RECIF Technologies Bel
21
RECIF Technologies Bel We’ll make it. Precisely.
Transcript of RECIF Technologies Bel
RECIF Technologies Bel
We’ll make it. Precisely.
About the company
Company RECIF Technologies Bel (RTB) was founded in Belarus in 1993 by French industrial company RECIF Technologies. Having started from production of robotic components for the semiconductor industry, RTB has developed into a reliable outsourcing partner in high-precision materials processing. The company delivers to European customers as well to such companies from Russia and Belarus, which business is in in the aerospace, medical, optical, and oil and gas industries.
1993 The Company was founded
by the French concern RECIF Technologies.
>10yearsThe average employment
history enterprise staff members.
>150 Specialists work
in the enterprise.
>11 000 Our production capacity
working hours per month -.
ISO 9001:2008 Our quality management system is fully certified.
What are we doing
We provide services of high-precision processing of metals/alloys and engineering plastics, as well as a range of related services that help us to be unique in it kind: machining on turning and milling CNC processing
centers; galvanization; heat treatment; vibration technology of finishing; metrology and control on 3D measurement systems; development of production technologies and design
of parts and assemblies.
The high replicability of products is achieved both for milling and for turning due to unification of equipment and a high degrees of automation.
Specialization of RTB
We process frames and bodies of any combination of surfaces, high precision parts and cleanliness surfaces, as well as finalizing casts. Processed materials: Stainless steels and its alloys; Aluminum and titanium alloys; Structural steels; a wide range of engineering plastics (PPH,
PETP, PEEK, PA, PTFE, POM, PVDF и др.); copper, brass, bronze.
The uniqueness and quality of our products meets the customers from different industries
Aerospace Our parts are used in the Airbus aircraft.
Automotive industry Finalization of cast iron.
Shipbuilding Parts of deep-sea research vehicles.
Oil and gas industry Parts for deep drilling machines.
Optomechanical industry Bodies of optical devices
Medical industry Implants and prosthesis.
roduction facilities P
CNC milling centers
40 CNC milling centers CINCINNATI, USA. Fanuc, Acromatic, Heidenhain CNC systems
Positioning accuracy - 0.005 mm. Maximum machining dimensions :
600х800х1200 mm.
Housing part, an aluminum alloy, produced
from a bar Ø700 mm.
Turning machining centers
10 CNC turning machining centers CINCINNATI, USA. Fanuc, Acromatic CNC system.
Positioning accuracy - 0.005 mm. Maximum machining dimensions :
Ø350х600 mm.
Eccentric, bronze.
6 universal lathes.
Digital optical line X, Z Maximum machining dimensions :
Ø250х600 mm.
2 Turning duplex robotic machining centers Hyundai.
Ability to handle molding preforms made of cast iron.
Maximum machining dimensions : Ø30-300 mm, length 130 mm.
Series from 1000 to 30,000 parts per month
Turning duplex robotic machining centers
High-performance and high-precision equipment that allows to work with large batches of turned parts: discs, shafts, and etc.
Cast iron processing, Pulley crankshaft runout to the bore diameter no more than 0.005 mm.
Other equipment
Gear hobbing machines, close-grained.
Surface grinding machines.
Centerless grinding machine.
Before module 2, max Ø160 mm. Table 200х630 mm. Min Ø2 mm, max Ø30 mm.
Procuring workshop.
1
Galvanic coatings division
Coating by anodic oxide and chemical coatings on parts made of steel and aluminum alloys.
Line drawing of the zinc coating on steel parts (including with zinc chromate, zinc shining).
Equipment for chemical oxidation and passivation of aluminum alloys.
Equipment for chemical passivation of stainless steel.
Equipment for testing coatings for resistance the corrosion by the salt spray impact.
2
3
4
5
Due to the high technological discipline, experience and skill, we are able to perform processes of quality.
Types of galvanic coatings
An.oks. (OAS) - anodic oxide coating sulfate with gasket in distilled water and electrolytic chemical coloration. An.oks.nhr - anodic oxide sulphate coating with sealing in potassium dichromate. The coating thickness of 3 to 20 microns. Zn.6.Cr. – zinc with a thickness of 6 - 15 microns with a colorless chromated. Zn.9.Cr. – zinc thickness of 9 mm with iridescent chromate followed by varnishing. Zn.6.Cr.Shiny – zinc thickness of 6 microns with a colorless chromate shiny. Alodine – chemical oxidation of aluminum alloys in metal salts of hexavalent chromium. SurTech 650 –chemical oxidation of aluminum alloys in metal salts of trivalent chromium, eco-friendly. Chem.pass – chemical passivation of stainless steels and alloys.
Heat treatment equipment
Heat treatment of billets and parts: hardening; tempering; annealing; normalising.
Finishing by vibration processing (TROWAL, Germany)
This type of finishing allows to remove the traces of machining, improve the condition of the surface. Results in polishing, deburring, rounding off sharp edges the result. This process using friction wears. It does not amend to dimensional and geometric precision articles processed parts. Applied of plastics, aluminum alloys, non-ferrous metals, stainless steels etc.
Precision and quality control lab
Control of components to meet the requirements of the design documentation. The high level of training of specialists and high-tech equipment: MISTRAL Control and Measurement System – 3D program control
(automatic print of control results), the accuracy is 0.003mm; Measuring columns (measurement precision -0.005mm); Microscopes; devices for hardness and conductivity measurement.
Control coatings: control of coating thickness; control of protective properties; filling control; salt fog spray test.
Management system complies with ISO 9001: 2008
Accredited calibration laboratory. Accredited by the STB ISO / IEC 1705 calibration laboratory performs calibration of measuring instruments, geometric quantities and technical precision measurement.
Technological Bureau
Highly qualified of technologists provide the following services: the creation of 3D-models of parts; verification of 3D-models for
compliance with the requirements of the drawing;
the development of control programs for machining centers;
the development of technology components, including design and manufacturing of tooling.
Related services
We are ready to take over and control even those operations that are not our direct specialization: engineering services, if necessary, recourse
to subcontractors;
locksmithing and assembly operations;
transport services and so on.
Samples of our production
Housing, steel shanks runout 0.01 mm, shank axis perpendicular to the axis of
the holes of 0.02 mm.
Housing, aluminum alloy plating, great hole diameters up to 0.01 mm.
Samples of our production
The body, duralumin D16T, made from billet 300х250х200 mm.
Housing, aluminum alloy plating.
Samples of our production
Housing, titanium 5B, great holes on 6H Сast iron processing, Crown damper runout with respect to the bore
diameter of 0.005 mm.
Contact Us
Yuri Zaiats (director) +375 (29) 651-43-07 [email protected]
Aliaksei Pakhomchyk +375 29 750 08 18 [email protected]
LLC "RECIF Technologies Bel"
14-247 Korzhenevskogo st., Minsk, Republic of Belarus,220108
+375 (17) 207 02 50 +375 (17) 210 25 74 fax
www.reciftech.by
Igor Vlasenko +375 29 384 92 23 [email protected]
