Reliance Foundry Bollard Guide...

Guide SpecificationsSection 32 39 13

Bollards

Reliance Foundry bollards add architectural accents to your perimeter security, landscaping, traffic control, and streetscape projects. Use bollards as stand-alone landscape accents or design features for new and existing buildings, and as decorative covers over steel security posts. Reliance Foundry brings over 80 years of casting experience to the design and manufacturing of our products.

Specification Coordination: Edit this guide specification to meet project requirements. Coordinate with other specification sections as required. This guide specification is available in word processing format at www.reliance-foundry.com. Display hidden text to see or print notes to specifier. In Microsoft Word, use “Page Layout” view to see product illustrations.

Drawing Coordination: Show locations, sizes, layout, and spacing of each type of bollard required. Show footing and security post details, if required.

Additional Information: Contact Reliance Foundry at:Telephone: 604-592-4333 or toll-free at 888-735-5680E-mail: [email protected]: www.reliance-foundry.com

SECTION [32 39 13]ALTERNATE SECTIONS [05 74 00] [12 93 00]

BOLLARDS

PART 1 - GENERAL

1.1 SUMMARY

A. Section Includes:1. Metal bollards.2. Bicycle bollards.3. Flexible bollards.4. Plastic security post covers.5. Solar-powered lighting bollards.6. Mounting hardware.7. [Chain.]8. [_________________]

B. Related Requirements:1. [Division 03 Sections: [Concrete] [Mortar] fill for security posts.]2. [Division 08 Sections: Padlocks.]3. [_________________]

1.2 REFERENCE STANDARDS

A. ASTM A36 – Standard Specification for Carbon Structural Steel.

B. ASTM A312 – Standard Specification for Seamless, Welded, and Heavily Cold Worked Austenitic Stainless Steel Pipes

Reliance Foundry Bollards 32 39 13 - 1 Guide Specification

http://www.reliance-foundry.com/

mailto:[email protected]


C. ASTM A413 – Standard Specification for Carbon Steel Chain.

D. ASTM A536 – Standard Specification for Ductile Iron Castings.

E. ASTM B26 – Standard Specification for Aluminum-Alloy Sand Castings.

F. ASTM D1654 – Standard Test Method for Evaluation of Painted or Coated Specimens Subjected to Corrosive Environments.

G. CE Mark – Manufacturer’s declaration of compliance with European Union Low Voltage Directive 2006/95/EC.

H. RoHS – Directive 2002/95/EC on the Restriction of the Use of certain Hazardous Substances in Electrical and Electronic Equipment.

1.3 SUBMITTALS

A. Comply with Section [01 33 00 – Submittal Procedures.] [_________.]

B. Product Data: Provide for each type of bollard, component, finish, and accessory specified.

C. Color Samples: [Submit manufacturer’s standard colors for selection.] [Submit sample of color specified.]

D. Setting Drawings: Show embedded items and cutouts required for work specified in other Sections.

E. Maintenance Data: Submit manufacturer’s field touch-up, cleaning, and maintenance instructions.

F. Warranty Documentation: Submit sample of manufacturer’s warranty.

1.4 QUALITY ASSURANCE

A. Comply with Section [01 43 00 – Quality Assurance.] [_________.]

1.5 DELIVERY, STORAGE AND HANDLING

A. Comply with Section [01 66 00 – Product Storage and Handling Requirements.] [_________.]

B. Protect bollards and accessories during delivery, storage, and handling.

1.6 WARRANTY

A. Comply with Section [01 78 36 – Warranties.] [_________.]

B. Provide manufacturer’s one-year warranty agreeing to repair or replace components with manufacturing defects.

PART 2 - PRODUCTS


2.1 MANUFACTURERS

A. Acceptable Manufacturer: Reliance Foundry Co. Ltd., phone 604-592-4333 or 888-735-5680, fax 604-590-8875, website www.reliance-foundry.com, email [email protected].

B. Substitutions: [Comply with provisions of [Section 01 25 00] [_________] for substitution procedures.] [Not allowed.]

2.2 METAL BOLLARDS

A. Indoor Bollard [Designer’s Designation]: 1. Model: Reliance Foundry; R-7180.2. Size: 24 inches high x 4 inches diameter.3. Design: Cylinder with rounded top.4. Material: Stainless steel, ASTM A312, Grade TP 304.5. Installation: 2-bolt threaded mount.

B. Indoor Bollard [Designer’s Designation]: 1. Model: Reliance Foundry; R-7181.2. Size: 32 inches high x 4 inches diameter.3. Design: Cylinder with rounded top.4. Material: Stainless steel, ASTM A312, Grade TP 304.5. Installation: 2-bolt threaded mount.

C. Bollard Cover [Designer’s Designation]: 1. Model: Reliance Foundry; R-7301.2. Size: 36 inches high x 6.26 inches diameter.3. Design: Cylindrical bollard cover with rounded top.4. Material: Stainless steel: ASTM A312, Grade TP 304.5. Color Coating:

a. Type: Polyester powder coat over epoxy primer.b. Color: [Semi-gloss black with hammered (stippled) texture.] [Dark green.] [Statuary bronze.] [Bengal Stainless.] [Anodized silver.] [Safety yellow.]

6. Installation:a. Security post cover, new post: Foam adhesive, installation hanger or set-screw installation.

1) Security Post: [Steel] [Galvanized steel] pipe, size as shown on Drawings. 2) Footing and Fill: Concrete or mortar, [3000 psi minimum.] [as specified in Section [__ __ __].]

b. Security post cover, existing post: Foam adhesive, installation hanger or set-screw installation.

D. Bollard [Designer’s Designation]: 1. Model: Reliance Foundry; R-7320.2. Size: 39 inches high x 4 inches diameter.3. Design: Cylindrical bollard cover with rounded top and base flange.4. Material: Stainless steel: ASTM A312, Grade TP 304.5. Color Coating:



mailto:[email protected]


6. Installation:a. Fixed, new or existing concrete, flange surface mount.b. Security post cover, new post: Foam adhesive, surface mount, or set-screw installation.


c. Security post cover, existing post: Foam adhesive, surface mount, or set-screw installation.

E. Bollard [Designer’s Designation]: 1. Model: Reliance Foundry; R-7321.2. Size: 36 inches high x 7 1/2 inches diameter.3. Design: Cylindrical bollard cover with rounded top.4. Material: Stainless steel: ASTM A312, Grade TP 304.5. Color Coating:


6. Installation:a. Security post cover, new post: Foam adhesive or set-screw installation.


b. Security post cover, existing post: Foam adhesive or set-screw installation.

F. Bollard [Designer’s Designation]: 1. Model: Reliance Foundry; R-7331.2. Size: 39 inches high x 10 inches diameter.3. Design: Cylindrical with tapered bottom and ball top.4. Material:

a. Aluminum: ASTM B26; 20 percent recycled-material content.b. Ductile Cast Iron: ASTM A536, Grade 65-45-12; 30 percent recycled-material content.

5. Color Coating:a. Type: Polyester powder coat over epoxy primer.b. Color: [Semi-gloss black with hammered (stippled) texture.] [Dark green.] [Statuary bronze.] [Bengal Stainless.] [Anodized silver.] [Safety yellow.]

6. Installation:a. Fixed, New Concrete, Anchor: Provide anchor for casting into new concrete.b. Fixed, existing concrete, insert.c. Fixed, existing concrete, adhesive.d. Fixed, existing concrete, flange and insert.e. Security post cover, new post:


f. Security post cover, existing post.


g. Removable, New Concrete, Anchor: Provide anchor and receiver kit.h. Removable, Existing Concrete, Insert: Provide insert and receiver kit.

