Reggiani 02 Catalogue 2010 Recessed Luminaires

8/2/2019 Reggiani 02 Catalogue 2010 Recessed Luminaires

1/166


2/166333

RECESSEDLUMINAIRES

Recessed luminaires blendin best with the architecture:the lighting bodies hidetheir technical structurein the false ceiling, tokeep the aesthetic impacton their surroundings tothe minimum. They areextremely versatile and canbe used for both directedand accent lighting aswell as for softer ambientlighting.

UNISIO

UNIMOSA

BISIO

SOMBRA

SOMBRADO

DOMINO

VARIOS

INDIOS

MOSAICO

WINDOW

SUPERAXEL

SUPERTECHNE

MIMO

DOWNSPOT

WINGO

LOW VOLTAGE


3/16634

Fixed recessed luminaire

RECESSED LUMINAIRESUnisio

Unisio is the recessedluminaire with exceptionalvisual comfort that is perfect

for fixed accent lighting;it comes in three differentdiameters, with bezel ortrimless. It is highly versatileso it can be used for differentapplications ranging frominterior lighting of smallspaces to large spaces withceiling heights of morethan six metres. The smallversion is well suited tomuseums, boutiques and

homes.The larger versions aresuitable for lighting hotels,museum areas, showroomsand shopping centres as wellas transit areas in railways

stations and airportsbecause their higher wattagemeans they can also be

installed at considerableheights.The coloured dichroic filtersand optics in the colourversion can be used to createlots of stage effects andplays of light.

DesignFabio Reggiani


4/16635

AUDI TerminalSydney, Australia

UnisioFixed recessed luminaire

RECESSED LUMINAIRES


5/16636

Body and anti-glare shield

Die-cast aluminium.

LED LUCE systemConsisting of metallisedpolycarbonate reflector (withlight collimator for symmetric

beams) and polycarbonatesafety shield (clear for verynarrow beams, satin for narrow,medium and wide beams andsatin/prismatic for the WallWasher Mira version).

IOS (Interchangeable OpticalSystem)Consisting of a 99.99% purealuminium reflector withtwist-lock fixing system andtempered safety glass (clearfor narrow beams, microspherefor medium and wide beams,prismatic for the Wall WasherMira version). The specialknurling on the outer edgemakes the reflector easy to gripand to attach to the luminaire.

Interchangeable optics

Unisio can change the widthof the light beam (very narrow,narrow, medium, wide, long)and its colouring (green, light

blue, yellow, red) using the IOSinterchangeable optics withtwist-lock fixing system; easy toreplace with a simple twist. TheIOS optics can also be boughtseparately.

Control gear technologies

Pre-wired and fitted with multi-core cable (with silicone outerprotective sheath and Teflon-coated inner wires) completewith a quick-fit plug to connectto the socket on the luminaire.

For LED LUCE:constant current driver.

For metal halide lamps:HF or HPF control gear (digitalsuperimposed timed safetyignitor with burnt-out lampcontrol), low loss power supply(with thermal circuit breakerand power factor correctioncapacitor).

IOS InterchangeableOptical System

Slightly slanted bezelwith minimalist designfor improved grip toceiling

Built-in anti-glareshield, for excellentvisual comfort


RECESSED LUMINAIRES

Standard finishes

10 white28 metallised grey

SizesUnisio comes in three cut-outsizes: 100 mm, 130 mmand 195 mm.

ClikFixretainerdevice

Quick-fit plug


6/16637

LED LUCE is the new Reggiani lighting system with high-powerLED technology (16 watts, 800 Lm, CRI 90, 3000 K). LED LUCE has

an excellent white colour, 50,000-hour lifetime, low consumption,and is environmentally friendly and maintenance-free, making itan excellent alternative to traditional light sources.

The IOS System combines the luminous efficiency of the optics(up to 90%) with the greatest ease of installation based

on the twist-lock fixing system. A wide range of colours, sizes,light sources and light beams make it possible to effectively light,and still save energy. It only takes a few seconds to changethe colour or shape of the light beam.


RECESSED LUMINAIRES

TRIMLESS WITH BEZEL TRIMLESS WITH BEZEL

Extensive light beam selection (21 different optics, for symmetric beamsfrom 2x5 to 2x39 as well as Wall Washer Mira beams) to maximiseefficiency and versatility of the lighting design layout.

Types of installation

Trimless:By inserting the spotlight support in theplasterboard false ceiling (12.5 mm or 15 mmthick for 100 mm and 130 mm; 9 mm,12.5 mm or 15 mm thick for 195 mm)and smoothing plaster around the cut-out.

With bezel:By overlapping the bezel over the cut-out in thefalse ceiling and then fixing it with the innovativeClikFix retainer device (for luminaires with 130 mm and 195 mm).


7/166

Unisio RECESSED LUMINAIRESFixed recessed luminaire

38

Fixed comfort recessed luminaireBody: die-cast aluminiumAnti-glare shield: die-cast aluminium, integrated into the luminaire bodyInstallation: Trimless: by inserting the spotlight support in the false ceiling (12.5-15 mm thick for luminaires with 100/130 cut-outand 9-12.5-15 mm thick for luminaires with 195 cut-out) and smoothing plaster around the cut-out.With bezel: by overlapping thebezel on the cut-out in the false ceiling and in luminaires with 130/195 mm cut-out, using the innovative ClikFix retainer device to holdthe bezel in place

Control gear technologies: constant current driver for LED LUCE l ight sources and HF or HPF control gear for metal halide lamps,provided with multi-core cable (with silicone outer protective sheath and Teflon-coated inner wires) complete with a quick-fit plug toconnect to the socket on the luminaire

Glow wire: = >850 - in compliance with standard IEC EN 60598-1:2008 Annex ZC (13.3)Standard finishes: 10 white 28 metallised grey

www.reggiani.net/code

Trimless With bezel Control gear Watt()

EfficacyKG

0.31005.00 0.30005.00 driver 1x16 0.78 2x11 0.81+0.21

0.31006.00 0.30006.00 driver 1x16 0.77 2x18 0.81+0.21

0.31007.00 0.30007.00 driver 1x16 0.80 2x25 0.81+0.21


EfficacyKG

0.31025.00 0.30025.00 driver 1x16 0.89 2x 6 0.99+0.21

0.31024.00 0.30024.00 driver 1x16 0.85 2x 9 0.99+0.21

0.31026.00 0.30026.00 driver 1x16 0.85 2x12 0.99+0.21

0.31027.00 0.30027.00 driver 1x16 0.80 2x16 0.99+0.21

0.31028.00 0.30028.00 driver 1x16 0.79 2x27 0.99+0.21

0.31029.00 0.30029.00 driver 1x16 0.66 Wall Washer Mira 0.99+0.21

Plug and Play: recessed luminaire with LED LUCE LL1 + driverLight source: LED LUCE (16 W, 800 lm, 3000 K, CRI 90), see pages 8-15 Total power consumption: LED LUCE + driver = 18 WStandard finishes: 10 white 28 metallised grey (for luminaires with bezel only; the trimless luminaires have no finish, the visible part of theanti-glare shield is always matt black)

Accessories: (see page 41) 0.35000.00 / 0.35001.00 / 0.35002.00 (IOS) Interchangeable optical system 0.35070.00 Emergency pack

0.35100.00 Extension lead 0.10099.00 Hole cutter handle 0.11110.00 Hole cutter, 100 mm

Plug and Play: recessed luminaire with LED LUCE LL2 + driverLight source: LED LUCE (16 W, 800 lm, 3000 K, CRI 90), see pages 8-15Total power consumption: LED LUCE + driver = 18 W

Accessories: (see page 41) 0.35049.00 / 0.35050.00 / 0.35051.00 / 0.35052.00 / 0.35053.00 / 0.35054.00 (IOS) Interchangeable optical system 0.35070.00 Emergency pack 0.35100.00 Extension lead 0.10099.00 Hole cutter handle 0.11330.00 Hole cutter, 130 mm

100

130

117

130

Trimless With bezel

IP20

IP43

LL1 - Three beam widths :narrow, medium and wide.50 mm IOS reflector madefrom metallised polycarbonate(with light collimator for narrowand medium beams).Clear polycarbonate safetyshield.

100mm driver

130x60x35h mm

130

140 140

138

Trimless With bezel

LL2 - Six beam widths:very narrow, narrow, medium, wideand Wall Washer Mira.80 mm IOS reflector made frommetallised polycarbonate (with

light collimator for symmetricbeams).Polycarbonate safety shield: clear,satin and satin/prismatic for theWall Washer Mira version.

130mm driver

130x60x35h mm

Kit

Kit

IP20

IP20


8/166


39

Luminaire for low voltage halogen lamps with built-in reflector, 20 W/35 W/50 WTerminal board: IP30, complete with cable glandWithout safety glass

Accessories: (see page 41) 0.10099.00 Hole cutter handle 0.11110.00 Hole cutter, 100 mm

Luminaire for mains voltage halogen lamps with built-in reflector, 50 WTerminal board: IP30, complete with cable gland.Without safety glass

Accessories: (see page 41) 0.10099.00 Hole cutter handle 0.11110.00 Hole cutter, 100 mm

100

130 130

117

Trimless With bezel

100mm

QR-CB

GU 5.3

HI-SPOT

GZ 10

Trimless With bezel Control gear Watt KG

0.13301.00 0.13300.00 Mains voltage 1x50 of the lamp 0.51

IP20

IP23

IP20

IP23

Trimless With bezel Transformer Watt KG

0.13303.00 0.13302.00 not included 1x20/35/50 of the lamp 0.51

CDM-TC

G8.5

Kit: luminaire + IOS + control gear for metal halide lamps, 20 W/35 W/70 W

Accessories: (see page 41) 0.11300.00 / 0.11301.00 / 0.11302.00 / 0.11303.00 (IOS) Interchangeable optical system 0.11330.00 Hole cutter, 130 mm 0.10099.00 Hole cutter handle

130

140 140

138

Trimless With bezel

130mm

Four beam widths:narrow, medium, wideand Wall Washer Mira.80 mm IOS reflector madefrom 99.99% pure aluminium;twist-lock fixing system;tempered safety glass (clear,microsphere and prismatic forthe Wall Washer Mira version).

