Replacement Parts for Atronic Gaming Catalogue - … Catalogue Replacement Parts for Atronic 17”...

Gaming Catalogue

W W W . S U Z O . C O M

Replacement Parts for Atronic

17” Replacement CRT Monitor for Atronic Cashline Machines

Part no. Description

150MG4077 17” VGA Cashline monitor without touchscreen Atronic Ref. 65018825

150MG4095 17” VGA Cashline monitor including touchscreen Atronic Ref. 65024300

LCD Upgrade kits • Upgradeyouroldermachineswithamodernlookand attractmoreplayers.• High-gradeLCDpanelsandcomponentsproviding betterpicturequality,balancedpictureimageand longerlifespanwithno“burn-in”likeCRTmonitors.• Drop-inreplacementsfor17”and19”games (SlanttopandUprightcabinets).• Installedonthecasinofloorinlessthen15minutes.

17” LCD Upgrade for Atronic Cashline• Direct replacement for Atronic machines. • For 17” Atronic universal cabinet ref. 65018825 and 65024300. • Premium PVA panel with widest viewing angle available - 178º. • Units include a durable plastic injection molded bezel which provides for easy installation. • These LCDs are designed to meet the rugged 24/7 demands of the Gaming Industry. • Manufactured with premium grade components. • Designed to run cooler, last longer. • Available as a complete touchmonitor (includes touchscreen, controller and bezel) or LCD monitor only without touch.

Part no. Description Atronic Ref.H49-4096-00 17” LCD Touchmonitor 65024300H49-3917-00 17” LCD Monitor 65018825

17” LCD Upgrade for Atronic• Touchmonitor (including touchscreen, controller and bezel).

Part no. Description Atronic Ref.150MG4090 17” LCD Touchmonitor 65033963

Part no. Description Atronic Ref.H49-0179-00 32” LCD Touchmonitor 65049946

17” LCD Upgrade for Atronic Emotion• Available as a complete touchmonitor (includes touchscreen, controller and bezel) or LCD monitor only without touch.

Part no. Description Atronic Ref.H49-2562-00 17” LCD Touchmonitor 65046618

H49-2561-00 17” LCD Monitor 6504503565040184

19” LCD Monitors for Atronic• Available as monitor without touch,with touchscreen only or complete touchmonitor including touchscreen, controller and bezel.

Part no. Description Atronic Ref.H49-0148-00 19” LCD monitor without touchscreen 65051695H49-0181-00 19” LCD monitor including touchscreen 65050609H49-0150-00 19” LCD Touchmonitor 65051696

15” LCD Touchmonitor for Atronic Cashline

• 15” LCD so same size as old 17”CRT. • Uses ELO SAW technology so resistant against scratches. • Door mount solution. • Cost effective.

Part no. Description150TFT0008 15” LCD Touchmonitor for Cashline

32” LCD with Touchscreen.• Give new life to your old Atronic machine #65049946. • Kits are made with high grade Samsung panel and offers a better picture quality with no “burn in”, than traditional CRT’s. • Includes touch screen and controller. • LCD has a wide viewing angle (178º in all directions). • Analog and digital inputs. • Supports up to 16.7 million colours.• Analog and digital inputs.

Front

Back

145

S U Z O I N T E R N A T I O N A L146

Gaming CatalogueReplacement Parts for Bally Gaming

Lamps• Used in all hoppers. • Plastic model with stainless steel insert.

Hopper Knife

• Can be used in all hoppers after model 2000. • Steel hopper knife.

Metal Hopper Knife

• Used for rock and roller assembly.Microswitch

Rock and Roller Assembly

Part no. Description Bally Ref.14-0281 Hopper knife P846-1 / M03068-001A

Part no. Description14-0296 Hopper knife

Part no. Description Bally Ref.14-0455-1 Rock and roller assembly A2893-6

Part no. Description Bally Ref.22-0715 Microswitch E108-200

Coin DeflectorPart no. Description Bally Ref.14-0095 Coin deflector P839

• 24V 31rpm.Hopper Motor

• Including bushings.Agitator

Part no. Description Bally Ref.14-0571 Agitator R526

Part no. Description Bally Ref.14-0654-1310 Hopper motor E119-520

• Used for replacement of incandescent lamps in buttons.• 5mm (T1-3/4).

• Used in various applications in Bally slant top and upright.

White LED

Microswitches

Part no. Description Bally Ref.161-412059 12V LED 83779

• Replacement power supply board for Bally slots. • Used in Bally pro series and Bally 5000, V7000 and V7200 series.• 63.5 Watts.

Part no. DescriptionH80-1178-00 PSU Board

PSU Board

Part no. Description Packing-73 E-00120-0108 100-55 E-00125-0005 100-86 E-00125-0084 100-159 E-00125-0089 100-86 E-00125-0095 100H91-1319-10 E-00125-0096 10H91-0137-00 E-00125-0099 10H91-1126-10 E-00125-0110 10-85 E-00125-0118 100H91-1222-10 E-00125-0120 10H91-1220-10 E-00125-0123 10

Fluorescent Lamps Part no. Description Bally Ref.F4T5CW Fluorescent lamp 4W E-00412-0025F6T5CW Fluorescent lamp 6W E-00412-0006

F8T5CW Fluorescent lamp 8W E-00412-0005E-00412-0021

F14T8CW Fluorescent lamp 14W E-00412-0014F15T8CW Fluorescent lamp 15W E-00412-0013F18T8K24CW Fluorescent lamp 18W E-00412-0019

Part no. Description Bally Ref.H95-4114-00 Microswitch E-00108-0223H95-4115-03 Microswitch E-00108-0377H95-4118-90 Microswitch E-00108-0344HE108-387 Microswitch E-00108-0387HE108-399 Microswitch E-00108-0399

Circular Fluorescent Lamps Part no. Description Bally Ref.FC22CW Circular Fluorescent lamp 22W E-00412-0020FC32CW Circular Fluorescent lamp 32W E-00125-0116FC40CW Circular Fluorescent lamp 40W E-00125-0115

Starter for Fluorescent Lamps Part no. Description Bally Ref.FS2 Starter 14-15-20W E-00411-0008 / 9 / 10FS5 Starter 4-6-8W E-00411-0007

Eproms• Blank eproms.• All STM brand.

Part no. Description Bally Ref.M27C801-100F1 8Mb 100Ns E-00867-0046M27C1001-10F1 1Mb 100Ns E-00867-0037

Doorswitch• Push ( momentary ) function. • 4.8x0.5mm ( 0.187”x0.02” ) terminals.

