Rental and Pump Catalog
16
Midwest Hose & Specialty, Inc. Rental & Pump Catalog Keeping the Industry Connected
Transcript of Rental and Pump Catalog
Midwest Hose & Specialty, Inc.Rental & Pump Catalog
Keeping the Industry Connected
Suction Hose
2
TEST DOCUMENTATION
inch inch
Smooth
Cover
Corrugated
Cover
More Flexible
ID OD
inch
Bend
Radius
psi in./HG
Max WPItem Suction
lbs/ft feet
Weight
Coil
Length
10020030
Full Vacuum
Wr
3/41
1-1/41-1/2
2342346
1.191.471.802.082.583.614.612.603.664.656.85
3.54.35.36.39.3
13.217.39.2
13.417.325.8
0.580.620.891.111.472.343.061.522.533.237.09
ORDERSPEC SHEET
CHEMUHMW200-32 2” ID200 PSI W.P.
-40° to 250° F -40° to 121° CUHMW CHEM
SUCTION & DISCHARGE
ORDERSPEC SHEET
CHEMUHMWC200-64 4” ID200 PSI W.P.
-40° to 250° F -40° to 121° CUHMW CHEMICAL CORRUGATED
SUCTION & DISCHARGE
Part Number CHEMUHMW200-XX
Part Number CHEMUHMWC200-XX
-40° F to 250° F
Chemical 200 PSILightweight chemical transfer hose designed for almost every common industrial chemical used in industry today (98% of chemicals) without staining / contamination.
UHMW handles a wider variety of chemicals than XLPE at virtually the same cost.
Tube UHMW Cover EPDMReinforcement Multiple textile plies, dual helix wireSafety Factor Minimum 3 to 1
C
W
TEST DOCUMENTATION
inch inch
ID OD
inch
Bend
Radius
psi in./HG
Max WP Suction
lbs/ft feet
Weight
Coil
Length
150
100
30 Full
Vacuum
Wr
1-1/223468
1012
1.862.363.544.546.689.00
11.2713.27
6.08.0
14.018.028.040.050.060.0
0.600.761.442.253.948.68
15.8018.63
100
654020
Rubber Water SuctionDesigned for water, salt water, and mild acids such as water based agricultural fertilizers.
Tube EPDM Cover EPDMReinforcement Multiple textile plies, dual helix wireSafety Factor Minimum 3 to 1
NOTE 10” size is corrugated for greater flexibility
-40° F to 180° F
W
Camlock Type C Stainless Schedule 40 TEE LD FerrulesFoot Valve
with StrainerKC Nipple
Popular Assemblies Camlocks 2” UHMW20032-SL2750-A32CAMC-A32CAME-20FT-TVM 3” UHMW20048-SL3750-A48CAMC-A48CAME-20FT-TVM4” UHMW20064-SL4750-A64CAMC-A64CAME-20FT-TVMPopular Assemblies Fixed x Float4” UHMW20064-SL4750-464FL150-464FF150-20FT-TVM
Popular Assemblies Camlocks2” BRS15032-LD2688-A32CAMC-A32CAME-25FT-TVM, 20FT3” BRS15048-LD3688-A48CAMC-A48CAME-25FT-TVM4” BRS15064-LD4688-A64CAMC-A64CAME-20FT-TVM6” BRS15096-LD6938-A96CAMC-A96CAME-20FT-TVM8” BRS150128-LD9500-A128CAMC-A128CAME-20FT-TVMPopular Assemblies Bauers6” BRS15096-LD6938-96BBHDM-96BBHDF-20FT-TVM
BRS150160-LD11750-160BAHDM-160BAHDF-10FT, 20FT BRS150192-LD14000-192BAHDM-192BAHDF-10FT, 20FT
ORDERSPEC SHEET
MWHBRS150-64 4” ID150 PSI W.P.
-40° to 180° F -40° to 82° CBLACK RUBBER SUCTION
SUCTION & DISCHARGE
Part Number MWHBRS150-XX
10”12”
3
Suction Hose
TEST DOCUMENTATION
inch inch
ID OD
inch
Bend
Radius
psi in./HG
Max WP Suction
lbs/ft feet
Weight
Coil
Length
15030
Full Vacuum
1-1/41-1/2
22-1/2
3468
1.691.932.482.993.504.566.738.79
6.06.79.8
12.215.020.124.032.0
0.700.781.101.461.862.714.817.82
100100
100/200100
100/200100/200
10060
Wr
ORDERSPEC SHEET
MWHTT150-64 4” ID150 PSI W.P.
-40° to 180° F -40° to 82° CTANK TRUCK
SUCTION & DISCHARGE
Tank Truck 150 PSIDesigned to handle diesel, ethanol, gasoline, oil, and petroleum based products that has up to 50% aromatics.
Tube Nitrile (NBR) Cover Neoprene (CR)Reinforcement Multiple textile plies, dual helix wireSafety Factor Minimum 3 to 1
Part Number MWHTT150-XX
-40° F to 180° F
O&G
W
Popular Assemblies Camlocks2” TT15032-SL2688-A32CAMC-A32CAME-10FT-TVM, 20FT3” TT15048-SL3688-A48CAMC-A48CAME-10FT-TVM, 20FT4” TT15064-SL4688-A64CAMC-A64CAME-10FT-TVM, 20FT6” TT15096-SL6938-A96CAMC-A96CAME-10FT-TVM, 20FT8” TT150128-SL9000-A128CAMC-A128CAME-10FT-TVM, 20FTPopular Assemblies Bauers4” TT15064-SL4688-64BBHDM-64BBHDF-10FT-TVM, 20FT 6” TT15096-SL6938-96BBHDM-96BBHDF-10FT-TVM, 20FT8” TT150128-SL9000-128BBHDM-128BBHDF-10FT-TVM, 20FTPopular Assemblies Fixed x Float4” TT15064-LD4688-64FL150-64FF150-20FT-TVM6” TT15096-LD6938-96FL150-96FF150-20FT-TVM
Heavy DutyNotched KC Nipple
Fixed or FloatingFlanged End
Heavy DutyFlange Gaskets
150# Flangex Figure 206 Adapters
TEST DOCUMENTATION
inch inch
ID OD
inch
Bend
Radius
psi in./HG
Max WP Suction
lbs/ft feet
Weight
Coil
Length
30030
Full Vacuum
23468
10
100/200
1006040
1.402.363.459.52
10.2015.0
9.113.217.320.030.050.0
2.563.624.706.899.06
11.22
Wr
ORDERSPEC SHEET
MWHTT300-96 6” ID300 PSI W.P.
-40° to 180° F -40° to 82° CHEAVY DUTY TANK TRUCK
SUCTION & DISCHARGE
Tank Truck 300 PSIDesigned to handle diesel, ethanol, gasoline, oil, and petroleum based products that has up to 50% aromatics.
