Relay Panel and Relay Panel Module - Osram€¦ · TM Max ambient temperature +50ºC Input: Class 2...
3
Photo Sensor LCM Light Fixture Wallstation Polaris 3D ® Software Network Switch ENCELIUM EXTEND Ethernet Network Occupancy Sensor SSU PCS/PCW Secure Ethernet (existing) 1 R O O L F 2 R O O L F SIM ENCELIUM EXTEND Manager GreenBus II Network Line Power SIM Relay Panel Light Fixture LCM ENCELIUM EXTEND Manager GreenBus II Network System Architecture This illustration shows how each component is easily integrated into the ENCELIUM EXTEND Networked Light Management System (LMS). GreenBus II is a two-wire communication topology for supplying data and power to the system. Each light fixture, sensor, and wall controller is daisy-chained back to the ENCELIUM EXTEND Manager using pre- terminated ‘click & go’ GreenBus II communication cabling. Managers typically control individual floors and are linked via an Ethernet Network. Internet or LAN connection allows floor plan based control software to be operated anywhere on the network. For reference, the component shown on this data sheet is highlighted. Relay Panel and Relay Panel Module ENCELIUM ® EXTEND Networked Light Management System Architecture Relay Panel The Relay Panel is an addressable lighting control panel that fully integrates with the ENCELIUM ® EXTEND Networked Light Management System (LMS). The Relay Panel allows each relay to be individually controlled and configured to best meet the needs of the facility. Light management strategies such as smart time scheduling, occupancy control and daylight harvesting can be deployed through the use of the relay panel. Each relay can be addressed as an individual zone or as part of a larger zone and is controlled through the Polaris 3D ® software. Navigation is made easy through a floor plan based three-dimensional graphical interface. Multiple panels can be daisy chained as part of the overall ENCELIUM EXTEND architecture through the GreenBus II ® communication network. This is the perfect solution for applications where individual fixture control or dimming is not required. Relay Panel Module The Relay Panel Module is an electronic retrofit module that enables existing relay panels/boxes to be integrated with the ENCELIUM EXTEND Networked Light Management System. The Relay Panel Module can be installed in most standard relay panels utilizing existing electrical wiring and relays. It is mounted in the center of the existing panel (replaces old circuiting) and is wired to the existing relays in the panel. This allows each relay to be addressed individually and provides all of the benefits of using the Relay Panel Module and Polaris 3D control software. www.osram.us/extend Light is OSRAM Key Features & Benefits — Each Relay Panel is individually addressable and is controlled by the Polaris 3D ® Software. — Each panel can be controlled as a zone or as part of a larger zone that makes up an ENCELIUM ® EXTEND Network. — Multiple panels can be daisy chained.
Transcript of Relay Panel and Relay Panel Module - Osram€¦ · TM Max ambient temperature +50ºC Input: Class 2...
Max ambient temperature +50ºCInput: Class 2 Only24V AC, 50/60Hz, min 40VA Relay Panel ModuleEN-RPM-24C-GB2
Install per installation instruction sheet and electrical & building codes. Connect to ENCELIUM GreenBusII System only.CAUTION - To Reduce the Risk of Fire or Electric Shock Do Not Interconnect The Outputs Of Different Class 2 Circuits85-116-DA
Item No 45268
Q1Q2Q3Q4Made in Canada2012201320146NA8
Photo Sensor
LCM
Light Fixture
Wallstation
Polaris 3D® Software
Network Switch
ENCE
LIUM
EXT
END
Ethe
rnet
Net
wor
k
OccupancySensor
SSU
PCS/PCWSecure Ethernet(existing)
1 RO
OLF2 R
OOLF
SIM
ENCELIUM EXTEND Manager
GreenBus II Network
Line Power
SIM
Relay Panel
Light Fixture
LCM
ENCELIUM EXTEND Manager
GreenBus II Network
System ArchitectureThis illustration shows how each component is easily integrated into the ENCELIUM EXTEND Networked Light Management System (LMS). GreenBus II is a two-wire communication topology for supplying data and power to the system. Each light fixture, sensor, and wall controller is daisy-chained back to the ENCELIUM EXTEND Manager using pre-terminated ‘click & go’ GreenBus II communication cabling. Managers typically control individual floors and are linked via an Ethernet Network. Internet or LAN connection allows floor plan based control software to be operated anywhere on the network. For reference, the component shown on this data sheet is highlighted.