Doorswitch• Push / Pull ( cheat ) function. • 4.8x0.8mm ( 0.187”x0.032” ) terminals. • Bally ref. E-00108-0384.

Part no. Description Bally ref.H53-7028-00 Doorswitch E-00108-0385

Part no. Description Bally ref.22-0746-1 Doorswitch E-00108-0384

W W W . S U Z O . C O M 147

Gaming CatalogueReplacement Parts for Bally Gaming

Cold Cathode for Bally M9000• Single raw cold cathode for Bally M9000 game with 19/20” Tatung LCD # L19LA25M21LC02 or #L195A25M21LB01. • No wiring or connectors included. • Rated at 70.000 hours

• 6.2” LCD panel for Bally I-View player tracking system. • Complete with 5-wire touchscreen. • Direct replacement for 1st and 2nd generation I-Views. • Will replace either the IDW or Hitachi LCD.

• For all Bally cabinets with widescreen monitors. • Direct replacements, can be installed in minutes. • Touchscreens included. • Available in 3 sizes.

Part no. DescriptionH91-1712-00 Cold Cathode for Bally M9000

Part no. DescriptionH49-13042-00 6.2” LCD panel with touch

Cold Cathode for Bally I-View Player Tracking System• For use on 1st generation IDW or 2nd generation Hitachi 6.2’ LCD panel. • Rated at 70.000 hours.

H91-0947-00

H49-6671-00

H49-0381-00

Part no. DescriptionH91-0947-00 For IDW LCD panelH91-0862-00 For Hitachi LCD panel

Part no. DescriptionH49-10732-00 20” LCD monitor with touchH49-10879-00 26” LCD monitor with touchH49-11027-00 32” LCD monitor with touch

* Graphic Panel not included

6000 Denom LED Panel for Bally• Direct LED display replacement panel. • Contains two LED boards, replacing original incandescent lamps. • Equipped with connector to interface with Bally power harness. • Installed in minutes, no special tools required. • 5-8 year life span with 75% lower power consumption. • Operates on 7.5 volts DC or AC.

Part no. DescriptionH70-1813-00 6000 Denom LED Panel

Touchscreen for Bally I-View Player Tracking System

Mylar Overlay for Bally I-View

17” Upgrade Kit for Bally Upright Cabinet

17” Upgrade Kit for Bally Slant Top

Widescreen LCD monitors

19” Upgrade Kit for Bally 9000 Upright

15” Upgrade Kit Gamemaker

LCD Touchpanel Bally I-view

Part no. DescriptionH91-0771-00 Fluorescent lamp for Bally Monte Carlo

Fluorescent Lamp for Bally Monte Carlo• 24W compact fluorescent. • Used behind belly glass on Bally Monte Carlo.

Fluorescent Lamp for Bally M9000 Topper Box• 36W compact fluorescent lamp for Bally M9000 Topper Box.

Part no. DescriptionH91-0986-00 36W Compact Fluorescent lamp

• Replacement 5-wire touchscreen with metal housing. • For use with 1st generation (IDW) systems.

• Mylar overlay for Bally I-View player tracking systems. • For touchscreen on 6.2” Hitachi LCD.

Part no. DescriptionH49-0631-00 Touchscreen for Bally I-View Player Tracking System

Part no. DescriptionH91-7504-00 Mylar overlay

Bally LCD Upgrade kits • Upgrade your older machines with a modern look and attract more players. • High-grade LCD panels and components providing better picture quality, balanced picture image and longer life span with no “burn-in” like CRT monitors. • Drop-in replacements for 17” and 19” games ( Slant top and upright cabinets ). • Installed on the casino floor in less then 15 minutes.

• Including touchscreen, controller and bezel.Part no. DescriptionH49-2638-00 17” Upgrade kit for Bally upright

• Including touchscreen, controller and bezel.

• Including touchscreen and controller.

Part no. DescriptionH49-0217-00 17” Upgrade kit for Bally slant top

Part no. Description150TFT0011 19” Upgrade kit for Bally 9000

• Upgrade kits for Bally Gamemaker.

Part no. DescriptionH49-0381-00 Upgrade kit for Bally gamemaker V7200H49-6671-00 Upgrade kit for Bally gamemaker V7000

H91-0862-00


Gaming CatalogueReplacement Parts for IGT

* Validator Bezel not included

S2000 Bill Validator Display Board• LED lighted PCB with new bracket. • Bright green bill face and yellow panel. • Equipped with connector to interface with original machine harness. • Installed in minutes with only a screwdriver. • 5-8 year life span. • Operates on 12 volts DC.

Part no. DescriptionH70-1814-00 S2000 Bill Validator Display

LED Display Board for Large Graphic Panels• LED board for large belly glass and topper graphic panels Ideal replacement for S2000, most slant top machines, and upright video poker topper panels. • Two minute installation with no modifications to original hardware or wiring. • Consumes 1/6th of the energy versus a standard fluorescent lamp. • Special hardware packs sold separately.

Part no. DescriptionH70-1867-00 LED Display Board for Large Graphic Panels

Slant Top Display Side Panels• Replaces F4 lamp and entire fixture assembly. • Metal housing stabilizes brackets from falling out . • Improved colour dispersion without shadows. • Direct replacement, plug-in convenience. • 5-8 year life span.• Low heat generation, 70% lower power consumption. • Easy to install, no tools required. • Power cord supplied for direct plug-in, operates on 12 volts DC.

Part no. DescriptionH70-1821-00 Display Panel for 17” Slant topsH70-1822-00 Display Panel for 19” Slant tops



LED Denom Arrow Panels• Direct replacement, plug-in convenience. • 5-10 year life span. • Equipped with connector to interface with machine harness. • Low heat generation, 50% lower power consumption. • Easy to install, no tools required. • Operates on 12 volts DC.

Part no. DescriptionH70-1817-00 Arrow panel for Game King UprightH70-1818-00 Arrow panel for “I” Games

Belly Glass LED Display Panel for IGT• Specially designed LED array using the latest LED driver technology. • Custom designed mounting bracket . • Bolts easily onto existing door panel, no modifications needed. • No ballast required, providing additional energy savings. • Return on investment is typically less than one year.

Part no. DescriptionH70-1866-00 Belly Glass LED Display Panel for IGT

Reel Denom Area LED Board• Replaces the incandescent lamp on reel machines. • Direct plug-in solution, brighter than the original lamp .

