RDS MP3 CD Receiver CDE-9848RB/CDE-9846R/ DE CDE-9846RM€¦ · CDE-9848RB/CDE-9846R/ CDE-9846RM...

EN

DE

FR

ES

IT

SE

R

FOR CAR USE ONLY/NUR FÜR AUTOMOBIL GEBRAUCH/POUR APPLICATION AUTOMOBILE UNIQUEMENT/PARA USO EN AUTOMÓVILES/SOLO PER L’UTILIZZO IN AUTOMOBILE/ENDAST FÖR BILBRUK

Designed by ALPINE JapanPrinted in China (Y)

68-04123Z33-A

• OWNER’S MANUALPlease read before using this equipment.

• BEDIENUNGSANLEITUNGLesen Sie diese Bedienungsanleitung bitte vor Gebrauch des Gerätes.

• MODE D’EMPLOIVeuillez lire avant d’utiliser cet appareil.

• MANUAL DE OPERACIÓNLéalo antes de utilizar este equipo.

• ISTRUZIONI PER L’USOSi prega di leggere prima di utilizzare il attrezzatura.

• ANVÄNDARHANDLEDNINGInnan du använder utrustningen bör du läsa igenom denna användarhandledning.

Dalian Dongtai Colour Printing Technology Co., Ltd.No.24 Liaohexisan Road, Dalian Economic&TechnicalDevelopment Zone, China

RDS MP3 CD Receiver

CDE-9848RB/CDE-9846R/CDE-9846RM

ALPINE ELECTRONICS MARKETING, INC. 1-1-8 Nishi Gotanda,

Shinagawa-ku,Tokyo 141-0031, JapanPhone 03-5496-8231

ALPINE ELECTRONICS OF AMERICA, INC.19145 Gramercy Place, Torrance,

California 90501, U.S.A.Phone 1-800-ALPINE-1 (1-800-257-4631)

ALPINE ELECTRONICS OF CANADA, INC.777 Supertest Road, Toronto,

Ontario M3J 2M9, CanadaPhone 1-800-ALPINE-1 (1-800-257-4631)

ALPINE ITALIA S.p.A.Viale C. Colombo 8, 20090 Trezzano

Sul Naviglio (MI), ItalyPhone 02-484781

ALPINE ELECTRONICS DE ESPAÑA, S.A.Portal de Gamarra 36, Pabellón, 32

01013 Vitoria (Alava)-APDO 133, SpainPhone 945-283588

ALPINE ELECTRONICS (BENELUX) GmbHLeuvensesteenweg 510-B6,

1930 Zaventem, BelgiumPhone 02-725-13 15

ALPINE ELECTRONICS OF AUSTRALIA PTY. LTD.161-165 Princes Highway, Hallam

Victoria 3803, AustraliaPhone 03-8787-1200

ALPINE ELECTRONICS GmbHFrankfurter Ring 117, 80807 München, Germany

Phone 089-32 42 640

ALPINE ELECTRONICS OF U.K. LTD.Alpine House

Fletchamstead Highway, Coventry CV4 9TW, U.K.Phone 0870-33 33 763

ALPINE ELECTRONICS FRANCE S.A.R.L.(RCS PONTOISE B 338 101 280)

98, Rue de la Belle Etoile, Z.I. Paris Nord Il,B.P. 50016, 95945 Roissy Charles de Gaulle

Cedex, FrancePhone 01-48638989

1-EN

ENGLISH

ContentsOperating Instructions

WARNING

WARNING .................................................. 2

CAUTION ................................................... 2

PRECAUTIONS ......................................... 2

Getting StartedTurning Power On and Off ............................... 5Detaching and Attaching the Front Panel ......... 5Initial System Start-Up ..................................... 5Adjusting Volume ............................................. 5

RadioListening to Radio ............................................. 6Manual Storing of Station Presets .................... 6Automatic Memory of Station Presets .............. 6Tuning to Preset Stations .................................. 6

RDSSetting RDS Reception Mode and Receiving

RDS Stations ................................................. 7Recalling Preset RDS Stations .......................... 7Receiving RDS Regional (Local) Stations ....... 7PI SEEK Setting ................................................ 8Receiving Traffic Information .......................... 8PTY (Programme Type) Tuning ....................... 8Receiving Traffic Information While Playing

CD or Radio ................................................... 9Priority News .................................................... 9Displaying Radio Text ...................................... 9

CD/MP3Playback .......................................................... 10Repeat Play ..................................................... 11M.I.X. (Random Play) .................................... 11Scanning Programmes .................................... 11Searching from CD Text ................................. 11File/Folder Name Search (concerning MP3) .... 11Quick Search (CDE-9848RB only) .................. 12About MP3 ...................................................... 12

Sound SettingAdjusting Bass/Treble/Balance (Between Left

and Right)/Fader (Between Front and Rear)/Defeat .......................................................... 13

Setting the Bass Control ................................. 14Setting the Treble Control ............................... 14Turning Loudness On/Off ............................... 14

Other FunctionsDisplaying the Title/Text ................................. 15Titling Discs .................................................... 16Erasing Disc Title ............................................ 16

SETUPSound Customizing

Adjusting Source Signal Levels ...................... 17Subwoofer On and Off .................................... 17

Visual CustomizingDimmer Control (CDE-9848RB only) ........... 17Scroll Setting ................................................... 17Scroll Type Setting .......................................... 17

MP3Playing MP3 Data ........................................... 17

External DeviceSetting the AUX Mode

(CDE-9848RB only) .................................... 17Connecting to an External Amplifier .............. 17

InformationIn Case of Difficulty ....................................... 18Specifications .................................................. 19

Installation and ConnectionsWarning ........................................................... 20Caution ............................................................ 20Precautions ...................................................... 20Installation ...................................................... 21Connections ...................................................... 22

2-EN

WARNING

WARNINGThis symbol means important instructions. Failureto heed them can result in serious injury or death.

DO NOT OPERATE ANY FUNCTION THAT TAKES YOURATTENTION AWAY FROM SAFELY DRIVING YOURVEHICLE.Any function that requires your prolonged attention should onlybe performed after coming to a complete stop. Always stop thevehicle in a safe location before performing these functions.Failure to do so may result in an accident.

KEEP THE VOLUME AT A LEVEL WHERE YOU CAN STILLHEAR OUTSIDE NOISE WHILE DRIVING.Failure to do so may result in an accident.

DO NOT DISASSEMBLE OR ALTER.Doing so may result in an accident, fire or electric shock.

USE ONLY IN CARS WITH A 12 VOLT NEGATIVE GROUND.(Check with your dealer if you are not sure.) Failure to do so mayresult in fire, etc.

KEEP SMALL OBJECTS SUCH AS BATTERIES OUT OF THEREACH OF CHILDREN.Swallowing them may result in serious injury. If swallowed,consult a physician immediately.