Relay Panel and Relay Panel Module
ENCELIUM® EXTEND Networked Light Management System Architecture
Relay Panel
The Relay Panel is an addressable lighting control panel that fully integrates with the ENCELIUM® EXTEND Networked Light Management System (LMS). The Relay Panel allows each relay to be individually controlled and configured to best meet the needs of the facility. Light management strategies such as smart time scheduling, occupancy control and daylight harvesting can be deployed through the use of the relay panel. Each relay can be addressed as an individual zone or as part of a larger zone and is controlled through the Polaris 3D® software. Navigation is made easy through a floor plan based three-dimensional graphical interface. Multiple panels can be daisy chained as part of the overall ENCELIUM EXTEND architecture through the GreenBus II® communication network. This is the perfect solution for applications where individual fixture control or dimming is not required.
Relay Panel Module
The Relay Panel Module is an electronic retrofit module that enables existing relay panels/boxes to be integrated with the ENCELIUM EXTEND Networked Light Management System. The Relay Panel Module can be installed in most standard relay panels utilizing existing electrical wiring and relays. It is mounted in the center of the existing panel (replaces old circuiting) and is wired to the existing relays in the panel. This allows each relay to be addressed individually and provides all of the benefits of using the Relay Panel Module and Polaris 3D control software.
www.osram.us/extend
Light is OSRAM
Key Features & Benefits
— Each Relay Panel is individually addressable and is controlled by the Polaris 3D® Software.
— Each panel can be controlled as a zone or as part of a larger zone that makes up an ENCELIUM® EXTEND Network.
— Multiple panels can be daisy chained.
Relay panel assembly components (for retrofit or extensions) Item # Ordering Description Field Bus Modifiers45268 EN-RPM-24C-GB2 GB2 UL924 Emergency Rated45559 EN-RPM-24CNE-GB2 GB2 Not UL924 Emergency Rated45349 RLY-700 GB2 Relay Panel Assemblies* Meets UL924 Emergency Equipment Item # Ordering Description Rating No. of Relays45500 EN-RPA0R120-347V Y 045501 EN-RPA1R120-347V Y 145502 EN-RPA2R120-347V Y 245503 EN-RPA3R120-347V Y 345504 EN-RPA4R120-347V Y 445505 EN-RPA5R120-347V Y 545506 EN-RPA6R120-347V Y 645507 EN-RPA7R120-347V Y 745508 EN-RPA8R120-347V Y 845509 EN-RPA9R120-347V Y 945510 EN-RPA10R120-347V Y 1045511 EN-RPA11R120-347V Y 1145512 EN-RPA12R120-347V Y 1245513 EN-RPA13R120-347V Y 1345514 EN-RPA14R120-347V Y 1445515 EN-RPA15R120-347V Y 1545516 EN-RPA16R120-347V Y 1645517 EN-RPA17R120-347V Y 1745518 EN-RPA18R120-347V Y 1845519 EN-RPA19R120-347V Y 1945520 EN-RPA20R120-347V Y 2045521 EN-RPA21R120-347V Y 2145522 EN-RPA22R120-347V Y 2245523 EN-RPA23R120-347V Y 2345524** EN-RPA24R120-347V Y 24 45525 EN-RPA0RNE120-347V N/A 045526 EN-RPA1RNE120-347V N/A 145527 EN-RPA2RNE120-347V N/A 245528 EN-RPA3RNE120-347V N/A 345529 EN-RPA4RNE120-347V N/A 445530 EN-RPA5RNE120-347V N/A 545531 EN-RPA6RNE120-347V N/A 645532 EN-RPA7RNE120-347V N/A 745533 EN-RPA8RNE120-347V N/A 845534 EN-RPA9RNE120-347V N/A 945535 EN-RPA10RNE120-347V N/A 1045536 EN-RPA11RNE120-347V N/A 1145537 EN-RPA12RNE120-347V N/A 1245538 EN-RPA13RNE120-347V N/A 1345539 EN-RPA14RNE120-347V N/A 1445540 EN-RPA15RNE120-347V N/A 1545541 EN-RPA16RNE120-347V N/A 1645542 EN-RPA17RNE120-347V N/A 1745543 EN-RPA18RNE120-347V N/A 1845544 EN-RPA19RNE120-347V N/A 1945545 EN-RPA20RNE120-347V N/A 2045546 EN-RPA21RNE120-347V N/A 2145547 EN-RPA22RNE120-347V N/A 2245548 EN-RPA23RNE120-347V N/A 2345549** EN-RPA24RNE120-347V N/A 24*All relay panel assemblies come assembled with a relay panel assembly enclosure, relay panel module, a transformer, and a relay(s) (except for NAED 45500 & 45525 which do not include relays).