Corrugated construction gives the hose greater flexibility.
Tube Nitrile (NBR) Cover Neoprene (CR)Reinforcement Multiple textile plies, dual helix wireSafety Factor Minimum 3 to 1
Part Number MWHTT300-XX
-40° F to 180° F
O&G
W
Popular Assemblies Fixed x Float3” TT30048-LD3750-48FL150-48FF150-50FT-TVM 4” TT30064-LD4750-64FL150-64FF150-50FT-TVM, 20FT 6” TT30096-LD7063-96FL150-96FF150-50FT-TVM, 10FT8” TT300128-SL9250-128FL150-128FF150-10FT-TVM, 20FT 10” TT300160-SL1175-160FL150-160FF150-10FT-TVM, 20FT12” TT300192-SL1350-192FL150-192FF150-10FT-TVM, 20FT
CL Coupler x HoseShank 90° Camlocks
Suction Hose
4
Popular Assemblies Fixed x Float4” MWHTT250-64-FFX-20FT-TVM6” MWHTT250-96-FFX-10FT-TVM, 20FT8” MWHTT250-128-FFX-10FT-TVM, 20FT10” MWHTT250-160-FFX-10FT-TVM, 20FT12” MWHTT250-192-FFX-10FT-TVM, 20FT
Popular Assemblies Camlocks2” EPDMGS32-SL2563-A32CAMC-A32CAME-20FT, 25FT, 50FT3” EPDMGS48-SL3750-A48CAMC-A48CAME-20FT, 25FT, 50FT4” EPDMGS64-SL4813-A64CAMC-A64CAME-20FT, 25FT, 50FT
Spiral ClampsBauers Style
Quick ConnectsRound and Square
Hole StrainersCamlock C and
Camlock E CamlocksQuick Opening
Gate Valve
TEST DOCUMENTATION
11-1/2
2346
1.341.962.493.604.696.86
806060504535
4
9121727
0.230.490.691.031.813.84
inch inch
ID OD
inch
Bend
Radius
psi in./HG
Max WP Suction
lbs./ft. ft.
Weight
Coil
Length
10028
20
Wr
EPDM SuctionLightweight, flexible, rugged suction/discharge hose that has good chemical resistance. Excellent for transferring fertilizer solutions, septic solutions, and pesticides. Hose remains flexible in sub-zero temperatures. Helix serves as a scuff strip.
Tube EPDM Cover EPDM/Green SpiralReinforcement Green polyethylene helixSafety Factor Minimum 3 to 1
-30˚ F to 140˚ F
C
W
ORDERSPEC SHEETPart Number EPDMGS-XX
ORDERSPEC SHEET
MWHTT250-160-FFX 10” ID250 PSI W.P.
-40° to 180° F -40° to 82° CHEAVY DUTY TANK TRUCK
MEETS USCG 33CFR 154.500
TEST DOCUMENTATION
inch inch
ID OD
inch
Bend
Radius
psi in./HG
Max WP Suction
10ft Assy 20ft Assy
WeightWeight
25030
Full Vacuum
WWr
468
101214
4.706.899.06
11.2213.5615.80
2036486072
100
-----257397781
10061258
196396515
103714271547
Tank Truck 250 PSI Built-In
Fixed x Floating FlangeDesigned to handle diesel, ethanol, gasoline, oil, and petroleum based products that has up to 50% aromatics. Used as a heavy duty suction and discharge dock hose.
Meets USCG and RMA Class II Requirements. ANSI 150# carbon steel flanges coated in rubber for saltwater protection.
Part Number MWHTT250-XX-FFX
Tube Nitrile (NBR) Cover Neoprene (CR)Reinforcement Multiple textile plies, heavy gauge wire helix. Safety Factor Minimum 3 to 1
-40° F to 180° F
O&G
W
5
Suction Hose
TEST DOCUMENTATION
11-1/41-1/2
22-1/2
346
1.271.561.822.362.903.444.526.80
9090907065555045
345689
1324
.27
.36
.47
.66
.921.201.874.56
inch inch
ID OD
inch
Bend
Radius
psi in./HG
Max WP Suction
lbs./ft. ft.
Weight
Coil
Length
10028
Wr
ORDERSPEC SHEET
ORDERSPEC SHEET
Clear/Green PVC SuctionEconomical general service suction and discharge hose used for pumping water and light chemical solutions. PVC helix increases flexibiility and abrasion resistance while the smooth interior provides maximum flow.
Tube PVC Cover PVCReinforcement Rigid poly helixSafety Factor Minimum 3 to 1 -10˚ F to 130˚ F
Part Number CS-XX
Part Number GS-XX
W
TEST DOCUMENTATION
28
25
inch inch
ID OD
inch
Bend
Radius
psi in./HG
Max WP Suction
lbs/ft feet
WeightCoil
Length
100
100/60/20
30 Full
Suction
23468
1012
2.623.714.807.179.33
11.6313.66
1001007570704028
467
10162545
0.711.141.753.905.568.68
10.30
25/202020
Wr
ORDERSPEC SHEET
Clear with Orange
Helix Water SuctionDesigned for applications that require the hose to slide easily or require visual confirmation of material flow. Great for pumping water and light chemical solutions. Popular with pumping equipment because it handles suction discharge uses.
Tube Double ply PVC Cover Rigid PVC helixReinforcement Polyester braid and PVC helixSafety Factor Minimum 3 to 1
-4˚ F to 150˚ F
Part Number COHWS-XX
W
Popular Assemblies Camlocks COHWS32-SL2750-A32CAMC-A32CAME-10FT-TVM, 20FT COHWS48-SL3750-A48CAMC-A48CAME-10FT-TVM, 20FT COHWS64-SL4888-A64CAMC-A64CAME-10FT-TVM, 20FT COHWS96-SL7438-A96CAMC-A96CAME-10FT-TVM, 20FT COHWS128-SL9500-A128CAMC-A239CAME-10FT-TVM, 20FTPopular Assemblies Bauers COHWS64-SL4888-64BBHDM-64BBHDF-10FT-TVM, 20FT COHWS96-SL7438-96BBHDM-96BBHDF-10FT-TVM, 20FT COHWS128-SL9500-128BBHDM-128BBHDF-10FT-TVM, 20FT COHWS160-SL11750-160BAHDM-160BAHDF-10FT-TVM, 20FT COHWS192-SL14000-192BAHDM-192BAHDF-10FT-TVM, 20FT
Popular Assemblies Camlocks2” GS32-CG-A32CAMC-A32CAME-20FT3” GS48-CG-A48CAMC-A48CAME-20FT4” GS64-CG-A64CAMC-A64CAME-20FTPopular Assemblies Pin Lugs2” GS32-CG-A32PLM-A32PLF-20FT 3” GS48-CG-A48PLM-A48PLF-20FT 4” GS64-CG-A64PLM-A64PLF-20FT
Popular Assemblies MP x Female Cam with Strainer2” GS32-CS-32KC-A32CAMC-20FT+STR-RH2003” GS48-CS-48KC-A48CAMC-20FT+STR-RH3004” GS64-CS-64KC-A64CAMC-20FT+STR-RH4006” GS96-CS-96KC-A96CAMC-20FT+STR-RH600Popular Assemblies Plated MP x Female Pin Lug with Strainer2” GS32-CS-P32KC-A32PLF-20FT+STR-RH2003” GS48-CS-P48KC-A48PLF-20FT+STR-RH3004” GS64-CS-P64KC-A64PLF-20FT+STR-RH4006” GS96-CS-P96KC-A96PLF-20FT+STR-RH600
2”3”4”6”8”
4”6”8”
10”12”
Suction Hose
6
TEST DOCUMENTATION
inch inch
ID OD
inch
Bend
Radius
psi in./HG
Max WP Suction
lbs/ft feet
WeightCoil
Length
10030
Full Vacuum
Wr
22-1/2
34
600
500
2.663.163.72
5
14303648
1.933.284.105.32
ORDERSPEC SHEET
MWHMPSARC-64 4” ID500 PSI W.P.