USE THE CORRECT AMPERE RATING WHEN REPLACINGFUSES.Failure to do so may result in fire or electric shock.

DO NOT BLOCK VENTS OR RADIATOR PANELS.Doing so may cause heat to build up inside and may result in fire.

USE THIS PRODUCT FOR MOBILE 12V APPLICATIONS.Use for other than its designed application may result in fire,electric shock or other injury.

DO NOT PLACE HANDS, FINGERS OR FOREIGN OBJECTSIN INSERTION SLOTS OR GAPS.Doing so may result in personal injury or damage to the product.

CAUTIONThis symbol means important instructions. Failureto heed them can result in injury or materialproperty damage.

HALT USE IMMEDIATELY IF A PROBLEM APPEARS.Failure to do so may cause personal injury or damage to theproduct. Return it to your authorized Alpine dealer or the nearestAlpine Service Centre for repairing.

PRECAUTIONSProduct CleaningUse a soft dry cloth for periodic cleaning of the product. Formore severe stains, please dampen the cloth with water only.Anything else has the chance of dissolving the paint or damagingthe plastic.

TemperatureBe sure the temperature inside the vehicle is between +60°C(+140°F) and –10°C (+14°F) before turning your unit on.

Moisture CondensationYou may notice the CD playback sound wavering due tocondensation. If this happens, remove the disc from the playerand wait about an hour for the moisture to evaporate.

Damaged DiscDo not attempt to play cracked, warped, or damaged discs.Playing a bad disc could severely damage the playbackmechanism.

MaintenanceIf you have problems, do not attempt to repair the unit yourself.Return it to your Alpine dealer or the nearest Alpine ServiceStation for servicing.

Operating Instructions

3-EN

Correct HandlingDo not drop the disc while handling. Hold the disc so you willnot leave fingerprints on the surface. Do not affix tape, paper, orgummed labels to the disc. Do not write on the disc.

Disc CleaningFingerprints, dust, or soil on the surface of the disc could causethe CD player to skip. For routine cleaning, wipe the playingsurface with a clean, soft cloth from the centre of the disc to theouter edge. If the surface is heavily soiled, dampen a clean, softcloth in a solution of mild neutral detergent before cleaning thedisc.

Disc AccessoriesThere are various accessories available on the market forprotecting the disc surface and improving sound quality.However, most of them will influence the thickness and/ordiameter of the disc. Using such accessories can cause the disc tobe out of standard specifications and may create operationalproblems. We recommend not using these accessories on discsplayed in Alpine CD players.

PRECAUTIONSNever Attempt the FollowingDo not grip or pull out the disc while it is being pulled back intothe player by the automatic reloading mechanism.Do not attempt to insert a disc into the unit when the unit poweris off.

Inserting DiscsYour player accepts only one disc at a time for playback. Do notattempt to load more than one disc.Make sure the label side is facing up when you insert the disc.“ERROR” will be displayed on your player if you insert a discincorrectly. If “ERROR” continues to be displayed even thoughthe disc has been inserted correctly, push the RESET switch witha pointed object such as a ballpoint pen.Playing a disc while driving on a very bumpy road may result inskips, but this will not scratch the disc or damage the player.

New DiscsAs a protective measure to prevent the CD from jamming,“ERROR” will be displayed if discs with irregular surface areinserted or inserted incorrectly. When a new disc is inserted intothe player and ejected after initial loading, using your finger, feelaround the inside of the centre hole and outside edge of the disc.If you feel any small bumps or irregularities, this could inhibitproper loading of the disc. To remove the bumps, rub the insideedge of the hole and outside edge of the disc with a ballpoint penor other such instrument, then insert the disc again.

Irregular Shaped DiscsBe sure to use round shape discs only for this unit and never useany special shape discs.Use of special shape discs may cause damage to the mechanism.

Installation LocationMake sure the CDE-9848RB/CDE-9846R/CDE-9846RM will notbe installed in a location subjected to:

• Direct sun and heat• High humidity and water• Excessive dust• Excessive vibrations

Centre Hole

Bumps

Centre Hole NewDisc

Outside(Bumps)

CORRECT

INCORRECT CORRECT

Disc StabilizerTransparent Sheet

Continued

4-EN

On handling Compact Discs (CD/CD-R/CD-RW)

• Do not touch the surface.• Do not expose the disc to direct sunlight.• Do not affix stickers or labels.• Clean the disc when it is dusty.• Make sure that there are no bumps around the disc.• Do not use commercially available disc accessories.

Do not leave the disc in the car or the unit for a longtime. Never expose the disc to direct sunlight. Heatand humidity may damage the CD and you may not beable to play it again.

To customers using CD-R/CD-RW

• If a CD-R/CD-RW cannot be played back, make sure the lastrecording session was closed (finalized).

• Finalize the CD-R/CD-RW if necessary, and attempt playbackagain.

About media that can be played.

Use only compact discs with the label side showing the CD logomarks below.

If you use unspecified compact discs, correct performance cannotbe guaranteed.You can play CD-Rs (CD-Recordable)/CD-RWs (CD-ReWritable) which have been recorded only on audio devices.You can also play CD-Rs/CD-RWs containing MP3 formattedaudio files.

• Some of the following CDs may not play on this unit:Flawed CDs, CDs with fingerprints, CDs exposed to extremetemperatures or sunlight (e.g., left in the car or this unit), CDsrecorded under unstable conditions, CDs on which arecording failed or a re-recording was attempted, copy-protected CDs which do not conform to the audio CDindustry standard.

• Use discs with MP3 files written in a format compatible withthis unit. For details, see pages 12-13.

• “MPEG Layer-3 audio coding technology licensed fromFraunhofer llS and Thomson”

• “Supply of this product only conveys a license for private, non-commercial use and does not convey a license nor imply any rightto use this product in any commercial (i.e. revenue-generation)real time broadcasting (terrestrial, satellite, cable and/or anyother media), broadcasting/streaming via internet, intranets and/or other networks or in other electronic content distributionsystems, such as pay-audio or audio-on-demand applications. Anindependent license for such use is required. For details, pleasevisit http://www. mp3licensing.com.”

5-EN

Getting StartedCDE-9848RB

CDE-9846R/CDE-9846RM

Turning Power On and Off

Press SOURCE/POWER to turn on the unit.

• The unit can be turned on by pressing any other button except ejectc.

Press and hold SOURCE/POWER for at least 2seconds to turn off the unit.

• The first time power is turned on, the volume will start from level 12.

Detaching and Attaching the Front PanelDetaching

1 Turn off the unit power.

2 Press (Release) at the lower left side until thefront panel pops out.

3 Grasp the left side of the front panel and pull it out.

• The front panel may become hot in normal usage (especially theconnector terminals on the back of the front panel). This is not amalfunction.

• To protect the front panel, place it in the supplied carrying case.

