Rear Lamp Assembly Removal and Installation
-
Upload
michael-hernandez -
Category
Documents
-
view
29 -
download
3
Transcript of Rear Lamp Assembly Removal and Installation
-
2014 Ford Explorer Submodel: | Engine Type: | Liters: Fuel Delivery: | Fuel:
417-01 Exterior Lighting 2014 ExplorerREMOVAL AND INSTALLATION Procedure revision date: 06/03/2013
Rear Lamp AssemblyExploded View
Item Service Part Number Description Tool Number Material Name Notes1 W715731 Rear lamp assembly bolt covers (2 required) - - -2 W712801 Rear lamp assembly bolt (2 required) - - -3 13404 / 13405 Rear lamp assembly (Right Hand (RH) / Left Hand (LH)) - - -4 W713579 Rear lamp assembly clip - - -5 13A457 Rear lamp assembly upper grommet - - -6 13466 Rear lamp assembly upper bulb - - -7 13466 Rear lamp assembly lower bulb - - -8 13A457 Rear lamp assembly lower grommet - - -9 W711031 Rear lamp assembly nuts (2 required) - - -10 13410 Rear lamp socket assembly - - -
Removal
WARNING: Before beginning any service procedure in this section, refer to Safety Warnings in Section 100-00. Failure to follow this instruction may result inserious personal injury.
1. Remove the 2 rear lamp assembly bolt covers.
2. Remove the 2 rear lamp assembly bolts.
3. Remove the rear lamp assembly and disconnect the electrical connectors.Installation
1. Connect the electrical connectors and install the rear lamp assembly.
2. Install the 2 rear lamp assembly bolts.
1. Tighten to 3 Nm (27 lb-in).
3. Install the 2 rear lamp assembly bolt covers.
Copyright 2013 Ford Motor Company