Relay Board Leaflet - Auric Solutions Board Leaflet.pdfof 2.1W with all relays energised. the...
-
Upload
trinhthuan -
Category
Documents
-
view
216 -
download
3
Transcript of Relay Board Leaflet - Auric Solutions Board Leaflet.pdfof 2.1W with all relays energised. the...
Auric Solutions Limited • Director: Michael Registered in England No. 4047304 •A National Instruments™ Certified Alliance Partner
RLY-108 TTL Relay BoardThe RLY-108 8-channel TTL Relay B
high-power signals, up to 8A/250AC or
board, USB I/O module, or other electronic equipment.
The RLY-108 provides 8 independently
energised state of the relay. The board requires an external DC power supply of 7 to 32V, drawing a maximum
of 2.1W with all relays energised.
the RLY-108, measuring 110 x 72 mm, to be mounted directly using appropriate standoffs, or it can be mounted
to a panel or DIN rail using the optional universal mounting base available at extra cost.
The RLY-108 is designed and supplied by Auric Solutions
based in the UK. Visit www.auricsolutions.com to download the datasheet
enquiries or orders to [email protected].
TTL IN
COM
Director: Michael J Miles, PhD 4 Maple Close, Emsworth, Hampshire• VAT 760 3785 19 +44 (0) 1243 389712
A National Instruments™ Certified Alliance Partner [email protected]
108 TTL Relay Boardchannel TTL Relay Board is a simple, low-cost solution to the common
A/250AC or 5A/30VDC, from standard 5V/TTL signals generated either by a PC I/O
board, USB I/O module, or other electronic equipment.
8 independently-controlled SPDT (SPCO) relays, each with an LED to indicate the
energised state of the relay. The board requires an external DC power supply of 7 to 32V, drawing a maximum
of 2.1W with all relays energised. A special 5V version is available on request. Various mounting options allow
108, measuring 110 x 72 mm, to be mounted directly using appropriate standoffs, or it can be mounted
to a panel or DIN rail using the optional universal mounting base available at extra cost.
108 is designed and supplied by Auric Solutions Ltd, a National Instruments Certified Alliance Partner
.auricsolutions.com to download the datasheet or to place an order
Experts in LabVIEW™ Software Development and Systems Integration for Test and Measurement
• 8 channels of 5V/TTL input signals
• Active-high input logic
• SPDT (SPCO) relay on each channel
• Each relay has a N/O, N/C, and COM terminal
• Screw terminals for all wiring connections
• 7-32 V DC supply input (2.1W max.)
• Relay contacts rated for 8A/250VAC or
• Built as a single-sided PCB with various mounting options
• LED for each channel (relay energised) and for 5V supply rail
• 110 x 72 mm PCB footprint
• £119 + VAT supplied as board only
• £129 + VAT supplied on a universal mounting base
www.auricsolutions.com
+5V+5V
0V
Close, Emsworth, Hampshire PO10 7RJ, UK 1243 389712 • +44 (0) 7968 470945
[email protected] • www.auricsolutions.com
108 TTL Relay Board common challenge of switching
TTL signals generated either by a PC I/O
controlled SPDT (SPCO) relays, each with an LED to indicate the
energised state of the relay. The board requires an external DC power supply of 7 to 32V, drawing a maximum
Various mounting options allow
108, measuring 110 x 72 mm, to be mounted directly using appropriate standoffs, or it can be mounted
to a panel or DIN rail using the optional universal mounting base available at extra cost.
Ltd, a National Instruments Certified Alliance Partner
or to place an order. Send email
Experts in LabVIEW™ Software Development and Systems Integration for Test and Measurement
TTL input signals
relay on each channel
has a N/O, N/C, and COM terminal
Screw terminals for all wiring connections
32 V DC supply input (2.1W max.), 5V version also available
A/250VAC or 5A/30VDC
with various mounting options
LED for each channel (relay energised) and for 5V supply rail
+ VAT supplied as board only
universal mounting base
www.auricsolutions.com/TTL-Relay-Board.html
C
NO
NC
RLY