Attaching

1 Insert the right side of the front panel into the mainunit. Align the groove on the front panel with theprojections on the main unit.

2 Push the left side of the front panel until it locksfirmly into the main unit.

2

11

• Before attaching the front panel, make sure that there is no dirt ordust on the connector terminals and no foreign object between thefront panel and the main unit.

• Attach the front panel carefully, holding the sides of the front panelto avoid pushing buttons by mistake.

Initial System Start-UpBe sure to press the RESET switch when using the unit for the firsttime, after changing the car battery, etc.

1 Turn off the unit power.

2 Remove the detachable front panel.

3 Press RESET with a ballpoint pen or similarpointed object.

1

Adjusting Volume

Turn the Rotary encoder (CDE-9848RB only) or press44444 and 33333 (CDE-9846R/CDE-9846RM only) until thedesired sound is obtained.

Connectable to Steering Remote Control Interface BoxYou can operate this unit from the vehicle's control unit when anAlpine Steering Remote Control Interface Box (optional) isconnected. For details, contact your Alpine dealer.

SOURCE/POWER

Rotary encoder

SOURCE/POWER4

3

RESET switch

6-EN

RadioCDE-9848RB


Manual Storing of Station Presets

1 Select the radio band and tune in a desired radiostation you wish to store in the preset memory.

2 Press and hold, for at least 2 seconds, any one ofthe preset buttons (1 through 6) that you wantto store the station on.The selected station is stored.The display shows the band, preset number and stationfrequency memorized.

• A total of 30 stations can be stored in the preset memory (6 stationsfor each band: FM1, FM2, FM3, MW and LW).

• If you store a station in a preset memory which already has astation, the current station will be cleared and replaced with thenew station.

• If the “F” indicator is illuminated, turn off the indicator bypressing FUNC./SETUP, then you can perform the operation.

Automatic Memory of Station Presets

1 Press BAND repeatedly until the desired radioband is displayed.

2 Press and hold TUNE/A.ME for at least 2 seconds.The frequency on the display continues to change whilethe automatic memory is in progress. The tuner willautomatically seek and store 6 strong stations in theselected band. They will be stored into buttons 1 to 6 inorder of signal strength.When the automatic memory has been completed, thetuner goes to the station stored in preset location No.1.

• If no stations are stored, the tuner will return to the original stationyou were listening to before the auto memory procedure began.

Tuning to Preset Stations

1 Press BAND repeatedly until the desired band isdisplayed.

2 Press any one of the station preset buttons (1through 6) that has your desired radio station inmemory.The display shows the band, preset number andfrequency of the station selected.

• If the “F” indicator is illuminated, turn off the indicator bypressing FUNC./SETUP, then you can perform the operation.

SOURCE/POWER

SOURCE/POWER

Listening to Radio

1 Press SOURCE/POWER until a radio frequencyappears in the display.

2 Press BAND repeatedly until the desired radioband is displayed.

F1 (FM1) → F2 (FM2) → F3 (FM3) → MW → LW → F1 (FM1)

3 Press TUNE/A.ME to select the tuning mode.

DX SEEK (Distance mode) → SEEK (Local mode) →OFF (Manual mode) → DX SEEK

• The initial mode is Distance mode.

Distance mode:Both strong and weak stations will be automatically tuned in(Automatic Seek Tuning).

Local mode:Only strong stations will be automatically tuned in (AutomaticSeek Tuning).

Manual mode:The frequency is manually tuned in steps (Manual tuning).

4 Press g or f to tune in the desired station.Holding down g or f will change the frequencycontinuously.

• The ST indicator appears on the display when a stereo FM stationis tuned in.

BAND

g f

TUNE/A.ME

Preset buttons(1 through 6)

FUNC./SETUP

TUNE/A.MEBAND

g fFUNC./SETUP Preset buttons

(1 through 6)

7-EN

RDSCDE-9848RB


Setting RDS Reception Mode and ReceivingRDS StationsThe RDS (Radio Data System) is a radio information system usingthe 57 kHz subcarrier of regular FM broadcast. The RDS allows youto receive a variety of information such as traffic information, stationnames, and to automatically re-tune to a stronger transmitter that isbroadcasting the same programme.

1 Press FUNC./SETUP so that the “F” indicatorlights up.

2 Press 19/AF to activate the RDS mode.

3 Press g or f to tune in the desired RDSstation.

4 Press 19/AF again to deactivate the RDS mode.

5 Press FUNC./SETUP to activate the normal mode.The “F” indicator goes out.

The RDS digital data includes the following:PI Programme IdentificationPS Programme Service NameAF List of Alternative FrequenciesTP Traffic ProgrammeTA Traffic AnnouncementPTY Programme TypeEON Enhanced Other Networks

Recalling Preset RDS Stations


2 Press 19/AF to activate the RDS mode.


4 Make sure that the “F” indicator light goes out, thenpress the preset button in which your desired RDSstation is preset.If the preset station’s signal is weak, the unit automaticallysearches and tunes to a stronger station in the AF(Alternative Frequencies) list.

5 If the preset station and the stations in the AF listcannot be received:When the PI SEEK setting is on (refer to “PI SEEK Setting”on page 8), the unit searches again for a station in the PI(Programme Identification) list.If there are still no stations receivable in the area, the unitdisplays the frequency of the preset station and the presetno. disappears.If the signal level of the Regional (Local) station beingtuned becomes too weak to receive, press the samepreset button to tune in a Regional station in other district.

• For presetting the RDS stations, refer to the Radio Operationsection. The RDS stations can be preset in the F1, F2 and F3 bandsonly.

Receiving RDS Regional (Local) Stations

1 Press and hold FUNC./SETUP for at least 2seconds to activate the setting mode.

2 Press g or f to select “REG”.

3 Press BAND to toggle the mode between“ON” and “OFF.”In the REG OFF mode, the unit automatically keepsreceiving the related local RDS station.

4 Press FUNC./SETUP to deactivate the settingmode.

• Operate the unit while the “F” indicator lights up. If no operationis performed within 10 seconds, the “F” indicator goes out.

g f

3 /PTY

BAND

FUNC./SETUP 19/AF TITLE82/NEWSTA

g f

3 /PTY

BAND

FUNC./SETUP 19/AF TITLE82/NEWSTA

8-EN

PI SEEK Setting

1 Press and hold FUNC./SETUP for at least 2seconds.

2 Press g or f to select “PISK.”

3 Press BAND to toggle the mode between“ON” and “OFF.”

4 Press FUNC./SETUP to set the selected mode.

Receiving Traffic Information

1 Press TA so that the “TA” indicator lights up.

2 Press g or f to select your desired trafficinformation station.

When a traffic information station is tuned in, the “TP”indicator lights up.Traffic information is heard only when it is beingbroadcast. If traffic information is not being broadcast, theunit is set in the standby mode. When a traffic informationbroadcast begins, the unit automatically receives it andthe display shows “TRF-INFO” for a few seconds andreturns to the PS display.When the traffic information broadcast is over, the unit willautomatically set in the standby mode.

