REDEFINING EXTRACTION TECHNOLOGY · IFE’s extractors are designed to offer some of the best...
7
Transcript of REDEFINING EXTRACTION TECHNOLOGY · IFE’s extractors are designed to offer some of the best...
Iron Fist Extractors’ (IFE) EX Series is the industry’s leading hydrocarbon closed-loop solution for laboratory extractions at SCALE. IFE is continuously raising the bar in qual-ity and efficiency in the extraction industry. IFE offers to four base models capable of processing 10 to 80 pounds of material at a time maximizing efficiency, time, and prof-itability.
Recover & Runtimes IFE’s extractors are designed to offer some of the best recovery and runtimes in the industry.
*Note: the above vessel and solvent capacities are rated at 60%, ASME allows for up to 80%.
REDEFINING EXTRACTION TECHNOLOGY
SYSTEM FEATURES
Capacity
MODEL
IFE EX – 10 EXTRACTORIFE EX – 20 EXTRACTOR IFE EX – 40 EXTRACTORIFE EX – 80 EXTRACTOR
MATERIALCAPACITY
10 LBS.20 LBS.40 LBS.80 LBS.
COLLECTIONVESSEL CAPACITY*
30 LBS.90 LBS.145 LBS.145 LBS. (x) 2
SOLVENT TANKCAPACITY*
32.5 LBS.90 LBS.130 LBS.130 LBS. (x) 2
*Note: Recover times above are based on the Haskel ADG 1.5. Recovery and runtimes are subjective to factors such as: solvent blend, operating temperatures, recovery pump performance, solvent to mate-rial ratio, how tight or loose the material is packed to the system, and the skill of the operator, as such the above recovery and runtimes may vary.
MODEL
IFE EX – 10 EXTRACTORIFE EX – 20 EXTRACTOR IFE EX – 40 EXTRACTORIFE EX – 80 EXTRACTOR
SOLVENT RECOVERYTIME (per minute) *
3/4 LB. to 2 LBS.3/4 LB. to 2 LBS.3/4 LB. to 2 LBS.3/4 LB. to 2 LBS.
RUNTIME (minutes)
15 to 5030 to 10060 to 20060 to 200
ironfistusa.com (877) 243-4201 [email protected]
Operating Temperatures: -30 to 110 FMax Pressure Rating: 250 psiSize: IFE EX Series Extractors have been designed for minimal footprint.
WHY IFE?
*Note: Dimensions are approximate figures and may change depending on design variations.
MODEL
IFE EX – 10 EXTRACTORIFE EX – 20 EXTRACTOR IFE EX – 40 EXTRACTORIFE EX – 80 EXTRACTOR
FOOTPRINT*
80” (L) X 38” (W) X 67” (H)
125” (L) X 42” (W) X 67” (H)
167” (L) X 42” (W) X 67” (H)
167” (L) X 67” (W) X 67” (H)
Quality & IntegrityMade in Washington, U.S.A. All IFE EX Series Extractors are built using the highest quality steel and components manufactured in the U.S.A.
CustomizableIFE EX Series Extractors can be customized to any specification -if you can dream it - we can build it.
Peer ReviewedIFE EX Series Extractor are reviewed by third-party professional engineers (3P Certz) and are certified for operation.
ironfistusa.com (877) 243-4201 [email protected]
CertifiedIFE’s EX Series Extractors meet or exceeds all industry listed standards for: ASME Section VIII, GMP, IFC 3904.4, NFPA 1: 38.6.1.5.6.1, 3-A Sanitary Standard, Class 1 Division 1, NSF and UL21.
VersatilityIFE’s EX Series Extractors are designed be flexible to run Propane, Butane, or blended hydrocarbon solvents.
Product ProductionIFE’s EX Series Extractor operators can produce ALL of today’s popular concentrated retail products, such as: Crude, Wax, Shatter, Crumble, Diamonds, Isolate, and more.