G. Bollard [Designer’s Designation]:1. Model: Reliance Foundry; R-7510.2. Size: 30 inches high x 18 inches square base.3. Design: Marine style.4. Material:

a. Ductile Cast Iron: ASTM A536, Grade 65-45-12; 30 percent recycled-material content.


6. Installation:a. Fixed, New Concrete, Anchor: Provide anchor for casting into new concrete.b. Fixed, existing concrete, insert.c. Fixed, existing concrete, adhesive.d. Security post cover, new post:


e. Security post cover, existing post.

H. Bollard [Designer’s Designation]: 1. Model: Reliance Foundry; R-7520.2. Size: 35 inches high x 15 inches diameter.3. Design: Tapered and fluted with a flat top.4. Material:






I. Bollard [Designer’s Designation]: 1. Model: Reliance Foundry; R-7530 [-AL].2. Size: 39 inches high x 10 inches diameter.3. Design: Cylindrical and fluted, with tapered bottom and ball top.4. Material:




6. Installation:a. Fixed, New Concrete, Anchor: Provide anchor for casting into new concrete.b. Fixed, existing concrete, insert. c. Fixed, existing concrete, adhesive.d. Fixed, existing concrete, flange and insert.e. Security post cover, new post:

1) Security Post: [Steel] [Galvanized steel] pipe, size as shown on Drawings. 2) Footing and Fill: [3000 psi minimum concrete or mortar.] [[Concrete] [Mortar] as specified in Section [__ __ __].]

f. Security post cover, existing post.g. Removable, New Concrete, Anchor: Provide anchor and receiver kit.h. Removable, Existing Concrete, Insert: Provide insert and receiver kit.

J. Bollard [Designer’s Designation]: 1. Model: Reliance Foundry; R-7532.2. Size: 53 inches high x 16 inches diameter.3. Design: Cylindrical and non-fluted, with tapered bottom and nautical top.4. Material:






K. Bollard [Designer’s Designation]: 1. Model: Reliance Foundry; R-7533.2. Size: 49 inches high x 16 inches diameter.3. Design: Cylindrical and non-fluted, with tapered bottom and flat top.4. Material:


5. Color Coating:






L. Bollard [Designer’s Designation]: 1. Model: Reliance Foundry; R-7535.2. Size: 39 inches high x 14 inches diameter.3. Design: Cylindrical and fluted, with a rounded top.4. Material:


5. Color Coating: a. Type: Polyester powder coat over epoxy primer.b. Color: [Semi-gloss black with hammered (stippled) texture.] [Dark green.] [Statuary bronze.] [Bengal Stainless.] [Anodized silver.] [Safety yellow.]




M. Bollard [Designer’s Designation]: 1. Model: Reliance Foundry; R-7536.2. Size: 47 inches high x 16 inches diameter.3. Design: Cylindrical and non-fluted, with tapered bottom and rounded top.4. Material:



6. Installation:a. Fixed, New Concrete, Anchor: Provide anchor for casting into new concrete.b. Fixed, existing concrete, insert.c. Fixed, existing concrete, adhesive.


d. Security post cover, new post:1) Security Post: [Steel] [Galvanized steel] pipe, size as shown on Drawings. 2) Footing and Fill: Concrete or mortar, [3000 psi minimum.] [as specified in Section [__ __ __].]


N. Bollard [Designer’s Designation]: 1. Model: Reliance Foundry; R-7538.2. Size: 35 inches high x 15 inches diameter.3. Design: Tapered and fluted, with fluted base and nautical-styled top.4. Material:





e. Security post cover, existing post.f. Removable, New Concrete, Anchor: Provide anchor and receiver kit.g. Removable, Existing Concrete, Insert: Provide insert and receiver kit.

O. Bollard [Designer’s Designation]: 1. Model: Reliance Foundry; R-7539 [-AL].2. Size: 36 inches high x 10 inches diameter.3. Design: Tapered and fluted, with round finial and ball top.4. Material:







P. Bollard [Designer’s Designation]: 1. Model: Reliance Foundry; R-7542.2. Size: 30 inches high x 10 inches hexagonal base 3. Design: Tapered and fluted, with matching geometric finial.4. Material:






Q. Bollard [Designer’s Designation]: 1. Model: Reliance Foundry; R-7551.2. Size: 36 inches high x 10 inches diameter.3. Design: Tapered with round finial and ball top.4. Material:







R. Bollard [Designer’s Designation]: 1. Model: Reliance Foundry; R-7552.2. Size: 36 inches high x 10 inches diameter.3. Design: Tapered with round finial and contemporary-styled top.4. Material:






S. Bollard [Designer’s Designation]: 1. Model: Reliance Foundry; R-7553.2. Size: 32 inches high x 10 inches diameter.3. Design: Tapered with round finial and flat disc top.4. Material:






T. Bollard [Designer’s Designation]: 1. Model: Reliance Foundry; R-7555.


2. Size: 34 ½ inches high x 10 inches diameter.3. Design: Tapered with round finial and large ball top.4. Material:






U. Bollard [Designer’s Designation]: 1. Model: Reliance Foundry; R-7561.2. Size: 35 inches high x 15 inches diameter.3. Design: Tapered with round finial and ball top.4. Material:






V. Bollard [Designer’s Designation]: 1. Model: Reliance Foundry; R-7562.2. Size: 35 inches high x 15 inches diameter. 3. Design: Tapered with round finial and contemporary-styled top.


4. Material:a. Ductile Cast Iron: ASTM A536, Grade 65-45-12; 30 percent recycled-material content.


6. Installation:a. Fixed, New Concrete, Anchor: Provide anchor for casting into new concrete.b. Fixed, existing concrete, insert. c. Fixed, existing concrete, adhesive.d. Security post cover, new post:



W. Bollard [Designer’s Designation]: 1. Model: Reliance Foundry; R-7563.2. Size: 31 inches high x 15 inches diameter.3. Design: Tapered with round finial and flat disc top.4. Material:






X. Bollard [Designer’s Designation]: 1. Model: Reliance Foundry; R-7565.2. Size: 34 inches high x 15 inches diameter.3. Design: Tapered with round finial and large ball top.4. Material:







Y. Bollard [Designer’s Designation]: 1. Model: Reliance Foundry; R-7571.2. Size: 40 inches high x 5 ¾ inches diameter. 3. Design: Cylindrical with round finial and ball top.4. Material:

a. Steel: ASTM A36; 25 percent recycled-material content.5. Color Coating:





Z. Bollard [Designer’s Designation]: 1. Model: Reliance Foundry; R-7572.2. Size: 40 inches high x 5 3/4 inches diameter. 3. Design: Cylindrical with round finial and contemporary-styled top.4. Material:



6. Installation:a. Fixed, New Concrete, Anchor: Provide anchor for casting into new concrete.


b. Fixed, existing concrete, insert.c. Fixed, existing concrete, adhesive.d. Security post cover, new post:



AA. Bollard [Designer’s Designation]: 1. Model: Reliance Foundry; R-7573.2. Size: 36 inches high x 5 3/4 inches diameter. 3. Design: Cylindrical with round finial and flat disc top.4. Material:






BB. Bollard [Designer’s Designation]: 1. Model: Reliance Foundry; R-7575.2. Size: 39 inches high x 5 3/4 inches diameter. 3. Design: Cylindrical with round finial and large ball top.4. Material:




1) Security Post: [Steel] [Galvanized steel] pipe, size as shown on Drawings.


