Releasenotes Analyzer Update 2010 08 August
-
Upload
msallah8379 -
Category
Documents
-
view
191 -
download
0
Transcript of Releasenotes Analyzer Update 2010 08 August
Actix Release Notes Analyzer Update – August 2010 1
August 2010
Analyzer Update Release Notes
Actix Release Notes Analyzer Update – August 2010 2
1 In this version
This release contains support for new and updated file formats. There are updates for most technologies that Actix supports, with changes falling under the following categories:
• New collection device support
• Decode improvements
• New attributes / modifications to existing attributes
• New mobile device support in existing formats
• Improvements to existing decodes
• Improvements to event detection
• Format Group issues (for example, binning)
• Stability improvements
• Event detection and Application layer improvements
• Analyzer / Spotlight improvements
• Known issues / obsolescence
Actix Release Notes Analyzer Update – August 2010 3
2 New col lection device or technology support
• Added support for Ascom 5.5
• Added HSPA+ MIMO support for Nemo
• Improved LTE support for Qualcomm chipset
• Added support for.SwissQual Diversity 10.5
• Added support for ZTE APT 1.2.
• Added support for Couei Accuver 1.8
2.1 Agi l en t suppor t
[Case 52645] Load time message filtering is improved for Agilent UMTS log files to facilitate large file loading into Analyzer Classic.
2.2 Ascom suppor t
• Added support for Ascom version 5.5
• [Case 53087] A problem in setting attribute AscomMasterCallMarker / AscomSlaveCallMarker from Ascom version 5.5 log file has been resolved. The following improvement has been made for the IE browser test: a new attribute AscomStartMarker_IE_Browse has been created for the start of the test, HTTP_pagesize and App_Throughput_DL are set from Measurement Results IE Browse.
2.3 Accuver (Couei / Wi re l essLog i x) suppor t
• Added support for Accuver version 1.8.
• [Case 51081] Fixed a problem in loading Accuver log file collected with DRT scanner.
2.4 Datapro suppor t
• Added support for Datapro LTE.
• Added support for Spotlight Data Service Analysis.
• [Case 50419] Set SINR attribute for EVDO scanner.
Actix Release Notes Analyzer Update – August 2010 4
2.5 DingL i suppor t
• Set speed attribute SpeedKph.
• Supports video telephony test.
• In GSM, a dropped call event problem with Sagem OT260 handset has been resolved with filtering corrupted messages.
2.6 Er i csson UETR / GPEH suppor t
• [Case 53017] Fixed the issue where CT_Global_Call_Id remains the same, even after CT_Global_Call_Id_Expired has been pegged. More elements are used to create the call id in order to differentiate calls.
• The GPEH event detection has been improved: a "call drop" event will no longer be pegged along with a "call end" event if the first PS attempt with GMM service Request failed, but was then successful when re-attempted during the same RRC Connection.
• [Case 51577] The following problems with UETR event detection are fixed:
• CallDropped or CallFailed is no longer pegged when a voice call is successfully handover to GSM.
• Call events are no longer pegged in the second half of the call, when the call spans over 2 files.
• Ericsson MTR geolocation is now supported.
• [Case 53459] An issue is now fixed which caused GPEH Data to fail to Geolocate following the PN upgrade to Analyzer AU1007.
2.7 Invex .NxG suppor t
• [Case 52314] The problem caused by corrupted Motorola EGPRS messages has now been fixed. This made Analyzer fail when loading some log files.
2.8 Nemo suppor t
• [Case 47953] If the device name is not empty in the header, it is employed as the stream name. This improvement applies to Nemo FF 2.0 and beyond.
• [Case 50731] A problem is now fixed whereby UMTS Frequencies were incorrectly being mapped under GSM1800. GSM scanner attributes are no longer set from UMTS RF scan messages. Instead, UMTS Uu_Scan_RSSI_By_UARFCN is set.
• Added HSPA+ MIMO support for Nemo.
