READ ME FIRST! Setup Instructions - … ME FIRST! Setup Instructions Check that all these components...
2
Mobile Network 1. Disconnect all power on your network, including your cable or DSL modem and router. 2. Plug one end of the yellow Ethernet cable into your broadband modem. 3. Connect the other end of the cable into the yellow WAN port at the back of the AIRAVE. 4. Reconnect power to your cable or DSL modem and wait about two minutes for the modem to power up and initialize. 5. Plug the power supply connector into the back of the AIRAVE. 6. Plug the other end of the power cord into an available electrical outlet. READ ME FIRST! Setup Instructions Check that all these components are in the box: AIRAVE 2.5 Printed Materials Power Cord Yellow Ethernet Cable External GPS Antenna Cable Before You Install Your AIRAVE Install Your AIRAVE Note: You will also need a working electrical outlet and a broadband connection (cable, DSL, etc.) to use this device. LAN 1 WAN 12VDC To Broadband Modem AIRAVE WAN 12VDC continued on other side 2 3 5 6 1 4 The AIRAVE 2.5 you requested is enclosed. The AIRAVE provides a boosted signal for your wireless voice and 3G data services. It’s like having your very own cell tower. 1. Follow the diagram below to connect the antenna to the AIRAVE. 2. Place the GPS antenna on a flat surface and next to a closed window, if possible. Note: It may take up to 30 minutes for the GPS LED light to become solid green. LAN 2 Reset LAN 1 WAN 12VDC GPS Connect the External GPS Antenna Note: In large homes, the external GPS antenna can be used to allow the AIRAVE to be placed in a more central location, allowing for more even coverage throughout the house. Advanced Tech Support for AIRAVE: 1-866-556-7310
Transcript of READ ME FIRST! Setup Instructions - … ME FIRST! Setup Instructions Check that all these components...
Mobile
Network
GPS
Broadband
1.Disconnect all power on your network, including your cable or DSL modem and router.
2. Plug one end of the yellow Ethernet cable into your broadband modem.
3.Connect the other end of the cable into the yellow WAN port at the back of the AIRAVE.
4.Reconnect power to your cable or DSL modem and wait about two minutes for the modem to power up and initialize.
5.Plug the power supply connector into the back of the AIRAVE.
6.Plug the other end of the power cord into an available electrical outlet.
READ ME FIRST! Setup Instructions
Check that all these components are in the box:
AIRAVE 2.5
Printed Materials
Power Cord
Yellow Ethernet Cable
External GPS Antenna Cable
Before You Install Your AIRAVE
Install Your AIRAVE
Note: You will also need a working electrical outlet and a broadband connection (cable, DSL, etc.) to use this device.
LAN 2
LAN 1
WAN
12VDC
ToBroadbandModem
AIRAVE
LAN 1
WAN
12VDC
to PowerSupply
contin
ued on
other s
ide
2
3
5
6
1
4
The AIRAVE 2.5 you requested is enclosed. The AIRAVE provides a boosted signal for your wireless voice and 3G data services. It’s like having your very own cell tower. 1. Follow the diagram below to connect the antenna
to the AIRAVE.
2. Place the GPS antenna on a flat surface and next to a closed window, if possible.
Note: It may take up to 30 minutes for the GPS LED light to become solid green.
LAN 2
Reset
LAN 1
WAN
12VDC
GPS
Mobile
Network
GPS
Broadband
Connect the External GPS Antenna
Note: In large homes, the external GPS antenna can be used to allow the AIRAVE to be placed in a more central location, allowing for more even coverage throughout the house.
Advanced Tech Support for AIRAVE: 1-866-556-7310
ResourcesIf your AIRAVE is still not working, you have several resources that will have you up and running in no time:
• IntheBox
The Technical and Troubleshooting Guide, with expanded details.
•Online(sprint.com/airaveaccesspoint)
• FAQs, technical documentation, and more.
• The latest User Guide, with detailed instructions for advanced features.
•Phone
Advanced Tech Support for AIRAVE: 1-866-556-7310
PC or LAN (local area network) Router: Connect your PC, your LAN router, or both to the AIRAVE’s LAN ports.
PC or LAN Router Option
LAN 2
Reset
LAN 1
WAN
12VDC
GPS
Check Your Connection
Your AIRAVE’s LED lights will flash as your device initializes and acquires a GPS lock.
When the Mobile, Network, GPS, and Broadband LED lights have stopped blinking, your AIRAVE is ready to use.
Thisprocesscantakeuptotwohours.Donotinterrupttheprocessduringthistime.
Once the four LED lights have stopped blinking and are a steady green, test your AIRAVE connection:
Dial *99 on any Sprint phone. You should hear a message that says “You are now within AIRAVE coverage.”
Note: You will hear three short beeps when placing or answering calls on your wireless phone if you are within range of the AIRAVE.
Important: To ensure the best voice and data quality, always connect the LAN router to your AIRAVE. Do not connect the router directly to your broadband modem or other broadband connection device.
WAIT
TheAIRAVEwilldisplaysolidgreenlightswhenitisactivatedandfunctioningproperly.
©2012Sprint.SPRINTandthelogoaretrademarksofSprint.Othermarksarepropertyoftheirrespectiveowners. 911902
READ ME FIRST! Setup Instructions (Continued)
Advanced Tech Support for AIRAVE: 1-866-556-7310