2) Footing and Fill: Concrete or mortar, [3000 psi minimum.] [as specified in Section [__ __ __].]


CC. Bollard [Designer’s Designation]: 1. Model: Reliance Foundry; R-7576.2. Size: 34 inches high x 5 3/4 inches diameter.3. Design: Cylindrical with round finial and rounded top.4. Material:






DD. Bollard [Designer’s Designation]: 1. Model: Reliance Foundry; R-7581 [-AL].2. Size: 31 inches high x 15 inches diameter.3. Design: Tapered and fluted, with round finial and flat disc top.4. Material:





e. Security post cover, existing post.f. Removable, New Concrete, Anchor: Provide anchor and receiver kit.


g. Removable, Existing Concrete, Insert: Provide insert and receiver kit.

EE. Bollard [Designer’s Designation]: 1. Model: Reliance Foundry; R-7582.2. Size: 34 inches high x 15 inches diameter.3. Design: Tapered and fluted, with round finial and large ball top.4. Material:

a. Aluminum: ASTM B26; 20 percent recycled-material content.b. Ductile Cast Iron: ASTM A536, Grade 65-45-12; 30 percent recycled-material content.c. Steel: ASTM A36; 25 percent recycled-material content.d. Stainless steel: ASTM A312, Grade TP 304.





FF. Bollard [Designer’s Designation]: 1. Model: Reliance Foundry; R-7589 [-AL].2. Size: 35 inches high x 15 inches diameter.3. Design: Tapered and fluted, with round finial and ball top.4. Material:







g. Removable, Existing Concrete, Insert: Provide insert and receiver kit.

GG. Bollard [Designer’s Designation]: 1. Model: Reliance Foundry; R-7591 [-AL].2. Size: 32 inches high x 10 inches diameter.3. Design: Tapered and fluted, with round finial and flat disc top.4. Material:






HH. Bollard [Designer’s Designation]: 1. Model: Reliance Foundry; R-7592.2. Size: 35 inches high x 10 inches diameter.3. Design: Tapered and fluted, with round finial and large ball top.4. Material:






II. Bollard [Designer’s Designation]:


1. Model: Reliance Foundry; R-7593.2. Size: 53 inches high x 16 inches diameter.3. Design: Tapered cylindrical body with round finial and ball top.4. Material:






JJ. Bollard [Designer’s Designation]: 1. Model: Reliance Foundry; R-7595.2. Size: 53 inches high x 16 inches diameter. 3. Design: Tapered cylindrical body with round finial and large ball top.4. Material:






KK. Bollard [Designer’s Designation]: 1. Model: Reliance Foundry; R-7598.2. Size: 36 inches high x 10 inches diameter.3. Design: Tapered and fluted, with fluted base and nautical-styled top.4. Material:


5. Color Coating:a. Type: Polyester powder coat over epoxy primer.


b. Color: [Semi-gloss black with hammered (stippled) texture.] [Dark green.] [Statuary bronze.] [Bengal Stainless.] [Anodized silver.] [Safety yellow.]




LL. Bollard [Designer’s Designation]: 1. Model: Reliance Foundry; R-7611.2. Size: 23 inches high x 12 inches diameter.3. Design: Hourglass shape with rounded top.4. Material:






MM. Bollard [Designer’s Designation]: 1. Model: Reliance Foundry; R-7651.2. Size: 19.3 inches high x 27 inches long x 25 inches wide.3. Design: Sloped-sided oval designed by Billings Jackson.4. Material:



6. Installation:a. Fixed, new or existing concrete, surface-mounted over flanged interior mounting system.

NN. Bollard [Designer’s Designation]:


1. Model: Reliance Foundry; R-7651-EM.2. Size: 19.3 inches high x 27 inches long x 25 inches wide.3. Design: Sloped-sided oval designed by Billings Jackson.4. Material:



6. Installation:a. Embedded, over security post cover, new post:


b. Embedded, new concrete.

OO. Bollard [Designer’s Designation]: 1. Model: Reliance Foundry; R-7691.2. Size: 39 inches high x 15 inches diameter. 3. Design: Tapered and fluted, with fluted base and flat disc top.4. Material:






PP. Bollard [Designer’s Designation]: 1. Model: Reliance Foundry; R-7736.2. Size: 36 inches high x 12 inches diameter.3. Design: Cylindrical with segmented rings and rounded top.4. Material:



6. Installation:a. Fixed, New Concrete, Anchor: Provide anchor for casting into new concrete.b. Fixed, existing concrete, insert.


c. Fixed, existing concrete, adhesive.d. Security post cover, new post:



QQ. Bollard [Designer’s Designation]: 1. Model: Reliance Foundry; R-7744.2. Size: 44 1/2 inches high x 13 inches diameter. 3. Design: Cylindrical with rounded top.4. Material:






RR. Bollard [Designer’s Designation]: 1. Model: Reliance Foundry; R-7835.2. Size: 35 inches high x 9 1/2 inches diameter. 3. Design: Cylindrical with segmented rings and rounded top.4. Material:







SS. Bollard [Designer’s Designation]: 1. Model: Reliance Foundry; R-7901.2. Size: 36 inches high x 4 1/3 inches diameter.3. Design: Cylindrical with segmented rings and rounded top.4. Material:



6. Reflective Stripe: [White][Yellow][Blue][None].7. Installation:

a. Fixed, New Concrete, Embedded.b. Fixed, Existing Concrete, Flange, surface mount.c. Security post cover, new post:


d. Security post cover, existing post.e. Removable, New Concrete, Receiver:

1) [Steel ][Stainless steel] receiver with lid.2) [Steel ][Stainless steel] receiver with chain.

f. Removable, Existing Concrete, Receiver:1) [Steel ][Stainless steel] receiver with lid.2) [Steel ][Stainless steel] receiver with chain.

TT. Bollard [Designer’s Designation]: 1. Model: Reliance Foundry; R-7902.2. Size: 36 inches high x 4 1/3 inches diameter.3. Design: Cylindrical with rounded top.4. Material:




a. Fixed, New Concrete, Embedded.b. Fixed, Existing Concrete, Flange, surface mount.c. Security post cover, new post:




f. Removable, Existing Concrete, Receiver:1) [Steel ][Stainless steel] receiver with lid.


2) [Steel ][Stainless steel] receiver with chain.

UU. Bollard [Designer’s Designation]: 1. Model: Reliance Foundry; R-8410[-RA].2. Size: 36 inches high x 9 1/4 inches diameter.3. Design: Fixed cylinder with flat top.4. Material:

a. [Coated ]Stainless Steel: ASTM A312, Grade TP 304.5. Color Coating:


6. Installation:a. Fixed, New Concrete, Embedded.

VV. Bollard [Designer’s Designation]: 1. Model: Reliance Foundry; R-8412[-RA].2. Size: 36 inches high x 9 1/4 inches diameter.3. Design: Fixed cylinder with flat top.4. Material:



6. Installation:a. Removable, New Concrete, Anchor: Provide anchor and receiver kit.b. Removable, Existing Concrete, Insert: Provide insert and receiver kit.

WW. Bollard [Designer’s Designation]: 1. Model: Reliance Foundry; R-8421[-RA].2. Size: 36 inches high x 9 1/4 inches diameter.3. Design: Fixed cylinder with flat top.4. Material:



6. Installation:a. Retractable, New Concrete:

1) Receiver: Included with bollard.2) Footing: [3000 psi minimum concrete or mortar.] [[Concrete] [Mortar] as specified in Section [__ __ __].]3) Fill: [Aggregate.] [Aggregate as specified in Section [__ __ __].]

b. Retractable, Existing Concrete:1) Receiver: Included with bollard. 2) Footing: [3000 psi minimum concrete or mortar.] [[Concrete] [Mortar] as specified in Section [__ __ __].]3) Fill: [Aggregate.] [Aggregate as specified in Section [__ __ __].]