Actix Release Notes Analyzer Update – August 2010 5
2.9 Qual comm ch ipset suppor t
• Progress in support for LTE. The following attributes are set or created from the Qualcomm LTE chipset:
• LTE_UE_RRC_State
• LTE_UE_LL1_Power_Tx
• LTE_UE_TTI_Count
• LTE_UE_FrameUsage_DL
• LTE_UE_FrameUsage_UL
• LTE_UE_MIMO_1TB_Usage
• LTE_UE_MIMO_2TB_Usage
• LTE_UE_PayloadRate_L1_DL
• LTE_UE_Throughput_L1_DL
• LTE_UE_MAC_Throughput_DL
• LTE_UE_MCS_Average_DL
• LTE_UE_ACK_Rate_DL
• LTE_UE_NACK_Rate_DL
• LTE_UE_TB_Size_Average_DL
• LTE_UE_TB_Size_Max_DL
• LTE_UE_RB_Num_DL
• LTE_UE_RB_Num_UL
• LTE_UE_TB_Size_Average_UL
• LTE_UE_TB_Size_Max_UL
• LTE_UE_MAC_Throughput_UL
• LTE_UE_PhyThroughput_UL
• LTE_UE_Power_Tx
• LTE_UE_WideBand_CQI_Average
• LTE_UE_WideBand_CQI_Cwd0
• LTE_UE_WideBand_CQI_Cwd1
• LTE_UE_RI
• LTE_UE_PMI
• Various issues with HSUPA attribute are fixed. The indices of the array attribute Uu_HSUPA_SGI_Distribution have been rectified to reflect the maximum 38 values that SGI can contain. The correct value to attribute Uu_HSUPA_TB_Size_Average is now set when there are sub frames on DTX.
Actix Release Notes Analyzer Update – August 2010 6
2.10 Ri s ing suppor t
• Set speed attribute SpeedKph.
• Supports video telephony test.
• Supports dynamic header length.
2.11 Rohde & Schwarz suppor t
• Fixed various issues in the LTE scanner attributes: the correct value is now set for attributes LTE_Scan_RSRQ_SortedBy_RSRP and LTE_Scan_RSRQ_SortedBy_RSRP_for_EARFCN.
2.12 Swi ssQual Di vers i ty /Qua l i poc suppor t
[Case 53338] Supports SwissQual Diversity 10.5.
2.13 ZTE APT suppor t
• [Case 53355]Support ZTE APT 1.2.
2.14 Gener i c
• The help comments for LTE attributes have been improved.
• [Case 53550] A new check box has been introduced in the Batch Sector Plot dialog: Zoom to Coverage. If unchecked, the map extents will not be changed during the plots, allowing users to create all the plots with the same bounds.
• [Case 53474] A new feature has been implemented in the Superstreaming dialog, allowing streams to be selected based on a pattern match.
• [Case 51435] A problem has been resolved where the incorrect data radio mode was being reported while the handset was transferring data using GPRS/EDGE.
Actix Release Notes Analyzer Update – August 2010 7
3 Appl ication layer improvements
3.1 LTE suppor t fo r Spot l i ght and Spot l i gh t Data Serv i ce Ana l ys i s
Actix Release Notes Analyzer Update – August 2010 8
3.2 MIMO i n t roduced in to HSPA+ Data Serv i ce Ana lys i s
3.3 Improvement to the UMTS Rad i o Network Exp l orer
• [Case 52380] The definition of Spotlight Interference factor (‘F’ factor) is improved and the online help has been updated to explain how the value should be calculated.
Actix Release Notes Analyzer Update – August 2010 9
4 Functional it ies improvement
4.1 Improvement to the func t i on Expor t Text F i l e
[Case 51525] A problem is now fixed, whereby the exported text file was empty when more than one SectorHandle attribute was picked to be exported.
Actix Release Notes Analyzer Update – August 2010
10
5 Known Issues / Obsolescence
• None.
Actix Release Notes Analyzer Update – August 2010
11
6 Previous Release Notes
These are the notes for the releases from the last 12 months:
• ReleaseNotes_AnalyzerUpdate_2010_07_July.pdf
• ReleaseNotes_AnalyzerUpdate_2010_06_June.pdf
• ReleaseNotes_AnalyzerUpdate_2010_05_May.pdf
• ReleaseNotes_AnalyzerUpdate_2010_04_April.pdf
• ReleaseNotes_AnalyzerUpdate_2010_03_March.pdf
• ReleaseNotes_AnalyzerUpdate_2010_02_February.pdf
• ReleaseNotes_AnalyzerUpdate_2010_01_January.pdf
• ReleaseNotes_AnalyzerUpdate_2009_12_December.pdf
• ReleaseNotes_AnalyzerUpdate_2009_11_November.pdf
• ReleaseNotes_AnalyzerUpdate_2009_10_October.pdf
• ReleaseNotes_AnalyzerUpdate_2009_09_September.pdf
• ReleaseNotes_AnalyzerUpdate_2009_08_August.pdf
Actix Release Notes Analyzer Update – August 2010
12