• If the traffic information broadcast signal falls below a certainlevel, the unit remains in the receiving mode for 1 minute. If thesignal remains below a certain level for over 1 minute, the “TA”indicator blinks.

• If you do not want to listen to the traffic information beingreceived, lightly press TA to skip that traffic information message.The TA mode will remain in the ON position to receive the nexttraffic information message.

• If the volume level is changed while receiving traffic information,the changed volume level will be memorized. When trafficinformation is received next time, the volume level will beautomatically adjusted to the level memorized.

• In the TA mode, the SEEK tuning selects only the TP stations.

PTY (Programme Type) Tuning


2 Press 3 /PTY to activate the PTY mode, whilethe unit is in Radio (FM receiving) mode.The Programme Type of the station being currently receivedwill be displayed for 10 seconds.If there is no receivable PTY broadcast, “NO PTY” will bedisplayed for 10 seconds.If no RDS station can be received, the display shows “NOPTY.”

• If no operation is performed within 10 seconds after pressing3 /PTY, the PTY mode will be automatically cancelled.

3 Press g or f within 10 seconds afteractivating the PTY mode to choose the desiredprogramme type while the PTY (programme type)is being displayed.Each press scrolls the programme type by one.

4 Press 3 /PTY within 10 seconds after selectingthe programme type to start searching for a stationin the selected programme type.The chosen programme type display blinks duringsearching and lights when a station is found.

If no PTY station is found, “NO PTY” will be displayed for10 seconds.



LIGHT M ↔ CLASSICS ↔ OTHER M

9-EN

Receiving Traffic Information While PlayingCD or Radio

1 Press TA so that the “TA” indicator lights up.

2 Press g or f to select a traffic informationstation if necessary.

When a traffic information broadcast starts, the unitautomatically mutes the CD player or the regular FMbroadcast.When the traffic information broadcast finishes, the unitautomatically returns to the original source play before thetraffic information broadcast began.

When traffic information stations cannot be received:In the tuner mode:When the TP signal can no longer be received for over 1minute, the “TA” indicator blinks.

In the CD mode:When the TP signal can no longer be received, the trafficinformation station of another frequency will be selectedautomatically.

• The receiver is equipped with the EON (Enhanced OtherNetworks) function in order to keep track of additional alternatefrequencies to the AF list. The “EON” indicator lights up while anRDS EON station is being received. If the station being receiveddoes not broadcast the traffic information, the receiverautomatically tunes in the related station that broadcasts the trafficinformation when it occurs.

3 Press TA to deactivate the Traffic Informationmode.The “TA” indicator goes out.

Priority NewsThis function allows you to preset to give priority to the Newsprogramme. You will never miss the News programme as the unitautomatically gives priority to the News programme whenever itbegins broadcasting, and interrupts the programme you are currentlylistening. This feature is functional when your unit is set to a modeother than the LW and MW modes.

1 Press FUNC./SETUP so that the “F” indicatorlights up while the unit is in Radio (FM receiving)mode.

2 Press 82/NEWS to activate the PRIORITY NEWSmode.The “NEWS” indicator appears in the display.To disable the PRIORITY NEWS function, press82/NEWS.

• In the PRIORITY NEWS function, unlike in the TA function, thevolume does not increase automatically.

3 Press FUNC./SETUP to activate the normal mode.The “F” indicator light goes out.


Displaying Radio TextText messages from a radio station can be displayed.

Press TITLE while receiving FM in the radio mode toselect the Radio Text display.

The display will change every time the button is pressed.

PS (Programme Service Name) → Radio Text → FREQUENCY→ PS (Programme Service Name)

The display shows “WAITING” for a few seconds, then startsscrolling the text message.

• If there is no receivable text message or the unit cannot receive atext message properly, the display shows “NO TEXT.”

10-EN

CD/MP3CDE-9848RB


Playback

1 Insert a disc with the label side facing up.The disc will be pulled into the unit automatically.

When a disc is already inserted, press SOURCE/POWERto switch to the CD mode.

The mode will change every time the button is pressed.

TUNER → CD → TUNER

2 While playing back MP3, press 19/AF or 82/NEWSto select the desired folder.Pressing and holding 19/AF or 82/NEWS will changefolders continuously.

3 Press g or f to select the desired track (file).

Returning to the beginning of the current track (file):Press g.

Fast backward:Press and hold g.

Advancing to the beginning of the next track (file):Press f.

Fast forward:Press and hold f.

4 To pause playback, press -/J.Pressing -/J again will resume playback.

5 To eject the disc, press c.

• Do not remove a CD during its eject cycle. Do not load more thanone disc at a time. A malfunction may result from doing either.

• If the CD does not eject, press and hold c for at least 2 seconds.• The CD-player can play discs containing audio data and MP3

data.• “MP3” is displayed during MP3 playback .• The track display for MP3 data playback is the file numbers

recorded on the disc.

MP3 Play DisplayThe folder number and file number will be displayed as describedbelow.

• If the folder number or file number are three digits, “F” or “T” isnot displayed.

• Press TITLE to switch the display. Please see “Displaying theTitle/Text” (page 15) for information about display switching.

c

-/J g f

43

19/AF

82/NEWS

3 /PTY

5

MODESOURCE/POWER

c-/J

Rotaryencoder

6 4 5 g f

19/AF82/NEWS

3 /PTY

SOURCE/POWER

Folder numberdisplay

File numberdisplay

6 4

TITLE

TITLE

MP3 F01 T03

11-EN

Scanning Programmes

1 Press 6 to activate the Scan mode in the playmode.The first 10 seconds of each track (file) will be playedback in succession.

To stop scanning, press 6 again and deactivate theScan mode.

Searching from CD TextTracks can be searched and played by using the CD text on the disc.In the case of discs that do not support text, searches can be made byusing the track numbers.

1 Press 3 /PTY in the play mode.This will set the search mode.

2 Turn the Rotary encoder (CDE-9848RB) or press44444 and 33333 (CDE-9846R/CDE-9846RM) to select thedesired track, then press the Rotary encoder(CDE-9848RB) or MODE (CDE-9846R/CDE-9846RM).This will play the selected track.

• Press and hold 3 /PTY for at least 2 seconds in the search modeto cancel. Or, the search mode will be cancelled when an operationhas not been performed in 10 seconds.

• CD text search cannot be made during M.I.X. play.

File/Folder Name Search (concerning MP3)You can display and search for the folder and file name whilelistening to the file currently being played back.

1 Press 3 /PTY to select File Name Search modeor Folder Name Search mode in MP3 mode.

Folder Name Search mode

2 Turn the Rotary encoder (CDE-9848RB) or press44444 and 33333 (CDE-9846R/CDE-9846RM) within 10seconds to select the desired folder.