XX. Bollard [Designer’s Designation]:


1. Model: Reliance Foundry; R-8610. 2. Size: 35 by 7.9 inches.3. Design: Straight square base with flat top and composite wood inserts.4. Material:

a. Steel: ASTM A36; 25 percent recycled-material content.5. Arms: Match body.6. Color Coating:


7. Composite Wood Insert: [Cedar.][Black walnut.]8. Installation:

a. Fixed, new concrete, embedded.b. Fixed, existing concrete, flange and insert.

YY. Bollard [Designer’s Designation]: 1. Model: Reliance Foundry; R-8612. 2. Size: 43 by 7.9 inches.3. Design: Straight square base with ball top and composite wood inserts.4. Material:





ZZ. Bollard [Designer’s Designation]: 1. Model: Reliance Foundry; R-8901.2. Size: 36 inches high x 4 1/3 inches diameter.3. Design: Cylindrical with segmented rings and rounded top.4. Material:

a. Stainless steel: ASTM A312, Grade TP 304.5. Color Coating:



a. Fixed, New Concrete, Anchor: Provide anchor for casting into new concrete.b. Fixed, Existing Concrete, Flange, surface mount.c. Security post cover, new post:






AAA. Bollard [Designer’s Designation]: 1. Model: Reliance Foundry; R-8902.2. Size: 36 inches high x 4 1/3 inches diameter.3. Design: Cylindrical with rounded top.4. Material:

a. Stainless steel: ASTM A312, Grade TP 304.5. Color Coating:



a. Fixed, New Concrete, Anchor: Provide anchor for casting into new concrete.b. Fixed, Existing Concrete, Flange, surface mount.c. Security post cover, new post:





2.3 METAL BICYCLE BOLLARDS

A. Bike Bollard [Designer’s Designation]: 1. Model: Reliance Foundry; R-7331-B.2. Size: 39 inches high x 10 inches diameter.3. Design: Cylindrical with tapered bottom, ball top and bike arms.4. Material:



6. Installation:a. Fixed, New Concrete, Anchor: Provide anchor for casting into new concrete.b. Fixed, existing concrete, insert.c. Fixed, existing concrete, adhesive.d. Fixed, existing concrete, flange and insert.


e. Security post cover, new post:1) Security Post: [Steel] [Galvanized steel] pipe, size as shown on Drawings. 2) Footing and Fill: Concrete or mortar, [3000 psi minimum.] [as specified in Section [__ __ __].]

f. Security post cover, existing post.g. Removable, New Concrete, Anchor: Provide anchor and receiver kit.h. Removable, Existing Concrete, Insert: Provide insert and receiver kit.i. Removable, New Concrete, Retractable Receiver: Provide receiver kit.

B. Bike Bollard [Designer’s Designation]: 1. Model: Reliance Foundry; R-7520-B.2. Size: 35 inches high x 15 inches diameter.3. Design: Tapered and fluted with a flat top and bike arms.4. Material:






C. Bike Bollard [Designer’s Designation]: 1. Model: Reliance Foundry; R-7530-B.2. Size: 39 inches high x 10 inches diameter.3. Design: Cylindrical and fluted, with tapered bottom, ball top and bike arms.4. Material:



6. Installation:a. Fixed, New Concrete, Anchor: Provide anchor for casting into new concrete.b. Fixed, existing concrete, insert. c. Fixed, existing concrete, adhesive.d. Fixed, existing concrete, flange and insert.e. Security post cover, new post:


1) Security Post: [Steel] [Galvanized steel] pipe, size as shown on Drawings. 2) Footing and Fill: [3000 psi minimum concrete or mortar.] [[Concrete] [Mortar] as specified in Section [__ __ __].]


D. Bike Bollard [Designer’s Designation]: 1. Model: Reliance Foundry; R-7535-B.2. Size: 39 inches high x 14 inches diameter.3. Design: Cylindrical and fluted, with a rounded top and bike arms.4. Material:






E. Bike Bollard [Designer’s Designation]: 1. Model: Reliance Foundry; R-7538-B.2. Size: 35 inches high x 15 inches diameter.3. Design: Tapered and fluted, with fluted base nautical-styled top and bike arms.4. Material:






e. Security post cover, existing post.f. Removable, New Concrete, Anchor: Provide anchor and receiver kit.g. Removable, Existing Concrete, Insert: Provide insert and receiver kit.h. Removable, New Concrete, Retractable Receiver: Provide receiver kit.

F. Bike Bollard [Designer’s Designation]: 1. Model: Reliance Foundry; R-7539-B.2. Size: 36 inches high x 10 inches diameter.3. Design: Tapered and fluted, with round finial, ball top and bike arms.4. Material:






G. Bike Bollard [Designer’s Designation]: 1. Model: Reliance Foundry; R-7542-B.2. Size: 30 inches high x 10 inches hexagonal base 3. Design: Tapered and fluted, with matching geometric finial and bike arms.4. Material:







H. Bike Bollard [Designer’s Designation]: 1. Model: Reliance Foundry; R-7551-B.2. Size: 36 inches high x 10 inches diameter.3. Design: Tapered with round finial, ball top and bike arms.4. Material:






I. Bike Bollard [Designer’s Designation]: 1. Model: Reliance Foundry; R-7552-B.2. Size: 36 inches high x 10 inches diameter.3. Design: Tapered with round finial, contemporary-styled top and bike arms.4. Material:







J. Bike Bollard [Designer’s Designation]: 1. Model: Reliance Foundry; R-7553-B.2. Size: 32 inches high x 10 inches diameter.3. Design: Tapered with flat disc top and bike arms.4. Material:






K. Bike Bollard [Designer’s Designation]: 1. Model: Reliance Foundry; R-7555-B.2. Size: 35 inches high x 10 inches diameter.3. Design: Tapered with round finial, large ball top and bike arms.4. Material:







f. Removable, New Concrete, Anchor: Provide anchor and receiver kit.g. Removable, Existing Concrete, Insert: Provide insert and receiver kit.h. Removable, New Concrete, Retractable Receiver: Provide receiver kit.

L. Bike Bollard [Designer’s Designation]: 1. Model: Reliance Foundry; R-7561-B.2. Size: 35 inches high x 15 inches diameter.3. Design: Tapered with round finial, ball top and bike arms.4. Material:






M. Bike Bollard [Designer’s Designation]: 1. Model: Reliance Foundry; R-7562-B.2. Size: 35 inches high x 15 inches diameter. 3. Design: Tapered with round finial, contemporary-styled top and bike arms.4. Material:







N. Bike Bollard [Designer’s Designation]: 1. Model: Reliance Foundry; R-7563-B.2. Size: 31 inches high x 15 inches diameter.3. Design: Tapered with round finial, flat disc top and bike arms.4. Material:






O. Bike Bollard [Designer’s Designation]: 1. Model: Reliance Foundry; R-7565-B.2. Size: 34 inches high x 15 inches diameter.3. Design: Tapered with round finial, large ball top and bike arms.4. Material:







f. Removable, New Concrete, Anchor: Provide anchor and receiver kit.g. Removable, Existing Concrete, Insert: Provide insert and receiver kit.h. Removable, New Concrete, Retractable Receiver: Provide receiver kit.