Part no. DescriptionH70-1862-00 Reel Denom Area LED Board

* Validator Bezel not included

Slant Top Bill Validator Displays• Greatly improve your bill face lighting. • Direct replacement, plug-in convenience. • Equipped with connector to interface with machine harness. • Low heat generation, 50% lower power consumption. • Easy to install, no tools required. • Operates on 13.5 volts DC.

Part no. DescriptionH70-1815-00 Slant Top Display, white LEDsH70-1816-00 Slant Top Display, Yellow/Green LEDs

Denom Panel LED Board for IGT S2000• Replaces incandescent lamps with crisp white LED display. • Decreases power consumption by 60%. • Powered by integrated connector interface from existing machine socket. • Easy installation; no modification, rewiring, cutting or drilling necessary. • Operates on existing 13.5V power supply.

Part no. DescriptionH70-1850-00 Denom Panel LED Board for IGT S2000

Ticket Printer Arrow LED Boards• Save money by replacing original boards that prematurely burn out.

Part no. DescriptionH70-1860-00 Ticket Printer Arrow LED Board, IGT Slant TopsH70-1861-00 Ticket Printer Arrow LED Board, IGT Uprights

• Replaces F14 or F15 fluorescent lamp in IGT 17” and 19”top boxes and upright belly glass. • Diamond cut diffusing panel provides even illumination. • Easy installation, just remove the fluorescent lamp, pop in the LED panel and the ballast power plug goes directly into the LED panel. • Low power consumption means less heat generated.

High Intensity LED for IGT Games

H70-4187-00

H70-391700

Part no. Used in Description

H70-2776-00 IGT 17” & 19” Top Box

F14 Replacement with horizontal plug configuration

H70-4187-00 IGT 17” & 19” Top Box

F14 Replacement with vertical plug configuration

H70-4096-00 IGT 17” & 19” Top Box

F15 Replacement with horizontal plug configuration

H70-4006-00 IGT 17” & 19” Top Box

F15 Replacement with vertical plug configuration

H70-3917-00 IGT Upright Belly Glass

F15 Replacement with Drop-in bracket system

W W W . S U Z O . C O M 149


Hopper Knife PlasticUsed in certain models IGT hoppers.

Part no. Description119-0040 Hopper knife plastic

• Used on game King and others. • 30RPM 24V.

Part no. Description IGT Ref.H70-0495-00 Hopper motor 35003290 / 35003590

Hopper Motor

Brake Assembly for IGT Hopper Motor

Hopper Break Spring• For IGT machines.

Part no. DescriptionH70-0018-00 Spring for break pawl

Coin WiperPart no. Description119-0004 Coin wiper

Coin DeflectorPart no. Description119-0005 Coin deflector

3-Star AgitatorWith metal inserts.

Part no. Description IGT Ref.119-0003 3-star agitator 57200800

• For IGT small coin escalators. Wiper Assembly

Wiper• For escalator hopper.

Part no. Description IGT Ref.H70-1216-00 Wiper 68102400

Universal Drop ChutePart no. Description IGT Ref.H70-0620-00 Drop chute 57325100

Coin-out Optic• For IGT hoppers.

Hopper Optic Cover• For IGT machines. • For high security optic.

Small coin knife guide• For IGT machines.

Part no. Description IGT Ref.H70-0619-00 Small coin knife guide 58131700

Part no. Description IGT Ref.H70-0589-00 Replacement hopper optic cover 68852800

• Made of 6/6 nylon. • Stronger and doesn’t dry out quickly. • Natural colour.

Acceptor Mounting Clip

Part no. DescriptionH42-1070-00 Acceptor mounting clip

• Now you don’t have to replace the whole motor. Just replace the broken pawl and save big. • Right and left available.

Left Right

Part no. DescriptionH70-0825-00 Right brake assemblyH70-0826-00 Left brake assembly

Hopper Wiper Rubber• For IGT machines. • Replacement rubber track for hopper wiper. • Held in place with 2 rivets.• Sold by the foot. • 12 feet per box.

Part no. DescriptionH70-0900-00 Hopper wiper rubber

Part no. Description IGT Ref.H70-0593-00 Replacement Wiper Assembly 68104200

Part no. Description IGT Ref.H70-0601-00 Replacement coin-out optic 37906300

Cold Cathode for IGT Nexgen Player Tracking System• For use with Hitachi 6.2” LCD panel. • Rated at 70.000 hours. • With or without wiring harness. • Sold in multiples of 10.

Part no. DescriptionH91-1056-00 Cold Cathode with wiring harness



Part no. Description IGT Ref.F15T8CW Fluoresc. lamp 15W CW 18”-46cm 19400490F14T8CW Fluoresc. lamp 14W CW 15”-38cm 19401390H91-0716-00 Fluoresc. lamp 17W CW 24”-61cm

Fluorescent Lamps

Circular Fluorescent LampPart no. Description IGT Ref.FC22CW 22W Circular fluorescent lamp 19403590FC32CW 32W Circular fluorescent lamp 19403390

Mini-Lamp for IGT Jeopardy Game• Very bright 2.6 watts. • Lamp No. 10969. • Wedge Base (T3.25). • 12 volts.

Part no. DescriptionH91-0586-00 Mini-lamp for IGT Jeopardy game

Replacement LEDSPart no. Description161-306059 LED 5mm 6V white161-412059 LED 5mm 12V white

Slant Top Cash Light Fixture• For IGT games. • Fixture only.


H70-1313-00 Slant top cash light fixtureRef. no. 19635800 replaces 19635400A

Electronic Ballast• For IGT machines. • For 8 or 15W lamps. • With polymer fuse. • 0.6A, 25Vdc .

• Ballast 25Vdc. • For 22-40W Circular lamps and 17W fluorescent lamp.

Part no. Description IGT Ref.H70-1151-00-R Ballast 19507800

Ballast

Thin-Lite Ballast for IGT• Used with IGT I-Game for the top box round circular lamp.

Part no. DescriptionH91-0991-00 Thin-Lite Ballast for IGT

Ballast 24Vdc - 22Watt• Used in conjunction with 8” circular lamp.

• For 5mm (T1-3/4) wedge base lamps or LEDS

Part no. Description IGT Ref.H70-1331-00 Lampholder 12004390

Lampholder

• For 10mm (T1-3/4) wedge base lamps or LEDS.

