through -14 and 4(a)(8)(ii)-1 through -6

Type and date of action the FI took on the loan, application, or preapproval request

ACTION TAKEN. Indicate the action taken on the covered loan or application by entering: Code 1—Loan originated Code 2—Application approved but not accepted Code 3—Application denied Code 4—Application withdrawn by applicant Code 5—File closed for incompleteness Code 6—Purchased loan Code 7—Preapproval request denied Code 8—Preapproval request approved but not accepted

ACTION TAKEN DATE. Enter, in numeral form, the date of action taken by year, month, and day, using YYYYMMDD format.

Example: If the action taken date is July 21, 2018, enter 20180721.






















(12) Property Address

§ 1003.4(a)(9)(i), Comments 4(a)(9)-1 through -5 and 4(a)(9)(i)-1 through -3

Address of the property securing the loan (or proposed to secure a loan)

STREET ADDRESS. Enter the street address of the property as one (1) data field. U.S. Postal Service Publication 28, Sub-Sections 231-239 can be used as a guide for formatting the street address to help improve geocoding accuracy. Address components include, as applicable, the following individual items: Primary Address Number Predirectional Street Name Prefix Suffix Postdirectional Secondary Address Identifier, such as apartment Secondary Address, such as apartment number CITY. Enter the city of the property as one (1) data field. STATE. Enter the two letter state code of the property as one (1) data field. ZIP CODE. Enter the ZIP code of the property as one (1) data field. NON-STANDARD ADDRESSING. U.S. Postal Service Publication 28, Sub-Section 24, 25 and 29, respectively, can be used as guides for formatting non-standard style addressing including rural route, Highway Contract Route, and Puerto Rico addresses to increase the accuracy for geocoding. The following address formats are generally not preferred: General Delivery addresses, such as General Delivery, Anytown,

CA 90049-9998. Post Office Box addresses, such as P.O. Box 100 Anytown, CA

Enter “NA” in each of the property address fields for: Covered loans or applications if the property

address of the property securing the covered loan is not known (e.g., the property did not have a property address at closing, or the property address was not provided to the institution before the application was denied, withdrawn, or closed for incompleteness), Comment 4(a)(9)(i)-3;

Covered loans or applications if a site of a manufactured home has not been identified, Comment 4(a)(9)-5

STATE ONLY: For transactions for which State reporting is not required under § 1003.4(a)(9)(i), a financial institution may not report not applicable for the PropertyAddress State unless the institution is permitted to report not applicable for State for Property Location. See below for when you may report not applicable for Property Location.

https://www.consumerfinance.gov/eregulations/1003-4/2017-18284_20180101#1003-4-a-9-i









90049-9998. Spelled-out numbers, such as Four Hundred Fifty Six W

Somewhere Ave Apt Two Hundred One.

(13), (14), and (15) Property Location

§ 1003.4(a)(9)(ii), Comments 4(a)(9)-1 through -5, 4(a)(9)(ii)-1, 4(a)(9)(ii)(A)-1, 4(a)(9)(ii)(B)-1 and -2, and 4(a)(9)(ii)(C)-1 and -2

Location of the property securing the loan (or proposed to secure a loan) by state, county, and census tract

COUNTY. Enter the five digit Federal Information Processing Standards (FIPS) numerical code for the county. Do not use commas.

Example: Enter 06037 for the FIPS code for Los Angeles County, CA.

CENSUS TRACT. Enter the 11 digit census tract number as defined by the U.S. Census Bureau. Do not use decimals.

Example: Enter 06037264000 for a census tract within Los Angeles County, CA.

STATE. Enter the two letter state code of the property as one (1) data field.

Enter “NA” for: Applications only if the state, county, or

census tract in which the property is located is not known before the application is denied, withdrawn, or closed for incompleteness, Comments 4(a)(9)(ii)(A)-1, 4(a)(9)(ii)(B)-2, and 4(a)(9)(ii)(C)-2.

Covered loans or applications if a site of a manufactured home has not been identified, Comment 4(a)(9)-5;

Covered loans or applications if the property is not located in an Metropolitan Statistical Area (MSA) or Metropolitan Division (MD) in which the institution has a home or branch office and the institution is not required to report data on small business, small farm, and community development lending under regulations that implement the Community Reinvestment Act of 1977, § 1003.4(a)(9)(ii) and § 1003.4(e)

CENSUS TRACT ONLY: Covered loans or applications if the property is located in a county with a population of 30,000 or less according to the most recent decennial census conducted by the U.S. Census Bureau, §





https://www.consumerfinance.gov/eregulations/1003-Subpart-Interp/2017-18284_20180101#1003-4-a-9-ii-A-Interp-1

https://www.consumerfinance.gov/eregulations/1003-Subpart-Interp/2017-18284_20180101#1003-4-a-9-ii-B-Interp-1

https://www.consumerfinance.gov/eregulations/1003-Subpart-Interp/2017-18284_20180101#1003-4-a-9-ii-B-Interp-2

https://www.consumerfinance.gov/eregulations/1003-Subpart-Interp/2017-18284_20180101#1003-4-a-9-ii-C-Interp-1

https://www.consumerfinance.gov/eregulations/1003-Subpart-Interp/2017-18284_20180101#1003-4-a-9-ii-C-Interp-2





1003.4(a)(9)(ii)(C)

NOTE: For transactions for which State, county, or census tract reporting is not required under § 1003.4(a)(9)(ii) or § 1003.4(e), financial institutions may report that the requirement is not applicable, or they may voluntarily report the State, county, or census tract information, Comment 4(a)(9)(ii)-1 STATE ONLY: For transactions for which State reporting is not required under § 1003.4(a)(9)(ii), a financial institution may not report not applicable for the Property Location State unless the institution is permitted to report not applicable for Property Address. See above for when you may report not applicable for Property Address.