P. Bike Bollard [Designer’s Designation]: 1. Model: Reliance Foundry; R-7571-B.2. Size: 40 inches high x 5 ¾ inches diameter. 3. Design: Cylindrical with round finial, ball top and bike arms.4. Material:






Q. Bike Bollard [Designer’s Designation]: 1. Model: Reliance Foundry; R-7572-B.2. Size: 40 inches high x 5 3/4 inches diameter. 3. Design: Cylindrical with round finial, contemporary-styled top and bike arms.4. Material:







g. Removable, Existing Concrete, Insert: Provide insert and receiver kit.h. Removable, New Concrete, Retractable Receiver: Provide receiver kit.

R. Bike Bollard [Designer’s Designation]: 1. Model: Reliance Foundry; R-7573-B.2. Size: 36 inches high x 5 3/4 inches diameter. 3. Design: Cylindrical with round finial, flat disc top and bike arms.4. Material:






S. Bike Bollard [Designer’s Designation]: 1. Model: Reliance Foundry; R-7575-B.2. Size: 39 inches high x 5 3/4 inches diameter. 3. Design: Cylindrical with round finial, large ball top and bike arms.4. Material:







T. Bike Bollard [Designer’s Designation]: 1. Model: Reliance Foundry; R-7576-B.2. Size: 34 inches high x 5 3/4 inches diameter.3. Design: Cylindrical with round finial, rounded top and bike arms.4. Material:






U. Bike Bollard [Designer’s Designation]: 1. Model: Reliance Foundry; R-7581-B.2. Size: 31 inches high x 15 inches diameter.3. Design: Tapered and fluted, with round finial, flat disc top and bike arms.4. Material:






V. Bike Bollard [Designer’s Designation]:


1. Model: Reliance Foundry; R-7582-B.2. Size: 34 inches high x 15 inches diameter.3. Design: Tapered and fluted, with round finial, large ball top and bike arms.4. Material:






W. Bike Bollard [Designer’s Designation]: 1. Model: Reliance Foundry; R-7589-B.2. Size: 35 inches high x 15 inches diameter.3. Design: Tapered and fluted, with round finial, ball top and bike arms.4. Material:






X. Bike Bollard [Designer’s Designation]: 1. Model: Reliance Foundry; R-7591-B.2. Size: 32 inches high x 10 inches diameter.


3. Design: Tapered and fluted, with round finial, flat disc top and bike arms.4. Material:






Y. Bike Bollard [Designer’s Designation]: 1. Model: Reliance Foundry; R-7592-B.2. Size: 35 inches high x 10 inches diameter.3. Design: Tapered and fluted, with round finial, large ball top and bike arms.4. Material:






Z. Bike Bollard [Designer’s Designation]: 1. Model: Reliance Foundry; R-7593-B.2. Size: 53 inches high x 16 inches diameter.


3. Design: Tapered cylindrical body with round finial, ball top and bike arms.4. Material:






AA. Bike Bollard [Designer’s Designation]: 1. Model: Reliance Foundry; R-7595-B.2. Size: 53 inches high x 16 inches diameter. 3. Design: Tapered cylindrical body with round finial, large ball top and bike arms.4. Material:






BB. Bike Bollard [Designer’s Designation]: 1. Model: Reliance Foundry; R-7598-B.2. Size: 36 inches high x 10 inches diameter.3. Design: Tapered and fluted, with fluted base, nautical-styled top and bike arms.4. Material:


5. Color Coating:a. Type: Polyester powder coat over epoxy primer.


b. Color: [Semi-gloss black with hammered (stippled) texture.] [Dark green.] [Statuary bronze.] [Bengal Stainless.] [Anodized silver.] [Safety yellow.]




CC. Bike Bollard [Designer’s Designation]: 1. Model: Reliance Foundry; R-7691-B.2. Size: 39 inches high x 15 inches diameter. 3. Design: Tapered and fluted, with fluted base, flat disc top and bike arms.4. Material:






DD. Bike Bollard [Designer’s Designation]: 1. Model: Reliance Foundry; R-7736-B.2. Size: 36 inches high x 11 3/4 inches diameter.3. Design: Cylindrical with segmented rings, rounded top and bike arms.4. Material:



6. Installation:a. Fixed, New Concrete, Anchor: Provide anchor for casting into new concrete.


b. Fixed, existing concrete, insert.c. Fixed, existing concrete, adhesive.d. Security post cover, new post:



EE. Bike Bollard [Designer’s Designation]: 1. Model: Reliance Foundry; R-7744-B.2. Size: 44 inches high x 13 inches diameter. 3. Design: Cylindrical with rounded top and bike arms.4. Material:






FF. Bike Bollard [Designer’s Designation]: 1. Model: Reliance Foundry; R-7835-B.2. Size: 35 inches high x 9 1/2 inches diameter. 3. Design: Cylindrical with segmented rings, rounded top and bike arms.4. Material:







g. Removable, Existing Concrete, Insert: Provide insert and receiver kit.h. Removable, New Concrete, Retractable Receiver: Provide receiver kit.

GG. Bike Bollard [Designer’s Designation]: 1. Model: Reliance Foundry; R-7903.2. Size: 36 by 4 1/3 inches.3. Design: Straight base with domed top, annular rings and bike arms.4. Material:



7. Installation:a. Fixed, New Concrete, Embedded.b. Fixed, Existing Concrete, Flange, surface mount.c. Removable, New Concrete, Receiver:


d. Removable, Existing Concrete, Receiver: 1) [Steel ][Stainless steel] receiver with lid.2) [Steel ][Stainless steel] receiver with chain.

HH. Bike Bollard [Designer’s Designation]: 1. Model: Reliance Foundry; R-7903-RSA.2. Size: 36 by 4 1/3 inches.3. Design: Straight base with domed top, annular rings and bike arms.4. Material:

a. Steel: ASTM A36; 25 percent recycled-material content.5. Arms: Polished.6. Color Coating:




d. Removable, Existing Concrete, Receiver:1) [Steel ][Stainless steel] receiver with lid.2) [Steel ][Stainless steel] receiver with chain.

II. Bike Bollard [Designer’s Designation]: 1. Model: Reliance Foundry; R-7904. 2. Size: 36 by 4 1/3 inches.3. Design: Straight base with domed top and bike arms.4. Material:

a. Steel: ASTM A36; 25 percent recycled-material content.5. Arms: Match body.






JJ. Bike Bollard [Designer’s Designation]: 1. Model: Reliance Foundry; R-7904-RSA.2. Size: 36 by 4 1/3 inches.3. Design: Straight base with domed top and bike arms.4. Material:






KK. Bike Bollard [Designer’s Designation]: 1. Model: Reliance Foundry; R-7905.2. Size: 36 by 4 1/3 inches.3. Design: Straight base with domed top, annular rings and round bike arms.4. Material:




1) [Steel ][Stainless steel] receiver with lid.


2) [Steel ][Stainless steel] receiver with chain.d. Removable, Existing Concrete, Receiver:


LL. Bike Bollard [Designer’s Designation]: 1. Model: Reliance Foundry; R-7905-RSA. 2. Size: 36 by 4 1/3 inches.3. Design: Straight base with domed top, annular rings and round bike arms.4. Material:






MM. Bike Bollard [Designer’s Designation]: 1. Model: Reliance Foundry; R-7906.2. Size: 36 by 4 1/3 inches.3. Design: Straight base with domed top and round bike arms.4. Material:






NN. Bike Bollard [Designer’s Designation]: 1. Model: Reliance Foundry; R-7906-RSA. 2. Size: 36 by 4 1/3 inches.3. Design: Straight base with domed top and round bike arms.