3 Press the Rotary encoder (CDE-9848RB) orMODE (CDE-9846R/CDE-9846RM) to play back thefirst file in the selected folder.

• Search mode is cancelled by pressing and holding 3 /PTY for atleast 2 seconds in Folder Name Search mode.

• While in Folder Name Search mode, press 3 /PTY to switch toFile Name Search mode.

• “NO FILE” is displayed for 2 seconds if the folder that is selectedby the Folder Name Search mode contains no files.

• “ROOT” is displayed for a folder that does not have a foldername.

• Folder Name search cannot be made during M.I.X. play.

Continued

Repeat Play

1 Press 4 to play back repeatedly the track beingplayed.The track (file) will be played repeatedly.

Press 4 again and select OFF to deactivate repeatplay.

CD mode:

RPT : Only a track is repeatedly played back

↓

(off)

MP3 mode:

RPT : Only a file is repeatedly played back

↓

RPT : Only files in a folder are repeatedlyplayed back

↓

(off)

M.I.X. (Random Play)

1 Press 5 in the play or pause mode.The tracks (files) on the disc will be played back inrandom sequence.

To cancel M.I.X. play, press 5 again.

CD mode:

↓ M.I.X. : The tracks are played back in

random sequence.

↓(off)

MP3 mode:

↓ M.I.X.: Only files in a folder are played back in

random sequence.↓

M.I.X.: The files are played back in randomsequence.

↓(off)

12-EN

File Name Search mode

2 Press 19/AF or 82/NEWS to select anotherFolder.

3 Select the desired file by turning the Rotaryencoder (CDE-9848RB) or press 44444 and 33333 (CDE-9846R/CDE-9846RM) within 10 seconds.

4 Press the Rotary encoder (CDE-9848RB) orMODE (CDE-9846R/CDE-9846RM) to play back theselected file.

• File Name Search mode is cancelled by pressing and holding3 /PTY for at least 2 seconds.

• While in File Name Search mode, press 3 /PTY to switch toFolder Name Search mode.

• File Name search cannot be made during M.I.X. play.

Quick Search (CDE-9848RB only)You can search for tracks (files).

1 Press and hold 3 /PTY for at least 2 seconds inthe CD/MP3 mode to activate Quick Search mode.

2 Turn the Rotary encoder within 10 seconds toselect a desired track (file).The selected track is played back immediately.

• Search mode is cancelled by pressing and holding 3 /PTY for atleast 2 seconds in Quick Search mode.

About MP3

CAUTIONExcept for private use, duplicating audio data (including MP3data) or distributing, transferring, or copying it, whether forfree or for a fee, without permission of the copyright holder isstrictly prohibited by the Copyright Act and by internationaltreaty.

What is MP3?

MP3, whose official name is “MPEG-1 Audio Layer 3,” is acompression standard prescribed by the ISO, the InternationalStandardization Organization and MPEG which is a jointactivity institution of the IEC.

MP3 files contain compressed audio data. MP3 encoding iscapable of compressing audio data at extremely high ratios,reducing the size of music files to as much as one-tenth theiroriginal size. This is achieved while still maintaining near CDquality. The MP3 format realizes such high compression ratiosby eliminating the sounds that are either inaudible to thehuman ear or masked by other sounds.

Method for creating MP3 files

Audio data is compressed by using MP3 specified software.For details on creating MP3 files, refer to the user's manual forthat software.MP3 files that can be played back by this device have the fileextension “mp3”. Files with no extension cannot be playedback.

Supported playback sampling rates and bit rates

MP3Sampling rates: 48 kHz, 44.1 kHz, 32 kHz, 24 kHz, 22.05 kHz,

16 kHz, 12 kHz, 11.025 kHz, 8 kHzBit rates: 8 - 320 kbps

Note that for sampling rates, this device’s frame display (page15) may not display correctly.This device may not play back correctly depending onsampling rates.

ID3 tags

This device supports ID3 tag v1 and v2.If tag data is in an MP3 file, this device can display the title(track title), artist name, and album name ID3 tag data.

This device can only display single-byte alphanumericcharacters (up to 30 for ID3 tags) and the underscore. Fornon-supported characters, “NO SUPRT” is displayed.The tag information may not be correctly displayed,depending on the contents.

Producing MP3 discs

MP3 files are prepared, then written to a CD-R or CD-RWusing CD-R writing software. A disc can hold up to 510 files/folders (including Root Folders). However, the maximumnumber of folders is 255.

Media supported

The media that this device can play back are CD-ROMs, CD-Rs, and CD-RWs.

Corresponding File Systems

This device supports discs formatted with ISO9660 Level 1 orLevel 2.

Under the ISO9660 standard, there are some restrictions toremember.The maximum nested folder depth is 8 (including the rootdirectory). The number of characters for a folder/file name islimited.Valid characters for folder/file names are letters A-Z (allcaps), numbers 0-9, and ‘_’ (underscore).

This device also can play back discs in Joliet, Romeo, etc.,and other standards that conform to ISO9660. However,sometimes the file names, folder names, etc., are notdisplayed correctly.

Formats supported

This device supports CD-ROM XA, Mixed Mode CD,Enhanced CD (CD-Extra) and Multi-Session.This device cannot correctly play back discs recorded withTrack At Once or packet writing.

13-EN

Order of files

The unit plays the files in the order that the writing softwarewrites them. Therefore, the playing order may not be the sameas the order you input. The playback order of the folders andfiles is as follows. However, the folder and file playback orderdiffers from the folder and file number indicated on thedisplay.

Terminology

Bit rateThis is the “sound” compression rate specified for encoding. The higherthe bit rate, the higher the sound quality, but also the larger the files.

Sampling rateThis value shows how many times per second the data is sampled(recorded). For example, music CDs use a sampling rate of 44.1kHz, so the sound is sampled (recorded) 44,100 times per second.The higher the sampling rate, the higher the sound quality, but alsothe larger the volume of data.

EncodingConverting music CDs, WAVE (AIFF) files, and other sound filesinto the specified audio compression format.

TagSong information such as track titles, artist names, album names,etc., written into MP3 files.MP3: ID3 tag

Root folderThe root folder is found at the top of the file system. The root foldercontains all folders and files.

MP3 FileFolder

Root folder

21

3

4

6

5

2

3

4

5

7

1

6

Sound SettingCDE-9848RB


Adjusting Bass/Treble/Balance (Between Leftand Right)/Fader (Between Front and Rear)/Defeat

1 Press Rotary encoder (MODE) (CDE-9848RB) orMODE (CDE-9846R/CDE-9846RM) repeatedly tochoose the desired mode.

Each press changes the mode as follows:

BASS LV → TRE LV → SUBW*1 → BALANCE → FADER →DEFT → VOLUME → BASS LV

Bass level: -7 ~ +10Treble level: -7 ~ +7Subwoofer : 0 ~ +15Balance : L15 ~ R15Fader : R15 ~ F15Defeat : ON/OFFVolume : 0 ~ 35

• If the Rotary encoder (MODE) or MODE is not pressed within 5seconds after selecting the BASS LV, TRE LV, BALANCE, FADER,DEFT or SUBW mode, the unit automatically returns to normalmode.