-40° to 250° F -40° to 121° CMULTIPURPOSE SUCTION
SUCTION & DISCHARGE
-40° F to 250° F
Multipurpose SuctionDesigned for air-operated construction equipment and tank truck service.
Tube Nitrile RMA Type ACover Corrugated Special Abrasion Resistant CoverReinforcement 1, 2, or 3 wire braids Safety Factor Minimum 3 to 1
TEST DOCUMENTATION
500
inch inch
ID OD
inch
Bend
Radius
psi in./HG
Max WP Suction
lbs/ft feet
Weight
Coil
Length
100
25
15
10
3/41
1-1/41-1/2
22-1/2
34
1.281.551.802.212.663.163.725.00
68
101214303648
0.410.801.021.431.933.284.105.32
800
600
Wr
ORDERSPEC SHEET
TTWIRE BRAID AIR-64 4” ID500 PSI W.P.
-40° to 180° F -40° to 82° CTANK TRUCK
SUCTION & DISCHARGEMWHYW600-32600 PSI W.P.
-40° to 250° F -40° to 121° CYELLOW WIRE AIR
SUCTION & DISCHARGE
-40˚ F to 212˚ F
Yellow Wire Braid AirDesigned for air-operated construction equipment, can handle oil mist from compressors. The standard for heavy duty rock drilling.
Tube Nitrile / SBR blendCover Neoprene / SBR blendReinforcement 2 wire braids Safety Factor Minimum 3 to 1
Part Number MWHMPARC-XX
Part Number MWHYWX00-XX
O&G
F
A
A
W
W
Whip Sock andWhip Checks
HD Stemand Ferrule
Ground JointCouplings
2, 4, and 6 Bolt Clamps
CrowsfootCouplings
Popular Assemblies Ground Joints2” YW32-BC-32GJF-32GJF-25FT-TVM, 50FT, 100FT 3” YW48-BC-48GJF-48GJF-25FT-TVM, 50FT, 100FT
Popular Assemblies Male Pipe3” MPSARC48-HD-48MPHD-48MPHD-10FT, 15FT, 20FT 4” MPSARC64-HD-64MPHD-64MPHD-10FT, 15FT, 20FT
7
Discharge Hose
TEST DOCUMENTATION
81012
0.1650.1610.157
0.1650.196
inch inch
ID
Wall
Thickness
0.7%1.0%1.0%
0.5%0.5%
at WP
14191063667
18942462
lbs./660 ft. feet
Elongation WeightReel
Length
200
25046
psi
Max WP
150
660
W
TPU Layflat HoseDesigned for produced water/fresh water transfer. Typically used for hydraulic fracture water transfer, to replace damaged hydrant lines, or to replace a broken water main. Manufactured with NSF standard 61 approved materials for use with potable water. Custom hose color and branding available on big volume orders.
Construction Polyurethane Extruded Through the Weave and a Circular Polyester Woven Reinforcement. No use of glues or adhesives.Safety Factor Minimum 2.25 to 1
-40° F to 180° F
ORDERSPEC SHEET
MWHPOLYTW200-160 200 PSI W.P.
Woven Polyester ReinforcementExtruded Tube and Cover
Part Number MWHPOLYTW200-XXX
• Cast Aluminum A356-T6• Machined with knurled texture to thoroughlyengage hose between stem and clamp• Anodized for abrasion/corrosion
Grooved StemField Attachable
LAYGST
• Cast Aluminum A356-T6• Machined with knurled texture to thoroughly engage hose between stem and clamp• Anodized for abrasion/corrosion• Safety lock avoids accidental uncoupling• Gasket in stem for leak-tight seal
Storz StemField Attachable
LAYST2SET
• Gasket in stem for leak-tight seal
• Grooved or Storz Stem• Cast Aluminum A356-T6• Anodized for abrasion/corrosion• SS bolts for longevity• Lightweight, rounded
ClampField Attachable
LAYGHC
• Assembled onto pipe without disassemblying the bolts, nuts, and housing• Speedier installation than normal groovedclamps• Push onto grooved fitting end, join by asecond grooved fitting end, then tightenbolts and nuts
Grooved ClampQuick Release
LAYGCR
Lining Properties
Ultimate Tensile Strength no less than 1200 psiUltimate Elongation when tested to UL-19 guidelines a small dumbbell sample of lining elongates a minimum of 400%
Resistance
Abrasion 25mm3 on DIN 53516/ISO4649 testing, up to 5 times more resistant and 50% more puncture resistant than Nitrile/PVCCold Remains flexible in as low as -40° F conditionsOzone No cracking in lining or cover when tested to ASTM D518 Procedure B (100 pphm/118°F/70 hours)Chemical Resistant to most chemicals and petroleum products
Discharge Hose
8
Warflex Through the WeaveA more economical alternative to our polyurethane layflat hose. Warflex is reinforced with high–tenacity polyester yarn and coated through the weave with a 70% nitrile rubber / 30% PVC blend for good chemical resistance for produced water. Less abrasion resistance and puncture resistance. Custom hose color and branding available on big volume orders.
Construction Nitrile/PVC Blend Extruded Through the Weave and a Circular Polyester Woven Reinforcement. No use of glues or adhesives.Safety Factor Minimum 2.25 to 1
Lining Properties
Ultimate Tensile Strength no less than 1200 psiUltimate Elongation when tested to UL-19guidelines a small dumbbell sample of lining elongates a minimum of 400%
Resistance
Ozone No cracking in lining or cover when tested to ASTM D518 Procedure B (100 pphm/118°F/70 hours)Chemical Resistant to most chemicals and petroleum products
ORDERSPEC SHEET
MWHWARFLEX 150-128 200 PSI W.P.