(16) Ethnicity, § 1003.4(a)(10)(i), Comments 4(a)(10)(i)-1 and -2 and appendix B

Applicant’s or borrower’s ethnicity, race, and sex, and if information was collected by visual observation or surname

ETHNICITY OF APPLICANT OR BORROWER. Indicate the ethnicity of the applicant or borrower, or of the first co-applicant or co-borrower, as applicable, by entering up to five (5): Code 1—Hispanic or Latino

o Code 11—Mexican o Code 12—Puerto Rican o Code 13—Cuban o Code 14—Other Hispanic or Latino

NOTE: If the applicant or borrower, or any co-applicant or co-borrower, did not select Code 14, but provided an other Hispanic

To report not applicable, enter “Code 4” for Ethnicity of Applicant or Borrower and “Code 3” for Ethnicity Collected on the Basis of Visual Observation or Surname for: Purchased covered loans for which the

financial institution chooses not to report the applicant’s or co-applicant’s ethnicity, race, and sex, appendix B;

Covered loans or applications when applicant or co-applicant is not a natural person,





https://www.consumerfinance.gov/eregulations/1003-B/2017-18284_20180101#1003-B-1






or Latino ethnicity(ies) in the Ethnicity Free Form Text Field for Other Hispanic or Latino, your institution is permitted, but not required, to report Code 14 in one of the Ethnicity of Applicant or Borrower data fields. This will be counted as one of the five (5) reported ethnicities, whether or not you also choose to report Code 14 as one of the Ethnicity of Applicant or Borrower, or Ethnicity of Co-Applicant or Co-Borrower, data fields. See below for information about the Ethnicity Free Form Text Field for Other Hispanic or Latino.

Code 2—Not Hispanic or Latino Code 3—Information not provided by applicant in mail, internet, or

telephone application NOTE: Use Code 3 if the applicant or borrower, or co-applicant or co-borrower does not provide the information in an application taken by mail, internet, or telephone. Leave the remaining Ethnicity of Applicant or Borrower data fields blank.

Code 4—Not applicable NOTE: Use Code 4 if the requirement to report the applicant’s or borrower’s ethnicity does not apply to the covered loan or application that your institution is reporting. Leave the remaining Ethnicity of Applicant or Borrower data fields blank.

Code 5—No co-applicant NOTE: Use Code 5 in the co-applicant field if there are no co-applicants or co-borrowers. Leave the remaining Ethnicity of Applicant or Borrower data fields blank.

If there is more than one co-applicant or co-borrower, provide the required information only for the first co-applicant or co-borrower listed on the collection form.

appendix B

NOTE: Use Code 3 if the financial institution received the application prior to January 1st, 2018, and the financial institution chooses not to report whether the ethnicity of the applicant or borrower, or of the first co-applicant or co-borrower, as applicable, was collected on the basis of visual observation or surname.





Do not enter the same code more than once for the applicant or borrower, or any co-applicant or co-borrower, as applicable, for any covered loan or application. If fewer than five (5) ethnicities are provided by the applicant or borrower, or by any co-applicant or co-borrower, leave the remaining Ethnicity of Applicant or Borrower data fields blank. ETHNICITY FREE FORM TEXT FIELD. Enter the specific other Hispanic or Latino ethnicity(ies) not listed above, if provided by the applicant or borrower, or by any co-applicant or co-borrower, as applicable. For example, enter Argentinean, Colombian, Dominican, Nicaraguan, Salvadoran, or Spaniard, and so on, if provided by the applicant or borrower, or by any co-applicant or co-borrower, as applicable. Enter more than one other Hispanic or Latino ethnicity, if provided by the applicant or borrower, or by any co-applicant or co-borrower, as applicable. The maximum number of characters for this field is 100 characters, including spaces. If the applicant or borrower, or any co-applicant or co-borrower, did not provide an other Hispanic or Latino ethnicity(ies), leave this field blank.

ETHNICITY COLLECTED ON THE BASIS OF VISUAL OBSERVATION OR SURNAME. Indicate whether the ethnicity of the applicant or borrower, or of the first co-applicant or co-borrower, as applicable, was collected on the basis of visual observation or surname by entering: Code 1—Collected on the basis of visual observation or surname Code 2—Not collected on the basis of visual observation or





surname Code 3—Not applicable

NOTE: Use Code 3 if the requirement to report the applicant’s or borrower’s ethnicity does not apply to the covered loan or application that your institution is reporting.

Code 4—No co-applicant NOTE: Use Code 4 in the co-applicant field if there are no co-applicants or co-borrowers


(17) Race § 1003.4(a)(10)(i), Comments 4(a)(10)(i)-1 and -2 and appendix B


RACE OF APPLICANT OR BORROWER. Indicate the race of the applicant or borrower, or of the first co-applicant or co-borrower, as applicable, by entering up to five (5): Code 1—American Indian or Alaska Native

NOTE: If the applicant or borrower, or any co-applicant or co-borrower, did not select Code 1, but provided the name of the applicant’s or borrower’s American Indian or Alaska Native Enrolled or Principal Tribe(s) in the Race Free Form Text Field for American Indian or Alaska Native Enrolled or Principal Tribe, your institution is permitted, but not required, to report Code 1 in one of the Race of Applicant or Borrower data fields. Each reported race will be counted as one of the five (5) reported races, whether or not you also choose to report Code 1 as one of the Race of Applicant or Borrower, or Race of Co-Applicant or Co-Borrower, data fields. See below for information about the Race Free Form Text Field for American Indian or

To report not applicable, enter “Code 7” for Race of Applicant or Borrower and “Code 3” for Race Collected On The Basis Of Visual Observation Or Surname for: Purchased covered loans for which the


Covered loans or applications when applicant or co-applicant is not a natural person, appendix B

NOTE: Use Code 3 if the financial institution received the application prior to January 1st, 2018, and the financial institution chooses not to report whether the race of the applicant or borrower, or of the first co-applicant or co-












Alaska Native Enrolled or Principal Tribe. Code 2—Asian

o Code 21—Asian Indian o Code 22—Chinese o Code 23—Filipino o Code 24—Japanese o Code 25—Korean o Code 26—Vietnamese o Code 27—Other Asian

NOTE: If the applicant or borrower, or any co-applicant or co-borrower, did not select Code 27, but provided the name of the applicant’s or borrower’s other Asian race(s) in the Race Free Form Text Field for Other Asian, your institution is permitted, but not required, to report Code 27 in one of the Race of Applicant or Borrower data fields. Each reported race will be counted as one of the five (5) reported races, whether or not you also choose to report Code 27 as one of the Race of Applicant or Borrower, or Race of Co-Applicant or Co-Borrower, data fields. See below for information about the Race Free Form Text Field for Other Asian.