IP20

IP23 13331/13330

HF

HPF

210x131x77h mm

160x90x40h mm


EfficacyKG

0.13333.00 0.13332.00 HF 1x20 0.84 2x 7 0.54+0.27

0.13335.00 0.13334.00 HF 1x20 0.79 2x17 0.54+0.27

0.13337.00 0.13336.00 HF 1x20 0.77 2x28 0.54+0.27

0.13339.EV 0.13338.EV HPF 1x35 0.84 2x 7 0.54+1.32

0.13345.00 0.13344.00 HF 1x35 0.84 2x 7 0.54+0.36

0.13341.EV 0.13340.EV HPF 1x35 0.80 2x17 0.54+1.32

0.13347.00 0.13346.00 HF 1x35 0.80 2x17 0.54+0.36

0.13343.EV 0.13342.EV HPF 1x35 0.76 2x28 0.54+1.32

0.13349.00 0.13348.00 HF 1x35 0.76 2x28 0.54+0.36

0.13351.00 0.13350.00 HF 1x70 0.82 2x 8 0.54+0.40

0.13353.00 0.13352.00 HF 1x70 0.81 2x17 0.54+0.40

0.13355.00 0.13354.00 HF 1x70 0.84 2x29 0.54+0.40

Kit


9/166


40

CDM-T

G 12

Kit: luminaire + IOS + control gear for metal halide lamps, 20 W/35 W/70 W/150 W

Accessories: (see page 41) 0.11310.00 / 0.11311.GS / 0.11312.GS / 0.11313.00 (IOS) Interchangeable optical system 0.11345.00 Hole cutter, 195 mm 0.10099.00 Hole cutter handle

195

200

212

200

Trimless With bezel

195mm

HF

HPF

210x131x77h mm

160x90x40h mm

Four beam widths:narrow, medium, wideand Wall Washer Mira.

130 mm IOS reflector madefrom 99.99% pure aluminium;twist-lock fixing system;tempered safety glass (clear,microsphere and prismatic forthe Wall Washer Mira version).

IP20

IP23 13441/13440

Trimless With bezel Control gear Watt ()Efficacy

KG

0.13570.00 0.13569.00 HF 1x 20 0.89 2x 7 0.93+0.27

0.13572.00 0.13571.00 HF 1x20 0.84 2x11 0.93+0.27

0.13574.00 0.13573.00 HF 1x20 0.83 2x25 0.93+0.27

0.13443.EV 0.13442.EV HPF 1x35 0.90 2x 7 0.93+1.32

0.13449.00 0.13448.00 HF 1x35 0.90 2x 7 0.93+0.36

0.13445.EV 0.13444.EV HPF 1x35 0.85 2x11 0.93+1.32

0.13451.00 0.13450.00 HF 1x35 0.85 2x11 0.93+0.36

0.13447.EV 0.13446.EV HPF 1x35 0.84 2x25 0.93+1.32

0.13453.00 0.13452.00 HF 1x35 0.84 2x25 0.93+0.36

0.13455.EV 0.13454.EV HPF 1x70 0.81 2x 7 0.93+1.72

0.13461.00 0.13460.00 HF 1x70 0.81 2x 7 0.93+0.40

0.13457.EV 0.13456.EV HPF 1x70 0.80 2x11 0.93+1.72

0.13463.00 0.13462.00 HF 1x70 0.80 2x11 0.93+0.40

0.13459.EV 0.13458.EV HPF 1x70 0.81 2x25 0.93+1.72

0.13465.00 0.13464.00 HF 1x70 0.81 2x25 0.93+0.40

0.13467.EV 0.13466.EV HPF 1x150 0.77 2x 7 0.93+2.62

0.13473.00 0.13472.00 HF 1x150 0.77 2x 7 0.93+0.64

0.13469.EV 0.13468.EV HPF 1x150 0.79 2x11 0.93+2.62

0.13475.00 0.13474.00 HF 1x150 0.79 2x11 0.93+0.64

0.13471.EV 0.13470.EV HPF 1x150 0.79 2x24 0.93+2.62

0.13477.00 0.13476.00 HF 1x150 0.79 2x24 0.93+0.64

Special version Lamp Watt Trimless With bezel

For technical detailsvisit our website:


130mmQT-12/12V 75W

HF0.13323.00

2x 90.13325.00

2x120.13327.00

2x150.13322.00

2x 90.13324.00

2x120.13326.00

2x15

QT-12/24V

150WHF

0.13323.002x 6

0.13325.002x17

0.13327.002x20

0.13322.002x 6

0.13324.002x17

0.13326.002x20

195mm

QT-14 75WHF

0.13497.002x 8

0.13499.002x11

0.13501.002x25

0.13496.002x 8

0.13498.002x11

0.13500.002x25

SDW-TG 50WHF

0.13483.002x 5

0.13485.002x 9

0.13487.002x13

0.13482.002x 5

0.13484.002x 9

0.13486.002x13

SDW-TG 100WHF

0.13489.002x 8

0.13491.002x11

0.13493.002x15

0.13488.002x 8

0.13490.002x11

0.13492.002x15

Kit


10/16641

Unisio ACCESSORIESFixed recessed luminaire

Extension lead for LED LUCE luminaires Three-metre, two-corecable complete with quick-fit plug and socket

Finish

0.35100.00 00

Hole cutter handle

The handle fits all hole cutters which are available in a range ofdiameters

Finish

0.10099.00 00

Hole cutter

Finish

0.11100.00 00 for 100 mm cut-outs0.11330.00 00 for 130 mm cut-outs0.11345.00 00 for 195 mm cut-outs

Shield finish

Clear

0.35000.00 2x11 000.35001.00 2x18 000.35002.00 2x25 00

Shield finish0.35050.00 2x 6 00 Clear0.35049.00 2x 9 00 Sat in0.35051.00 2x12 00 Sat in0.35052.00 2x16 00 Sat in0.35053.00 2x27 00 Sat in0.35054.00 Wall Washer Mira 00 Satin/prismatic

80mm

130mm

50mm

80mm

Interchangeable optical system to be purchased in the required finish to change the width and colour of the light beam.

The abbreviation GS identifies the special finish of the safety glass with "clear microsphere centre and matt smooth edge", standard feature for the Unisio luminaires andavailable in finish 00 only.The standard IOS version (microsphere on the whole safety glass) must be requested for all other finishes.

Filter finishes

Glass f il te rs G lass s elec ti ve fi lte rs fo r l ighting f oods tu ff s Co loured d ic hr oi c g lass fi lt er s

Clear I R Anti UV Green Light blue Orange Pink Blue Green Yellow Red

0.11310.00 2x 7 00 59 79 64 65 66 67 74 75 76 770.11311.GS 2x11 000.11312.GS 2x25 / 2x24 000.11311.00 2x11 59 79 64 65 66 67 74 75 76 770.11312.00 2x25 / 2x24 59 79 64 65 66 67 74 75 76 770.11313.00 Wall Washer Mira 00

Filter finishes

Glass f il te rs G lass s elec ti ve fi lte rs fo r l ighting f oods tu ff s Co loured d ic hr oi c g lass fi lt er s


0.11300.00 2x 7 / 2x 8 00 59 79 64 65 66 67 74 75 76 770.11301.00 2x17 00 59 79 64 65 66 67 74 75 76 770.11302.00 2x28 / 2x29 00 59 79 64 65 66 67 74 75 76 770.11303.00 Wall Washer Mira 00

Emergency pack for LED LUCE luminaires including Ni/Cd batterywith 1h back-up

Finish

0.35070.00 1x16W 000.35075.00 4x16W 00


11/16642

Unisio also comes in thehigh power version with fourLED LUCE modules and Dark

Light reflector, particularlysuitable for lighting areaswhere high visual comfortis required and for usewith video terminals. Thisluminaire is very suitable forlighting large spaces or foruse at substantial heights.


RECESSED LUMINAIRES



12/16643

Benetton StorePadua, Italy


RECESSED LUMINAIRES


13/16644

Benetton StorePadua, Italy


RECESSED LUMINAIRES


an excellent white colour, 50,000-hour lifetime, low consumption,and is environmentally friendly and maintenance-free, makingit an excellent alternative to traditional light sources.

Body

Die-cast aluminium.

ReflectorFour-compartment Dark Lightreflector made from metallisedpolycarbonate, with scratchresistant UV-polymerizedprotective coating.


Trimless:By inserting the spotlightsupport in the plasterboard

false ceiling (9 - 12.5 - 15 mmthick) and smoothing plasteraround the cut-out.With bezel:By overlapping the bezel overthe cut-out in the false ceiling.


Constant current driver fittedwith two-core cable (withsilicone outer protective sheathand Teflon-coated inner leads)complete with a quick-fit plug

to connect to the socket on theluminaire.

Light source

Four LED LUCE modules.

Standard finishes

10 white, 28 metallised grey(for luminaires with bezel only;the trimless luminaires have nofinish, the reflector is the onlyvisible part).