4. Material:a. Steel: ASTM A36; 25 percent recycled-material content.

5. Arms: Polished.6. Color Coating:





OO. Bike Bollard [Designer’s Designation]: 1. Model: Reliance Foundry; R-8610-B. 2. Size: 35 by 7.9 inches.3. Design: Straight square base with flat top, composite wood inserts, and bike arms.4. Material:





PP. Bike Bollard [Designer’s Designation]: 1. Model: Reliance Foundry; R-8612-B. 2. Size: 43 by 7.9 inches.3. Design: Straight square base with ball top, composite wood inserts, and bike arms.4. Material:





QQ. Bike Bollard [Designer’s Designation]:


1. Model: Reliance Foundry; R-8903. 2. Size: 36 by 4 1/3 inches.3. Design: Straight base with domed top, annular rings, and bike arms.4. Material:

a. Stainless Steel: Stainless steel: ASTM A312, Grade TP 304.5. Arms: Match body.6. Color Coating:



a. Fixed, New Concrete, Embedded.b. Fixed, Existing Concrete, Flange, surface mount.c. Removable, New Concrete, Receiver:



RR. Bike Bollard [Designer’s Designation]: 1. Model: Reliance Foundry; R-8904.2. Size: 36 by 4 1/3 inches.3. Design: Straight base with domed top and bike arms.4. Material:







SS. Bike Bollard [Designer’s Designation]: 1. Model: Reliance Foundry; R-8905.2. Size: 36 by 4 1/3 inches.3. Design: Straight base with domed top, annular rings, and round bike arms.4. Material:








TT. Bike Bollard [Designer’s Designation]: 1. Model: Reliance Foundry; R-8906. 2. Size: 36 by 4 1/3 inches.3. Design: Straight base with domed top and round bike arms.4. Material:







2.4 FLEXIBLE BOLLARDS

A. Flexible Bollards, General:1. Material: Polyurethane.

a. Thermal stability: Good +/- 10 SHORE D. b. Working Temperature: -40ºC / + 60 ºC.c. Fire resistance: CLASS E. As per UNE-EN-ISO 11925-2:2002

2. Performance Requirements:a. Impact resistance: Test of 50 impacts, bending the bollard through 90º, simulating a 1500kg vehicles at 15km/h.b. Fatigue resistance: Test of 500 impacts, bending the bollard through 45º, at intervals of 30 seconds.

B. Flexible Bollard [Designer’s Designation]: 1. Model: Reliance Foundry; R-83012. Size:


a. 80 cm (31.5 in.) high above gradeb. 100.6 cm (39.4 in) high overall c. 7.6 cm (3 in.) body dia.

3. Weight: 3.6 Kgs. (8 lbs)4. Design: Cylindrical with ball top.5. Color: [Black][Traffic Green][Imitation Stainless Steel][Brown][Red ][Grey].6. Reflective Tape: [Red][White][Yellow][None].7. Installation:

a. Fixed, New Concrete, Embedded.b. Removable, New Concrete, Anchor: Provide [heavy duty][light duty]receiver kit.c. Removable, Existing Concrete, Insert: Provide [heavy duty][light duty]receiver kit.

C. Flexible Bollard [Designer’s Designation]: 1. Model: Reliance Foundry; R-8301[-EX].2. Size:

a. 89.9 cm (35.4 in) high above gradeb. 110 cm (43.4 in.) high overall c. 7.6 cm (3 in.) body dia.

3. Weight: 4.1 Kgs. (9 lbs)4. Design: Cylindrical with ball top.5. Color: [Black][Traffic Green][Imitation Stainless Steel][Brown][Red ][Grey].6. Reflective Tape: [Red][White][Yellow][None].7. Installation:

a. Fixed, New Concrete, Embedded.b. Removable, New Concrete, Anchor: Provide [heavy duty][light duty]receiver kit.c. Removable, Existing Concrete, Insert: Provide [heavy duty][light duty]receiver kit

D. Flexible Bollard [Designer’s Designation]: 1. Model: Reliance Foundry; R-8302.2. Size:

a. 99 cm (35.4 in.) high above gradeb. 110 cm (43.4 in.) high overall c. 10 cm (3.9 in.) body dia.

3. Weight: 3.6 Kgs. (8 lbs)4. Design: Cylindrical with flat top.5. Color: [Black][Traffic Green][Imitation Stainless Steel][Brown][Red ][Grey].6. Reflective Tape: [Red][White][Yellow][None].7. Installation:

a. Fixed, New Concrete, Embedded.b. Removable, New Concrete, Anchor: Provide [heavy duty][light duty]receiver kit.c. Removable, Existing Concrete, Insert: Provide [heavy duty][light duty]receiver kit.

E. Flexible Bollard [Designer’s Designation]: 1. Model: Reliance Foundry; R-8302-FL (flanged).2. Size:

a. 99 cm (35.4 in.) high above grade


b. 99 cm (35.4 in.) high overall c. 10 cm (3.9 in.) body dia.


a. Fixed, Existing Concrete, Surface (Flanged) Mount.b. Fixed, New Concrete, Surface (Flanged) Mount.

F. Flexible Bollard [Designer’s Designation]: 1. Model: Reliance Foundry; R-8303.2. Size:

a. 80 cm (31.5 in.) high above gradeb. 100 cm (39.4 in.) high overall c. 10 cm (3.9 in.) body dia.


a. Fixed, New Concrete, Embedded.b. Removable, New Concrete, Anchor: Provide [heavy duty][light duty] receiver kit.c. Removable, Existing Concrete, Insert: Provide [heavy duty][light duty] receiver kit.

G. Flexible Bollard [Designer’s Designation]: 1. Model: Reliance Foundry; R-8303-FL (flanged).2. Size:

a. 80 cm (31.5 in.) high above gradeb. 10 cm (3.9 in.) body dia.


a. Fixed, New Concrete, Embedded.b. Removable, New Concrete, Anchor: Provide [heavy duty][light duty] receiver kit.

H. Flexible Bollard [Designer’s Designation]: 1. Model: Reliance Foundry; R-8303-EX.2. Size:

a. 99 cm (39 in.) high above gradeb. 131.5 cm (51.8 in.) high overall c. 10 cm (3.9 in.) body dia.



a. Fixed, New Concrete, Embedded.b. Removable, New Concrete, Anchor: Provide [heavy duty][light duty] receiver kit.c. Removable, Existing Concrete, Insert: Provide [heavy duty][light duty] receiver kit

I. Flexible Bollard [Designer’s Designation]: 1. Model: Reliance Foundry; R-8351.2. Size:

a. 101.6 cm (40 in.) high above gradeb. 12.7 cm (5 in.) base dia.

3. Weight: 5.4 Kgs. (12 lbs)4. Design: Cylindrical with domed top.5. Color: [Black ][Blue ][Green ][Red ][Yellow ][Tan ][White].6. Reflective Tape: [Yellow][White][Red][None].7. Installation:

a. Fixed, New Concrete, Embedded.

J. Flexible Bollard [Designer’s Designation]: 1. Model: Reliance Foundry; R-8352.2. Size:

a. 101.6 cm (40 in.) high above gradeb. 15.2 cm (6 in.) body dia.

3. Weight: 7.7 Kgs. (17 lbs)4. Design: Cylindrical with domed top.5. Color: [Black ][Blue ][Green ][Red ][Yellow ][Tan ][White].6. Reflective Tape: [Yellow][White][Red][None].7. Installation:


K. Flexible Bollard [Designer’s Designation]: 1. Model: Reliance Foundry; R-8353.2. Size:

a. 109.2 cm (43 in.) high above gradeb. 20.3 cm (8 in.) base dia.