CDE-9848RB:• If the Rotary encoder (MODE) is not pressed within 5 seconds

after selecting the BASS LV or TRE LV mode, the unitautomatically returns to normal mode.

CDE-9846R/CDE-9846RM:• If the MODE is not pressed within 15 seconds after selecting the

BASS LV or TRE LV mode, the unit automatically returns to normalmode.

*1 When the subwoofer mode is set to OFF, its level cannot beadjusted.

BAND

Rotary encoder(MODE)

g fCENT. f.

4

3

MODE

g f

BAND

Continued

14-EN

2 Turn the Rotary encoder (MODE) (CDE-9848RB)or press 44444 and 33333 (CDE-9846R/CDE-9846RM) untilthe desired sound is obtained in each mode.By setting Defeat ON, previously adjusted settings ofBASS LV and TRE LV will return to the factory defaults.

Setting the Bass ControlYou can change the bass frequency emphasis to create your own tonalpreference.

1 CDE-9848RB:Press CENT. f. to select the Bass Control mode.

BASS LV → TRE LV → normal mode → BASS LV

CDE-9846R/CDE-9846RM:Press MODE to select the Bass Control mode.

BASS LV → TRE LV → SUBW → BALANCE → FADER → DEFT→ VOLUME → BASS LV

2-1 Setting the bass centre frequency:Press g or f to select the desired bass centrefrequency.

60Hz ↔ 80Hz ↔ 100Hz ↔ 120Hz ↔ 60Hz

The displayed bass frequency is emphasized.

2-2 Setting the bass band width (Q-Factor):Press BAND to select the desired bass bandwidth.

Change the boosted bass band width to wide or narrow. Awide setting will boost a wide range of frequencies aboveand below the centre frequency. A narrower setting willboost only frequencies near the centre frequency.

2-3*2 Setting the bass level:Turn the Rotary encoder (CDE-9848RB) or press44444 and 33333 (CDE-9846R/CDE-9846RM) to select thedesired bass level (-7~+10).You can emphasize or weaken the bass level.

• If no operation is performed within 15 seconds, the bass controlsetting will be turned off automatically.

• The bass level settings will be individually memorized for eachsource (FM, MW (LW), CD, etc.) until the setting is changed. Thebass frequency and bass band width settings adjusted for onesource are effective for all other sources (FM, MW (LW), CD etc.).

• This function is inoperable when DEFT is set to ON.

*2 CDE-9848RB:The adjustment can also be made by pressing the Rotary encoder(MODE). Refer to “Adjusting Bass/Treble/Balance (Between Leftand Right)/Fader (Between Front and Rear)/Defeat” (page 13).

...................................... → 1 → 2 → 3 → 4

(Narrow)← →(Wide)

Setting the Treble ControlYou can change the Treble Frequency emphasis to create your owntonal preference.

1 CDE-9848RB:Press CENT. f. to select the Treble Control mode.

BASS LV → TRE LV → normal mode → BASS LV

CDE-9846R/CDE-9846RM:Press MODE to select the Treble Control mode.

BASS LV → TRE LV → SUBW → BALANCE → FADER → DEFT→ VOLUME → BASS LV

2-1 Setting the treble Centre frequency:Press g or f to select the desired treblecentre frequency.

7.5kHz ↔ 10.0kHz ↔ 12.5kHz ↔ 15.0kHz ↔ 7.5kHz

The displayed Treble frequency is emphasized.

2-2*2 Setting the treble level:Turn the Rotary encoder (CDE-9848RB) or press44444 and 33333 (CDE-9846R/CDE-9846RM) to select thedesired treble level (-7~+7).You can emphasize the treble level.

• If no operation is performed within 15 seconds, the treble controlsetting will be turned off automatically.

• The treble level settings will be individually memorized for eachsource (FM, MW (LW), CD, etc.) until the setting is changed. TheTreble frequency settings adjusted for one source are effective forall other sources (FM, MW (LW), CD, etc.).

• This function is inoperable when DEFT is set to ON.

*2 CDE-9848RB:The adjustment can also be made by pressing the Rotary encoder(MODE). Refer to “Adjusting Bass/Treble/Balance (Between Leftand Right)/Fader (Between Front and Rear)/Defeat” (page 13).

Turning Loudness On/OffLoudness introduces a special low- and high-frequency emphasis atlow listening levels. This compensates for the ear’s decreasedsensitivity to bass and treble sound.

Press and hold Rotary encoder (MODE) (CDE-9848RB) or MODE (CDE-9846R/CDE-9846RM) for atleast 2 seconds to activate or deactivate the loudnessmode.The display shows “LOUD ON” and the “LD” indicator blinkswhen the loudness mode is activated.

15-EN

Other FunctionsCDE-9848RB


Displaying the Title/TextIt is possible to display the CD title if the title has been previouslyinputted (“Titling Discs” page 16). Text information, such as the discname and the track name, will be displayed if playing a CD textcompatible disc. It is also possible to display the folder name, the filename, and the tag, etc., while playing MP3 files.

Press TITLE.The display will change every time the button is pressed.

The display in Radio mode:

PS (Programme Service Name) → Radio Text →FREQUENCY → PS (Programme Service Name)

The display in CD mode:

TRACK NO./ELAPSED TIME → TEXT (DISC NAME)*1 → TEXT(TRACK NAME)*1 → TITLE → TRACK NO./ELAPSED TIME

The display in MP3 mode:

FILE NO./ELAPSED TIME → FOLDER NO./FILE NO. →FOLDER NAME*2 → FILE NAME → ARTIST NAME*3 →ALBUM NAME*3 → TRACK NAME*3 → FRAME*4 → FILE NO./ELAPSED TIME

-/J Rotary encoder

TITLEg f

-/J TITLEg f

4

3

MODE

*1 Displayed during playback of a disc with CD Text.“NO TEXT” will be displayed when the CD contains no Text data.

*2 “ROOT ” is displayed for a folder that does not have a foldername.

*3 ID3 tagIf an MP3 file contains ID3 tag information, the ID3 taginformation is displayed (track name, artist name, and albumname). All other tag data is ignored.“NO DATA” will be displayed when an MP3 file contains no ID3tag information.

*4 The recording sampling rate and bit rate of the MP3 file aredisplayed.

About the indicator displayWhen displaying Title/Text, the following indicators are litaccording to the mode.

About “Title” and “Text”

Title:With this device, it is possible to input the CD name (page 16).This inputted name is referred to as a “title.”You cannot input or display titles on radio station or MP3 discs.