Part no. Description IGT Ref.H70-1467-00 Lampholder 12006690

Lampholder

Part no. Description IGT Ref.-47 Ba9S 6.3V 0.15 Amp 19301390-259 T-3-1/4 10mm 6.3V 0.25 Amp 19301590-86 T-1-3/4 6mm 6.3V 0.2 Amp 19302390

Lamps Cross Reference List

Part no. Description IGT Ref.H70-0506-00 Lamp Socket 12002790

Socket for Wedge Base Lamp #86

Light Pro LED Lamp AssemblyStop changing fluorescents and replacing ballasts!• LED lamp assembly replaces traditional fluorescents. • End caps can be removed and adjusted to maximize lighting. • For IGT machines simply plug the LED assembly harness into the lead that goes into the 24v electronic ballast.• Custom configurations and other sizes available. • Mounts in fluorescent sockets same as a fluorescent. • Super bright flat LEDs in round clear 5/8” tube. • 5-year life expectancy, low power, low heat, mercury free; up to 78% in energy savings. • No ballast required; saves you money on replacement and maintenance costs. • For other machines, use 24V line. • Warranty: 2 year. • RoHS compliant. • Low current 24V AC/DC. • Custom Sizes Available.

Part no. DescriptionH91-1017-00 Light Pro F15/T8 LED Lamp AssemblyH91-1026-00 Light Pro F6/T5 LED Lamp AssemblyH91-1046-00 Adapter Harness for Aristocrat Games

Part no. Description IGT Ref.H70-0635-00-R Electronic ballast, 15W 19507690H70-0824-00 Electronic ballast, 8W 19506990

Part no. Description IGT Ref.H70-1014-00 Ballast 24Vdc 19507400

If you are looking for IGT spare parts not listed here,please contact our sales department for assistance.

W W W . S U Z O . C O M 151


IGT Cable Wire to Belly Door• Length: 16”.

IGT Door Cable• Length: 11”.

Encl. Asm.-I/O Board• For IGT iGame.

I/O Board

IGT Optic Emitter• For Game King.

Replacement Emitter• For IGT games.

Encoder, Door Open Receiver• Replacement for: 57502900.

Mount for door-open optics.Part no. Description IGT Ref.H70-0980-00 Mount 65309900

Part no. Description IGT Ref.H70-0990-00 Encl. Asm. I/O board, replaces 75427802 14930203

Part no. Description IGT Ref.H70-0621-00 Optic coin in, replacement for 75306300 75306302

Part no. Description IGT Ref.

H70-0722-00 Replacement encoder housing replacement for 64910900 64912600

Part no. Description IGT Ref.H70-0632-00 I/O board 14930200 / 14940200W

IGT Bill Validator Bezel

Optic/Coin-In• Use in IGT Game King.

Replacement Encoder Housing• For IGT games.

Optics Assy-Door DIB

Replacement Insert• For IGT games.

• For IGT 8032 Processor board. • 50/60 Hz. • 5 Leads.

24V Transformer

Part no. DescriptionH70-1330-00 24V Transformer

Part no. Description IGT Ref.H70-1355-00 IGT Cable wire to Belly 29000600

Part no. Description IGT Ref.H70-1513-00 IGT Door cable 29000100

Part no. Description IGT Ref.H70-0608-00 IGT optic Emitter 37105500

Part no. Description IGT Ref.H70-0478-00 Replacement Emitter 57506900

Part no. Description IGT Ref.H70-0482-00 Encoder 57506800

Part no. Description IGT Ref.H70-1266-00 IGT Bill Validator Bezel 65219400

Part no. Description IGT Ref.H70-1370-00 Optics assy 37501000

Part no. Description IGT Ref.H70-0452-00 Replacement insert 58405411

Cold Cathode Lamps for IGT monitors•Raw cold cathode lamps without harness.

Part no. DescriptionH91-7876-00 Cold cathode for 10" LCDH91-8002-00 Cold cathode for 15” LCDH91-8129-00 Cold cathode for 17” LCDH91-8257-00 Cold cathode for 19” LCD



• Lithium battery 3.6V. • Used on S-Plus games processor board.

Battery

Part no. DescriptionH27-1236-00 Battery

Lithium Battery • 3.6Volt 1/2AA Size with Pig Tales. • Used in IGT “S” Plus, PE+ MPU boards.

Part no. DescriptionH27-1002-00 3.6Volt battery

• For IGT Slant Top games. • Plate dimensions: 168 x 73mm. • Chrome finish.

Coin Entry Blanking Plate

Part no. DescriptionH70-1587-00 Coin entry blanking plate

Switch mini,DPDT, Wide Lever Cherry E61-42MA

Part no. DescriptionH70-1022-00 Switch mini

Subminiature Switch Cherry E62-30A 10 Amps

Switch Locks• Key is removable in OFF position only. • Momentary or ON/OFF available. • Double bitted keys are keyed alike #2341 with 2 keys per lock. • Spade terminals. • Barrel length: 27mm. • Overall length: 22mm. • 4 amps/125Vac, 2amps/250Vac.


H30-1086-00 Momentary switch lock. Key is removable only in the OFF position

H30-1086-01 On/Off Switch lock. Key is removable only in the OFF position

• Used on IGT slot machines. • 8 Ohm, .4 watt. • 4 mounting holes.

2” Shielded Speaker

• Size: 15,5 X 11mm.

IGT Players Panel Compression Spring

IGT Belly Door Switch• Used in newer games such as Game King.

Roller Switch for IGT

• Used as replacement switch in push buttons.

• 5 amp switch with roller lever. • .110 tab terminals.

Microswitch

5 Amp Switch for IGT• 5 Amp switch. • .110 x .020 tab terminals.

IGT Switch

• For IGT machines. • 1 Amp, 120Vac.

Self Test Switch

Coin Entry Cover Plate• Replacement cover plate for IGT upright machines. • Covers the opening after the top coin entry is removed. • 16-gauge stainless steel. • Size: 81 x 33mm. • Supplied with four nuts to attach plate.

Part no. DescriptionH42-3412-00 Coin entry cover plate

Part no. Description IGT Ref.H95-4139-00 Subminiature switch 510108900

Part no. Description IGT Ref.H70-1023-00 Door switch. replaces 51908990 51908991

Part no. Description IGT Ref.H70-0814-00 Microswitch, replaces 51010890 51000190

Part no. Description IGT Ref.H70-0634-00 IGT Players panel compression spring 33103500

Part no. Description IGT Ref.H95-0015-00 Roller switch for IGT 51015190

Part no. Description IGT Ref.H70-1752-00 Microswitch 51015890

Part no. Description IGT Ref.B7C022-01-ZZZZ 5 Amp switch for IGT 51514790

Part no. Description IGT Ref.H42-8092-01 Self test switch 51602590

Part no. Description IGT Ref.H70-0014-00 2” Speaker 13001490

W W W . S U Z O . C O M 153


19 Pin AMP Connectors for IGT Monitors

Part no. Description IGT Ref.0-208210-2 19 pin AMP con. plug 217068900-208209-2 19 pin AMP con. receptacle 21006290

Contacts for AMP Metrimate drawer Connector

• For IGT Players Edge Plus games. • Due to a change in Molex plug sizes, new monitors are incompatible with older games. • Harness allows new monitors to be placed into older games.

