Annual Report Annual Report Annual Report - INFLIBNET Centre
Report
5
PROJECT SEMESTER REPORT TERMINAL BALLISTICS RESEARCH LABORATORY, DEFENCE RESEARCH AND DEVELOPMENT ORGANISATION, RAMGARH. DEVELOPMENT OF HIGH VOLTAGE PULSE FORMING NETWORKS Submitted by SIDDHARTH BANSAL 101005065 Under the Guidance of Dr. Jainy Sachdeva Mrs. Madhvi Narula Assistant Professor Sc. ‘C’ Pulse Power Group Department of Electrical and Instrumentation Engineering THAPAR UNIVERSITY, PATIALA
-
Upload
siddharth-bansal -
Category
Documents
-
view
215 -
download
2
Transcript of Report
PROJECT SEMESTER REPORT
TERMINAL BALLISTICS RESEARCH LABORATORY,DEFENCE RESEARCH AND DEVELOPMENT ORGANISATION,
RAMGARH.
DEVELOPMENT OF HIGH VOLTAGEPULSE FORMING NETWORKS
Submitted by
SIDDHARTH BANSAL101005065
Under the Guidance of
Dr. Jainy Sachdeva Mrs. Madhvi NarulaAssistant Professor Sc. ‘C’ Pulse Power Group
Department of Electrical and Instrumentation EngineeringTHAPAR UNIVERSITY, PATIALA
June 2014
DECLARATION
I hereby declare that the project work entitled “Development of High Voltage Pulse
Forming Network” is an authentic record of my own work carried out at Terminal
Ballistics Research Laboratory (TBRL, DRDO) as requirements of project semester for
the award of degree of B.E. (Electronics Instrumentation and control Engineering), Thapar
University, Patiala, under the guidance of Mrs. Madhvi Narula and Dr. Jainy Sachdeva,
during January, 2014 to June, 2014.
SIDDHARTH BANSALRoll No. : 101005065
Date: ___________________
Certified that the above statement made by the student is correct to the best of our knowledge and belief.
Dr. Jainy Sachdeva Mrs. Madhvi NarulaAssistant Professor Sc. ‘C’Thapar University Pulse Power GroupPatiala TBRL (DRDO)
ACKNOWLEDGEMENT
I take this opportunity to express my sincerest regards and gratitude to
Dr. Manjit Singh, OS & Sc ‘H’, Director T.B.R.L for allowing me to undergo industrial
training in this pioneering organization.
I am highly grateful to my Training Head Sh. APS Sodhi, Sc ‘G’, Group Director,
Pulse Power Group, for being the driving force in encouraging me to be fully dedicated
towards my industrial training. He truly has been a source of inspiration and always guided
me to pursue the technical and professional approach while undergoing my training
experience. It was through his support that I received the opportunity to undergo this
fruitful part of our curriculum in such a successful manner.
My sincere thanks to my mentors Sh. Sahil Sharma, Sc ‘D’ and Ms. Hardeep Kaur,
Sc ‘C’ and their encouraging attitude and insights in the field of technology has helped me
gain a lot of knowledge during my tenure. Their perseverance as a scientist in the face of
problems helped me immensely in completing my project.
Siddharth Bansal
Roll No. 101005065