Part Number MWHWARFLEX•••-XXX
-4° F to 176° F
TEST DOCUMENTATION
468
1012
0.0930.0850.079
0.1120.126
150175200
150150
Available upon request
inch inch
ID
Wall
Thickness
0.640.450.27
1.111.88
lbs./660 ft. feet
WeightReel
Length
23
psi
Max WP
660, 100, and 50 foot
lengths
W
Popular Assemblies Camlocks2” WARFLEX32-SL2375-A32CAMC-A32CAME-50FT-TVM3” WARFLEX48-SL3375-A48CAMC-A48CAME-50FT-TVM4” WARFLEX64-SL4375-A64CAMC-A64CAME-50FT-TVM6” WARFLEX96-SL6500-A96CAMC-A96CAME-50FT-TVM8” WARFLEX128-SL8500-A128CAMC-A128CAME-50FT-TVMPopular Assemblies Bauers4” WARFLEX64-SL4375-64BBHDM-64BBHDF-50FT-TVM6” WARFLEX96-SL6500-96BBHDM-96BBHDF-50FT-TVM8” WARFLEX128-SL8500-128BBHDM-128BBHDF-50FT-TVMPopular Assemblies Grooved6” WARFLEX96-SL6500-96KCG-96KCG-50FT-TVM
MWHWARFLEX 150-128 200 PSI W.P.
MWHWARFLEX 150-128 200 PSI W.P.
MWHWARFLEX 150-128 200 PSI W.P.
Custom Hose Colors
Flow MetersGrooved/StorzSplitter Valves
Grooved x Class150 Flange
Grooved Y, Parallel YLateral Y
PiggingProducts
9
Discharge Hose
Layflat DischargeGeneral purpose hoses for open end discharge. Non-absorbing, mildew proof, and rolls up flat for easy storage and handling. Common in construction, agriculture, irrigation, marine, and rental applications PVC hoses resistant to oils, grease.
Tube and cover are extruded simultaneously to achieve maximum bonding.Reinforcement Polyester yarn
TEST DOCUMENTATION
11-1/41-1/2
22-1/2
3468
1-1/223468
.052
.056
.059
.059
.059
.063
.067
.075
.087
.079
.087
.095
.102
.119
.134
110
80
6580706035
150
12511570
300
300
inch
IDHosesWall
Thickness
Minimum3 to1
Blue
Gray
PVC
Standard
Duty
Red
Yellow
PVC
Heavy
Duty
Minimum3 to1
psi
Max WP
psi ft.
Burst
Roll
Length
Blue or Gray PVCStandard DutyBD-XX or GD-XX
Red or Yellow PVCHeavy DutyREDHD-XX or YELHD-XX
-5° F to 170° F
-5° F to 170° F
W
Popular Assemblies Camlocks2” BD32-CG-A32CAMC-A32CAME-25FT, 50FT, 100FT 3” BD48-CG-A48CAMC-A48CAME-25FT, 50FT, 100FT4” BD64-CG-A64CAMC-A64CAME-25FT, 50FT, 100FT2” GD32-CG-A32CAMC-A32CAME-25FT, 50FT, 100FT3” GD48-CG-A48CAMC-A48CAME-25FT, 50FT, 100FT4” GD64-CG-A64CAMC-A64CAME-25FT, 50FT, 100FT2” REDHD32-CG-A32CAMC-A32CAME-25FT, 50FT, 100FT3” REDHD48-CG-A48CAMC-A48CAME-25FT, 50FT, 100FT4” REDHD64-CG-A64CAMC-A64CAME-25FT, 50FT, 100FT2” YELHD32-CG-A32CAMC-A32CAME-25FT, 50FT, 100FT3” YELHD48-CG-A48CAMC-A48CAME-25FT, 50FT, 100FT4” YELHD64-CG-A64CAMC-A64CAME-25FT, 50FT, 100FTPopular Assemblies Pin Lugs2” BD32-CG-A32PLM-A32PLF-25FT, 50FT, 100FT3” BD48-CG-A48PLM-A48PLF-25FT, 50FT, 100FT4” BD64-CG-A64PLM-A64PLF-25FT, 50FT, 100FT
Pin-Lug Hose Ends
Camlock C and Camlock E Camlocks
Adjustable Hydrant Wrenches and Spanner Wrenches
Brass HydrantAdapters Nozzles
Discharge Hose
10
-40° F to 180° F
WW
Contractors Water
AssembliesCoupled Male x Female with brass Garden Hose Threads. Designed for water transfer and wash down.
Contractors Water Assembly
50 foot length
5/8” or 3/4”
CWHBR••-50FTHeated Water Hose w/ Built-inheater to keep from freezing
12’, 25’, 50’, or 100’ lengths
Tested to -42° F
HEATEDWH10-••FT
Double Jacket Mill HoseORDERSPEC SHEET
MILL-24
MILL-32
MILL-40
MILL-48
MILL-64
1.5”
2”
2.5”
3”
4”
ID
250
psiSP
10 lbs.
11.5 lbs.
17 lbs.
21 lbs.
40 lbs.
50’ Uncpld.Weight Per
SizeBowl
1-3/4”
2-1/4”
2-11/16”
3-1/4
4-3/8”
Item
W
ORDERSPEC SHEET
MILLDJ-24
MILLDJ-32
MILLDJ-40
1.5” 12.95 lbs
17.95 lbs
23.6 lbs
2”
2.5”
ID
300
psiSP
50’ Uncpld.Weight Per
SizeBowl
Item
1-13/16”
2-5/16”
2-7/8”
W
Designed for open end discharge applications. Uses include connections to fire hydrants, dust control water trucks, water spraying, and water discharge. Immune to mildew.
Double jacket for rugged environment. Immune to mildew.
Single Jacket Mill Hose
W
W
TEST DOCUMENTATION
inch inch
IDHose
OD
psi
Max WP
lbs/ft feet
Weight
Coil
Length
1-1/22
2-1/23468
101-1/2
22-1/2
3468
1012
1.782.282.783.284.316.318.72
10.421.892.392.893.394.436.438.47
10.5312.53
150
100
100
50
250
200
150
10010080
0.440.620.750.951.252.683.775.000.551.001.331.582.153.254.505.508.00
2 Ply
4 Ply
W
Tube SBR Cover SBRReinforcement Synthetic textileSafety Factor 3 to 1
Ruber Water DischargeDesigned for water discharge in construction, heavy duty equipment rental, and mines and quarries. Soft-wall hose construction provides similar performance to a layflat hose but a higher working pressure and more abrasion resistance.