3. Weight: 10.0 Kgs. (22 lbs)4. Design: Cylindrical with domed cap top.5. Color: [Black ][Blue ][Green ][Red ][Yellow ][Tan ][White].6. Reflective Tape: [Yellow][White][Red][None].7. Installation:


2.5 PLASTIC BOLLARD COVERS

A. Plastic Bollard Covers, General:1. [Add 1 to 3 inches to specified height, to allow for fitting, cutting, foam installation strips, and grade or slope condition.]2. Reflective Tape: 2 strips of 3M Scotchlite Reflective Sheeting Series tape, recessed on bollard.3. Material: Formolene HB5502B, High Density Polyethylene; Hexene Copolyer for Blow Molding.


a. High molecular weight material. Designed for optimum balance of density, molecular weight and molecular weight distribution demonstrating maximum property advantages for large products that require high impact resistance. b. Ultraviolet protection additive. c. Anti Static Package: Combined in manufacturing process of HDPE.d. Abrasion Resistant.e. Environmental Stress Cracks Resistant.f. Flexural modulus: 200,000 psi.g. Tensile Strength: 4,000psi.

4. Installation Accessories: a. Foam Strips: Self-adhesive foam strips, standard for products indicated.b. [Adhesive: Spray, compliant with applicable air quality requirements.]c. [Security/Anti-Ram Bollard Installation Accessories:]

1) Security Post: [Steel] [Galvanized steel] pipe, size as shown on drawings.2) Footing and Fill: Concrete or mortar, [3000 psi minimum.] [as specified in Section [__ __ __].]

B. Plastic Bollard Cover [Designer’s Designation]: a. Model: Reliance Foundry; R-7100.b. Height [52 ]<Insert height> inches.c. Color: [Yellow] [White] [Blue] [Red] [Black] [Gray] [Green] [Orange] [Brown] [Beige].d. Tape Color: [Red] [White] [Blue].

C. Plastic Bollard Cover [Designer’s Designation]: a. Model: Reliance Foundry; R-7101.b. Height [52 ]<Insert height> inches.c. Color: [Yellow] [White] [Blue] [Red] [Black] [Gray] [Green] [Orange] [Brown] [Beige].d. Tape Color: [Red] [White] [Blue].

D. Plastic Bollard Cover [Designer’s Designation]: a. Model: Reliance Foundry; R-7109.b. Height [52 ]<Insert height> inches.c. Color: [Yellow] [White] [Blue] [Red] [Black] [Gray] [Green] [Orange] [Brown] [Beige].d. Tape Color: [Red] [White] [Blue].

E. Plastic Bollard Cover [Designer’s Designation]: a. Model: Reliance Foundry; R-7110.b. Height [64 ]<Insert height> inches.c. Color: [Yellow] [White] [Blue] [Red] [Black] [Gray] [Green] [Orange] [Brown] [Beige].d. Tape Color: [Red] [White] [Blue].

F. Plastic Bollard Cover [Designer’s Designation]: a. Model: Reliance Foundry; R-7111.b. Height [60 ]<Insert height> inches.c. Color: [Yellow] [White] [Blue] [Red] [Black] [Gray] [Green] [Orange] [Brown] [Beige].d. Tape Color: [Red] [White] [Blue].


G. Plastic Bollard Cover [Designer’s Designation]: a. Model: Reliance Foundry; R-7120.b. Height [72 ]<Insert height> inches.c. Color: [Yellow] [White] [Blue] [Red] [Black] [Gray] [Green] [Orange] [Brown] [Beige].d. Tape Color: [Red] [White] [Blue].

H. Plastic Bollard Cover [Designer’s Designation]: a. Model: Reliance Foundry; R-7130.b. Height [72 ]<Insert height> inches.c. Color: [Yellow] [White] [Blue] [Red] [Black] [Gray] [Green] [Orange] [Brown] [Beige].d. Tape Color: [Red] [White] [Blue].

I. Plastic Bollard Cover [Designer’s Designation]: a. Model: Reliance Foundry; R-7140.b. Footprint: Square.c. Height [55 ]<Insert height> inches.d. Color: [Yellow] [White] [Blue] [Red] [Black] [Gray] [Green] [Orange] [Brown] [Beige].e. Tape Color: [Red] [White] [Blue].

J. Plastic Bollard Cover [Designer’s Designation]: a. Model: Reliance Foundry; R-7150.b. Footprint: Square.c. Height [55 ]<Insert height> inches.d. Color: [Yellow] [White] [Blue] [Red] [Black] [Gray] [Green] [Orange] [Brown] [Beige].e. Tape Color: [Red] [White] [Blue].

K. Plastic Bollard Cover [Designer’s Designation]: a. Model: Reliance Foundry; R-7155.b. Footprint: Round.c. Height [60 ]<Insert height> inches.d. Color: [Yellow] [White] [Blue] [Red] [Black] [Gray] [Green] [Orange] [Brown] [Beige].e. Tape Color: [Red] [White] [Blue].

L. Plastic Bollard Cover [Designer’s Designation]: a. Model: Reliance Foundry; R-7171.b. Design: Cylinder with rings and flat top.c. Height [52 ]<Insert height> inches.d. Color: [Yellow] [White] [Blue] [Red] [Black] [Gray] [Green] [Orange] [Brown] [Light Blue].

M. Plastic Bollard Cover [Designer’s Designation]: a. Model: Reliance Foundry; R-7172.b. Design: Cylinder with wide rings.c. Height [53 ]<Insert height> inches.d. Color: [Yellow] [White] [Blue] [Red] [Black] [Gray] [Green] [Orange] [Brown] [Light Blue].


N. Plastic Bollard Cover [Designer’s Designation]: a. Model: Reliance Foundry; R-7173.b. Design: Cylinder with banded top.c. Height [52 ]<Insert height> inches.d. Color: [Yellow] [White] [Blue] [Red] [Black] [Gray] [Green] [Orange] [Brown] [Light Blue].

O. Plastic Bollard Cover [Designer’s Designation]: a. Model: Reliance Foundry; R-7173-L.b. Design: Large cylinder with banded top.c. Height [59.5 ]<Insert height> inches.d. Color: [Yellow] [White] [Blue] [Red] [Black] [Gray] [Green] [Orange] [Brown] [Light Blue].

P. Plastic Bollard Cover [Designer’s Designation]: a. Model: Reliance Foundry; R-7174.b. Design: Cylinder with tapered base and sculpted flat top.c. Height [48.5 ]<Insert height> inches.d. Color: [Yellow] [White] [Blue] [Red] [Black] [Gray] [Green] [Orange] [Brown] [Light Blue].

Q. Plastic Bollard Cover [Designer’s Designation]: a. Model: Reliance Foundry; R-7175.b. Design: Cylinder with angled top.c. Height [57 ]<Insert height> inches.d. Color: [Yellow] [White] [Blue] [Red] [Black] [Gray] [Green] [Orange] [Brown] [Light Blue].


R. Plastic Bollard Cover [Designer’s Designation]: a. Model: Reliance Foundry; R-7176.b. Design: Cylinder with ribbed exterior.c. Height [48 ]<Insert height> inches.d. Color: [Yellow] [White] [Blue] [Red] [Black] [Gray] [Green] [Orange] [Brown] [Light Blue].

