TOO EASY WITH TOYESI

Australian Designed & Built

Indoor Aquatic Heating Systems

PCVER - Indoor Aquatic Solutions

Passive Cooling, Dehumidification, Ventilation & Energy Recovery Solutions

PCVER - Indoor Aquatic Solutions

Ideal for Swim Schools, Apartment Pools & Other Indoor Swimming Pool & Aquatic Applications

The Indoor Heated Aquatic Humidity BattleAquatic environments create rising latent heat (water vapour) through evaporation,

and heated water only increases the heat and water loss into the surrounding air. In

outdoor pools this heated water vapour just dissipates into the environment.

However, in indoor situations this moisture is trapped inside the room. This can cause

fogging and water to drip off ceilings, walls, and windows. Rust, mildew and mould

can begin to appear and human comfort levels diminish. A battle that can be costly

to combat. Toyesi PCVER System is a great value solution to combat humidity issues.

✓ Green Environmental Venting System

✓ 1 Unit – multiple processes, saves on capital

costs & running costs.

✓ Waste Energy Capture & Reuse

✓ Pool heating - Extremely Energy Efficient

✓ COPs of 5 to 10+ achievable all year round

✓ Active & Passive Ventilation

✓ Room temperature conditioning & cooling

✓ Passive Dehumidification – Up to 20 L/hr. or more

✓ Reusable Condensate Water – Returnable to pool

✓ Advanced system protect features including: Flow

switch, low and high pressure cut out switches.

✓ Advanced Defrost intelligence to minimise down

time.

✓ Prihoda Fabric Ducting – assorted colours

Ke

y F

ea

ture

s

PCVERLower Environmental Impact & Financial Befits

Cost Saving Solution Toyesi has spent many hours of research in developing a system to battle indoor pool heating

and humidity issues, but at the same time help reduce running costs, and significantly reduce

wasted energy losses, yet provide a system with a significantly lower capital equipment costs

than buying multitude of equipment to achieve the same results. “A Best Bang for The Buck

Solution.”

How does it work?

Dehumidification & VentilationUsing the coupling of Toyesi’s proprietary Smart Transthermal Heat Pump technology with

dehumidification technology, we can draw air from the pool room, remove some of the latent

moisture from the air, and create significant airflow by venting back the cooler drier air.

Energy capture & Pool HeatingAt the same time, we capture the heat load that was lost from the pool utilising our heat pump

technology and apply it directly back into the pool where it belongs. This process also

increases our heat pump efficiencies by utilising yearlong predictable heat loads regardless of

outdoor ambient conditions, which also adds to reducing overall running costs.

Capital and Running Cost SavingsUtilising our efficient PCVER system to do the work of a pool heater, ventilator, dehumidifier

and pool room temperature manager, we can significantly reduce the overall capital

equipment outlay. Also, overall running costs will be much lower due to only having to run one

efficient system.

Prihoda Ducting

• Standard PMS Colour Range • Custom Colours

• Logos & Inscriptions

• Custom Patterns, Images and Photos

• Assorted Shapes, Quarter, half and full

round options

• Easy hangable and Washable

Proudly an Australian company since it’s creation in 1989.

•Australian Manufactured Heat Pumps

•30+ Years of industry experience

•Immense Tacit Knowledge

•Designed, Manufacture, Tested & Supported Right Here in Australia

•Local supplier, Local Support, Local Knowledge

Eco-Friendly Energy Efficient Design•Industry leader in efficient heat pumps since 1989

•Typical COPs of 4 to 10 or more achievable, pending set up

•Up to 1000% more efficient than other heating technologies

•Water Balance Kits & COP Gauges as standard for tweaking performance

•R407C & R134A Refrigerants Used

Unmatched Design Flexibility•Because we manufacture our own equipment, we have this unmatched flexibility.

•Customisable Chassis – Low-line, Slim-line, stackable, 304 or 316 Stainless Steel &

Coatings.

•Heat Exchanger Options – Copper-Nickle & Titanium options

•Standard outdoor designs, Dedicated In-plant systems

•Sound Attenuation, Ducting and more.

•New Transthermal Technology offering amazing multi-function heat pumps.

True Green Solution•Energy Efficient

•Long life-cycle design

•Serviceable for life

•Minimum plastics used

•Design to be as close to 100% recyclable as possible.

•Being an Australian Manufacture means we must build to Australian standards.

•Multi-function Transthermal Technology unique to Toyesi

The Specialists in Water Heating and Chilling

Toyesi Pty Ltd.

2 / 27 Binney Road, Kings Park NSW 2148P – 02 9679 9400 E – info@toyesi.com.au W- www.toyesi.com.au

ABN:33 003 133328 ARC Licence RTA AU02886