Code 3—Black or African American Code 4—Native Hawaiian or Other Pacific Islander

o Code 41—Native Hawaiian o Code 42—Guamanian or Chamorro o Code 43—Samoan o Code 44—Other Pacific Islander

NOTE: If the applicant or borrower, or any co-applicant or co-borrower, did not select Code 44, but provided the name

borrower, as applicable, was collected on the basis of visual observation or surname.





of the applicant’s or borrower’s other Pacific Islander race(s) in the Race Free Form Text Field for Other Pacific Islander, your institution is permitted, but not required, to report Code 44 in one of the Race of Applicant or Borrower data fields. Each reported race will be counted as one of the five (5) reported races, whether or not you also choose to report Code 44 as one of the Race of Applicant or Borrower, or Race of Co-Applicant or Co-Borrower, data fields. See below for information about the Race Free Form Text Field for Other Pacific Islander.

Code 5—White Code 6—Information not provided by applicant in mail, internet, or

telephone application NOTE: Use Code 6 if the applicant or borrower, or co-applicant or co-borrower does not provide the information in an application taken by mail, internet, or telephone. Leave the remaining Race of Applicant or Borrower data fields blank.

Code 7—Not applicable NOTE: Use Code 7 if the requirement to report the applicant’s or borrower’s race does not apply to the covered loan or application that your institution is reporting. Leave the remaining Race of Applicant or Borrower data fields blank.

Code 8—No co-applicant NOTE: Use Code 8 in the co-applicant field if there are no co-applicants or co-borrowers. Leave the remaining Race of Applicant or Borrower data fields blank.

Do not enter the same code more than once for the applicant or borrower, or any co-applicant or co-borrower, as applicable, for any





covered loan or application. If fewer than five (5) races are provided by the applicant or borrower, or by any co-applicant or co-borrower, leave the remaining Race of Applicant or Borrower data fields blank. RACE FREE FORM TEXT FIELDS. RACE FREE FORM TEXT FIELD FOR AMERICAN INDIAN OR

ALASKAN NATIVE ENROLLED OR PRINCIPAL TRIBE. Enter the name of the applicant’s or borrower’s American Indian or Alaska Native enrolled or Principal Tribe(s), if provided by the applicant or borrower, or by any co-applicant or co-borrower, as applicable in the Race Free Form Text Field for American Indian or Alaskan Native Enrolled or Principal Tribe. For example, enter Navajo if provided by the applicant or borrower, or by any co-applicant or co-borrower, as applicable. Enter more than one American Indian or Alaska Native Enrolled or Principal Tribe, if provided by the applicant or borrower, or by any co-applicant or co-borrower, as applicable. The maximum number of characters for this field is 100 characters, including spaces. If the applicant or borrower, or any co-applicant or co-borrower did not provide an American Indian or Alaska Native Enrolled or Principal Tribe(s), leave the Race Free Form Text Field for American Indian or Alaska Native Enrolled or Principal Tribe field blank.

RACE FREE FORM TEXT FIELD FOR OTHER ASIAN. Enter the specific other Asian race(s) not listed above, if provided by the applicant or borrower, or by any co-applicant or co-borrower, as applicable in the Race Free Form Text Field for Other Asian. For example, enter Hmong, Laotian, Thai, Pakistani, or





Cambodian, and so on, if provided by the applicant or borrower, or by any co-applicant or co-borrower, as applicable. Enter more than one other Asian race, if provided by the applicant or borrower, or by any co-applicant or co-borrower, as applicable. The maximum number of characters for this field is 100 characters, including spaces. If the applicant or borrower, or any co-applicant or co-borrower, did not provide an other Asian race(s), leave the Race Free Form Text Field for Other Asian field blank.

RACE FREE FORM TEXT FIELD FOR OTHER PACIFIC ISLANDER. Enter the specific Other Pacific Islander race(s) not listed above, if provided by the applicant or borrower, or by any co-applicant or co-borrower, as applicable in the Race Free Form Text Field for Other Pacific Islander. For example, enter Fijian, or Tongan, and so on, if provided by the applicant or borrower, or by any co-applicant or co-borrower, as applicable. Enter more than one Other Pacific Islander race, if provided by the applicant or borrower, or by any co-applicant or co-borrower, as applicable. The maximum number of characters for this field is 100 characters, including spaces. If the applicant or borrower, or any co-applicant or co-borrower, did not provide an Other Pacific Islander race(s), leave the Race Free Form Text Field for Other Pacific Islander field blank.

RACE COLLECTED ON THE BASIS OF VISUAL OBSERVATION OR SURNAME. Indicate whether the race of the applicant or borrower, or of the first co-applicant or co-borrower, as applicable, was collected on the basis of visual observation or surname by entering: Code 1—Collected on the basis of visual observation or surname Code 2—Not collected on the basis of visual observation or






NOTE: Use Code 3 if the requirement to report the applicant’s or borrower’s race does not apply to the covered loan or application that your institution is reporting.

Code 4—No co-applicant NOTE: Use Code 4 in the co-applicant field if there are no co-applicants or co-borrowers.


(18) Sex § 1003.4(a)(10)(i), Comments 4(a)(10)(i)-1 and -2 and appendix B


SEX OF APPLICANT OR BORROWER. Indicate the sex of the applicant or borrower, or of the first co-applicant or co-borrower, as applicable, by entering: Code 1—Male Code 2—Female Code 3—Information not provided by applicant in mail, internet, or

telephone application NOTE: Use Code 3 if the applicant or co-applicant does not provide the information in an application taken by mail, internet, or telephone.

Code 4—Not applicable NOTE: Use Code 4 if the requirement to report the applicant’s or borrower’s sex does not apply to the covered loan or application that your institution is reporting.