ORDERSPEC SHEET
MWHWD2PLY-962 PLY WATER
DISCHARGE USE ONLY100 PSI W.P.
-40° to 180° F -40° to 82° C
ORDERSPEC SHEET
MWHWD4PLY-1284 PLY WATER
DISCHARGE USE ONLY150 PSI W.P.
-40° to 180° F -40° to 82° C
Part Number MWHWD4PLY-XX
Part Number MWHWD2PLY-XX
-40° F to 180° F
W
Popular Assemblies Camlocks, Pin Lugs2” MILLDJ32-SL2375-A32CAMC-A32CAME-50FT2” MILLDJ32-SL2375-A32PLM-A32PLF-50FT
Popular Assemblies Camlocks, Pin Lugs2” MILL32-SL2375-A32CAMC-A32CAME-50FT 2” MILL32-SL2375-A32PLM-A32PLF-50FT
Tube EPDM Cover EPDMWorking Pressure 150 PSIReinforcement 2 textile spirals
Tube Single ply synthetic rubberCover PolyesterLength up to 100 feet
Tube Single ply synthetic rubberCover Double jacket polyesterLength up to 100 feet
Popular Assemblies Camlocks2” WD2PLY32-CS-A32CAMC-A32CAME-50FT3” WD2PLY48-CS-A48CAMC-A48CAME-50FT4” WD2PLY64-CS-A64CAMC-A64CAME-50FT6” WD2PLY96-CS-A96CAMC-A96CAME-50FT
11
Discharge Hose
Popular Assemblies KC Nipples, SS Clamps MP30012-CS-12KC-12KC-50FT, 100FT MP30016-CS-16KC-16KC-50FT, 100FT MP20020-CS-20KC-20KC-50FT, 100FT MP20024-CS-24KC-24KC-50FT, 100FT MP20032-CS-32KC-32KC-50FT, 100FTPopular Assemblies Crowfoot, SS Clamps MP30012-CS-12CROWH-12CROWH-50FT, 100FT MP30016-CS-16CROWH-16CROWH-50FT, 100FT MP20020-CS-20CROWH-20CROWH-50FT, 100FT
3/4”1”
1.25”1.5”
2”
3/4”1”
1.25”
A A A A
Air Tool and Jackhammer Assemblies
Air Tool Blue PVC3/8” hose with 1/4” MP
MWHPVC300BU06-04MP-04MP-••FT
50 or 100 foot lengths 50 or 100 foot lengths
Air Tool Red EPDM3/8” hose with 1/4” MP
MWHAT300RD06-04MP-04MP-••FT
50 or 100 foot lengths
Jackhammer Red EPDM3/4” or 1“ hose with crowsfeet
MWHAT300RD••-••CROW-••CROW-••FT
50 or 100 foot lengths
Jackhammer Yellow EPDM3/4” or 1“ hose with crowsfeet
MWHAT300YE••-••CROW-••CROW-••FT
50 or 100 foot lengths
MWHAT300RD06-04MP-04MP-••
A
W
TEST DOCUMENTATION
1/43/81/25/83/4
11-1/41-1/2
2
.62
.71
.841.001.151.431.752.002.55
1.502.25
33.754.57
8.7510.514
.15
.18
.25
.30
.37
.50
.81
.941.12
500500500400400300200200200
inch inch
ID OD
inch
Bend
Radius
psi
Max WP
lbs./ft. ft.
Weight
Reel
Quantity
300
200
Wr
Multipurpose AirDesigned to handle oily mists used to lubricate pneumatic tools. Tube is good for air and oil. Suitable for light agricultural spraying such as diluted solutions of herbicides. NOT for fuels.
Tube EPDM RMA Class CCover EPDMReinforcement 4 textile spiralsSafety Factor 3 to 1
-40° F to 200° F
ORDERSPEC SHEET
MWHMP300-16 1” ID MULTIPURPOSE 300 PSI
Part Number MWHMP300-XX
ORDERSPEC SHEET
MWHPVCAIR300BU06 3/8” ID PVC AIR HOSE LOW OIL RESISTANCEPVC Air 300 PSIGeneral purpose hose that can handle air, water, oil, mist, and mild chemical applications.Tube PVC Cover PVC Reinforcement 2 textile spirals Safety Factor 3 to 1
-10° F to 150° F
TEST DOCUMENTATION
inch inch
ID OD
inch
Bend
Radius
psi
Max WP
lbs./ft. ft.
Weight
Reel
Quantity
Wr
1/43/81/2
0.50.630.78
300 600.09.14.18
1.52.253.00
Part NumberMWHPVCAIR300BUXX
A
W
Composite Hose
12
Why Composite Hose?
Composite HoseCross Reference Guide
Handling & FluidCompatibility Guide
• Light weight and flexible for easier handling• Flexibility retained at low, even cryogenic
temperatures (below -238° F)• Excellent resistance to kinking or crushing• Suction and Discharge use• Up to 100% aromatics, no permeation of gases• All assemblies tested to 1.5 x working pressure• 4 to 1 safety factor• Temp Range -40 to 212° F• Not for dry material service• 10, 20 and 25 foot lengths
Popular Assemblies Fixed x Float CHWATERGG64-C-C64FL150-C64FF150-20FT for water CHWATERGG96-C-C96FL150-C96FF150-20FT for water CHWATERGG128-C-C128FL150-C128FF150-20FT for water CHWATERGG160-C-C160FL150-C160FF150-20FT for water CHWATERGG192-C-C192FL150-C192FF150-20FT for waterPopular Assemblies Male Pipe CHCHEMA6632-632MPP-632MPP-10FT for chemical aggressive CHCHEMA6664-664MPP-664MPP-15FT for chemical aggressivePopular Assemblies Camlocks CHCHEMA6648-648CAMC-648CAMC-20FT for chemical aggressive
Chemical (aggressive)
Used for chemicals, inks, paints, plant processing, rail cars, and tank trucks
Liner poly fabricCover green poly fabricInner Wire SS316Outer Wire SS316,Galvanized optional
1” - 8” 250 psi
Chemical PTFE (premium)
Superior chemical resistance with PTFE liner. Used for chemical, inks, paints, pharmaceuticals, plant processing, rail cars and tank trucks
Liner PTFE fabricCover red poly fabricInner Wire SS316Outer Wire SS316
1” - 8” 250 psi
Chemical
Used for chemicals, inks, paints, plant processing, rail cars, and tank trucks
Liner poly fabricCover black poly fabricInner Wire POuter Wire G
1” - 8” 250 psi
Internal Helical Wire:
• Galvanized Steel• Polypropylene Coated Steel• Stainless Steel
External Helical Wire:
• Galvanized Steel• Stainless Steel
Flanged Ends:
• Carbon Steel• Stainless Steel
Tailpiece:
• Carbon Steel• 316 Stainless Steel• PTFE coated
Ferrule:
• Coated Steel• Stainless Steel
Abrasion & Ozone Resistant Outer CoverMultiple Polypropylene Layers
Seamless TubesMultiple Polypropylene Layers
Polypropylene or Fluoropolymer Inner Layers
Hose Cross Section
C CC
Liner poly fabricCover light blue poly fabricInner Wire GOuter Wire G
Water
Used for water, dirty oily water, and light chemicals common in the pump rental industry.