TRIMLESS WITH BEZEL


14/166

Fixed comfort recessed luminaireBody: die-cast aluminiumOptics: 4-compartment DARK LIGHT reflector made from metallised polycarbonate, with scratch resistant UV-polymerized protectivecoating Installation: Trimless: by inserting the spotlight support in the false ceiling (9-12.5-15 mm thick) and smoothing plaster aroundthe cut-out.With bezel: by overlapping the bezel on the cut-out in the false ceiling and using the innovative ClikFix retainer device tohold in place

Control gear technologies: PWM driver fitted with two-core cable (with silicone outer protective sheath and Teflon-coated inner wires)

complete with a quick-fit plug to connect to the socket on the luminaireLight source: 4 x LUCE 1 (4x16 W, 3200 lm, 3000 K, CRI 90), see page 8-15Total power consumption: 4 x LUCE 1 + driver = 68.5 WGlow wire: = >850 - in compliance with standard IEC EN 60598-1:2008 Annex ZC (13.3)Standard finishes: 10 white 28 metallised grey (for luminaires with bezel only; the trimless luminaires have no finish, the reflector isthe only visible part)



45


EfficacyKG

0.31030.00 0.30030.00 driver 4x16 0.83 2x20 2.09+0.10

Plug and Play: recessed luminaire with LED LUCE LL3 + driver

Accessories: (see page 41) 0.35075.00 Emergency pack 0.35100.00 Extension lead 0.11345.00 Hole cutter, 195 mm 0.10099.00 Hole cutter handle

195

185

212

185

Trimless With bezel

IP20

IP20 195mm driver

130x65x40h mm

Kit


15/16646

Unimosa is a compact,adjustable recessedluminaire that offers both

the visual comfort of theUnisio fixed recessedluminaire along with theflexible adjustment of thelight beam. The universaljoint makes it possibleto adjust the luminaire360 horizontally and 20vertically. The versatilityof Unimosa is particularlyappreciated in boutiques,exhibition spaces and in all

those places where ambient,high quality lighting thatgives a stronger accent tosome spots is required.

UnimosaAdjustable recessed luminaire

RECESSED LUMINAIRES


16/16647

Newlook Metro CentreNewcastle, Great Britain


RECESSED LUMINAIRES


17/16648


Body

Die-cast aluminium.

IOS (Interchangeable OpticalSystem)Consisting of a 99.99% purealuminium reflector withtwist-lock fixing system andtempered safety glass (clearfor narrow beams, microspherefor medium and wide beams,prismatic for the Wall WasherMira version). The specialknurling on the outer edge

makes the reflector easy to gripand to attach to the luminaire.

Adjustment

Universal joint - horizontal 360,vertical 20.

HF control gear

Pre-wired, fitted with multi-core cable (with silicone outerprotective sheath and Teflon-coated inner wires) completewith a quick-fit plug to connect

to the socket on the luminaire.

Standard finishes

10 white21 black28 metallised grey


RECESSED LUMINAIRES

The IOS System combines the luminous efficiency of the optics(up to 90%) with the greatest ease of installation based on the

twist-lock fixing system. A wide range of colours, sizes, lightsources and light beams make it possible to effectively light,and still save energy. It only takes a few seconds to changethe colour or shape of the light beam.

Attachmentwith retainerdevice

IOSInterchangeableOptical System


18/166

Adjustable recessed luminaireBody: die-cast aluminiumAdjustment: through universal joint - horizontal 360, vertical 20Control gear technologies: HF control gear provided with two-core cable (with silicone outer protective sheath and Teflon-coated innerwires) complete with a quick-fit plug to connect to the socket on the luminaire

Installation:With bezel: by overlapping the bezel on the cut-out in the false ceiling and using the innovative ClikFix retainer device tohold in place

Glow wire: =>850 - in compliance with standard IEC EN 60598-1:2008 Annex ZC (13.3)Standard finishes: 10 white 21 black 28 metallised grey


Unimosa RECESSED LUMINAIRESAdjustable recessed luminaire

49

ACCESSORIES

With bezel Control gear Watt()

EfficacyKG

0.17750.00 HF 1x20 0.61 2x 5 0.96+0.27

0.17751.00 HF 1x20 0.65 2x15 0.96+0.27

0.17752.00 HF 1x20 0.72 2x44 0.96+0.27

0.17753.00 HF 1x20 0.76 Wall Washer Mira 0.96+0.27

0.17755.00 HF 1x35 0.76 2x 6 0.96+0.36

0.17756.00 HF 1x35 0.76 2x11 0.96+0.36

0.17757.00 HF 1x35 0.69 2x37 0.96+0.36


0.17760.00 HF 1x70 0.76 2x 7 0.96+0.40

0.17761.00 HF 1x70 0.72 2x12 0.96+0.40

0.17762.00 HF 1x70 0.77 2x39 0.96+0.40


Kit: luminaire + IOS + control gear for metal halide lamps, 20 W/35 W/70 W

Accessories: 0.03305.00 / 0.03306.00 / 0.03307.00 / 0.03308.00 (IOS) Interchangeable optical system 0.11330.00 Hole cutter, 130 mm 0.10099.00 Hole cutter handle

Four beam widths:narrow, medium, wide

and Wall Washer Mira.80 mm IOS reflector madefrom 99.99% pure aluminium;twist-lock fixing system;tempered safety glass (clear,microsphere and prismatic forthe Wall Washer Mira version).

CDM-T

G 12

170

138

With bezel

130mmIP20

IP20

HF

160x90x40h mm

Hole cutter handle


Finish

0.10099.00 00

Hole cutter

Finish

0.11330.00 00 for 130 mm cut-outs

Kit

80mm


Filter finishes

G la ss f il te rs G la ss selec ti ve fi lte rs fo r l ig hting f oo ds tu ff s Colou re d d ichr oic g la ss fi lt er s


0.03305.00 2x 5/ 6/ 7 00 59 79 64 65 66 67 74 75 76 770.03306.00 2x15/11/ 12 00 59 79 64 65 66 67 74 75 76 770.03307.00 2x44/37/ 37 00 59 79 64 65 66 67 74 75 76 770.03308.00 Wall Washer Mira 00


19/16650

Bisio, fully adjustablerecessed spot, with themobile shield and the

capacity to turn from aninspot to a downspot ina moment, is the perfectchoice for all situations thatrequire extreme flexibility.Adjustability in the horizontalaxis is 358, while it variesfrom +90 (downspot) to -35(inspot) in the vertical axis,depending on the modelsand the light sources.Bisio can be used at low

heights, in niches and

showcases, up to and overstandard heights.With appropriate diameter

and power, it effectivelysatisfies the lighting designneeds of car showrooms,clothing and furniture stores,grocery shops, public places,exhibition areas, hotellobbies and all areas thatrequire a great deal of lightfor extended times.

BisioAdjustable recessed luminaire

RECESSED LUMINAIRES



20/16651

Burton Dorothy PerkinsLondon, Great Britain


RECESSED LUMINAIRES


21/16652

Body

Die-cast aluminium.

LED LUCE system

Consisting of metallisedpolycarbonate reflector (withlight collimator for symmetric

beams) and polycarbonate safetyshield (clear for very narrowbeams, satin for narrow,medium and wide beams andsatin/prismatic for the WallWasher Mira version).

IOS (Interchangeable OpticalSystem)Consisting of a 99.99% purealuminium reflector with twist-lock fixing system and temperedsafety glass (clear for narrowbeams, microsphere for mediumand wide beams, prismatic forthe Wall Washer Mira version).The special knurling on theouter edge makes the reflectoreasy to grip and to attach to theluminaire.


Bisio can change the width ofthe light beam (narrow, medium,wide) and its colouring (green,light blue, yellow, red) using theIOS interchangeable optics with

twist-lock fixing system; easy tosubstitute with a simple twist.The IOS optics can also bebought separately.

Adjustment

358 in the horizontal axis;from +90 (downspot) to-35 (inspot) in the vertical axisdepending on the luminairesand the light sources.



For LED LUCE:PWM driver

For metal halide lamps:HF or HPF control gear (digitalsuperimposed timed safetyignitor with burnt-out lamp

control), low loss power supply(with thermal circuit breakerand power factor correctioncapacitor).

Quick-fit plug

ClikFix

retainerdevice

IOSInterchangeableOptical System

Built-in anti-glareshield with variableadjustment from0 to 85


RECESSED LUMINAIRES

Standard finishes

10 white28 metallised grey

Sizes

Bisio comes in three cut-outsizes: 100 mm, 130 mmand 195 mm.

Adjustment ofthe luminaire inthe vertical axis:

-35 (inspot) +90(downspot)

Adjustment of theluminaire in thehorizontal axis: 358


22/16653


RECESSED LUMINAIRES








Trimless:By inserting the spotlight support in theplasterboard false ceiling (12.5 mm or 15 mmthick for 100 mm and 130 mm; 9 mm,12.5 mm or 15 mm thick for 195 mm)and smoothing plaster around the cut-out.

With bezel:By overlapping the bezel over the cut-out in thefalse ceiling and then fixing it with the innovativeClikFix retainer device (for luminaires with 130 mm and 195 mm).