Code 5—No co-applicant NOTE: Use Code 5 in the co-applicant field if there are no co-

To report not applicable, enter “Code 4” for Sex of Applicant or Borrower and “Code 3” for Sex Collected on the Basis of Visual Observation or Surname for: Purchased covered loans for which the


Covered loans or applications when applicant or co-applicant is not a natural person, appendix B

NOTE: Use Code 3 if the financial institution received the application prior to January 1st, 2018, and the financial institution chooses not to report whether the sex of the applicant or borrower, or of the first co-applicant or co-












applicants or co-borrowers. Code 6—Applicant selected both male and female

NOTE: Use Code 6 if the applicant or co-applicant selected both male and female.


SEX COLLECTED ON THE BASIS OF VISUAL OBSERVATION OR SURNAME. Indicate whether the sex of the applicant or borrower, or of the first co-applicant or co-borrower, as applicable, was collected on the basis of visual observation or surname by entering: Code 1—Collected on the basis of visual observation or surname Code 2—Not collected on the basis of visual observation or


NOTE: Use Code 3 if the requirement to report the applicant’s or borrower’s sex does not apply to the covered loan or application that your institution is reporting.

Code 4—No co-applicant NOTE: Use Code 4 in the co-applicant field if there are no co-applicants or co-borrowers.


borrower, as applicable, was collected on the basis of visual observation or surname.

(19) Age § 1003.4(a)(10)(ii Applicant’s or Enter, in numeral form, the age, in years, of the applicant or borrower, To report not applicable, enter “Code 8888” for:






), Comments 4(a)(10)(ii)-1 through -5

borrower’s age or of the first co-applicant or co-borrower, as applicable. Age is calculated, as of the application date, as the number of whole years derived from the date of birth shown on the application form.

Example: If the applicant or borrower is 24 years old, enter 24. Or, enter: Code 8888—Not applicable Code 9999—No co-applicant

NOTE: Use Code 9999 in the co-applicant field if there are no co-applicants or co-borrowers.


Purchased covered loans for which the financial institution chooses not to report the applicant’s or co-applicant’s age, Comment 4(a)(10)(ii)-3;

Covered loans or applications when applicant or co-applicant is not a natural person, Comment 4(a)(10)(ii)-4

(20) Income § 1003.4(a)(10)(iii), Comments 4(a)(10)(iii)-1 through -10

If credit decision is made, gross annual income relied on in making the credit decision; Or, if a credit decision was not made, the gross annual income relied on in processing the application

Enter, in dollars, the gross annual income relied on in making the credit decision, or if a credit decision was not made, the gross annual income relied on in processing the application. Round all dollar amounts to the nearest thousand (round $500 up to the next $1,000).

Example: If the income amount is $35,500, enter 36.

Enter “NA” for: Covered loans or applications for which the

credit decision did not consider, or would not have considered income, § 1003.4(a)(10)(iii); Comment 4(a)(10)(iii)-6;

Covered loans or applications when applicant or co-applicant is not a natural person, Comment 4(a)(10)(iii)-7;

Covered loan is secured by, or application is proposed to be secured by, a multifamily dwelling, Comment 4(a)(10)(iii)-8;

Purchased covered loans for which the financial institution chooses not to report the




https://www.consumerfinance.gov/eregulations/1003-4/2017-18284_20180101#1003-4-a-10-iii

https://www.consumerfinance.gov/eregulations/1003-4/2017-18284_20180101#1003-4-a-10-iii

https://www.consumerfinance.gov/eregulations/1003-Subpart-Interp/2017-18284_20180101#1003-4-a-10-iii-Interp-1

https://www.consumerfinance.gov/eregulations/1003-Subpart-Interp/2017-18284_20180101#1003-4-a-10-iii-Interp-10





income, Comment 4(a)(10)(iii)-9; Covered loan to, or an application from, the

institution’s employees to protect their privacy, even if the institution relied on their income in making the credit decision, Comment 4(a)(10)(iii)-3

(21) Type of Purchaser


Type of entity that purchased the loan

Indicate the type of entity purchasing a covered loan from your institution within the same calendar year that your institution originated or purchased the loan by entering: Code 0—Not applicable Code 1—Fannie Mae Code 2—Ginnie Mae Code 3—Freddie Mac Code 4—Farmer Mac Code 5—Private securitizer Code 6—Commercial bank, savings bank, or savings association Code 71—Credit union, mortgage company, or finance company Code 72—Life insurance company Code 8—Affiliate institution Code 9—Other type of purchaser

To report not applicable, enter “Code 0” for: Applications that were denied, withdrawn,

closed for incompleteness, or approved but not accepted by the applicant, Comment 4(a)(11)-10;

Preapproval requests that were denied or approved but not accepted by the applicant, Comment 4(a)(11)-10;

Originated or purchased covered loans that the financial institution did not sell during that same calendar year, Comment 4(a)(11)-10

(22) Rate Spread


Difference between the annual percentage rate and average prime offer rate for a comparable transaction

Enter, as a percentage, to at least three (3) decimal places, the difference between the covered loan’s annual percentage rate (APR) and the average prime offer rate (APOR) for a comparable transaction as of the date the interest rate is set. Numbers calculated to beyond three (3) decimal places may either be reported beyond three (3) decimal places or rounded or truncated to

Enter “NA” for: Covered loans that are assumptions, reverse

mortgages, purchased loans, or are not subject to Regulation Z, § 1003.4(a)(12)(i); Comment 4(a)(12)-7;

Applications that did not result in an origination other than approved but not accepted,











three (3) decimal places. Decimal place trailing zeros may either be included or omitted. If the APR exceeds the APOR, enter a positive number.

Example: If the APR is 3.678% and the APOR is 3.25%, enter 0.428. If the APR is 4.560% and the APOR is 4.25%, enter either 0.31 or 0.310

If the APR is less than the APOR, enter a negative number. Example: If the APR 3.1235% and the APOR is 3.25%, enter -0.1265. Alternatively, the rate spread may be truncated to -0.126 or rounded to -0.127.