4”, 6”, 8”, 10” 100 psi
Dry BreakCouplings
Safety BreakawayCouplings
Length
HoseSize
FittingSize #1
CompositeHose
Fitting Material #1A Aluminum6 SS316C CarbonP Poly
Inner WireG GalvanizedP Poly6 SS316
Outer WireG Galvanized6 SS316
Fitting Type #1MPP Male PipeBW150 Pipe Stub End 150#CAMC Camlock Type C FemaleCAME Camlock Type E MaleFL150 Fixed Flange 150#FF150 Floating Flange 150#
FittingSize #2
Fitting Material #2 Fitting Type #2Hose TypeWATER WaterCHEM ChemicalCHEMA Chemical (Aggressive)PTFE Chemical (premium)
CHWATERGG64 - C64FL150 - C64FF150 - 20FT
Figure 206Hammer Union Butterfly ValvesCompanion Flange
4”6”8”
10”12”
2”4”
3”
W
13
Metal Hose
Industrial Hose Assembly Nomenclature
A AluminumB BrassD DuctileY PolypropyleneP PlatedC Carbon6 SS316M Malleable Iron
Some fitting types are only available in one material. For those we don’t specify a material in the assembly nomenclature.
KC KC Nipple P 6 B Y AKCG KC Nipple, Grooved 6KCBW KC Nipple, Buttweld 6KCN Notched Male PipeKCNBW Notched Buttweld 6CAMC Camlock, Type C Female A B D 6 YCAME Camlock, Type E Male A B D 6 YBAM Bauer Type A, MaleBAF Bauer Type A, FemaleBBM Bauer Type B, MaleBBF Bauer Type B, FemaleBAHDM Bauer HD Type A, MaleBAHDF Bauer HD Type A, FemaleBBHDM Bauer HD Type B, MaleBBHDF Bauer HD Type B, FemaleRLM Ring Lock MaleRLF Ring Lock FemaleIM100 Integral Male Figure 100
SL SleeveLD Light Duty FerruleNF Notched FerruleHD HD FerrulesCG Clamp GalvanizedCS Clamp StainlessSC Spiral ClampBC Boss ClampDB Double Bolt
TTC15064-LD4750-A64CAMC-A64CAME-SW-25FT-TVM
TT150 TTC150TTCRED150TT300TTC300TT500OVC150TTCLT150TTR150CPE400UHMWARC400UHMWUHMWCMPSARCYW***HA150BRS150COHWSLWGEPDMGS
Hose Type
Fitting Material #1
4750 4.750” IDRefer to Industrial Hose and Ferrule Best Fit guide for sizes
Ferrule Size04 1/4”06 3/8”08 1/2”10 5/8”12 3/4”16 1”20 1-1/4”24 1-1/2”32 2”48 3”64 4”80 5”96 6”128 8”160 10”192 12”
Hose Size
FittingMaterial #2
FittingSize #2
FittingSize #1
Fitting Type Alloys/Plating Alternatives
Ferrule/Clamp Type
SW Spiral WrapFS Fire SleeveSG Spring GuardNS Nylon SleeveGD Gray LayflatBD Blue LayflatRD Red LayflatVS Velcro Sleeve
Protection
Length
T TestedV VaultM MarkedG Grounded
TVM (optional)
CSGSFRACARC400BLENDER300FBLENDERWD2PLYWD4PLYDRY75LDRY75HDRY150FUELDELPOTABLEWATERJ1500TEXCON800TEXWIRE1275SANDBL150MP500PUSH300LPGFUELDEL250
FARMTANK50STEAMBK250STEAMRD250PVCAIR300MP300MP200PVCSPRAY570PVCSPRAY800BDGDREDHDWARFLEXEDIBLEOILPBPWMILLMILLDJBOOSTER800
IF100 Integral Female Figure 100IM206 Integral Male Figure 206 6IF206 Integral Female Figure 206 6PLM Pin Lug Male M BPLF Pin Lug Female M BIXM Internal Expansion Male PipeIXG Internal Expansion GroovedIXCB Internal Expansion California StubHD Heavy Duty Male Pipe 6HDG Heavy Duty Grooved 6HDBW Heavy Duty Buttweld 6FF150 Fixed Flange 150# 6 4 YFL150 Floating Flange 150# 6 4 YCROWH Crowfoot Hose End B 6CROWHC Crowsfoot Hose End Crimp-OnGJF Ground Joint Female BGJM Ground Joint Male B
ORDERSPEC SHEET
• Available in sizes 1/4” - 12”• Operates in high/low temperatures• Fire safety up to 1200° F• No permeation of gases• Full vacuum• Annular is hydroformed, a process that enhances flexibility and extends life of hose• Suitable for oils, chemicals, gases, exhaust gases, water, steam, vacuum, etc.• All hoses leak tested under water
Stainless Steel Metal Hose
Annular, expandsif no braid
Braid
Fluid CompatibilityGuide
Metal HoseApplications Guide
Metal Hose Care andInstallation Guide,
Glossary
Helpful Hose Routing Calculations
Code
Female JIC SwivelMale pipe/pipe nippleMale pipe hexImperial Tube EndGrooved (Victaulic)Fixed Flange 150#Fixed Flange 300Floating Flange 150#Floating Flange 300#Weld-neck flange 150#Weld-neck Flange 300#TTMA Flange#Pipe Stub end 150#Pipe stub end 300#Reuse Customer End
FJX
MPP
MPH
TBE
GRV
FL150
FL300
FF150
FF300
WF150
WF300
TTMA
BW150
BW300
RCE
Description
Fitting Types
O&GC
S
A G&W
LT W
# of Braids
012
HoseID
FittingMaterialC Carbon4 3046 316B Brass
FittingSize #1
FittingType
#1
FittingSize #2
FittingType
#2
Length
BraidMaterial
46
304316
HosePressure
SH
StandardHigh
HoseFlexibilitySF
StandardFlexible
MetalHose
AnnularMaterial4 3046 3161 321H Hastelloy
MH1SS4132 - 4 32 MPP- 432 FF150 -20.00IN
Fixed x Float
MH1SS4116-616FF150-616FL150-20FT-TVMMH1SS4132-632FF150-632FL150-20FT-TVMMH1SS4148-648FF150-648FL150-20FT-TVMMH1SS4164-664FF150-664FL150-20FT-TVMMale Pipe
MH1SS4112-412MPP-412MPP-20FT-TVM
Air
Chemical
Fracking
Food and Bev
Gas and Welding
Ventilation
Oil and Gas
Material Handling
Low Temp
Steam
Water
Primary Use
O&G
F
C
F&B
MH
S
A
V
G&W
LT
W
CAM••C•
A,B,D,Y,6
Coupler x Hose Shank
1/2” - 10”
KCBW•••KC Nipple, Buttweld
1/2”- 12”
KC•••YKC Nipple, Poly
1/2”- 4” Y
LD••-••••LD Ferrules
1”- 8”
SL••-••••Crimp Sleeves