Retrofit Monitor Harness for IGT Games

Part no. Description0-163083-8 Female 16-20 AWG tin plated0-163081-8 Male 16-20 AWG tin plated

• 40mm x 20mm. • Supplied complete with connector. • Used in Game King series.

Cooling Fan 24Vdc

• Used in IGT “S” Plus Upright. IGT Reel Master Assy with Motor

• 6-digit non-resetable counter. • Counting speed: 20 counts per seconds. • 13”flying leads. • 24Vac; no diode.

6-Digit Meter for IGT Reel Machines

• 6-digit non-resetable counter. • Counting speed: 20 counts per seconds. • PC board mounting, 24Vdc.

6-Digit Meter for IGT Reel Machines

• 24Vdc. • PC Board mounting.

7-Digit Meter for IGT S2000 I Games

Part no. DescriptionH42-7105-00 Meter 7 Digits

Cooling Fan• 80 x 80 x 25mm. • Sealed steel ball bearings for long life. • Sturdy plastic construction . • 24Vdc, 0.18A.

Reel optic IGT

• For IGT machines. • 24Vdc.

Solenoid Assembly

Panasonic Card Reader for Player Tracking• Used in IGT Smart system player tracking units. • Panasonic #Zu-M2121-S352 magnetic card reader. • Black bezel included. • 2 tracks, magnetic head, small size, light weight. • Size: Outside dimensions 102mm. (W) x100mm (D) x 26mm.

Part no. DescriptionH80-1208-00 Panasonic card reader

• 120mm x 120mm x 38mm. • 115Volt. • Supplied with lead wires. • Used in IGT machines.

Cooling Fan

Part no. DescriptionH80-0006-22 Cooling fan

Reel Harness• For IGT machines.

Part no. Description IGT Ref.H70-0579-00 Retrofit monitor harness for IGT games 60705501

Part no. Description IGT Ref.H70- 1006-00 Cooling fan 26003800

Part no. Description IGT Ref.H70-0594-00 Reel master assembly 66001600

Part no. Description IGT Ref.H42-7430-00 6-Digit meter for IGT machines 29203490

Part no. Description IGT Ref.H42-7431-00 6-Digit meter for IGT slot machines 29209390

Part no. Description IGT Ref.H80-0273-00 3.15” Fan for IGT slot machines 26002990

Part no. Description IGT Ref.H70-0580-00 Reel optic 37901400

Part no. Description IGT Ref.H70-0642-00 Solenoid Assembly 45003800

Part no. Description IGT Ref.H70-0641-00 Reel harness 60753600



Players Edge Plus Upright Replacement Button SetsIGT S-Plus Upright Repl. Button Sets

• Small square and rectangular buttons with clear caps. • All buttons have white legends and black print except the “change” button which has a red legend and white print. • Fitted with -86 6.3V lamp, 6 or 12V white led. • Set includes: 5 Rectangular “Hold/Cancel” buttons. 1 Rectangular “Cash Out” button. 1 Rectangular “Bet One Credit” button. 1 Rectangular “Play 5 Credits” button. 1 Rectangular “Deal/Draw” button. 1 Small Square “Change” button.

• Small square buttons with clear caps. • All buttons have white legends and black print, except the “Change” button, which has a red legend and white print. • Fitted with -86 6.3V lamp, 6 or 12V white led. • Set includes: 1 “Change” button. 1 “Cash Out” button. 1 “Bet one” button. 1 “Max Bet” button. 1 “Deal/Draw” button. 5 “Hold/Cancel” Buttons.

Players Edge Plus Slant Top Replacement Button Sets

High Quality Replacement CRT Monitors for IGT• Built with Automatic Colour Adjustment so every monitor displays the same. • Includes a high efficiency switching mode power supply. • Engineered to run cool - without a fan. • Designed for easy maintenance. • Service manuals are clear and helpful.

• Large and small square buttons with clear caps, white legends and black print. • Fitted with -555 6.3V lamps, 6 or 12V led. • Fits IGT S-Plus machines 1995 to present. • Set includes: 1 Large Square “Spin reels” button. 1 Large Square “Play Max Credits” button. 1 Small Square “Bet One Credit” button. 1 Small Square “Change” button. 1 Small Square “Cash/Credit” button.

Part no. DescriptionH77-KIT-100 Button set IGT PE Plus S/T 6.3V lampH77-KIT-106LD Button set IGT PE Plus S/T 6V LedH77-KIT-112LD Button set IGT PE Plus S/T 12V Led

Part no. DescriptionH77-KIT-300 Button set IGT S Plus U/R 6.3V lampH75-KIT-306LD Button set IGT S Plus U/R 6V LedH75-KIT-312LD Button set IGT S Plus U/R 12V Led

Part no. DescriptionH77-KIT-200 Button set IGT PE Plus U/R 6.3V lampH77-KIT-200L Button set IGT PE Plus U/R 6V LedH77-KIT-212LD Button set IGT PE Plus U/R 12V Led

Part no. DescriptionH77-KIT-700 Button set IGT Game king 14V lampH77-KIT-706LD Button set IGT Game king 6V LedH77-KIT-700L Button set IGT Game king 12V Led


150MG4022 14” 1493 Flat top mon. with touch screen & controllerfor IGT games

150MG4013 14” VGA Mon. with touch screen for IGT game King

150MG4051 17” Mon. with touch screen & controller for IGT slant top games

150MG4050 17” VGA Mon. with touch screen & controller for IGT I-series games upright

150MG4019 20” VGA Mon. for IGT game King upright

Game King Upright Repl. Button Sets• Small square buttons with clear caps. • All buttons have white legends and black print, except the “Change” button, which has a red legend and white print. • Fitted with -73 14V lamp, 6 or 12V white led. • Set includes: 1 “Change” button. 1 “Cash out“ button. 1 “Bet one” button. 1 “Max Bet” button. 1 “Deal/Draw” button. 5 “Hold/Cancel” Buttons

Mylar Overlay for IGT Nexgen Player Tracking System• Mylar overlay with copper tape for grounding for IGT Nexgen Player Tracking System using that uses the Hitachi 6.2” LCD panel TX16D11VM2CAA.