23/166

Bisio RECESSED LUMINAIRESAdjustable recessed luminaire

Adjustable recessed luminaireBody: die-cast aluminium Adjustment: horizontal 358, vertical (adjustable from -15/35 to +30/90 depending on model)Shield: mobile anti-glare shield integrated into the luminaire bodyInstallation: Trimless: by inserting the spotlight support in the false ceiling (12.5-15 mm thick for luminaires with 100/130 cut-outand 9-12.5-15 mm thick for luminaires with 195 cut-out) and smoothing plaster around the cut-out.With bezel: by overlapping thebezel on the cut-out in the false ceiling and in luminaires with 130/195 mm cut-out, using the innovative ClikFix retainer device to holdthe bezel in place


Glow wire: = >850 - in compliance with standard IEC EN 60598-1:2008 Annex ZC (13.3)Standard finishes: 10 white 28 metallised grey


54


EfficacyKG

0.31055.00 0.30055.00 driver 1x16 0.78 2x11 0.75+0.21

0.31056.00 0.30056.00 driver 1x16 0.77 2x18 0.75+0.21

0.31057.00 0.30057.00 driver 1x16 0.80 2x25 0.75+0.21

Plug and Play: recessed luminaire with LED LUCE LL1 + driverAdjustment: horizontal 358, vertical from -35 to +75 Shield: vertically adjustable from 0 to 75Light source: LED LUCE (16 W, 800 lm, 3000 K, CRI 90), see pages 8-15Total power consumption: LED LUCE + driver = 18 W

Accessories: (see page 59) 0.35000.00 / 0.35001.00 / 0.35002.00 (IOS) Interchangeable optical system 0.35070.00 Emergency pack

0.35100.00 Extension lead 0.10099.00 Hole cutter handle 0.11100.00 Hole cutter, 100 mm.

100

155

117

155

Trimless With bezel

IP20

IP20

IP20

IP20

LL1 - Three beam widths:narrow, medium and wide.50 mm IOS reflector madefrom metallised polycarbonate(with light collimator for narrowand medium beams).Clear polycarbonate safetyshield.

100mm driver

130x60x35h mm


EfficacyKG

0.31075.00 0.30075.00 driver 1x16 0.89 2x 6 1.09+0.21

0.31074.00 0.30074.00 driver 1x16 0.85 2x 9 1.09+0.21

0.31076.00 0.30076.00 driver 1x16 0.85 2x12 1.09+0.21

0.31077.00 0.30077.00 driver 1x16 0.80 2x16 1.09+0.21

0.31078.00 0.30078.00 driver 1x16 0.79 2x27 1.09+0.21

0.31079.00 0.30079.00 driver 1x16 0.66 Wall Washer Mira 1.09+0.21

Plug and Play: recessed luminaire with LED LUCE LL2 + driverAdjustment: horizontal 358, vertical from -15 to +85 Shield: vertically adjustable from 0 to 85Light source: LED LUCE (16 W, 800 lm, 3000 K, CRI 90), see pages 8-15Total power consumption: LED LUCE + driver = 18 W

Accessories: (see page 59) 0.35049.00 / 0.35050.00 / 0.35051.00 / 0.35052.00 / 0.35053.00 / 0.35054.00 (IOS) Interchangeable optical system 0.35070.00 Emergency pack 0.35100.00 Extension lead 0.10099.00 Hole cutter handle 0.11330.00 Hole cutter, 130 mm.

130

140

138

140

Trimless With bezel

LL2 - Six beam widths:very narrow, narrow, medium, wideand Wall Washer Mira.80 mm IOS reflector made frommetallised polycarbonate (with

light collimator for symmetricbeams).Polycarbonate safety shield: clear,satin and satin/prismatic for theWall Washer Mira version.

130mm driver

130x60x35h mm

Kit

Kit


24/166


55

Luminaire for low voltage halogen lamps with built-in reflector, 20 W/35 W/50 WAdjustment: horizontal 358, vertical from -35 to +75Polyblok: patented system for mechanically fixing the lamps and for holding the clear safety glassShield: vertically adjustable from 0 to 75 Terminal board: IP30, complete with cable gland

Accessories: (see page 59) 0.06937.00 Dichroic filters 0.03863.00 Container for concrete ceilings (Only for code 0.11110.00) 0.11110.00 Hole cutter, 100 mm 0.10099.00 Hole cutter handle

130

100

130

118

Trimless With bezel

100mm

QR-CB

GU 5.3

IP20

IP23

Luminaire + IOS for halogen lamps, 50 W - 12V / 150 W - 24VAdjustment: horizontal 358, vertical from -15 to +85Shield: vertically adjustable from 0 to 85


140

130

140

138

Trimless With bezel

130mm

QT-12

GY 6.35

IP40

IP43 11329/11328



Trimless With bezel Transformer Watt()

EfficacyKG

0.11159.00 0.11158.00 not included

1x50 12V 0.80 2x 9

0.691x150 24V 0.87 2x 6

0.11169.00 0.11168.00 not included1x50 12V 0.81 2x12

0.691x150 24V 0.85 2x17

0.11179.00 0.11178.00 not included1x50 12V 0.81 2x15

0.691x150 24V 0.85 2x20

Four beam widths:narrow, medium, wideand Wall Washer Mira.80 mm IOS reflector madefrom 99.99% pure aluminium;twist-lock fixing system;

tempered safety glass (clear,microsphere and prismatic forthe Wall Washer Mira version).


25/166


56

Kit: luminaire + IOS + control gear for metal halide lamps, 20 W/35 W/70 WAdjustment: horizontal 358, vertical from -15 to +85Shield: vertically adjustable from 0 to 85

Accessories: (see page 59) 0.11300.00 / 0.11301.00 / 0.11302.00 / 0.11303.00 (IOS) Interchangeable optical system 0.11330.00 Hole cutter, 130 mm 0.10099.00 Hole cutter handle.

140

130

140

138

Trimless With bezel

130mmIP40

IP43 11321/11320



CDM-TC

G8.5


KG

0.11109.00 0.11108.00 HF 1x20 0.84 2x 7 0.61+ 0.27

0.11103.00 0.11102.00 HF 1x20 0.79 2x17 0.61+ 0.27

0.11105.00 0.11104.00 HF 1x20 0.77 2x28 0.61+ 0.27

0.11121.EV 0.11120.EV HPF 1x35 0.84 2x 7 0.61+ 1.32

0.11131.00 0.11130.00 HF 1x35 0.84 2x 7 0.61+ 0.36

0.11123.EV 0.11122.EV HPF 1x35 0.80 2x17 0.61+ 1.32

0.11133.00 0.11132.00 HF 1x35 0.80 2x17 0.61+ 0.36

0.11125.EV 0.11124.EV HPF 1x35 0.76 2x28 0.61+ 1.32

0.11135.00 0.11134..00 HF 1x35 0.76 2x28 0.61+ 0.36

0.11151.00 0.11150.00 HF 1x70 0.82 2x 8 0.61+ 0.40

0.11153.00 0.11152.00 HF 1x70 0.81 2x17 0.61+ 0.40

0.11155.00 0.11154.00 HF 1x70 0.84 2x29 0.61+ 0.40

HF

HPF

210x131x77h mm

160x90x40h mm

CDM-T

G 12

Kit: luminaire + IOS + control gear for metal halide lamps, 20 W/35 W/70 WAdjustment: horizontal 358, vertical from -15 to +30Shield: vertically adjustable from 0 to 30


IP20

IP23 11323/11322


EfficacyKG

0.11288.00 0.11294.00 HF 1x20 0.76 2x 6 0.73+0.27

0.11289.00 0.11295.00 HF 1x20 0.74 2x12 0.73+0.27

0.11290.00 0.11296.00 HF 1x20 0.71 2x37 0.73+0.27

0.11161.EV 0.11160.EV HPF 1x35 0.76 2x 6 0.73+1.32

0.11171.00 0.11170.00 HF 1x35 0.76 2x 6 0.73+0.36

0.11163.EV 0.11162.EV HPF 1x35 0.76 2x11 0.73+1.32

0.11173.00 0.11172.00 HF 1x35 0.76 2x11 0.73+0.36

0.11165.EV 0.11164.EV HPF 1x35 0.69 2x37 0.73+1.32

0.11175.00 0.11174.00 HF 1x35 0.69 2x37 0.73+0.36

0.11181

.EV 0.11180

.EV HPF 1x70 0.76 2x 7 0.73+1.72

0.11191.00 0.11190.00 HF 1x70 0.76 2x 7 0.73+0.40

0.11183.EV 0.11182.EV HPF 1x70 0.72 2x12 0.73+1.72

0.11193.00 0.11192.00 HF 1x70 0.72 2x12 0.73+0.40

0.11185.EV 0.11184.EV HPF 1x70 0.77 2x39 0.73+1.72

0.11195.00 0.11194.00 HF 1x70 0.77 2x39 0.73+0.40

Kit

Kit


26/166


57

Kit: luminaire + IOS + control gear for metal halide lamps, 20 W/35 W/70 W/150 WAdjustment: horizontal 358, vertical from -30 to +90Shield: vertically adjustable from 0 to 90




CDM-T

G 12

185

195

185

212

Trimless With bezel

195mmIP20

IP23 11335/11336

HF

HPF

210x131x77h mm

160x90x40h mm


KG

0.11350.00 0.11360.00 HF 1x20 0.89 2x 7 1.36+0.27

0.11351.00 0.11361.00 HF 1x20 0.84 2x11 1.36+0.27

0.11352.00 0.11362.00 HF 1x20 0.83 2x25 1.36+0.27

0.11201.EV 0.11200.EV HPF 1x35 0.90 2x 7 1.36+1.32

0.11211.00 0.11210.00 HF 1x35 0.90 2x 7 1.36+0.36

0.11203.EV 0.11202.EV HPF 1x35 0.85 2x11 1.36+1.32

0.11213.00 0.11212.00 HF 1x35 0.85 2x11 1.36+0.36

0.11205.EV 0.11204.EV HPF 1x35 0.84 2x25 1.36+1.32

0.11215.00 0.11214.00 HF 1x35 0.84 2x25 1.36+0.36

0.11221.EV 0.11220.EV HPF 1x70 0.81 2x 7 1.36+1.72

0.11231.00 0.11230.00 HF 1x70 0.81 2x 7 1.36+0.40

0.11223.EV 0.11222.EV HPF 1x70 0.80 2x11 1.36+1.72

0.11233.00 0.11232.00 HF 1x70 0.80 2x11 1.36+0.40

0.11225.EV 0.11224.EV HPF 1x70 0.81 2x25 1.36+1.72

0.11235.00 0.11234.00 HF 1x70 0.81 2x25 1.36+0.40

0.11241.EV 0.11240.EV HPF 1x150 0.77 2x 7 1.36+2.62

0.11251.00 0.11250.00 HF 1x150 0.77 2x 7 1.36+0.64

0.11243.EV 0.11242.EV HPF 1x150 0.79 2x11 1.36+2.62

0.11253.00 0.11252.00 HF 1x150 0.79 2x11 1.36+0.64

0.11245.EV 0.11244.EV HPF 1x150 0.79 2x24 1.36+2.62

0.11255.00 0.11254.00 HF 1x150 0.79 2x24 1.36+0.64

Kit


27/166


58

Luminaire for low voltage halogen lamps, 100 W - 12VAdjustment: horizontal 358, vertical from -30 to +45Shield: vertically adjustable from 0 to 45