**Item Numbers 45524 and 45549 are replacing Item Numbers 45266 and 45267.
EN - RPA 1R NE 120-347V ENCELIUM Relay Panel Assembly # of Relays NE=Does not meet UL924 Input Voltage Blank=UL924 Emergency Equipment rated
Ordering Information
Ordering Guide
Dimensions
*Other relays also available/controllable
— Relay Panel Module Dimensions: 14.5" L X 1.6" H X 1.8" W (368.3mm L X 40.6mm H X 45.7mm W)
— Relay Panel Dimensions: 19.5" H X 18.5" W X 4.0" D (495.3mm H X 469.9mm W X 101.6mm D)
— Relay Panel: 3.8" H X 2.4" W X 1.0" D (96.8mm H X 59.9mm W X 25.4mm D)
— Max. ambient temperature +60°C/140°F
— Suitable for 35mm DIN rail mounting (Relay Panel Module)
— Relay panel module controls 2-wire relays (NAED 45349: RLY-700)*
— Relay Panel Module Input Power Supply: 24 Vac, 50/60 Hz, 1.6 A (40 VA)
— Data Specification: Connects to the polarity independent ENCELIUM® EXTEND Networked Light Management System via two ports that accept GreenBus II® Communication Bus
— Rated for indoor use
— Maximum of 24 relays per Relay Panel Module. Multiple relay panel modules can be connected together to accommodate requirements above 24 re-lays Install in accordance with all applicable national and local electrical and building codes
— FCC Part 15, Class A/ICES-003, Class A
— UL916 (Energy Management Equipment), Emergency rated Relay Panels also meet UL924 (Emergency Lighting Equipment
— Complies with the following electromagnetic requirements: – EN 61000-4-2 – EN 61000-4-4 – EN 61000-4-5
Specifications
BLUE
INP
UT
RED
OU
TP
UT
BLUE
INP
UT
RED
OU
TP
UT
BLUE
INP
UT
RED
OU
TP
UT
BLUE
INP
UT
RED
OU
TP
UT
BLUE
INP
UT
RED
OU
TP
UT
BLUE
INP
UT
RED
OU
TP
UT
BLUE
INP
UT
RED
OU
TP
UT
BLUE
INP
UT
RED
OU
TP
UT
BLUE
INP
UT
RED
OU
TP
UT
BLUE
INP
UT
RED
OU
TP
UT
BLUE
INP
UT
RED
OU
TP
UT
BLUE
INP
UT
RED
OU
TP
UT
BLUE
INP
UT
RED
OU
TP
UT
BLUE
INP
UT
RED
OU
TP
UT
BLUE
INP
UT
RED
OU
TP
UT
BLUE
INP
UT
RED
OU
TP
UT
BLUE
INP
UT
RED
OU
TP
UT
BLUE
INP
UT
RED
OU
TP
UT
BLUE
INP
UT
RED
OU
TP
UT
BLUE
INP
UT
RED
OU
TP
UT
BLUE
INP
UT
RED
OU
TP
UT
BLUE
INP
UT
RED
OU
TP
UT
BLUE
INP
UT
RED
OU
TP
UT
BLUE
INP
UT
RED
OU
TP
UT
41
Relays Relays
2
3
1
2
3
Power supply input24V AC, 60Hz, 1.6A (40VA)Class 2 only
Power fail input
GreenBusII . Connect to Energy Management System only.