1”- 8”
CAM••E•
A,B,D,Y,6
Adapter x Hose Shank
1/2” - 10”
Industrial
and Oilfield
Hose Ends
IM206, IF206Figure 206 Integral
Male, Integral Female
3”- 8” M
IM206, IF206
3”- 8” Muse with NF
IM100, IF100Figure 100 Integral
Male, Integral Female
2” - 4” M
IM100, IF100
2” - 4” Muse with NF
FF150Floating Flange
2”- 12”use with NF C,6
Notched Ferrule NF••-••••
P2” - 8”
BBHDM, BBHDFBauer HD Type B
Male, Female
4” - 12”use with ferrules,handles suction
P
KCN•••P
P
KC Nipple Notched
2” - 4”
KCN•••P
P4”use with NF
BAHDM, BAHDFBauer HD Type A
Male, Female
4” - 12”use with ferrules,handles suction
P
FL150Fixed Flange
2”- 12” Puse with NF
BBM, BBFBauer Type AMale, Female
BBM, BBFBBM BB
4” - 12”use with clamps
P
CAM••B•
A,B,D,Y,6
Coupler x MP
1/2” - 10”
CAM••A•
A,B,D,Y,6
Adapter x FP
1/2” - 10”
Replacement Parts, Gaskets, Arms, Pins Safety Bumps
Male, Female
2”-4” Y
SBM, SBF
M
Foot Valvewith Strainer
STR-FV•••
1.5”-8”
STR-RH,STR-SH
P,61.5”-8”
Round and Square Hole Strainers
STR-RHL•••
P
Long Round Strainer
1-1/2” - 4”
Bottom and Top Skimmers
STR-BH, STR-TH
P1.5”-3”
Witches Hat and Plate Strainer
STR-CONE,STR-PL
3”-4” P,64 Y
Sight Glass
1.5”-6” Y”-6”
SIGHT••-••IN Figure 100ThreadedASTM A105 N
CWP 1,000 psi
(TPI)
3.5 MOD3 MOD3 MOD4 STD3 STD3 STD
lbs.
5.7513.4
19.8533
46.2561.8
234568
ACME WEIGHTSIZE
Figure 206ThreadedASTM A105 N
CWP 2,000 psi
Figure 206ThreadedASTM A105 N
CWP 2,000 psi
* Figure 206 has an O-Ring for a better seal
(TPI)
6 STD6 STD4 STD4 STD4 STD4 STD
3 MOD
lbs.
1.762.252.455.1
9.9213.3
18.55
11¼1½2
2½34
ACME WEIGHTSIZE(TPI)
4 STD3 STD3 STD3 STD
lbs.
33.2543.2561.7
90.75
568
10
ACME WEIGHTSIZE
Cap used with Figure 200 or 2061 piece or 2 piece construction
Figure 207ThreadedASTM A105N
CWP 2,000 psiBlanking Union
(TPI)
4 STD3 MOD3 STD3 STD3 STD
lbs.
10.7516.538.5
70.7596.25
3468
10
ACME WEIGHTSIZE
Industrial Hose Connections
14
CAM••D•
A,B,D,Y,6
Coupler x FP
1/2” - 10”
CAM••F•
A,B,D,Y,6
Adapter x MP
1/2” - 10”
CAM••DP•
A,B,D,Y,6
Dust PlugCAM••DP•
A,B,D,Y,61/2” - 10”
STR-PE•••
Y
PolyethyleneStrainer
1/2” - 3”
CAM••DC•
A,B,D,Y,6
Dust Cap
1/2” - 10”
Heavy Duty MalePipe Stem
P
HDMP
2” - 12”
RLM, RLFRing Lock
Male, Female
4”- 10” A
Heavy DutyBeveled Stem
P,6
HDBW
2” - 12”
Heavy DutyFerrules
P,6
HD••-••••
2” - 12”
BAM, BAFBauer Type AMale, Female
BAM, BAFBAM BA
4” - 12”use with clamps
P
1.5” - 6”use withspannerwrench
therh
A,B,M
Pin Lugs
PLM, PLF
3/8”- 2” A,B
CROWH,CROWHCCrowsfoot,
Crowsfoot CrimpedGround Joint
Couplings
GJF, GJM
M,63/4”-2”
150# Flange XFigure 206 Adapters
M4”
Hammer
Unions
Camlocks
KC•••KC Nipple (Black)
1/2”- 12”
KC•••PKC Nipple, Plated
1/2”- 12” P
KC•••6KC Nipple, SS316
1/2”- 12” 6
KCG•••KC Nipple, Grooved
1/2”- 12”
Strainers
Bauers
Style
Quick
Connects
15
Accessories
Male Bauer x MPShort Ball
P
BAU•MC-MP•••
4”-12”
Male Bauer x MPShort Ball
P
BAU•MC-MP•••
4”-12”
Bauer Reducer
4”-12”
BAU•FC•••-MC•••
2 P
Female Bauer x Flange
4”-12”4 12
BAU•MC-FL150•••
P
Bauer Cap
4”-12”
BAU•CAP•••BAU CAP
P
Male Bauer x Female 90
BAU•MC-FC90•••
4”-12” P
BAU•MC-MPL•••Male Bauer x MP
Long Ball
P4”-12”
Bauer Increaser
4”-12”
BAU•FC•••-MC•••
P
Male Bauer x Female 45
4”-12”
BAU•MC-FC45•••
P
Bauer Locking Lever, O-Ring
BAU•LR,BAU•RG
2”-12”
Bauer Strainer
BAU•MC-STR•••
4”-12” P
Double Female“Y” Bauer
4”-12”
BAU•Y•••
P
Female Bauer x MP
P
BAU•FC-MP•••
4”-12” P2
Bauer Plug
4”-12”
BAU•PLUG•••
P
Crowsfoot x MP
1/4”-1” 150psi
CROWM•••
B,M,6
Crowfoot x FP
CROWF•••
B,M,61/4”-1” 150psi
Flange “Y”
FL150CY•••FL150CY
4”-24” C,6
Washers, Safety ClipsCROWW,CROWSC
Flange xFlange 45°
4”-24” C,6
FL150C45•••
Hose to Hose,Hose to Tool
Hose ID 1/2” - 4”
WHIP CHECKS
Flange xFlange 90°
4”-24” C,6
FL150C90•••
Lug Style, Short Neck,EPDM Seat
AWWA Flanges (8 bolt)4” to 12”
VBFLSN-DD1EL
4 to 12
2 Piece Full PortBrass 600 WOG
150 WSP (Steam)1/4” to 4”Import, Domestic
VBA2FB600
Import, Domestic
Grooved
Nipples,
Fittings &
Couplings
Comparable to Victaulic
& Gruvlok
Groove x Groove
S40BGG-••-••INGroove x Threaded
S40BGTReducing Adapter
GRVRA-••ODCap
GRVCAP-••ODElbow 45
GRVE45-••ODElbow 90
GRVE90-••OD
Tee
GRVTEE-••ODStandard Coupling
GRVRCPQuick Release
GRVQRC
Schedule 40
& Schedule 80
Butt Weld
Fittings
Elbow 90 Short
S40BWE90SRConcentric Reducer
S40BWCREDTee
S40BWTEE
Crowsfoot
Couplings
ANSI
Flanges
Class 150, 300, 400, 600,
900, 1500, 2500 Carbon,
304SS, 316SS
Nut, Bolt, &Gasket Kit
4”-24”
FL150NBG•••
P
2, 4, and 6 BoltClamp
1/4” - 4”
BC•••
Flange “T”
FL150TEE•••
4”-24” C,6
Threaded
FL150CTHR-••
Valves
Spring check valve,flanged ends
VCKSPC150-••FL
4”-16”
Flanged gate valve
VG8C150-••FL
4”-16”
Flanged knifegate valve
VGKC150-••FL
4”-16”
up to 230° F up to 105° F
Steel Pipe with Galvanized PlatingCan be used for clean water, storm drain, sewer by-pass, or transmission lines.
