OWNER’S MANUAL

Date of purchase: _____/ _____/ _____

REPLACEMENT CANOPY FOR 9.3' COASTAL GAZEBOProduct code: D71 M25798UPC code: 769455 765000

1

Vendor Item: C-TOSCANA

Caution:This gazebo is made for explicit purpose of providing limited outdoor sun shade and is not to be used as a toy, shelter or tent. This gazebo is not intended for inclement weather in any form including, but not limited to: rain, hail, sleet, snow and/or wind. Do not locate structure near anyopen flame. Do not use structure as a support. Do not shake, lean or climb on structure. Children under age of 10, near the structure, should be supervised by a competent adult at all times.

2

Special WarningAssemble your gazebo on a soft, non-abrasive surface to avoid damage. The gazebo is heavy. Use

care when handling. Assembly by four adults is recommended. The gazebo is not intended to be a

permanent structure. Take it down during high winds or it may be damaged.

KEEP ALL FLAME AND HEAT SOURCES AWAY FROM CANOPY FABRICThe canopy is made with flame-resistant fabric which meets CPAI-84 specifications. It is not

fireproof. The canopy fabric will burn if left in continuous contact with flame source. The

application of any foreign substance to the canopy fabric may render the flame-resistant properties

ineffective.

PARTSRead through all the instructions before beginning assembly. Unpack and identify all the parts. Place them on a flat, non-abrasive surface. Assembly by four people is recommended.

A Wind Vent Canopy

B Large Canopy

C Triangle Support Frame (not include in this package)

D Support Bar (not include in this package)

E Short Canopy Frame (not include in this package)

F Long Canopy Frame (not include in this package) 1

ITEM DESCRIPTION QUANTITY

1

1

4

4

1

3

A

B

C

C

C

C

D

D

D D

E

F

ACCESSORIES

Gf (1)Assembly Instructions Sheet

ASSEMBLY INSTRUCTIONS

1

Ga (8)Bolt

Gb (16)Metal Washer

Gc (8)Nut

Gd(1)Allen Wrench

Ge (2)Open Hex Wrench

4

Repeat procedure for the remaining three triangle support frame C.

Use the following parts from original gazebo Use the following parts from the hardware

Process of removing original gazebo canopy

2

3

5

Repeat procedure for the remaining three support bar D.

Loose the hook and loop velcro.

4

5

6

Remove bolts and nuts from the original medium large canopy frame.

Ga x 4Bolt

Gb x 8Metal Washer

Gc x 4Nut

Ga x 4Bolt

Gb x 8Metal Washer

Gc x 4Nut

Remove remaining bolts and nuts in original large canopy frame.

6

7

7

Remove original wind vent canopy.

8

9

8

Process of replacing new gazebo canopy

10

11

9

Make sure the button fits securely into the hole.

12

13

10

Don’t tighten completely.

Ga x 4Bolt

Gb x 8Metal Washer

Gc x 4Nut

Ga x 4Bolt

Gb x 8Metal Washer

Gc x 4Nut

Don’t tighten completely.

Repeat procedure for the other medium canopy frame bars.

Repeat procedure for the other three llarge canopy frame.

14

15

11

Note: the button on the support bar faces upwords.

Repeat procedure for the other three triangle support frame.Securely tighten all bolts and nuts.

Make sure the button fits securely into the holes.

12

CARE INSTRUCTIONS

Wash with a mild solution of soap and water; rinse thoroughly. Dry completely. Do not use bleach or solvents.

Cover furniture with outdoor furniture covers when not in use.

See our extensive assortment of outdoor living productson-line at www.sears.com and www.kmart.com

Made in / Hech en CHINADistributed by Sears, Roebuck and Co., Hoffman Estates, IL 60179

For questions or comments about product:Call toll-free: 1-800-457-4652

Please refer to part numbers when reordering

Now your gazebo is ready for use.

16