Part no. DescriptionH91-1059-00 Mylar overlay for IGT Nexgen Player Tracking system

Cold Cathode for IGT Nexgen Player Tracking System• For use with Hitachi 6.2” LCD panel. • Rated at 70.000 hours. • With wiring harness. • Sold in multiples of 10.

Part no. DescriptionH91-1056-00 Cold cathode with wiring

LCD Panel with Touch Screen for IGT Nexgen Player Tracking System• LCD panel with touch screen for IGT Nexgen Player Tracking System using Hitachi 6.2” panel TX16D11VM2CAA.


H91-1060-00 LCD panel with touch screen for IGT Nexgen Player Tracking system

Touch Screen for IGT Nexgen Player Tracking System• Replacement 4-wire touch screen for IGT Nexgen Player Tracking System using that uses the Hitachi 6.2” LCD panel TX16D11VM2CAA. • Also used by Aristocrat, Konami and multimedia Gaming.

Part no. DescriptionH91-1058-00 Touch screen for IGT Nexgen Player Tracking system

W W W . S U Z O . C O M 155


• Complete with touchscreen, controller and bezel. • Avp ( 25 pin ).

17” LCD Upgrade Kit for IGT Upright ( 25 pin )

Part no. DescriptionH49-5110-00 17” Avp upright kit

LCD Upgrade kits for IGT • Update your older machines with a modern look.• Made from quality components including Samsung LCD panels that offer better picture quality, balanced picture image and a longer life span with no burn-in. ( which is typically found with traditional CRT monitors ) • Kits are drop in replacements for 17"and 19" CRT monitors in upright and slant top cabinets. • Available with 19 or 25 pin connection ( non-avp or avp • Includes touchscreen, controller and bezel.

LCD Upgrade Kits for Players Edge

Widescreen LCD Monitors

• LCD upgrades for IGT players edge and players edge plus. • Replace the old 14” CRT monitor with a 15” LCD. • Premium panels with 150 or 178 degrees viewing angle. • Includes bezel for easy installation. • Kits are direct replacements and can be installed in minutes. • Protective glass mounted to protect LCD panel.

• For all IGT cabinets with widescreen monitors. • Direct replacements, can be installed in minutes. • Touchscreen included. • USB connection.

• LCD with mounted glass. • IGT ref. 69951010.

19” LCD Monitor for IGT Trimline

Part no. DescriptionH49-0297-00 19” Lcd / glass Trimline

17” LCD Upgrade for IGT Slant Top (19 pin)

17” LCD Upgrade for IGT Upright (19 pin)

• Complete with touchscreen, controller and bezel. • Non-avp ( 19 pin ). • IGT ref. 69920401 / 69920000. • Available in 2 models, for machines with standard board 75703800 / 75703900 or for machines with the IGT 044 board.

• Complete with touchscreen, controller and bezel. • Non-avp ( 19 pin ). • IGT ref. 69920901 / 69919201 and 69919401. • Available in 2 models, for machines with standard board 75703800 / 75703900 or for machines with the IGT 044 board.

Part no. DescriptionH49-2827-00 17” IGT S/T non-avp standardHCPA5051 17” IGT S/T non-avp for IGT 044 boards

Part no. DescriptionH49-2694-00 17” IGT Upr. non-avp standardH49-9731-00 17" IGT Upr. non-avp for IGT 044 boards

Part no. DescriptionH49-2792-00 19” IGT S/T kit non-avp standardHCPA5097 19” IGT S/T kit non-avp for IGT 044 boards

Part no. DescriptionH49-12404-00 20.1” LCD monitor with touchH49-12562-00 22” LCD monitor with touch

19” LCD Upgrade for IGT Slant Top ( 19 pin )• Complete with touchscreen, controller and bezel. • Non-Avp ( 19 pin ). • Available in 2 models, for machines with standard board 75703800 / 75703900 or for machines with the IGT 044 board.

19” LCD Upgrade Kit for IGT Game King+ Upright ( 25 pin )• Complete with touchscreen, controller and bezel. • Avp ( 25 pin ). • IGT ref.no. 69926502

If you need any assistance to find the right upgrade kit for your machines,

please contact our sales department.

Part no. DescriptionH49-2713-00 19” Avp upright kit

19” LCD Upgrade Kit for IGT Upright ( 19 pin )• Complete with touchscreen, controller and bezel. • Non-avp ( 19 pin ). • IGT ref. 69922300. • Available in 2 models, for machines with standard board 75703800 / 75703900 or for machines with the IGT 044 board.

Part no. DescriptionH49-2680-00 19” IGT Upr. non-avp standardHCPA5020 19” IGT Upr. non-avp for IGT 044 boards

19” LCD USB Touchmonitor for IGT Trimline• Complete with touchscreen, controller and bezel. • IGT ref. 69950903W / 69950904.

Part no. DescriptionH49-0310-00 19” Lcd touchmonitor Trimline

• Complete with touchscreen, controller and bezel. • Avp ( 25 pin ).

19” Upgrade Kit for IGT Slant Top ( 25 pin )

Part no. DescriptionH49-2720-00 19” Avp slant top kit


H49-11326-00 15” LCD upgrade players edge upright with 178 degrees viewing angle

H49-11176-00 15” LCD upgrade players edge upright with 150 degrees viewing angle

H49-14029-00 15” LCD upgrade players edge slant top with 150 degrees viewing angle


Gaming Catalogue

• Pushbutton is supplied without legend and lens cap. • LED included.

• 6.2″ LCD panel for Konami Casino Management System (KCMS).

Part no. Description125-0010 Pushbutton only (no lens or legend plate)125-0011 Legend plate (no text)125-0012 Lens cap

Replacement PushbuttonLCD Display for Player Tracking

• Includes touchscreen and controller. • Premium PVA panels with wide viewing angle. • Bezel included for easy installation.

LCD Upgrade Kits for Konami


H49-2637-00 17” LCD upgrade kit for Konami upright for konami 530002

H49-2430-00 19” LCD upgrade kit for Konami slant topH49-12247-00 19” LCD upgrade kit for Konami top unitH49-0237-00 19” LCD upgrade kit replaces KT-LS19E4H49-12881-00 22” LCD for Konami widescreen games

LED Edge-Lit Panel for Konami Belly Glass• Replacement for all Konami belly glass that is currently edge-lit with cold cathode lamps.• Powered by 12 volts directly, so there is NO inverter, ballast or adapter needed.• Just plug the power cord directly into the existing Molex connector that currently provides 12 volts of power to the CCFL inverter.• LED’s will not break when the Drop Crews let the door drop and then slam it closed.