Accessories: (see page 59) 0.11345.00 Hole cutter, 195 mm 0.10099.00 Hole cutter handle

210

195

210

212

Trimless With bezel

195mmIP20

IP20

QR-111

G 53


0.11209.00 0.11208.00 not included 1x100 of the lamp 1.36


For technical detailsvisit our website:www.reggiani.net/code 130mm

SDW-TG 50WHF

0.11117.002x 7

0.11127.002x13

0.11137.002x26

0.11116.002x 7

0.11126.002x13

0.11136.002x26

HI-SPOT 50W 0.11129.00 0.11128.00

BRITESPOT 35W 0.11149.00 0.11148.00

195mm

SDW-TG 50WHF

0.11261002x 5

0.11263.002x 9

0.11265.002x13

0.11260002x 5

0.11262.002x 9

0.11264.002x13

SDW-TG 100WHF

0.11271.002x 8

0.11273.002x11

0.11275.002x15

0.11270.002x 8

0.11272.002x11

0.11274.002x15

HEG PAR 30 75W 0.11229.00 0.11228.00

HIR PAR 30L

35WHF 0.11267.00 0.11266.00

35WHPF

0.11257.EV 0.11256.EV

HIR PAR 30L

70WHF

0.11287.00 0.11286.00

70WHPF

0.11277.EV 0.11276.EV


28/16659

Bisio ACCESSORIESAdjustable recessed luminaire


Finish

0.35100.00 00


Finish

0.35070.00 00

Dichroic filters

Finishes

0.06937.00 74 blue0.06937.00 75 green0.06937.00 76 yellow0.06937.00 77 red

Hole cutter handle


Finish

0.10099.00 00

Hole cutter

Finish

0.11100.00 00 for 100 mm cut-outs0.11330.00 00 for 130 mm cut-outs0.11345.00 00 for 195 mm cut-outs

151

263

Container for concrete ceilings

Finish

0.03863.00 00


130mm

80mm

80mm

Shield finish

Clear

0.35000.00 2x11 000.35001.00 2x18 000.35002.00 2x25 00

50mm Shield finish

0.35050.00 2x 6 00 Clear0.35049.00 2x 9 00 Satin0.35051.00 2x12 00 Satin0.35052.00 2x16 00 Satin0.35053.00 2x27 00 Satin0.35054.00 Wall Washer Mira 00 Satin/prismatic

80mm

Filter finishes

G la ss f il te rs G la ss selec ti ve fi lte rs fo r l ig hting f oo ds tu ff s Co lo ure d d ichr oic g la ss fi lt er s



Filter finishes



0.11305.00 2x 6 / 2x 7 00 59 79 64 65 66 67 74 75 76 770.11306.00 2x11 / 2x12 00 59 79 64 65 66 67 74 75 76 770.11307.00 2x37 / 2x39 00 59 79 64 65 66 67 74 75 76 770.11308.00 Wall Washer Mira 00

Filter finishes



0.11310.00 2x 7 00 59 79 64 65 66 67 74 75 76 770.11311.00 2x11 00 59 79 64 65 66 67 74 75 76 77

0.11312.00 2x25 / 2x24 00 59 79 64 65 66 67 74 75 76 770.11313.00 Wall Washer Mira 00


29/16660

Sombra is the recessedluminaire that disappearscompletely into the false

ceiling. Perfect for enhancingthe settings it is used in,Sombra comes in a numberof adjustable and fixedversions. Two sphericalrotating sections enablethe light to rotate by 45 and356 degrees respectively onthe axes, keeping the lightsource hidden from view atpractically any angle.For total integration with the

surroundings, Sombra can bepainted the same colour as thefalse ceiling it is recessed into.


Sombra is available indifferent diameters with bezelor trimless and excels in both

diffused and directed lightingof intimate settings as wellas large spaces and itsexcellent adjustability meansit can light flat and verticalsurfaces.The discreet design, therefined technology and thesimple installation makeSombra a great resourcefor architects and interiordesigners.

SombraAdjustable recessed luminaire

RECESSED LUMINAIRES


30/16661

GeoxNew York, United States


RECESSED LUMINAIRES


31/16662

Adjustment from 0 to 45 with reference notches every 5.

Body

Die-cast aluminium.

LED LUCE system

Consisting of metallisedpolycarbonate reflector (withlight collimator for symmetric

beams) and polycarbonatesafety shield (clear for verynarrow beams, satin for narrow,medium and wide beams andsatin/prismatic for the WallWasher Mira version).

IOS (Interchangeable OpticalSystem)Consisting of a 99.99% purealuminium reflector withtwist-lock fixing system andtempered safety glass (clearfor narrow beams, microspherefor medium and wide beams,prismatic for the Wall WasherMira version). The specialknurling on the outer edgemakes the reflector easy to gripand to attach to the luminaire.


Sombra can change the widthof the light beam (narrow,medium, wide) and its colouring(green, light blue, yellow, red)using the IOS interchangeable

optics with twist-lock fixingsystem; easy to substitute witha simple twist. The IOS opticscan also be bought separately.

Adjustment

With Sombra it is possible toadjust the lamp by rotating twosolid spherical sections: rotatethe small section to tilt thelamp up to 45; rotate the largesection to tilt it up to 356 in thevertical section. A special grubscrew keeps it in the adjustmentposition; the small referencenotches can be used to selectthe position.



For LED LUCE:

PWM driver


RECESSED LUMINAIRES


Quick-fitplug

Rotation ofsmallsection: 45

Rotationof largesection:356

IOSInterchangeable

Optical System

Standard finishes

10 white28 metallised grey(for versions with bezel)

Sizes

The luminaires come withthree cut-out sizes: 151 mm, 195 mm and 235 mm.


32/16663



RECESSED LUMINAIRES







Trimless:By inserting the spotlight support in theplasterboard false ceiling (9 - 12.5 - 15 mm thick)and smoothing plaster around the cut-out.

With bezel:By overlapping the bezel over the cut-out in thefalse ceiling and then fixing it with the innovativeClikFix retainer device.


33/166

Adjustable recessed inspotBody: die-cast aluminiumAdjustment : two solid spherical sections: rotate the smaller section to tilt the lamp up to 45; rotate the larger section to adjust it up to 356Installation: Trimless: by inserting the spotlight support in the false ceiling (9-12.5-15 mm thick) and smoothing plaster around thecut-out.With bezel: by overlapping the bezel on the cut-out in the false ceiling and using the innovative ClikFix retainer device to holdthe bezel in placeControl gear technologies: constant current driver for LED LUCE l ight sources and HF or HPF control gear for metal halide lamps,

provided with multi-core cable (with silicone outer protective sheath and Teflon-coated inner wires) complete with a quick-fit plug toconnect to the socket on the luminaireGlow wire: = >850 - in compliance with standard IEC EN 60598-1:2008 Annex ZC (13.3)Standard finishes: 10 white 28 metallised grey (only for luminaires with bezel, the trimless luminaires are always white)


IP20

IP40

Sombra RECESSED LUMINAIRESAdjustable recessed luminaire

64


Efficacy

0.32701.00 0.32700.00 driver 1x16 0.89 2x 6

0.32711.00 0.32710.00 driver 1x16 0.85 2x 9

0.32703.00 0.32702.00 driver 1x16 0.85 2x12

0.32705.00 0.32704.00 driver 1x16 0.80 2x16

0.32707.00 0.32706.00 driver 1x16 0.79 2x27

0.32709.00 0.32708.00 driver 1x16 0.66 Wall Washer Mira

Plug and Play: recessed luminaire with LED LUCE LL2 + driverLight source: LED LUCE (16 W, 800 lm, 3000 K, CRI 90), see pages 8-15Total power consumption: LED LUCE + driver = 18 W

Accessories: (see page 69) 0.35049.00 / 0.35050.00 / 0.35051.00 / 0.35052.00 / 0.35053.00 / 0.35054.00 (IOS) Interchangeable optical system 0.35070.00 Emergency pack 0.35100.00 Extension lead 0.10099.00 Hole cutter handle 0.11345.00 Hole cutter, 195 mm

215

195

215

212

Trimless With bezel

LL2 - Six beam widths:very narrow, narrow, medium, wideand Wall Washer Mira.80 mm IOS reflector made frommetallised polycarbonate (withlight collimator for symmetricbeams).Polycarbonate safety shield: clear,satin and satin/prismatic for theWall Washer Mira version.