Text:Text compatible CDs contain text information such as the discname and track name. Such text information is referred to as“text.”

• Some characters may not be displayed correctly with this device,depending on the character type.

• When the Scroll Setting (page 17) is set to “MANU,” press andhold TITLE for at least 2 seconds to scroll the Text informationonly once (TEXT DISPLAY, FOLDER NAME DISPLAY, FILENAME DISPLAY or TAG DISPLAY mode).

• “NO SUPRT” is displayed when the desired text informationcannot be displayed on this unit.

• If the title was not previously input, “NO TITLE” is displayed.• The text or tag information may not be correctly displayed,

depending on the contents.

Indicator/Mode CD Mode

While displaying Title

—

—

—

While displaying Text(Disc Name)

While displaying Text(Track Name)

MP3 Mode

—

While displaying FolderName

While displaying FileName

While displaying ArtistName∗

While displaying AlbumName∗

While displaying TrackName∗

∗Tag information

Bass Level Display

16-EN

SETUPYou can flexibly customize the unit to suit your own preferences andusage. From the SETUP menu, choose from Sound Customizing,Visual Customizing, etc., to make your desired settings.

CDE-9848RB


A typical SETUP procedure is shown in steps 1 to 4as follows. See below for further information abouteach SETUP menu.

1 Press and hold FUNC./SETUP for at least 2seconds.SETUP mode is activated.

2 Press g or f to select the desired SETUPmenu.(e.g. Select SUBW)

FM-LV ↔ REG*1 ↔ PISK*2 ↔ DIM*3 ↔ SUBW ↔CD-DA/CDDA/MP3 ↔ TYPE1/TYPE2 ↔ SCR ↔ AUX*3 ↔(AUX NAME)*3/*4 ↔ PWR ↔ FM-LV

*1 Refer to “Receiving RDS Regional (Local) Stations” (page 7)*2 Refer to “PI SEEK Setting” (page 8)*3 CDE-9848RB only*4 Displayed only when AUX is ON

3 Press BAND to change the setting.(e.g. Select SUBW ON or SUBW OFF.)

4 Press FUNC./SETUP again.The display returns to normal mode.

BAND

g f FUNC./SETUP

Rotary encoder

BAND

g f FUNC./SETUP

MODE 4

3

Titling DiscsIt is possible to title your favourite CDs.You cannot input titles on radio station or MP3 discs.

1 Press TITLE and select the Title Display.For details, see “Displaying the Title/Text” (page 15).

2 Press and hold TITLE for at least 2 seconds. Thefirst character will blink.

3 Turn the Rotary encoder (CDE-9848RB) or press44444 and 33333 (CDE-9846R/CDE-9846RM) to select thedesired letter/numeral/symbol available for naming.

4 Press Rotary encoder (CDE-9848RB) or MODE(CDE-9846R/CDE-9846RM) to store the firstcharacter.The first character will stop blinking and the display willautomatically advance to the next character. When thatcharacter begins to blink, you may choose the next letteror symbol of your title.

5 Repeat steps 3 and 4 above to complete the titling.Pressing the Rotary encoder (CDE-9848RB) or MODE(CDE-9846R/CDE-9846RM) after entering the 8thcharacter automatically stores the title into memory.

When entering a title of less than 8 characters (forexample, 3 character title):After entering 3 characters, the 4th character space willbe blinking. Go to step 6 to complete the title.

6 Press TITLE to record the title.

• If you cancel while entering a title, selected characters are notwritten.

• You can enter 18 CD titles on this unit. If you try to store beyondthe limit, the display will show “FULL DATA.” At this point, nomore titles can be stored. To input a new title, one of the previouslyinputted titles must first be deleted.

• When you want to erase a title, enter the “ ” symbol into allspaces.

• The operations described in steps 3 to 5 must be made within 10seconds. The input mode will be cancelled if no action is taken forover 10 seconds.

Erasing Disc Title

1 Press TITLE to select the Title Display. Then, pressagain and hold for at least 2 seconds.

2 Press and hold -/J for at least 2 seconds.The title in the display will blink.

3 Press g or f repeatedly until the title youwant to erase is displayed.

4 Press and hold -/J for at least 2 seconds to erasethe title displayed.

5 Press TITLE to cancel the title erasing mode.

• You cannot erase CD-TEXT.• “NO DATA” is displayed for 2 seconds if the title is not input in

step 2, or if the title is erased in step 4.

17-EN

Sound Customizing

Adjusting Source Signal LevelsFM-LV HI (Initial setting) / FM-LV LO

If the difference in volume level between the CD player and FM radiois too great, adjust the FM signal level.

Subwoofer On and OffSUBW ON (Initial setting) / SUBW OFF

When the subwoofer is on, perform the steps below to adjust thesubwoofer output level.

1 Press the Rotary encoder (CDE-9848RB) or MODE(CDE-9846R/CDE-9846RM) repeatedly to select theSUBW mode.

BASS LV → TRE LV → SUBW* → BALANCE → FADER →DEFT → VOLUME → BASS LV

2 To adjust the level, turn the Rotary encoder (CDE-9848RB) or press 4 and 3 (CDE-9846R/CDE-9846RM).

* When the subwoofer mode is set to OFF, its level cannot beadjusted.

Visual Customizing

Dimmer Control (CDE-9848RB only)DIM AUTO (Initial setting) / DIM MANU

Set the DIM control to AUTO to decrease the illumination brightnessof the unit with the head lights of the vehicle ON. This mode is usefulif you feel the unit's button lighting is too bright at night.

• If your vehicle should have a dimmer control for thedashboardlights, never connect the DIMMER cable (orange) of theradio to this dimmer control.

Scroll SettingSCR AUTO / SCR MANU (Initial setting)

This CD player can scroll the disc and track names recorded on CD-TEXT discs, as well as the text information of MP3 files, foldernames, and tags.

SCR AUTO : The CD text information, the text information offolder and file names, and the tags are scrolledautomatically.

SCR MANU : The display is scrolled only when a disc isloaded or when a track is changed, etc.

• The unit scrolls CD text names, folder names, file names or tagdisplay. The disc titles input manually (page 16) cannot be scrolled.

Scroll Type SettingTYPE1 (Initial setting) / TYPE2

Choose from two scrolling methods.Select the type you prefer.

TYPE1 : The characters scroll sequentially, appearing fromthe right side of the display.

TYPE2 : The characters are displayed one by one, anddisappear one by one from the left side of thedisplay after the screen is filled up with thecharacters.

External Device

Setting the AUX Mode (CDE-9848RB only)AUX ON / AUX OFF (Initial setting)

You can input the audio of a connected external device (such as aportable player) to the AUX input terminal of this unit, using acommercially-available RCA cable.You can change the AUX name display when AUX ON is set. Selectthe AUX name by pressing g or f.