Part no. DescriptionH91-3161-00 LED edge-Lit panel for Konami Belly glass

Cold Cathode for Konami Machines• Dual cold cathode lamp assembly for Konami slot machines with a 17” LCD monitor. • Wiring harness and connectors included. • Lamps rated at 70.000 hours

Part no. DescriptionH91-1654-00 Cold Cathode for Konami machines

Cold Cathode for Konami Denomination Panel• Single cold cathode assembly for Konami upright video denomination backlit panel. • Includes wiring and connector. • Rated at 70.000 hours

Part no. DescriptionH91-1831-00 Cold Cathode for Konami denomination panel

Cold Cathode for Konami Slots• For Konami slot machines with cold cathode edge-lit belly glass. • Dual 70.000 hour cold cathode lamp assembly • Includes one aluminium encased dual output 12V Piezo matching inverter. • Lamp assembly includes wire harness, silicone end caps and connectors attached.

Part no. DescriptionH91-1379-00 Cold Cathode for Konami slots

Part no. DescriptionH49-9046-00 6.2″ LCD panel

Cold Cathode for Konami Belly Glass and Konami Games • Single raw cold cathode lamp for Konami belly glass that is backlit with cold cathode lamps. • Single raw cold cathode for Konami games with 19” Kortek LCD monitors. • No wiring or connectors included. • Rated at 70.000 hours.

Part no. DescriptionH91-2146-00 Cold Cathode for Konami Belly GlassH91-1954-00 Cold Cathode for Konami Games

SEGA Gaming

Replacement Arm Rest Set for Sega Ascot Special• Holds much longer then traditional armrests. • Made of extremely durable polyurethane material. • Sold as set with 1 centre piece and 2 corners.

Part no. Description119-1005-2 Armrest set Sega Royal Ascot

Cold Cathode Lamp for Bonus LCD• Used in 7” bonus LCD. • U shape CCFL including harness.

Part no. DescriptionH91-1006-15 Cold Cathode

Cold Cathode Lamp for Bonus LCD• Used in 7” bonus LCD. • L shape CCFL including harness.

Part no. DescriptionH91-4561-00 Cold Cathode

H49-0237-00

H49-2430-00

Replacement Parts for Konami / Sega

W W W . S U Z O . C O M 157

Gaming CatalogueReplacement Parts for Novomatic

Part no. Description150TFT0001 19” Touchmonitor Windows NT

19” Slant Top Touchmonitor• For Novomatic Multiroulette. • Windows NT. • Including ELO SAW touchscreen and controller, scratches will not influence the touch function.

Part no. Description150TFT0006 19” Touchmonitor Windows XP

19” Slant Top Touchmonitor• For Novomatic Multiroulette. • Windows XP. • Including ELO capacitive touchscreen and controller.

Part no. Description150TFT0005 Upright monitor set

Novomatic Upright Monitor Set• Complete set for Novomatic (Admiral) upright cabinet. • Set contains a 17” monitor and a 19” touchmonitor for the upgrade of both monitors in the cabinet.

Part no. Description150TFT0002 19” Slant top monitor

19” Slant Top Monitor• For Novomatic Slant top cabinets. • Without touchscreen.

Part no. Description150TFT0003 17” Upright monitor

17” Monitor for Novomatic Upright Cabinet• Used in Novomatic (admiral) machines for top screen (non-touch).

Part no. Description150TFT0004 19” Upright touchmonitor

19” Touchmonitor for Novomatic Upright Cabinet• Used in Novomatic (Admiral) machines. • With ELO SAW touchscreen and controller, scratches will not influence the touch function.


Gaming CatalogueReplacement Parts for Orion

• Used in all hoppers.Part no. Description Orion Ref.14-0281 Hopper knife 15820003

Hopper Knife

• Used in all hoppers.

Part no. Description Orion Ref.14-1140 Hopper sensor 81020451

Hopper Sensor

• Used in all hoppers

Part no. Description Orion Ref.14-1145 Rock and roller assy 81020450

Rock and Roller Assembly

• Used in all hoppers. • Includes bushings.

Part no. Description14-0571 Agitator

Agitator

• Used in all hoppers. • 24Vdc.

Part no. Description14-1115 Hopper motor assy 31 RPM14-1135 Hopper motor assy 21 RPM

Motor

Part no. Description Orion Ref.22-0112 Ballast 27001220

Ballast• Ballast with lampholder used for 7-9 and 11W compact fluorescent lamps.

Part no. Description Orion Ref.22-0105-1 Ballast 8W 2700120522-0106 Ballast 15W 2700120122-0109 Ballast 32W / 40W 27001202

Part no. Description Orion Ref.-9901-7CW 7W lamp 27001124-9901-9CW 9W lamp 27001120-9901-11CW 11W lamp 27001123

Ballast

Compact Fluorescent Lamps

Part no. Description Orion Ref.F8T5CW Fluorescent lamp 8W 27001101F15T8CW Fluorescent lamp 15W 27001102FC32CW Circular lamp 32W 27001121

Compact Fluorescent Lamps

Part no. Description Orion Ref.22-0746 Doorswitch 26500201

Door switch• Double pole doorswitch.

• On-off switchlock. • Keycode 2341.

Switchlock

Part no. Description Orion Ref.H30-1086-01 Switchlock 14022070

• Used in all buttons.

Part no. Description Orion Ref.C9C026-02-ZZZZ 12V LED white 27000114

LED

Oval LoudspeakerPart no. Description Orion Ref.22-0145 Oval loudspeaker 26901003

5” LoudspeakerPart no. Description Orion Ref.22-0140 5” Loudspeaker 26901004

4” LoudspeakerPart no. Description Orion Ref.22-0143 4” Loudspeaker 26901002

Test SwitchPart no. Description Orion Ref.127-26500908 Test switch 26500908

W W W . S U Z O . C O M 159

Gaming CatalogueReplacement Parts for Orion

PushbuttonsPart no. Description Orion Ref.EAGZHAPAZZ1L2 Pushbutton 27 x 27mm 26500526EGGZHAPZZZ1L1 Pushbutton 51 x 33mm 26500533CAGZHAPZZ1EF Pushbutton 51 x 51mm 26500502EBGZHAPAZZ1LF Pushbutton 48 x 48mm 26500522

Part no. Description Orion Ref.22-2204-2 Fan 92x92mm 220Vac 2690497722-2204-11-1 Fan 50x50mm 12Vdc 2690494022-2204-4 Fan 92x92mm 12Vdc 2690495022-2208-90 Finger guard 90mm 1300002922-2208-50 Finger guard 50mm 1243018522-2209-1 Harness for AC fan 18500511

Cooling Fans and Accessories

FutureLogic GEN2 TicketprinterPart no. Description Orion Ref.46-0300 Ticketprinter 26003010

MEI Banknotereader SC8307• Multi width. • RS232.

