Replacement Parts List - Headline Filters...The porous membranes are produced from pure PTFE; they...
1
Replacement Parts List 22-27-xx Disposable Filter Element GMS170-ER S.S. GMS170-CA S.S. Stainless Steel Retainer Cap MKGMS170 Membrane Kit (C,E) SSB GMS170 316L Stainless Steel Bowl (B) MB130 Mounting Bracket (Not Pictured) Note – Please replace “xx” with micron rating or grade Available O-Rings GN130VP Nitrile GV130VP Viton (Standard) (F) KZ130VP Kalrez™ GS130VP Silicone Please Note: Exotic Materials are available, for Alloy C-276 (GMS170H and for Alloy 400 (GMS170M). Oxygen Cleaning Service Available Note – Please replace “xx” with micron rating or grade Headline Filters Limited Mill Hall Business Estate Aylesford Kent, ME20 7JZ www.headlinefilters.com Model GMS170 THE COPYRIGHT OF THIS DRAWING IS RESERVED BY HEADLINE FILTERS. IT IS ISSUED ON CONDITION THAT IT IS NOT COPIED, REPRODUCED OR DISCLOSED TO A THIRD PARTY EITHER WHOLLY, OR IN PART WITHOUT CONSENT IN WRITING. Material: Head: 316L Stainless Steel Bowl: 316L Stainless Steel Internals: 316L Stainless Steel Standard Gasket / O-ring: Viton Drain Type: N/A Maximum Temperature: 100°C Maximum Pressure: 150 Bar Internal Volume: Weight: DO NOT SCALE DRAWING IF IN DOUBT ASK Drawing No. HF4/3706 [email protected] Model: GMS170 1/4"NPT The porous membranes are produced from pure PTFE; they are extremely inert and have very low absorption levels. There are two standard grades available for use in low to high flow applications. The M1 (0.1 micron) is a low flow type membrane suitable for most liquids and the M2 (0.8 micron) is a high flow type recommended for higher surface tension liquids. Our Oleophobic membranes designated by the “H” suffix (i.e. MT.33.M4H) have an extra thin layer which repels hydrocarbons and will block both water and hydrocarbons. They exhibit the same flow characteristics as our standard membranes. Stainless Steel Element Retainer (A) GMS105 SD Sintered Disc Stainless Steel (D)
Transcript of Replacement Parts List - Headline Filters...The porous membranes are produced from pure PTFE; they...
Replacement Parts List 22-27-xx Disposable Filter ElementGMS170-ER S.S.
GMS170-CA S.S. Stainless Steel Retainer Cap
MKGMS170 Membrane Kit (C,E)
SSB GMS170 316L Stainless Steel Bowl (B) MB130 Mounting Bracket (Not Pictured)
Note – Please replace “xx” with micron rating or grade Available O-Rings
GN130VP NitrileGV130VP Viton (Standard) (F) KZ130VP Kalrez™GS130VP Silicone
Please Note: Exotic Materials are available, for Alloy C-276 (GMS170H and for Alloy 400 (GMS170M). Oxygen Cleaning Service Available Note – Please replace “xx” with micron rating or grade
Headline Filters Limited Mill Hall Business Estate Aylesford
Kent, ME20 7JZwww.headlinefilters.com
Model GMS170 THE COPYRIGHT OF THIS DRAWING IS RESERVED BY HEADLINE FILTERS. IT IS ISSUED ON CONDITION THAT IT IS NOT COPIED, REPRODUCED OR DISCLOSED TO A THIRD PARTY EITHER WHOLLY, OR IN PART WITHOUT CONSENT IN WRITING.
Material:Head: 316L Stainless Steel Bowl: 316L Stainless Steel
Internals: 316L Stainless Steel Standard Gasket / O-ring: Viton
Drain Type: N/AMaximum Temperature: 100°C Maximum Pressure: 150 Bar Internal Volume: Weight: DO NOT SCALE DRAWING
IF IN DOUBT ASK Drawing No. HF4/3706
Model: GMS170 1/4"NPT
The porous membranes are produced from pure PTFE; they are extremely inert and have very low absorption levels. There are two standard grades available for use in low to high flow applications. The M1 (0.1 micron) is a low flow type membrane suitable for most liquids and the M2 (0.8 micron) is a high flow type recommended for higher surface tension liquids.
Our Oleophobic membranes designated by the “H” suffix (i.e. MT.33.M4H) have an extra thin layer which repels hydrocarbons and will block both water and hydrocarbons. They exhibit the same flow characteristics as our standard membranes.
Stainless Steel Element Retainer (A)
GMS105 SD Sintered Disc Stainless Steel (D)