Comment 4(a)(12)-7 Applications approved but not accepted, if no

disclosures under Regulation Z are required, Comment 4(a)(12)-8

(23) HOEPA Status

§ 1003.4(a)(13), Comment 4(a)(13)-1

Whether the loan is a high-cost mortgage under the Home Ownership and Equity Protection Act (HOEPA)

Indicate whether the covered loan is a high-cost mortgage under Regulation Z, § 1026.32(a) by entering: Code 1—High-cost mortgage Code 2—Not a high-cost mortgage Code 3—Not applicable

To report not applicable, enter “Code 3” for: Covered loans not subject to the Home

Ownership and Equity Protection Act (HOEPA) of 1994, as implemented in Regulation Z, § 1026.32(a), § 1003.4(a)(13); Comment 4(a)(13)-1

Applications that did not result in originations, Comment 4(a)(13)-1

(24) Lien Status § 1003.4(a)(14), Comments 4(a)(14)-1 and -2

Whether the property is a first or subordinate lien

Indicate the lien status of the property securing the covered loan, or in the case of an application, proposed to secure the covered loan, by entering: Code 1—Secured by a first lien Code 2—Secured by a subordinate lien

(25) Credit Score

§ 1003.4(a)(15), Comments 4(a)(15)-1

Credit score(s) relied on and the name and version of the credit

CREDIT SCORE OF APPLICANT OR BORROWER. Enter, in numeral form, the credit score, or scores relied on in making the credit decision for the applicant or borrower, or of the first co-applicant or co-borrower,

To report not applicable, enter “Code 8888” for Credit Score of Applicant or Borrower or “Code 9” for Name and Version of Credit Scoring












through -7 scoring model as applicable. If Regulation C requires your institution to report a single score that corresponds to multiple applicants or borrowers, report the score in either the applicant field or the co-applicant field. Or, enter Code 7777—Credit score is not a number Code 8888—Not applicable Code 9999—No co-applicant


NOTE: If Regulation C requires your institution to report a single score that corresponds to multiple applicants or borrowers, either report the credit score in the applicant field, and use Code 8888 in the co-applicant field; or report the credit score in the co-applicant field and use Code 8888 in the applicant field.

NAME AND VERSION OF CREDIT SCORING MODEL. Indicate the name and version of the credit scoring model used to generate the credit score, or scores, relied on in making the credit decision by entering: Code 1—Equifax Beacon 5.0 Code 2—Experian Fair Isaac Code 3—FICO Risk Score Classic 04 Code 4—FICO Risk Score Classic 98 Code 5—VantageScore 2.0 Code 6—VantageScore 3.0 Code 7—More than one credit scoring model Code 8—Other credit scoring model

Model for: Purchased covered loans, § 1003.4(a)(15)(i);

Comment 4(a)(15)-6; Transactions for which no credit decision was

made (e.g., files closed for incompleteness, or if an application was withdrawn before a credit decision was made), Comment 4(a)(15)-4;

Transactions for which the credit decision was made without relying on a credit score, Comment 4(a)(15)-5;

Covered loans or applications when applicant and co-applicant are not natural persons, Comment 4(a)(15)-7






NOTE: If Code 8 is selected in the Name and Version of Credit Scoring Model Field, enter the specific other credit scoring model that is not listed above in the Name and Version of Credit Scoring Model Conditional Free Form Text Field for Code 8. If Code 8 is not entered, leave this field blank.

Code 9—Not applicable Code 10—No co-applicant


NOTE: If Regulation C requires your institution to report a single score that corresponds to multiple applicants or borrowers, either report the name and version of the credit scoring model in the applicant field, and use Code 9 in the co-applicant field; or report the name and version of the credit scoring model in the co-applicant field and use Code 9 in the applicant field.

(26) Reason for Denial


Reason(s) the application was denied

Indicate the principal reason, or reasons, for denial by entering up to four (4): Code 1—Debt-to-income ratio Code 2—Employment history Code 3—Credit history Code 4—Collateral Code 5—Insufficient cash (downpayment, closing costs) Code 6—Unverifiable information Code 7—Credit application incomplete Code 8—Mortgage insurance denied Code 9—Other

To report not applicable, enter “Code 10” for applications that were not denied (e.g., loan is originated or purchased by the financial institution), Comment 4(a)(16)-4








NOTE: If Code 9 is selected in any Reason for Denial field, enter the specific other reason(s) for denial not listed above in the Reason for Denial Conditional Free Form Text Field for Code 9. See below for more information on the Reason for Denial Conditional Free Form Text Field for Code 9.

Code 10—Not applicable NOTE: Use Code 10 if the requirement to report reasons for denial does not apply to the covered loan or application that your institution is reporting. Leave the remaining Reason for Denial data fields blank.

Do not enter the same code more than once for any covered loan or application. If there are fewer than four principal (4) reasons for denial, leave the remaining Reason for Denial data fields blank. MODEL FORM. If your institution uses the model form contained in appendix C to Regulation B, 12 CFR part 1002 (Form C–1, Sample Notice of Action Taken and Statement of Reasons), use the following: Code 1—Income insufficient for amount of credit requested, and

Excessive obligations in relation to income Code 2—Temporary or irregular employment, and Length of

employment Code 3—Insufficient number of credit references provided;

Unacceptable type of credit references provided; No credit file; Limited credit experience; Poor credit performance with us; Delinquent past or present credit obligations with others; Number





of recent inquiries on credit bureau report; Garnishment, attachment, foreclosure, repossession, collection action, or judgment; and Bankruptcy

Code 4—Value or type of collateral not sufficient Code 6—Unable to verify credit references; Unable to verify

employment; Unable to verify income; and Unable to verify residence

Code 7—Credit application incomplete Code 9—Length of residence; Temporary residence; and Other

reasons specified on the adverse action notice. REASON FOR DENIAL CONDITIONAL FREE FORM TEXT FIELD FOR CODE 9. The maximum number of characters for this field is 255 characters, including spaces. If Code 9 is not entered, leave this field blank.

(27) Total Loan Costs or Total Points and Fees

§ 1003.4(a)(17), Comments 4(a)(17)(i)-1 through -3 and 4(a)(17)(ii)-1 through -2

Either total loan costs, or total points and fees charged

Enter either Total Loan Costs or Total Points and Fees: TOTAL LOAN COSTS. Enter, in dollars, the amount of total loan

costs. If the amount is zero, enter 0. TOTAL POINTS AND FEES. Enter, in dollars, the total points and

fees charged in connection with the covered loan. If the amount is zero, enter 0.