195mm driver

130x60x35h mm

Kit


34/166

155

151

Luminaire for low voltage halogen lamps with built-in reflector, 20W/35W/70WPolyblok: patented system for mechanically fixing the lamps and for holding the clear safety glassTerminal board: IP30, complete with cable gland

Accessories: (see page 69) 0.06937.00 Dichroic filters 0.10151.00 Hole cutter, 151 mm 0.10099.00 Hole cutter handle

Trimless With bezel

151mm 155mm

QR-CB

GU 5,3

IP20

IP20

IP20

IP20



Trimless With bezel Control gear Watt KG

0.10117.00 0.10118.00 Mains voltage 1x50 of the lamp 0.46


65

155

171

151 155

155

151

Luminaire for mains voltage halogen lamps with built-in reflector, 50WTerminal board: IP30, complete with cable gland

Accessories: (see page 69) 0.10151.00 Hole cutter, 151mm 0.10099.00 Hole cutter handle

Trimless With bezel

151mm 155mm

HI-SPOT

GZ 10

155

171

151 155


35/166


36/166


67

Trimless With bezel Transformer Watt ()Efficacy

0.10655.00 0.10654.00 not included 1x75 12V 0.80 2x 9

0.10657.00 0.10656.00 not included 1x75 12V 0.81 2x12

0.10659.00 0.10658.00 not included 1x75 12V 0.81 2x15

0.10661.00 0.10660.00 not included 1x75 12V Wall Washer Mira

Luminaire + IOS for low voltage halogen lamps, 75W - 12V




QT-12

GY 6.35

215

195

215

212

Trimless With bezel

195mmIP20

IP40

Luminaire for low voltage halogen lamps with built-in reflector, 100W - 12VTerminal board: IP30 terminal board complete with cable gland


200

235

200

255

Trimless With bezel

235mmIP20

IP20

QR-111

G 53

Trimless With bezel Transformer Watt

0.10303.00 0.10302.00 not included 1x100 12V of the lamp


37/166


68

Kit: luminaire + IOS + control gear for metal halide lamps, 20W/35W/70W/150W

Accessories: (see page 69) 0.11310.00 / 0.11311.GS / 0.11312.GS / 0.11313.00 (IOS) Interchangeable optical system 0.10235.00 Hole cutter, 235 mm 0.10099.00 Hole cutter handle



CDM-T

G 12

235

235 235

255

Trimless With bezel

235mmIP20

IP43 10200/10201

HF

HPF

210x131x77h mm

160x90x40h mm


KG

0.10541.00 0.10540.00 HF 1x20 0.89 2x 7 1.36+0.27

0.10543.00 0.10542.00 HF 1x20 0.84 2x11 1.36+0.27

0.10545.00 0.10544.00 HF 1x20 0.83 2x25 1.36+0.27

0.10251.EV 0.10250.EV HPF 1x35 0.90 2x 7 1.36+1.32

0.10257.00 0.10256.00 HF 1x35 0.90 2x 7 1.36+0.36

0.10253.EV 0.10252.EV HPF 1x35 0.85 2x11 1.36+1.32

0.10259.00 0.10258.00 HF 1x35 0.85 2x11 1.36+0.36

0.10255.EV 0.10254.EV HPF 1x35 0.84 2x25 1.36+1.32

0.10261.00 0.10260.00 HF 1x35 0.84 2x25 1.36+0.36

0.10263.EV 0.10262.EV HPF 1x70 0.81 2x 7 1.36+1.72

0.10269.00 0.10268.00 HF 1x70 0.81 2x 7 1.36+0.40

0.10265.EV 0.10264.EV HPF 1x70 0.80 2x11 1.36+1.720.10271.00 0.10270.00 HF 1x70 0.80 2x11 1.36+0.40

0.10267.EV 0.10266.EV HPF 1x70 0.81 2x25 1.36+1.72

0.10273.00 0.10272.00 HF 1x70 0.81 2x25 1.36+0.40

0.10275.EV 0.10274.EV HPF 1x150 0.77 2x 7 1.36+2.62

0.10281.00 0.10280.00 HF 1x150 0.77 2x 7 1.36+0.64

0.10277.EV 0.10276.EV HPF 1x150 0.79 2x11 1.36+2.62

0.10283.00 0.10282.00 HF 1x150 0.79 2x11 1.36+0.64

0.10279.EV 0.10278.EV HPF 1x150 0.79 2x24 1.36+2.62

0.10285.00 0.10284.00 HF 1x150 0.79 2x24 1.36+0.64


For technical detailsvisit our website:www.reggiani.net/code

235mm

PAR 30S 75WHF

0.10333.00 0.10332.00

CDM-R 111

35WHF

0.10397.00 0.10396.00

35WHPF

0.10395.EV 0.10394.EV

CDM-R 111 70WHF

0.10399.00 0.10398.00

PAR 30L

35WHF

0.10345.00 0.10344.00

35WHPF

0.10325.EV 0.10324.EV

PAR 30

70WHF

0.10385.00 0.10384.00

70WHPF 0.10365.EV 0.10364.EV

QT-14 75W 0.10351.002x 8

0.10353.002x11

0.10355.002x25

0.10350.002x 8

0.10352.002x11

0.10354.002x25

SDW-TG 50WHF

0.10237.002x 5

0.10239.002x 9

0.10241.002x13

0.10236.002x 5

0.10238.002x 9

0.10240.002x13

SDW-TG 100WHF

0.10243.002x 8

0.10245.002x11

0.10247.002x15

0.10242.002x 8

0.10244.002x11

0.10246.002x15

Kit


38/166

Sombra ACCESSORIESAdjustable recessed luminaire

69

Dichroic filters

Finishes

0.06937.00 74 blue0.06937.00 75 green0.06937.00 76 yellow0.06937.00 77 red

Hole cutter handle


Finish

0.10099.00 00

Hole cutter

Finish

0.10151.00 00 for 151 mm cut-outs0.11345.00 00 for 195mm cut-outs0.10235.00 00 for 235 mm cut-outs

80mm


130mm

Shield finish


80mm

The abbreviation GS identifies the special finish of the safety glass with "clear microsphere centre and matt smooth edge", standard feature for the Sombra luminaires andavailable in finish 00 only.The standard IOS version (microsphere on the whole safety glass) must be requested for all other finishes.


Finish

0.35100.00 00


Finish

0.35070.00 00

Filter finishes



0.11300.00 2x 7 / 2x 8 00 59 79 64 65 66 67 74 75 76 770.11301.GS 2x17 000.11302.GS 2x28 / 2x29 000.11301.00 2x17 59 79 64 65 66 67 74 75 76 77

0.11302.00 2x28 / 2x29 59 79 64 65 66 67 74 75 76 770.11303.00 Wall Washer Mira 00

Filter finishes



0.11310.00 2x 7 00 59 79 64 65 66 67 74 75 76 770.11311.GS 2x11 000.11312.GS 2x25 / 2x24 000.11311.00 2x11 59 79 64 65 66 67 74 75 76 770.11312.00 2x25 / 2x24 59 79 64 65 66 67 74 75 76 770.11313.00 Wall Washer Mira 00


39/166

Fixed recessed luminaireBody: die-cast aluminiumControl gear technologies: HF EEI=A1/A2; HF/emergency for permanent illumination - Ni/Cd battery with 1h back-up (emergency powersupply for 1 lamp) and recharging in 24h; dimmable HF control gear (1-10V d.c.); HF control gear suitable for DALI, switch-dim, DSI digitaldimming, Versions with HF control gear with provision for digital or 1-10V d.c. dimming available upon request (see page 71)Installation: Trimless: by inserting the spotlight support in the false ceiling (9-12.5-15 mm thick) and smoothing plaster around thecut-out.With bezel: by overlapping the bezel on the cut-out in the false ceiling and using the innovative ClikFix retainer device to hold

the bezel in placeGlow wire: =>850 - in compliance with standard IEC EN 60598-1:2008 Annex ZC (13.3)Standard finishes: 10 white 28 metallised grey (only for luminaires with bezel, the trimless luminaires are always white)


Luminaire for low voltage halogen lamps with built-in reflector, 20W/35W/50WShield: clear safety glassAnti-glare shield: die-cast aluminium

Accessories: (see page 69) 0.06937.00 Dichroic filters 0.10151.00 Hole cutter, 151 mm 0.10099.00 Hole cutter handle

Trimless With bezel

151mm 155mm

QR-CB

GU 5.3

IP20

IP20



Luminaire for low voltage halogen lamps with built-in reflector, 100W - 12VAnti-glare shield: die-cast aluminium


Trimless With bezel

151mm 155mm

IP20

IP20

QR-111

G 53


0.10109.00 0.10108.00 not included 1x100 12V of the lamp 0.52

150

151 151

151

150

171

155

170

151 151

151

170

171

155

Sombra RECESSED LUMINAIRESFixed recessed luminaire

70


40/16671

Sombra RECESSED LUMINAIRESComfort recessed luminaires

Kit: luminaire + control gear for compact fluorescent lamps, 2x18W/2x26WReflector: 99.9% pure aluminium, high specularityShield: prismatic safety glass


200

235

200

255

Trimless With bezel

235mm

TC-DE

( )

(TC-TE)

G 24q2

IP20

IP43

IP20

IP43


KG

0.10703.00 0.10702.00 HF 2x18 0.53 2x50 1.40

0.10709.00 0.10708.00 HF Emergency 2x18 0.53 2x50 1.40+1.00

0.10713.00 0.10712.00 HF 2x26 0.50 2x50 1.40

0.10719.00 0.10718.00 HF Emergency 2x26 0.50 2x50 1.43+1.00

Trimless With bezel Control gear Watt ()Efficacy KG

0.10733.00 0.10732.00 HF 2x32 0.49 2x50 1.50

0.10739.00 0.10738.00 HF Emergency 2x32 0.49 2x50 1.40+1.20

Kit: luminaire + control gear for compact fluorescent lamps, 2x32WReflector: 99.9% pure aluminium, high specularityShield: prismatic safety glass

Accessories: (see page 69) 0.10235.00 Hole cutter, 235 mm 0.10099.00 Hole cutter handleTC-TE

GX 24q3

IP20

IP20


EfficacyKG

0.10753.00 0.10752.00 HF 2x42 0.49 2x50 1.50

0.10759.00 0.10758.00 HF Emergency 2x42 0.49 2x50 1.40+1.40

Kit: luminaire + control gear for compact fluorescent lamps, 2x42WReflector: 99.9% pure aluminium, high specularity


TC-TE

GX 24q4

HFEmergency

+

150x250x75h mm

HF

HF

90x160x40h mm

170x40x20h mm

Special version Lamp WattTrimless

HF HPF HF DIM. 1-10V HF DIM. DIG.