Part no. Description Orion Ref.M252009031P1 Banknotereader 26003900

MEI Cashbox• SC series Cashbox.

Part no. Description Orion Ref.M252208003P1 Cashbox 27001221

ELO Touchscreen for Orion Cabinets• Available in 17” for slant top and Twinstar cabinet, and 19” for Twinstar II cabinet.

Part no. Description002801A-1700 17” touchscreenE398214 19” touchscreen

ELO Controller for Orion Cabinets• Available for SAW touchscreens as used in Slant Top and Twinstar cabinet or for capacitive touchscreen used in Twinstar II cabinet.

Part no. DescriptionD68054-000 17” Controller E731406 19” Controller

12V PSU for Orion Monitors• Available for 17” or 19” monitors. • Only for use in monitors after 2005 where a 12V power supply has been used.

Part no. Description150-0031 12V 3A for 17” monitor150-0032 12V 5A for 19” monitor

17” Slant Top Touchmonitor for Orion • Samsung wide viewing angle LCD panel for best picture quality. • Including Elo SAW touchscreen and controller. • Drop-in replacement.

Part no. Description Orion Ref.150TFTS1729CE 17” Slant Top Touchmonitor 27300100

17” Slant Top Monitor• Samsung wide viewing angle LCD panel for best picture quality. • Monitor without touchscreen or glass for upper screen. • Drop-in replacement.

Part no. Description Orion Ref.150TFT1728 17” Monitor 27300098

LCD Monitors for Twinstar• For all Twinstar upright models. • Available in 17” and 19”. • Drop in replacement for existing monitors.• Available as complete touchmonitor or monitor with hardened glass.

Part no. Description Orion Ref.150TFTG1728 17” Monitor with glass 27300102150TFTS1728 17” Touchmonitor 27300101150TFTG1924 19” Monitor with glass 27300202150TFTS1924 19” Touchmonitor 27300201

150-0031


Gaming CatalogueReplacement Parts for WMS

6-Digit Meter for WMS Gaming• 6-digit non-reset meter counts up to 600 coins per minute. • Back of panel mounting style. • Ultrasonically welded tamper-proof end cap. • Pulse length: 50 ms min. • Dimensions: .75 W x .125 H. • Power consumption: 5 watts. • Voltage: 6Vdc.

Fluorescent Tubes• Only brand names like Osram, Sylvania or Philips.

Part no. Description-9902-5CW Compact fluorescent lamp

Part no. Description WMS Ref.F8T5CW Fluorescent tube 8W 24-8833F14T8CW Fluorescent tube 14W 24-8836F15T8CW Fluorescent tube 15W 24-8809H91-0716-00 Fluorescent tube 17W 24-010242F18T8K24CW Fluorescent tube 18W 24” 61cm 24-8147H91-0159-00 Circline lamp 22W 24-11504

Compact Fluorescent Lamp• 5 Watts Cool white. • Used in WMS Bluebird.

Miniature LampsPart no. Description WMS Ref.-73 14V 0.08A 24-8880-159 T-3-1/4 6.3V 0.1Amp 24-8768

Part no. Description WMS Ref.H42-7427-00 6-Digit meter for WMS gaming 20-9951

Part no. Description WMS Ref.H70-0315-00 Gas Strut for Williams Slant Top Slots 20-004294

Xenon 591 Bulb• Used on WMS Bluebird tower light. • Wedge base. T3-1/4-10mm• 14V.

Part no. DescriptionH91-1018-00 Xenon 591 bulb

Cold Cathode for WMS Bluebird• Triple cold cathode replacement assembly for WMS Bluebird slots with 17” LCD monitor. • Includes three 70.000 hour cold cathode lamps, attached wire harness, connectors and silicone end caps.

Part no. DescriptionH91-2820-00 Cold Cathode assembly for WMS Bluebird

Cold Cathode Assembly for WMS Bluebird• For use in WMS Bluebird slot machines that use a 18” LCD monitor. • Convenient “plug-n-play” assembly. • 3-cold cathode assembly rated at 70,000 hours. • Wiring harness and connectors included.

Part no. DescriptionH91-1006-10 Cold Cathode assembly for WMS Bluebird

Cold Cathode for WMS Bluebird Bonus Screen• Single lamp assembly for 6.4” LCD (LG #LB064V02) in WMS Bluebird bonus screen. • Includes wiring and connectors. • Rated at 70.000 hours.

Part no. DescriptionH91-1771-00 Cold Cathode for WMS Bluebird bonus screen

LCD Panel for WMS Bluebird Bonus Screen• 6.4” LG LCD panel LB064V02-TD01. • This is the LCD panel for bonus screen. • Excluding touchscreen.

Part no. DescriptionH49-9181-00 6.4″ LCD for WMS bonus screen

Gas Strut for WMS Slant Top Slots• Allows door to be held open without assistance. • Williams old ref no. 20-003068.

Part no. DescriptionH20-10481.1 Ballast

Ballast• Ballast for 15W fluorescent lamps. • Used on WMS Bluebird.

Part no. DescriptionH44-1500-02 Dual lamp ballast

Dual Lamp Ballast• Used in WMS Bluebird. • Input 100-240Vac. • WMS ref.no. 5610-008027-00.

Part no. DescriptionH20-011580-00 Ballast 22W

Ballast• Used in WMS Bluebird. • 22W ballast. • Ref.no. UB905-22.

Touchscreens• Used in WMS cabinets. • For easy identification check 3M part no on existing touchscreen. • 18.87”screen is used on older Bluebird cabinet with Kristel LCD 18-009 / WMS ref.no. A-009807-14. • 19.74” screen is used on newer Bluebird cabinet with Kristel LCD 19-011 / WMS ref.no. A-012506-00-00.

Part no. Description 3M Ref.H49-2296-00 18.87” Touchscreen 17-8351-223H49-2587-00 19.74” Touchscreen 17-8551-223H49-2882-00 20.65” Touchscreen 17-8441-223H49-2883-00 22.37” Touchscreen 17-9311-227

Replacement Parts for Atronic Gaming Catalogue - … Catalogue Replacement Parts for Atronic 17”...

Documents

Transcript of Replacement Parts for Atronic Gaming Catalogue - … Catalogue Replacement Parts for Atronic 17”...