Example: If the total loan costs or the total points and fees are $2,399.04, enter 2399.04.

Enter “NA” for:

TOTAL LOAN COSTS. Applications, Comment 4(a)(17)(i)-1; Covered loans that are not subject to

Regulation Z, § 1026.43(c), § 1003.4(a)(17); Covered loans subject to Regulation Z § 1026.43(c) for which a disclosure is not provided pursuant to § 1026.19(f), § 1003.4(a)(17)

Purchased covered loans for which applications were received by the selling entity prior to the effective date of Regulation Z, § 1026.19(f), Comment 4(a)(17)(i)-2










TOTAL POINTS AND FEES. Applications, Comment 4(a)(17)(ii)-1; Covered loans that are not subject to

Regulation Z, § 1026.43(c), Comment 4(a)(17)(ii)-1;

Covered loans subject to Regulation Z, § 1026.43(c) for which a disclosure is provided pursuant to Regulation Z, § 1026.19(f), § 1003.4(a)(17)(ii);

Purchased covered loans, Comment 4(a)(17)(ii)-1

(28) Origination Charges


Total borrower-paid origination charges

Enter, in dollars, the total of all itemized amounts that are designated borrower-paid at or before closing. If the total is zero, enter 0.

Example: If the origination charges are $2,399.04, enter 2399.04.

Enter “NA” for: Applications, Comment 4(a)(18)-1; Covered loans not subject to Regulation Z, §

1026.19(f), § 1003.4(a)(18); Comment 4(a)(18)-1;

Purchased covered loans with applications that were received by the selling entity prior to the effective date of Regulation Z, § 1026.19(f), Comment 4(a)(18)-2

(29) Discount Points


Points paid to the creditor to reduce the interest rate

Enter, in dollars, the points paid to the creditor to reduce the interest rate. If no points were paid, leave this field blank.

Example: If the amount paid for discount points is $2,399.04, enter 2399.04.


1026.19(f), § 1003.4(a)(19); Comment 4(a)(19)-1;

Purchased covered loans with applications that were received by the selling entity prior to the











effective date ofRegulation Z, § 1026.19(f), Comment 4(a)(19)-2

(30) Lender Credits


Amount of lender credits

Enter, in dollars, the amount of lender credits. If no lender credits were provided, leave this field blank.

Example: If the amount is $1500.24, enter 1500.24.


1026.19(f), § 1003.4(a)(20); Comment 4(a)(20)-1;

Purchased covered loans with applications that were received by the selling entity prior to the effective date of Regulation Z, § 1026.19(f), Comment 4(a)(20)-2

(31) Interest Rate


Interest rate on the approved application or loan

Enter, as a percentage, to at least three (3) decimal places, the interest rate. Numbers calculated to beyond three (3) decimal places may either be reported beyond three (3) decimal places or rounded or truncated to three (3) decimal places. Decimal place trailing zeros may be either included or omitted.

Example: If the interest rate is 4.125%, enter 4.125. If the interest rate is exactly 4.500%, enter 4.5, 4.50, or 4.500.

Enter “NA” for applications that have been denied, withdrawn, or closed for incompleteness, Comment 4(a)(21)-2

(32) Prepayment Penalty Term


Term in months of any prepayment penalty

Enter, in numeral form, the term, in months, of any prepayment penalty. Example: If a prepayment penalty may be imposed within the first 24 months after closing or account opening, enter 24.

Enter “NA” for: Covered loans or applications that are not

subject to Regulation Z, § 1026, § 1003.4(a)(22); Comment 4(a)(22)-1;

Covered loans or applications that have no prepayment penalty, Comment 4(a)(22)-2














(33) Debt-to-Income Ratio


Ratio of the applicant’s or borrower’s total monthly debt to total monthly income relied on

Enter, as a percentage, the ratio of the applicant’s or borrower’s total monthly debt to the total monthly income relied on in making the credit decision. Use decimal places only if the ratio relied upon uses decimal places.

Example: If the relied upon debt-to-income ratio is 42.95, enter 42.95, and not 43. If, however, your institution rounded the ratio up to 43% and relied on the rounded-up number, enter 43.

Enter “NA” for: Purchased covered loans, § 1003.4(a)(23);



Transactions for which the credit decision was made without relying on debt-to-income ratio, Comment 4(a)(23)-4;

Covered loans or applications when applicant and co-applicant are not natural persons, Comment 4(a)(23)-5;

Covered loan secured by, or an application proposed to be secured by, a multifamily dwelling, Comment 4(a)(23)-6

(34) Combined Loan-to-Value Ratio


Ratio of the total amount of debt that is secured by the property to the value of the property that was relied on

Enter, as a percentage, the ratio of the total amount of debt secured by the property to the value of the property relied on in making the credit decision. Use decimal places only if the ratio relied upon uses decimal places.

Example: If the relied upon combined loan-to-value ratio is 80.05, enter 80.05, and not 80. If, however, your institution rounded the ratio down to 80 and relied on the rounded-down number, enter 80.

Enter “NA” for: Purchased covered loans, § 1003.4(a)(24);













Transactions for which the credit decision was made without relying on combined loan-to-value ratio, Comment 4(a)(24)-4

(35) Loan Term § 1003.4(a)(25), Comments 4(a)(25)-1 through -5

Number of months after which the legal obligation will mature or terminate

Enter, in numeral form, the number of months after which the legal obligation will mature or terminate, or would have matured or terminated.

Example: If the loan term is 360 months, enter 360.

Enter “NA” for covered loan or application without a definite term, such as a reverse mortgage, Comment 4(a)(25)-5

(36) Introductory Rate Period


Number of months until the first date the interest rate may change

Enter, in numeral form, the number of months, or proposed number of months in the case of an application, until the first date the interest rate may change after closing or account opening.

Example: If the introductory rate period is 24 months, enter 24.