2.6 SOLAR-POWERED LIGHTING BOLLARDS

A. Solar Bollard [Designer’s Designation]: 1. Model: Reliance Foundry Solar Light Bollard, Model R-9810.2. Size: 36 inches high x 6 inch diameter body and base.3. Design: Cylindrical with decorative lighted cap.4. Post: ASTM A36 steel; 25 percent recycled-material content; minimum 99

percent recyclable material content.5. Solar Light Cap: Self-contained LED fixture with solar cell.6. Color Coating:

a. Type: Polyester powder coat over epoxy primer.b. Color: [Semi-gloss black with hammered (stippled) texture.] [Dark green.] [Statuary

bronze.] [Bengal Stainless.] [Anodized silver.][Safety yellow.]7. Installation:

a. Fixed, New Concrete, Anchor: Provide anchor for casting into new concrete.b. Fixed, existing concrete, insert.c. Fixed, existing concrete, adhesive: Provide adhesive for installing threaded rods

into existing concreted. Security post cover, new post:

1) Security Post: [Steel] [Galvanized steel] pipe, maximum size as shown on Drawings.


e. Security post cover, existing post, adhesive: Provide concrete anchor for installing threaded rods into existing concrete.

f. Removable, New Concrete, Anchor: Provide anchor and receiver kit.g. Removable, Existing Concrete, Insert: Provide insert and receiver kit.h. Removable, New Concrete, with Retractable Receiver: Provide in-ground receiver

kit.1) Drainage: Drain holes are present at bottom of removable/retractable

installation receiver. Ensure foundation is created with proper drainage to allow for water to run through receiver. At Contractor’s option, install drain tube in threaded drain hole.

B. Solar Bike Bollard [Designer’s Designation]: 1. Model: Reliance Foundry Solar Light Bollard, Model R-9810-B.2. Size: 36 inches high x 6 inch diameter body and base.3. Design: Cylindrical with decorative lighted cap and bike arms.4. Post: ASTM A36 steel; 25 percent recycled-material content; minimum 99


a. Type: Polyester powder coat over epoxy primer.


b. Color: [Semi-gloss black with hammered (stippled) texture.] [Dark green.] [Statuary bronze.] [Bengal Stainless.] [Anodized silver.][Safety yellow.]

7. Installation: a. Fixed, New Concrete, Anchor: Provide anchor for casting into new concrete.b. Fixed, existing concrete, insert.c. Fixed, existing concrete, adhesive: Provide adhesive for installing threaded rods

into existing concreted. Security post cover, new post:

1) Security Post: [Steel] [Galvanized steel] pipe, maximum size as shown on Drawings.


e. Security post cover, existing post, adhesive: Provide concrete anchor for installing threaded rods into existing concrete.

f. Removable, New Concrete, Anchor: Provide anchor and receiver kit.g. Removable, Existing Concrete, Insert: Provide insert and receiver kit.h. Removable, New Concrete, with Retractable Receiver: Provide in-ground receiver

kit.1) Drainage: Drain holes are present at bottom of removable/retractable

installation receiver. Ensure foundation is created with proper drainage to allow for water to run through receiver. At Contractor’s option, install drain tube in threaded drain hole.

C. Solar Bike Bollard [Designer’s Designation]: 1. Model: Reliance Foundry Solar Light Bike Bollard, Flanged, Model R-9810-

FB2. Size: 36 inches high x 6 inch diameter body x 9.12 inch dia. flanged base.3. Design: Cylindrical with flanged base and decorative lighted cap and bike

arms.4. Post: ASTM A36 steel; 25 percent recycled-material content; minimum 99




a. Fixed, New or Existing Concrete: Flange surface mount.

D. Solar Bollard [Designer’s Designation]: 1. Model: Reliance Foundry Solar Light Bollard, Flanged, Model R-9810-FL2. Size: 36 inches high x 6 inch diameter body x 9.12 inch dia. flanged base.3. Design: Cylindrical with flanged base and decorative lighted cap.4. Post: ASTM A36 steel; 25 percent recycled-material content; minimum 99




a. Fixed, New or Existing Concrete: Flange surface mount.


E. Solar-Powered Light Fixture: First Light Technologies Ltd.1. Lamp: Three high-output light-emitting diodes (LEDs); 50,000 hours L70 lifetime.

a. Typical Total Output: 130 lumens.b. Maximum Total Output: 260 lumens at full power.

2. Solar Cell: High-efficiency mono-crystalline cells, encapsulated in high impact, UV resistant polycarbonate.

3. Battery: Recharged by solar cell. a. Type: Pure lead, spiral wound, absorbed glass mat (AGM).b. Battery Recycling Program: EnerSys, enersys.com.

4. Housing: Cast aluminum, alloy AA356.0-F. Minimum 50 percent recycled-material content; minimum 99 percent recyclable material content.a. Housing Fasteners: Tamper-resistant.

5. Safety Standards:a. CE Mark.b. Compliant with RoHS.

6. LED Color Temperature: [Warm White, 3000K][Neutral White, 4300K][Cool White, 5500K].

7. Lighting Distribution: [ASM, Pathway Lighting][SYM, Landscape Highlighting].8. Lighting Programs: Self-contained energy-management micro-controller, using solar cell

input to track site lighting patterns and adjust light output. Provide factory pre-set lighting program:

a. [Program 1: On at dusk, dim to 30 percent after 5 hours; full illumination 1 hour before dawn, off at dawn.]b. [Program 2: On at dusk, off at dawn.]c. [Program 3: On at dusk, off after 6 hours.]d. [Program 4: On at dusk, dim to 30 percent after 6 hours, off at dawn.]e. [Program 5: On at dusk, off after 5 hours; on 1 hour before dawn, off at dawn.]f. [One of above programs, as selected by Owner via Submittal.]

2.7 ACCESSORIES

A. Chain:1. Chain: 5/16-inch galvanized steel chain, Grade 30, with quick-release type connections.] Provide sufficient lengths to provide drape [shown on Drawings.] [acceptable to Architect.]2. Chain Eye: 5/16-inch diameter steel.3. Finish: Powder coated to match bollard finish. [_______________.]

B. Padlock: [Brass][Marine Grade], supplied [supplied by bollard manufacturer][as specified in Section [__ __ __]]. [Key alike.]

PART 3 - EXECUTION

3.1 EXAMINATION

A. Examine paving or other substrates for compliance with manufacturer’s requirements for placement and location of embedded items, condition of substrate, and other conditions affecting installation of bollards.

B. Proceed with installation only after unsatisfactory conditions have been corrected.


http://enersys.com/pdfs/RecycleBro_LoRes_11Dec08.pdf

3.2 INSTALLATION

A. General: Comply with manufacturer’s installation instructions and setting drawings.

B. Damaged, cracked, chipped, deformed or marred bollards are not acceptable. Field touch-up minor imperfections in accordance with manufacturer’s instructions.

C. Plastic Bollard Covers: Install over foam strips [with ][without ]adhesive.

3.3 CLEANING & PROTECTION

A. Protect bollards against damage.

B. Immediately prior to Substantial Completion, clean bollards in accordance with manufacturer’s instructions to remove dust, dirt, adhesives, and other foreign materials.

C. Touch up damaged finishes according to manufacturer’s instructions.

3.4 CLOSEOUT ACTIVITIES

A. Provide executed warranty.

END OF SECTION

Copyright 2012 by Reliance Foundry Co. Ltd.; qualified design and construction professionals may copy for preparation of construction specifications and purchase orders for Reliance Foundry products. Issued November 2012. Subject to change.


Reliance Foundry Bollard Guide...

Documents

Transcript of Reliance Foundry Bollard Guide...