With bezelHF HPF HF DIM. 1-10V HF DIM. DIG.

For technical detailsvisit our website:www.reggiani.net/code 151mm

HI-SPOT 50W 0.10113.00 0.10112.00

CDM-R 111 35W 0.10107.00 0.10105.EV 0.10106.00 0.10104.EV

HEG/PAR 30 100W 0.10133.00 0.10132.00

PAR 30L 35W 0.10145.00 0.10125.EV 0.10144.00 0.10124.EV

PAR 30L 70W 0.10185.00 0.10165.EV 0.10184.00 0.10164.EV

235mm

TC-DE

(TC-TE)

2x18 0.10705.002x50

0.10707.002x50

0.10704.002x50

0.10706.002x50

2x26 0.10715.002x50

0.10717.002x50

0.10714.002x50

0.10716.002x50

TC-TE2x32 0.10735.00

2x500.10737.00

2x500.10734.00

2x500.10736.00

2x50

2x420.10755.00

2x500.10757.00

2x500.10754.00

2x500.10756.00

2x50

HIT-DE 70W 0.10505.002x30

0.10503.EV2x30

0.10504.002x30

0.10502.EV2x30

HIT-DE 150W 0.10515.002x30

0.10513.EV2x30

0.10514.002x30

0.10512.EV2x30

HIT-DE 250W 0.10533.EV2x30

0.10532.EV2x30


41/16672

Square or round, Sombradois a completely trimlessrecessed luminaire

with an extraordinarilypure style, perfect foradjustable or fixed lighting.Notwithstanding its greatdiscretion, Sombrado allowseffective quality lighting.The adjustable fittings meanit can be adjusted to 356 inthe horizontal axis and upto 45 in the vertical axis.Sombrado is unsurpassedin day lighting of large

areas with standard heightceilings.


SombradoAdjustable recessed luminaire

RECESSED LUMINAIRES

Completely trimless luminaire,once it has been installed, thestructure disappears, leavingthe pure safety glass to set off thefalse ceiling.


42/16673

Lecab Cars ShowroomSweden


RECESSED LUMINAIRES


43/16674


RECESSED LUMINAIRES

Body

Die-cast aluminium spotlightsupport, painted steel backhousing.Glass retaining springs incoated steel (the degree ofprotection of the exposed part

is reduced to IP23 if the glassretaining springs are removed)and clear safety glass with mattedge (heat treated).

LED LUCE system

Consisting of metallisedpolycarbonate reflector (withlight collimator for symmetricbeams) and polycarbonatesafety shield (clear for verynarrow beams, satin for narrow,medium and wide beams andsatin/prismatic for the WallWasher Mira version).

IOS (Interchangeable OpticalSystem)Consisting of a 99.99% purealuminium reflector withtwist-lock fixing system andtempered safety glass (clearfor narrow beams, microspherefor medium and wide beams,prismatic for the Wall WasherMira version). The specialknurling on the outer edge

makes the reflector easy to gripand to attach to the luminaire.


Sombrado can change thewidth of the light beam (verynarrow, narrow, medium, wide)and its colouring (green, lightblue, yellow, red) using the IOSinterchangeable optics withtwist-lock fixing system; easy toreplace with a simple twist. TheIOS optics can also be boughtseparately.



For LED LUCE:constant current driver.


Standard finish

12 embossed white

Fixed or adjustable IOSoptics, dependingon the model

Quick-fit

plug


44/16675



RECESSED LUMINAIRES






Trimless:By inserting the spotlight support in the plasterboard false ceiling(12.5-15 mm thick) and smoothing plaster around the cut-out.


45/166

Sombrado RECESSED LUMINAIRESFixed / adjustable recessed luminaire

Square recessed luminaireBody: die-cast aluminium spotlight support, painted steel back housing. Glass retaining springs in coated steel (the degree of protectionof the exposed part is reduced to IP23 if the glass retaining springs are removed)

Shield: clear safety glass with matt edge (heat treated)Adjustment: versions with fixed and orientable optics (see specifications for each article)Installation: Trimless: by inserting the spotlight support in the plasterboard false ceiling (12.5-15 mm thick) and smoothing plasteraround the cut-out. After the luminaire has been installed, the safety glass will be the only visible part flush with the ceiling


Glow wire: = >850 - in compliance with standard IEC EN 60598-1:2008 Annex ZC (13.3)Standard finish: 12 embossed white


76


Trimless Control gear Watt ()Efficacy KG

0.31101.00 driver 1x16 0.89 2x 6 1.35+0.21

0.31106.00 driver 1x16 0.85 2x 9 1.35+0.21

0.31102.00 driver 1x16 0.85 2x12 1.35+0.210.31103.00 driver 1x16 0.80 2x16 1.35+0.210.31104.00 driver 1x16 0.79 2x27 1.35+0.210.31105.00 driver 1x16 0.66 Wall Washer Mira 1.35+0.21

170

107

driver

130x60x35h mm

Trimless Control gear Watt()

EfficacyKG

0.31120.00 driver 1x16 0.89 2x 6 2.14+0.21

0.31119.00 driver 1x16 0.85 2x 9 2.14+0.21


230

157

IP20

IP43

LL2 - Six beam widths:very narrow, narrow, medium, wide

and Wall Washer Mira.80 mm IOS reflector made frommetallised polycarbonate (withlight collimator for symmetricbeams).Polycarbonate safety shield: clear,satin and satin/prismatic for theWall Washer Mira version.

driver

130x60x35h mm

159x159mm

Kit

Kit

Plug and Play: recessed luminaire with adjustable optics, including LED LUCE LL2 + driverOptics adjustment: horizontal 358, vertical 35Light source: LED LUCE (16 W, 800 lm, 3000 K, CRI 90), see pages 8-15Total power consumption: LED LUCE + driver = 18 W

Accessories: (see page 81) 0.35049.00 / 0.35050.00 / 0.35051.00 / 0.35052.00 / 0.35053.00 / 0.35054.00 (IOS) Interchangeable optical system 0.35070.00 Emergency pack 0.35100.00 Extension lead 0.13699.00 Glass shield

Plug and Play: fixed recessed luminaire with LED LUCE LL2 + driverLight source: LED LUCE (16 W, 800 lm, 3000 K, CRI 90), see pages 8-15Total power consumption: LED LUCE + driver = 18 W

Accessories: (see page 81) 0.35049.00 / 0.35050.00 / 0.35051.00 / 0.35052.00 / 0.35053.00 / 0.35054.00 (IOS) Interchangeable optical system 0.35070.00 Emergency pack 0.35100.00 Extension lead 0.13695.00 Glass shield

IP20

IP43109x109mm


46/166


77

88x88mm

Fixed luminaire for low voltage halogen lamps with built-in reflector, 20W/35W/50WTerminal board: IP30, complete with cable gland

Accessories: (see page 81) 0.13697.00 Glass shield

140

85

QR-CB

GU 5.3

Trimless Transformer Watt KG

0.13600.00 not included 1x20/35/50 of the lamp 0.56

IP20

IP43

109x109mm

Luminaire with adjustable optics for low voltage halogen lamps with built-in reflector, 20W/35W/50WTerminal board: IP30, complete with cable glandOptics adjustment: horizontal 358, vertical 20


170

107

QR-CB

GU 5,3


0.13620.00 Not included 1x20/35/50 of the lamp 1.11

IP20

IP43


47/166


78

Kit: fixed luminaire + IOS + control gear for metal halide lamps, 20W/35W/70W

Accessories: (see page 81) 0.11300.00 / 0.11301.00 / 0.11302.00 / 0.11303.00 (IOS) Interchangeable optical system 0.13695.00 Glass shield

170

107IP20

IP43



CDM-TC

G 8.5

Trimless Control gear Watt ()Efficacy

KG

0.13602.00 HF 1x20 0.84 2x 7 1.00+0.27

0.13603.00 HF 1x20 0.79 2x17 1.00+0.27

0.13604.00 HF 1x20 0.77 2x28 1.00+0.27

0.13605.00 HF 1x35 0.84 2x 7 1.00+0.27

0.13606.00 HF 1x35 0.80 2x17 1.00+0.27

0.13607.00 HF 1x35 0.76 2x28 1.00+0.27

0.13608.00 HF 1x70 0.82 2x 8 1.00+0.27

0.13609.00 HF 1x70 0.81 2x17 1.00+0.27

0.13610.00 HF 1x70 0.84 2x29 1.00+0.27

109x109mm HF

160x90x40h mm

Kit

Kit: luminaire with adjustable optics + IOS + control gear for metal halide lamps, 35W/70WOptics adjustment: horizontal 358, vertical 45


230

157

IP20

IP43

Four beam widths:narrow, medium, wideand Wall Washer Mira.80 mm IOS reflector madefrom 99.99% pure aluminium;twist-lock fixing system;tempered safety glass (clear,microsphere and prismatic forthe Wall Washer Mira version).