Enter “NA” for: Covered loan or application with a fixed rate,

Comment 4(a)(26)-3; Purchased covered loan with a fixed rate,

Comment 4(a)(26)-4

(37) Non-Amortizing Features

§ 1003.4(a)(27), Comment 4(a)(27)-1

Whether the transaction involves a balloon payment, interest-only payments, negative amortization, or any other type of non-amortizing feature

BALLOON PAYMENT. Indicate whether the contractual terms include, or would have included, a balloon payment by entering: Code 1—Balloon payment Code 2—No balloon payment INTEREST-ONLY PAYMENTS. Indicate whether the contractual terms include, or would have included, interest-only payments by entering: Code 1—Interest-only payments Code 2—No interest-only payments













NEGATIVE AMORTIZATION. Indicate whether the contractual terms include, or would have included, a term that would cause the covered loan to be a negative amortization loan by entering: Code 1—Negative amortization Code 2—No negative amortization OTHER NON-AMORTIZING FEATURES. Indicate whether the contractual terms include, or would have included, any term, other than those described in §§ 1003.4(a)(27)(i), (ii), and (iii) that would allow for payments other than fully amortizing payments during the loan term by entering: Code 1—Other non-fully amortizing features Code 2—No other non-fully amortizing features

(38) Property Value


Value of the property relied on that secures the loan

Enter, in dollars, the value of the property securing the covered loan or, in the case of an application, proposed to secure the covered loan, relied on in making the credit decision.

Example: If the property value is $350,500, enter 350500.

Enter “NA” for: Transactions for which no credit decision was


Transactions for which the credit decision was made without relying on property value, Comment 4(a)(28)-4

(39) Manufactured Home Secured Property Type


Whether the covered loan is secured by a manufactured home and land or a manufactured home and not land

Indicate whether the covered loan or application is, or would have been, secured by a manufactured home and land, or by a manufactured home and not land, by entering: Code 1—Manufactured home and land Code 2—Manufactured home and not land Code 3—Not applicable

To report not applicable, enter “Code 3” for: The dwelling related to the property identified is

not a manufactured home, § 1003.4(a)(29); Comment 4(a)(29)-4

The dwelling related to the property identified is a manufactured home community that is a multifamily dwelling, Comment 4(a)(29)-2;











Comment 4(a)(29)-4

(40) Manufactured Home Land Property Interest


Information about the applicant’s or borrower’s ownership or leasehold interest in the land where the manufactured home is located

Indicate the applicant’s or borrower’s land property interest in the land on which a manufactured home is, or will be, located by entering: Code 1—Direct ownership Code 2—Indirect ownership Code 3—Paid leasehold Code 4—Unpaid leasehold Code 5—Not applicable

To report not applicable, enter “Code 5” for: The dwelling related to the property identified is

not a manufactured home, § 1003.4(a)(30); Comment 4(a)(30)-6

The dwelling related to the property identified is a manufactured home community that is a multifamily dwelling, Comment 4(a)(30)-4; Comment 4(a)(30)-6

A location for the manufactured home related to a covered loan or application has not been identified, § 1003.4(a)(30); Comment 4(a)(9)-5

(41) Total Units § 1003.4(a)(31), Comments 4(a)(31)-1 through -4

Number of individual dwelling units related to the property

Enter, in numeral form, the number of individual dwelling units related to the property securing the covered loan or, in the case of an application, proposed to secure the covered loan.

Example: If there are five (5) individual dwelling units, enter 5.

(42) Multifamily Affordable Units


Number of individual dwelling units related to the property that are income-restricted under federal, state, or local affordable housing programs

Enter, in numeral form, the number of individual dwelling units related to any multifamily dwelling property securing the covered loan or, in the case of an application, proposed to secure the covered loan, that are income-restricted pursuant to Federal, State, or local affordable housing programs.

Example: If there are five (5) multifamily affordable units, enter 5. NOTE: Enter “0” for a covered loan or application related to a

Enter “NA” for covered loans or applications where the property securing the covered loan or, in the case of an application, proposed to secure the covered loan is not a multifamily dwelling, § 1003.4(a)(32); Comment 4(a)(32)-6














multifamily dwelling that does not contain any such income-restricted individual dwelling units.

(43) Application Channel (Submission of Application and Initially Payable to Your Institution)

§ 1003.4(a)(33), Comments 4(a)(33)-1, 4(a)(33)(i)-1, and 4(a)(33)(ii)-1 through -2

Indicators of whether the application was submitted directly to the FI, and whether the obligation was initially payable to the FI

SUBMISSION OF APPLICATION. Indicate whether the applicant or borrower submitted the application directly to your institution by entering: Code 1—Submitted directly to your institution Code 2—Not submitted directly to your institution Code 3—Not applicable INITIALLY PAYABLE TO YOUR INSTITUTION. Indicate whether the obligation arising from the covered loan was, or, in the case of an application, would have been, initially payable to your institution byentering: Code 1—Initially payable to your institution Code 2—Not initially payable to your institution Code 3—Not applicable

To report not applicable for Submission of Application, enter “Code 3” Purchased covered loans, § 1003.4(a)(33);

To report not applicable for Initially Payable to Your Institution, enter “Code 3” Purchased covered loans, § 1003.4(a)(33); Applications that were withdrawn, denied, or

closed for incompleteness, if the institution had not determined whether the covered loans would have been initially payable to the institution reporting the applications, Comment 4(a)(33)(ii)-2

(44) Mortgage Loan Originator NMLSR Identifier


National Mortgage Licensing System & Registry (NMLSR) identifier for the mortgage loan originator

Enter the Nationwide Mortgage Licensing System and Registry mortgage loan originator unique identifier (NMLSR ID) for the mortgage loan originator.

Example: If the NMLSR ID for the mortgage loan originator is 123450, enter 123450.

Enter “NA” for: Covered loans or applications in which the

mortgage loan originator is not required to obtain and has not been assigned an NMLSR identifier, Comment 4(a)(34)-2.

Enter “NA” or voluntarily report the NMLSR ID for: Purchased covered loans that satisfy the

coverage criteria of Regulation Z, § 1026.36(g) and were originated prior to January 10, 2014,


http://www.consumerfinance.gov/eregulations/1003-Subpart-Interp/2015-26607_20180101#1003-4-a-33-Interp-1











Comment 4(a)(34)-4; Purchased covered loans that do not satisfy

the coverage criteria of Regulation Z, § 1026.36(g) and were originated prior to January 1, 2018, Comment 4(a)(34)-4.