WHAT’S INCLUDED
(1) ASME Stamped 316 Stainless Steel (SS) Jacketed Collection Vessel with Stand and Locking Casters 2″ Sight Glass 1″ Sight Glass(1) ASME Stamped 316 SS Jacketed Solvent Tank with Stand and Locking CastersSS Jacketed Material Column(s)SS Expansion ColumnSS Material Column Rack with Locking CastersSS Pre-condensing CoilSS Post-condensing Coil304 SS High Pressure Clamp PackViton/FKM Sanitary Gasket KitSwagelok Hardware Kit (gauges, hoses, fittings, pressure relief valves)
ironfistusa.com (877) 243-4201 [email protected]
Haskel AGD 1.5 High-Pressure Positive-Displacement Piston Pump – Solvent Recovery Pump
Note: Operation requires a 10HP compressed air source capable of providing 25 CFM of air at 90 psi or higher, located in an area away from the gasses, with air filter filtering to 40 microns or better, Drive Air Pressure Regulator, and Drive Air Speed Control Valve. (Compressed air source not included).
PolyScience AD15R-40 15 Liter Refrigerated Circulator, -40°C – Pre-condensing Coil ChillerPolyScience 6160 -10°C 4.2L 1HP Chiller w/ Turbine Pump 100 PSI – Post-condensing Coil ChillerHuber CC-315B Circulator (Ambient +10° to 135°) – Collection Vessel HeaterArlyn F25 Floor Scale Edwards E2M28 Vacuum Pump Rated for Class 1 Div. 1 EnvironmentsEngineer Report with Engineer Stamp and Sign-off (3P Certz)Bill of Sale with Serial Number and Manufacture Date
pricing
*Note: The IFE EX Series may be purchased without the chillers, heater, pumps, and floor scale for a $35,000 discount off the base price.
MODEL
IFE EX – 10 EXTRACTOR (10 LB. Capacity)
IFE EX – 20 EXTRACTOR (20 LB. Capacity)
IFE EX – 40 EXTRACTOR (40 LB. Capacity)
IFE EX – 80 EXTRACTOR (80 LB. Capacity)
BASE PRICE
$105,000
$135,000
$165,000
$230,000
ironfistusa.com (877) 243-4201 [email protected]
*Note: All pricing and availability are subject to change without notice.
Accessory, Chiller, Pump Options, and Training
MODEL
Color Remediation Column (CRC) ChillersPro Chiller M5 SeriesPro Chiller M45 SeriesHUBER Unitstat 915wRecovery Pumps
MVP 150-1PH
OTHER OPTIONS
Training
Training
COLLECTIONVESSEL CAPACITY*
6”X24” SS IFE CRC Column
Material Column ChillerMaterial Column ChillerMaterial Column Chiller
The Master Vapor PumpModel MVP-150-1PH is acertified gas recoverypump designed tooperate at 150 PSI.Most solvent recovery pumps are compatiblewith IFE EX Series Extractors.Call us for details and pricing.
Comprehensive onsite3-day training and set-up.
SOLVENT TANKCAPACITY*
$3,400
$16,000
$25,000
$96,000
$14,000
CALL FOR QUOTE
$2,900
financing
Click here to apply
IRON FIST FABRICATORS, LLC | IRON FIST EXTRACTORS
Sweet Leaf Capital and Iron Fist Extractors are working together to facilitate a fast and easy way to get you the equipment you need for your business. Our industry leading financing program allows you to save cash, by making affordable monthly payments over time.
ironfistusa.com (877) 243-4201 [email protected]
ex-40
DISCLAIMER: Iron Fist Extractors (IFE) makes every attempt to comply with all local, state, and federal laws and regula-tions. Cannabis and industrial hemp extractions may prohibit under specific federal laws, IFE advises all parties to obtain independent legal advice concerning cannabis and industrial hemp extraction. IFE strongly recommends that only qualified professionals that are familiar with the engineering and chemistry involved with hydrocarbon extraction operate an IFE Extractor. The information contained in this booklet is if for informational purposes only and is subject to change without notice. All other terms and conditions apply.
ironfistusa.com (877) 243-4201 [email protected]
ex-10
ex-80 ex-20
ex-10ex-40
ex-20