Popular Assemblies
BAUERGP64-10FT, 20FT BAUERGP96-10FT, 20FT BAUERGP128-10FT, 20FT BAUERGP160-10FT
4”6”8”
10”
HDPE Pipe High Density PolyethyleneFor water or sewer by-pass, temporary use.
Popular Assemblies
4” BAUERHP64-10FT, 20FT6” BAUERHP96-10FT, 20FT8” BAUERHP128-10FT, 20FT
BAUER PIPE
FlangeReducer/Increaser
C,64”-24”
FL150CRED•••-•••
Wafer Notched, Short Neck EPDM Seat
ANSI 150# (8 Bolt)4”, 5”
VBFWS8-DD1EL
4”,,,,,,,,,,,,, 5”555555555555555555
Locations InfoScan for Directions, Freight Maps, Published Rates, and Shipment Cut Off Times.No automatic answering service - we answer the phones ready to provide the services you need. Account customers can rely on 24/7 phone and call out service.
Southeast Lakeland, FL
4920 S Frontage RoadLakeland, FL 33815Phone (863) 777-4360Fax (863) [email protected]
Lafayette, LA
920 Young StreetBroussard, LA 70518Phone (337) 330-4035Fax (337) [email protected]
Northeast Pittsburgh, PA
130 Southpointe DriveBridgeville, PA 15017Phone (412) 257-6155Fax (412) [email protected]
Towanda, PA
RR6 Box 6019-7Towanda, PA 18848Phone (570) 265-7979Fax (570) [email protected]
Rockies Bakersfield, CA
3202 Pegasus RoadBakersfield, CA 93308Phone (661) 392-0491Fax (661) [email protected]
Grand Junction, CO
757 Valley CourtGrand Junction, CO 81505Phone (970) 256-9900Fax (970) [email protected]
Greeley, CO
600 31st, Unit 1Evans, CO 80620Phone (970) 330-1357Fax (970) [email protected]
Dickinson, ND
2679 3rd Avenue WestDickinson, ND 58601Phone (701) 225-7861Fax (701) [email protected]
Williston, ND
3410 2nd Avenue WestWilliston, ND 58802Phone (701) 774-5330Fax (701) [email protected]
Vernal, UT
1005 East 500 South Vernal, UT 84078 Phone (435) 781-4760
Fax (435) 781-4763 [email protected]
Roosevelt, UT
1687 West Hwy 40Roosevelt, UT 84066
Phone (435) 722-0860 Fax (435) 722-0865 [email protected]
Casper, WY
3177 Energy Lane Casper, WY 82604 Phone (307) 472-3670 Fax (307) 472-3671
Rock Springs, WY
1895 Foothill Boulevard Rock Springs, WY 82901
Phone (307) 362-6773 Fax (307) 362-7717 [email protected]
Southwest Hobbs, NM
200 North Grimes Hobbs, NM 88240 Phone (575) 397-0031 Fax (575) 397-1237
El Reno, OK
3500 US Highway 81 El Reno, OK 73036
Phone (405) 262-2499 Fax (405) 262-2610 [email protected]
Oklahoma City, OK - Corporate Headquaters
3312 South I-35 Service Road Oklahoma City, OK 73129 Phone (405) 670-6718 Fax (405) 670-6816 [email protected]
Woodward, OK
3900 1st Street Woodward, OK 73801 Phone (580) 254-3547
Fax (580) 254-2645 [email protected]
Texas Alice, TX
3754 East Highway 44 Alice, TX 78332 Phone (361) 661-1815 Fax (361) 661-1858 [email protected]
Dallas, TX
1132 Valwood Parkway, Suite 100 Carrollton, TX 75006 Phone (214) 638-3210
Fax (214) 638-6527 [email protected]
Dilley, TX
16120 IH 35S Dilley, TX 78017 Phone (830) 963-2063 Fax (830) 963-3848
Fort Worth, TX (Industrial)
3301 Fisher Avenue Fort Worth, TX 76111
Phone (817) 870-9130 Fax (817) 870-9150 [email protected]
Forth Worth, TX (Oilfield)
6675 Corporation Parkway Fort Worth, TX 76126 Phone (817) 244-3575 Fax (817) 244-3739 [email protected]
Houston, TX
10640 Tanner Road Houston, TX 77041 Phone (713) 983-9092
Fax (712) 983-0262 [email protected]
Longview, TX
119 Old Post Oak RoadKilgore, TX 75662
Phone (903) 238-9616 Fax (903) 984-9651 [email protected]
Odessa, TX
1211 South County Road West Odessa, TX 79763 Phone (432) 333-2488 Fax (432) 333-2492
Pasadena, TX
2500 Pasadena Freeway Pasadena, TX 77506
Phone (713) 472-2900 Fax (713) 472-2901 [email protected]
San Antonio, TX
19940 South IH-37 Elmendorf, TX 78112 Phone (210) 932-9304 Fax (210) 932-9302 [email protected]
Find NearestLocation
UpdatedLocations List
LocationsMap