(45) Automated Underwriting System


Name of the automated underwriting system used by the FI to evaluate the application and the result generated by that system

AUTOMATED UNDERWRITING SYSTEM. Indicate the automated underwriting system(s) (AUS) used by your institution to evaluate the application by entering up to five (5) of the following: Code 1—Desktop Underwriter (DU) Code 2—Loan Prospector (LP) or Loan Product Advisor Code 3—Technology Open to Approved Lenders (TOTAL)

Scorecard Code 4—Guaranteed Underwriting System (GUS) Code 5—Other

NOTE: If Code 5 is selected in any Automated Underwriting System field, enter the name of the specific other AUS(s) not listed above in the AUS Conditional Free Form Text Field for Code 5. See below for more information on the AUS Conditional Free Form Text Field for Code 5.

Code 6—Not applicable NOTE: If fewer than five (5) automated underwriting systems were used by your institution to evaluate the application or if Code 6 is selected, leave the remaining Automated Underwriting System data fields blank.

AUS CONDITIONAL FREE FORM TEXT FIELD FOR CODE 5. Enter

To report not applicable, enter “Code 6” for Automated Underwriting System and “Code 17” for Automated Underwriting System Result for: Purchased covered loans, § 1003.4(a)(35);

Comment 4(a)(35)-5; Transactions for which an AUS, as defined in

§ 1003.4(a)(35)(ii), was not used to evaluate the application, Comment 4(a)(35)-2 and -4;

Covered loans or applications when applicant and co-applicant are not natural persons, Comment 4(a)(35)-6








more than one other Automated Underwriting System, as applicable. The maximum number of characters for this field is 255 characters, including spaces. If Code 5 is not AUTOMATED UNDERWRITING SYSTEM RESULT. Indicate the result(s) generated by the automated underwriting system (AUS) previously indicated by entering: Code 1—Approve/Eligible Code 2—Approve/Ineligible Code 3—Refer/Eligible Code 4—Refer/Ineligible Code 5—Refer with Caution Code 6—Out of Scope Code 7—Error Code 8—Accept Code 9—Caution Code 10—Ineligible Code 11—Incomplete Code 12—Invalid Code 13—Refer Code 14—Eligible Code 15—Unable to Determine Code 16—Other

NOTE: If Code 16 is selected in an Automated Underwriting System Result field, enter the specific other AUS result(s) not listed above in the AUS Result Conditional Free Form Text Field for Code 16. See below for more information on the AUS Result Conditional Free Form Text Field for Code 16.





Code 17—Not applicable NOTE: Use Code 17 if the requirement to report an AUS result does not apply to the covered loan or application that your institution is reporting. Leave the remaining Automated Underwriting System Result data fields blank.

For the following AUS results returned, use the following Codes for these AUS: Federal National Mortgage Association (Fannie Mae)-Use Code 1,

2, 3, 4, 5, 6, 7, or 16 Federal Home Loan Mortgage Corporation (Freddie Mac)-Use

Code 8, 9, 10, 11, 12 or 16 FHA TOTAL Scorecard- Use Code 8 or 13 GUS-Use Code 5, 8, 10, 13, 14, 15 or 16 NOTE: If fewer than five (5) results were generated by the automated underwriting system(s) previously indicated or Code 17 is used, leave the remaining Automated Underwriting System Result data fields blank. AUS RESULT CONDITIONAL FREE FORM TEXT FIELD FOR CODE 16. Enter more than one other Automated Underwriting System Result, as applicable. The maximum number of characters for this field is 255 characters, including spaces. If Code 16 is not entered, leave this field blank.

(46) Reverse Mortgage

§ 1003.4(a)(36) Indicator of whether the transaction is for a reverse mortgage

Indicate whether the covered loan is, or the application is for, a reverse mortgage by entering: Code 1—Reverse mortgage






Code 2—Not a reverse mortgage

(47) Open-End Line of Credit

§ 1003.4(a)(37), Comment 4(a)(37)-1

Indicator of whether the transaction is for an open-end line of credit

Indicate whether the covered loan is, or the application is for, an open-end line of credit by entering: Code 1—Open-end line of credit Code 2—Not an open-end line of credit

(48) Business or Commercial Purpose

§ 1003.4(a)(38), Comment 4(a)(38)-1

Indicator of whether the transaction is primarily for a business or commercial purpose

Indicate whether the covered loan is, or the application is for a covered loan that will be made, primarily for a business or commercial purpose by entering: Code 1—Primarily for a business or commercial purpose Code 2—Not primarily for a business or commercial purpose

a This chart combines information from the previous Summary of Reportable Data Chart and Reporting “Not Applicable” Chart, as well as the 2018 Filing Instructions Guide. This chart does not contain information about the submission process or procedures. This chart summarizes requirements under HMDA and Regulation C, and does not itself establish any binding obligations. It is intended only to act as a reference and not as a substitute for the regulation or its official commentary. Always consult the regulation text and official commentary for a complete understanding of the law. b This column provides the information from Section 4.2 of the 2018 Filing Instructions Guide. Further information can be found in the 2018 Filing Instructions Guide. Some information may not be presented exactly as in the 2018 Filing Instructions Guide. This chart is not a substitute for the 2018 Filing Instructions Guide, and that chart should be consulted. c This column details the information provided in Regulation C on when a data point is considered not applicable and the appropriate code found in the 2018 Filing Instructions Guide to signify it . If more information is needed, please review the rule and commentary specified and the 2018 Filing Instructions Guide.





https://www.consumerfinance.gov/data-research/hmda/static/for-filers/2018/2018-HMDA-FIG.pdf

https://www.consumerfinance.gov/data-research/hmda/static/for-filers/2018/2018-HMDA-FIG.pdf

Reportable HMDA Data: A regulatory and reporting … · 1 REPORTABLE HMDA DATA: A REGULATORY AND R...

Documents

Transcript of Reportable HMDA Data: A regulatory and reporting … · 1 REPORTABLE HMDA DATA: A REGULATORY AND R...