CDM-TC

G 8.5


EfficacyKG

0.13647.00 HF 1x35 0.84 2x 7 1.82+0.36

0.13648.00 HF 1x35 0.80 2x17 1.82+0.36

0.13649.00 HF 1x35 0.76 2x28 1.82+0.36

0.13650.00 HF 1x70 0.82 2x 8 1.82+0.36

0.13651.00 HF 1x70 0.81 2x17 1.82+0.36

0.13652.00 HF 1x70 0.84 2x29 1.82+0.36

159x159mm

Kit

HF

HPF

210x131x77h mm

160x90x40h mm


48/166

Sombrado RECESSED LUMINAIRESSquare recessed luminaire

79



Kit: luminaire with adjustable optics + IOS + control gear for metal halide lamps, 20W/35W/70WOptics adjustment: horizontal 358, vertical 35


IP20

IP43

CDM-T

G 12


KG

0.13788.00 HF 1x20 0.76 2x 6 2.45+0.27

0.13789.00 HF 1x20 0.74 2x12 2.45+0.27

0.13790.00 HF 1x20 0.71 2x37 2.45+0.27

0.13659.EV HPF 1x35 0.76 2x 6 2.45+1.32

0.13656.00 HF 1x35 0.76 2x 6 2.45+0.36

0.13660.EV HPF 1x35 0.76 2x11 2.45+1.32

0.13657.00 HF 1x35 0.76 2x11 2.45+0.36

0.13661.EV HPF 1x35 0.69 2x37 2.45+1.32

0.13658.00 HF 1x35 0.69 2x37 2.45+0.36

0.13665.EV HPF 1x70 0.76 2x 7 2.45+1.72

0.13662.00 HF 1x70 0.76 2x 7 2.45+0.40

0.13666.EV HPF 1x70 0.72 2x12 2.45+1.72

0.13663.00 HF 1x70 0.72 2x12 2.45+0.40

0.13667.EV HPF 1x70 0.77 2x39 2.45+1.72

0.13664.00 HF 1x70 0.77 2x39 2.45+0.40

Kit

230

157159x159mm

HF

HPF

210x131x77h mm

160x90x40h mm


49/166


80

Kit: luminaire with adjustable optics + IOS + control gear for metal halide lamps, 20W/35W/70W/150WOptics adjustment: horizontal 358, vertical 20



KG

0.13796.00 HF 1x20 0.89 2x 7 2.49+0.27

0.13797.00 HF 1x20 0.84 2x11 2.49+0.27

0.13798.00 HF 1x20 0.83 2x25 2.49+0.27

0.13671.EV HPF 1x35 0.90 2x 7 2.49+1.32

0.13668.00 HF 1x35 0.90 2x 7 2.49+0.36

0.13672.EV HPF 1x35 0.85 2x11 2.49+1.32

0.13669.00 HF 1x35 0.85 2x11 2.49+0.36

0.13673.EV HPF 1x35 0.84 2x25 2.49+1.32

0.13670.00 HF 1x35 0.84 2x25 2.49+0.36

0.13677.EV HPF 1x70 0.81 2x 7 2.49+1.72

0.13674.00 HF 1x70 0.81 2x 7 2.49+0.40

0.13678.EV HPF 1x70 0.80 2x11 2.49+1.72

0.13675.00 HF 1x70 0.80 2x11 2.49+0.40

0.13679.EV HPF 1x70 0.81 2x25 2.49+1.72

0.13676.00 HF 1x70 0.81 2x25 2.49+0.40

0.13683.EV HPF 1x150 0.77 2x 7 2.49+2.62

0.13680.00 HF 1x150 0.77 2x 7 2.49+0.64

0.13684.EV HPF 1x150 0.79 2x11 2.49+2.62

0.13681.00 HF 1x150 0.79 2x11 2.49+0.64

0.13685.EV HPF 1x150 0.79 2x24 2.49+2.62

0.13682.00 HF 1x150 0.79 2x24 2.49+0.64

230

157

IP20

IP43



159x159mm

HF

HPF

210x131x77h mm

160x90x40h mm

CDM-T

G 12

Luminaire with adjustable optics for low voltage lamps with built-in reflector, 75WOptics adjustment: horizontal 358, vertical 20

Terminal board: IP30, complete with cable gland


230

157

IP20

IP43

QR-111

G 53


0.13686.00 not included 1x75 of the lamp 1.65

159x159mm

Kit


50/16681

Sombrado ACCESSORIESFixed / adjustable recessed luminaire


Finish

0.35100.00 00

ShieldMatt safety glass with clear round centre

Finish

0.13695.00 000.13697.00 000.13698.00 000.13699.00 00


Finish

0.35070.00 00

130mm

80mm

80mm


Shield finish


80mm

Filter finishes




Filter finishes



0.11305.00 2x 6 / 2x 7 00 59 79 64 65 66 67 74 75 76 770.11306.00 2x11 / 2x12 00 59 79 64 65 66 67 74 75 76 770.11307.00 2x37 / 2x39 00 59 79 64 65 66 67 74 75 76 770.11308.00 Wall Washer Mira 00

Filter finishes



0.11310.00 2x 7 00 59 79 64 65 66 67 74 75 76 770.11311.00 2x11 00 59 79 64 65 66 67 74 75 76 77

0.11312.00 2x25 / 2x24 00 59 79 64 65 66 67 74 75 76 770.11313.00 Wall Washer Mira 00


51/166


Round recessed luminaireBody: die-cast aluminium spotlight support, painted steel back housing. Glass retaining springs in coated steel (the degree of protectionof the exposed part is reduced to IP23 if the glass retaining springs are removed)

Shield: clear safety glass with matt edge (heat treated)Adjustment: versions with fixed and orientable optics (see specifications for each article)Installation: Trimless: by inserting the spotlight support in the plasterboard false ceiling (12.5-15 mm thick) and smoothing plasteraround the cut-out. After the luminaire has been installed, the safety glass will be the only visible part flush with the ceiling


Glow wire: = >850 - in compliance with standard IEC EN 60598-1:2008 Annex ZC (13.3)Standard finish: 12 embossed white


82

Plug and Play: fixed recessed luminaire with LED LUCE LL2 + driverLight source: LED LUCE (16 W, 800 lm, 3000 K, CRI 90), see pages 8-15Total power consumption: LED LUCE + driver = 18 W

Accessories: (see page 87) 0.35049.00 / 0.35050.00 / 0.35051.00 / 0.35052.00 / 0.35053.00 / 0.35054.00 (IOS) Interchangeable optical system 0.35070.00 Emergency pack 0.35100.00 Extension lead 0.10151.00 Hole cutter, 151 mm 0.10099.00 Hole cutter handle


Trimless Control gear Watt ()Efficacy KG

0.31140.00 driver 1x16 0.89 2x 6 1.69+0.21

0.31139.00 driver 1x16 0.85 2x 9 1.69+0.21


170

148

IP20

IP43

driver

130x60x35h mm

151mm

Kit


EfficacyKG

0.31160.00 driver 1x16 0.89 2x 6 2.27+0.21

0.31159.00 driver 1x16 0.85 2x 9 2.27+0.21


Plug and Play: recessed luminaire with adjustable optics, including LED LUCE LL2 + driverOptics adjustment: horizontal 358, vertical 35Light source: LED LUCE (16 W, 800 lm, 3000 K, CRI 90), see pages 8-15Total power consumption: LED LUCE + driver = 18 W

Accessories: (see page 87) 0.35049.00 / 0.35050.00 / 0.35051.00 / 0.35052.00 / 0.35053.00 / 0.35054.00 (IOS) Interchangeable optical system 0.35070.00 Emergency pack 0.35100.00 Extension lead 0.11345.00 Hole cutter, 195 mm 0.10099.00 Hole cutter handle

230

190

IP20

IP43

LL2 - Six beam widths:very narrow, narrow, medium, wide

and Wall Washer Mira.80 mm IOS reflector made frommetallised polycarbonate (withlight collimator for symmetricbeams).Polycarbonate safety shield: clear,satin and satin/prismatic for theWall Washer Mira version.

driver

130x60x35h mm

195mm

Kit


52/166


83

Luminaire with adjustable optics for low voltage halogen lamps with built-in reflector, 20W/35W/50WOptics adjustment: horizontal 358, vertical 20Terminal board: IP30, complete with cable gland


170

148

QR-CB

GU 5,3


0.13700.00 not included 1x20/35/50 of the lamp 1.50

IP20

IP40 151mm

Luminaire with adjustable optics for low voltage halogen lamps, with built-in reflector 75WOptics adjustment: horizontal 358, vertical 20Terminal board: IP30, complete with cable gland

Accessories: (see page 87) 0.11345.00 Hole cutter, 195mm 0.10099.00 Hole cutter handle

230

190

QR-111

G 53


0.13783.00 Not included 1x75 of the lamp 1.79

IP20

IP43 195mm


53/166


84

Kit: fixed luminaire + IOS + control gear for metal halide lamps, 20W/35W/70W


170

148IP20

IP43



CDM-TC

G 8.5


KG

0.13702.00 HF 1x20 0.84 2x 7 1.38+0.27

0.13703.00 HF 1x20 0.79 2x17 1.38+0.27

0.13704.00 HF 1x20 0.77 2x28 1.38+0.27

0.13705.00 HF 1x35 0.84 2x 7 1.38+0.36

0.13706.00 HF 1x35 0.80 2x17 1.38+0.36

0.13707.00 HF 1x35 0.76 2x28 1.38+0.36

0.13708.00 HF 1x70 0.82 2x 8 1.38+0.40

0.13709.00 HF 1x70 0.81 2x17 1.38+0.40

0.13710.00 HF 1x70 0.84 2x29 1.38+0.40

HF

160x90x40h mm

151mm

Kit: luminaire with adju

Reggiani 02 Catalogue 2010 Recessed Luminaires

Documents

Transcript of Reggiani 02 Catalogue 2010 Recessed Luminaires