Manual Toggle Button
TM
blue
red
WRRelays
blackbluered
GERelays
Depress with tool to unlock
1 23 45 67 89 1011 1213 1415 1617 1819 2021 2223 24
4
TMLED Always On -> 24V and GreenBusII PresentLED Single Blink -> Only GreenBusII PresentLED Double Blink -> Only 24 VAC Present
TM
Max ambient temperature +50ºC
Input: Class 2 Only24V AC, 50/60Hz, min 40VA
Relay Panel ModuleEN-RPM-24C-GB2
Install per installation instruction sheet and electrical & building codes. Connect to ENCELIUM
GreenBusII System only.
CAUTION - To Reduce the Risk of Fire or Electric Shock Do Not
Interconnect The Outputs Of Different Class 2 Circuits 85
-116
-DA
Item No 45268
Q1 Q2 Q3 Q4
Made in Canada
2012 2013 2014 2015
Emergency Lightingand Power Equipment
Energy Management Equipment Subassembly
6NA8
Max ambient temperature +50ºC
Input: Class 2 Only24V AC, 50/60Hz, min 40VA
Relay Panel ModuleEN-RPM-24C-GB2
Install per installation instruction sheet and electrical & building codes. Connect to ENCELIUM GreenBusII System only.CAUTION - To Reduce the Risk of Fire or Electric Shock Do Not Interconnect The Outputs Of Different Class 2 Circuits 85-116-DA
Item No 45268
Q1 Q2 Q3 Q4
Made in Canada2012 2013 2014 2015
Emergency Lightingand Power Equipment
Energy Management Equipment Subassembly
6NA8
19.5"(495.3mm)
18.5"(469.9mm)
4.0"(101.6mm)
Max ambient temperature +50ºC
Input: Class 2 Only24V AC, 50/60Hz, min 40VA
Relay Panel ModuleEN-RPM-24C-GB2
Install per installation instruction sheet and electrical & building codes. Connect to ENCELIUM
GreenBusII System only.
CAUTION - To Reduce the Risk of Fire or Electric Shock Do Not
Interconnect The Outputs Of Different Class 2 Circuits 85
-116
-DA
Item No 45268
Q1 Q2 Q3 Q4
Made in Canada
2012 2013 2014 2015
Emergency Lightingand Power Equipment
Energy Management Equipment Subassembly
6NA8
41
Relays Relays
2
3
1
2
3
Power supply input24V AC, 60Hz, 1.6A (40VA)Class 2 only
Power fail input
GreenBusII . Connect to Energy Management System only.
Manual Toggle Button
TM
blue
red
WRRelays
blackbluered
GERelays
Depress with tool to unlock
1 23 45 67 89 1011 1213 1415 1617 1819 2021 2223 24
4
TMLED Always On -> 24V and GreenBusII PresentLED Single Blink -> Only GreenBusII PresentLED Double Blink -> Only 24 VAC Present
TM
Max ambient temperature +50ºC
Input: Class 2 Only24V AC, 50/60Hz, min 40VA
Relay Panel ModuleEN-RPM-24C-GB2
Install per installation instruction sheet and electrical & building codes. Connect to ENCELIUM
GreenBusII System only.
CAUTION - To Reduce the Risk of Fire or Electric Shock Do Not
Interconnect The Outputs Of Different Class 2 Circuits 85
-116
-DA
Item No 45268
Q1 Q2 Q3 Q4
Made in Canada
2012 2013 2014 2015
Emergency Lightingand Power Equipment
Energy Management Equipment Subassembly
6NA8
14.5"(368.3mm)
1.8"(45.7mm)1.6"
(40.6mm)
3.8"(96.0mm)
1.0"(25.4mm)2.4"
(59.9mm)
Relay Panel Module
Relay
Relay Panel Assembly Enclosure
LMS052R5 4-18
OSRAM SYLVANIA Inc.
200 Ballardvale Street
Wilmington, MA 01887 USA
888-531-7573
www.osram.us/ds
OSRAM is a registered trademark of OSRAM GmbH. ENCELIUM EXTEND, GreenBus II and Polaris 3D are registered trademarks of OSRAM SYLVANIA Inc. Specifications subject to change without notice.
© 2018 OSRAM SYLVANIA Inc.