Connecting to an External AmplifierPWR ON (Initial setting) / PWR OFF

When an external amplifier is connected, sound quality can beimproved by stopping the power supply of the built-in amplifier.

PWR OFF : Use this mode when the front pre-amplifier of theunit is used to drive an external amplifierconnected to the speakers. In this setting, thehead unit’s internal amplifier has no output todrive speakers.

PWR ON : The speakers are driven by the built-in amplifier.

• No sound is produced by the system when the power output is set toOFF.

Amplifier

Frontleft

Frontright

SPEAKERRIGHT FRONT

SPEAKERRIGHT REAR

SPEAKERLEFT REAR

SPEAKERLEFT FRONT

Speakers

Frontleft

Frontright

Rearleft

Rearright

MP3

Playing MP3 DataCD-DA (Initial setting) / CDDA/MP3

This product can playback CDs containing both CD and MP3 data.However, in some situations (some enhanced CDs), playback may bedifficult. For these special cases, you can select playback of CD dataonly. When a disc contains both CD or the MP3 data, playback startsfrom the CD data portion of the disc.

CD-DA : Only CD data can be played back.CDDA/MP3 : Both CD data and MP3 file tracks can be

played back.• Perform this setting before inserting a disc. If a disc has already

been inserted, perform the setting after you remove the disc.

18-EN

CD

CD Player not functioning.• Out of operating temperature range +50˚C (+120˚F) for CD.

- Allow the vehicle's interior (or trunk) temperature to cool.

CD playback sound is wavering.• Moisture condensation in the CD Module.

- Allow enough time for the condensation to evaporate (about1 hour).

CD insertion not possible.• A CD is already in the CD player.

- Eject the CD and remove it.• The CD is being improperly inserted.

- Make sure the CD is being inserted following instructions inthe CD Player Operation section.

Unable to fast forward or backward the CD.• The CD has been damaged.

- Eject the CD and discard it; using a damaged CD in your unitcan cause damage to the mechanism.

CD playback sound skips due to vibration.• Improper mounting of the unit.

- Securely re-mount the unit.• The disc is very dirty.

- Clean the disc.• The disc has scratches.

- Change the disc.• The pick-up lens is dirty.

- Do not use a commercial available lens cleaner disc. Consultyour nearest Alpine dealer.

CD playback sound skips without vibration.• The disc is dirty or scratched.

- Clean the disc; damaged disc should be replaced.

Error displays (built-in CD player only)• Mechanical error

- Press c. After the error indication disappears, insert the discagain. If the above-mentioned solution does not solve theproblem, consult your nearest Alpine dealer.

CD-R/CD-RW playback not possible• Close session (finalization) has not been performed.

- Perform finalization and attempt playback again.

MP3

MP3 is not played back.• Writing error occurred. The CD format is not compatible.

- Make sure the CD has been written in a supported format.Refer to “About MP3” (pages 12-13), then rewrite in theformat supported by this device.

Audio

The sound is not output from the speakers.• Unit has no output signal of the internal amplifier.

- PWR is switched to “ON” (page 17).

InformationIn Case of DifficultyIf you encounter a problem, please turn the power off, then on again.If the unit is still not functioning normally, please review the items inthe following checklist. This guide will help you isolate the problemif the unit is at fault. Otherwise, make sure the rest of your system isproperly connected or consult your authorized Alpine dealer.

Basic

No function or display.• Vehicle's ignition is off.

- If connected following instructions, the unit will notoperate with the vehicle's ignition off.

• Improper power lead (Red) and battery lead (Yellow)connections.- Check power lead and battery lead connections.

• Blown fuse.- Check the fuse of the unit; replace with the proper value if

necessary.• Internal micro-computer malfunctioned due to interference

noise etc.- Press the RESET switch with a ballpoint pen or other

pointed article.

Radio

Unable to receive stations.• No antenna or open connection in cable.

- Make sure the antenna is properly connected;replace the antenna or cable if necessary.

Unable to tune stations in the seek mode.• You are in a weak signal area.

- Make sure the tuner is in the DX mode.• If the area you are in is a primary signal area, the antenna may

not be grounded and connected properly.- Check your antenna connections; make sure the antenna is

properly grounded at its mounting location.• The antenna may not be the proper length.

- Make sure the antenna is fully extended; if broken, replacethe antenna with a new one.

Broadcast is noisy.• The antenna is not the proper length.

- Extend the antenna fully; replace it if it is broken.• The antenna is poorly grounded.

- Make sure the antenna is grounded properly at its mountinglocation.

19-EN

Indication for CD Player

HI TEMP• Protective circuit is activated due to high temperature.

- The indicator will disappear when the temperaturereturns to normal operating range.

NO DISC• No CD is inserted.

- Insert a CD.• Although a disc is inserted, “NO DISC” is displayed and the

unit does not start to play or eject the disc.- Remove the disc by following these steps:

Press the c button again for at least 2 seconds.If the disc still does not eject, consult your Alpine dealer.

ERROR• Mechanism error.

1) Press the c button and eject the CD.If not ejecting, consult your Alpine dealer.

2) When the error indication remains after ejecting, press thec button again.If the error indication still does not turn off after pressingthe c button for a few times, consult your Alpine dealer.

• When “ERROR” is displayed:If that the disc cannot be ejected by pressing c, press theRESET switch (refer to page 5) and press c again.If the disc still cannot be ejected, consult your Alpine dealer.

• A disc that is not compatible with the unit is inserted.- Insert a disc that is compatible with the unit.

UNSUPORT• The disc is not written in a MP3 supported format.

- Use a disc written at the MP3 supported format.

SpecificationsFM TUNER SECTION

Tuning Range 87.5 – 108.0 MHzMono Usable Sensitivity 0.7 µVAlternate Channel Selectivity 80 dBSignal-to-Noise Ratio 65 dBStereo Separation 35 dBCapture Ratio 2.0 dB

MW TUNER SECTIONTuning Range 531 – 1,602 kHzSensitivity (IEC Standard) 25.1 µV/28 dB

LW TUNER SECTIONTuning Range 153 – 281 kHzSensitivity (IEC Standard) 31.6 µV/30 dB

CD SECTIONFrequency Response 5 – 20,000 Hz (±1 dB)Wow & Flutter (% WRMS) Below measurable limitsTotal Harmonic Distortion 0.008% (at 1 kHz)Dynamic Range 95 dB (at 1 kHz)Signal-to-Noise Ratio 105 dBChannel Separation 85 dB (at 1 kHz)

PICKUPWave length 795 nmLaser power CLASS I

GENERALPower Requirement 14.4 V DC

(11–16 V allowable)Maximum Power Output 45 W × 4Maximum Pre-Output Voltage 2 V/10k ohmsBass +20/-14 dB at 60 HzTreble ±14 dB at 10 kHzWeight 1.6 kg (3 lbs. 8 oz)

CHASSIS SIZEWidth 178 mm (7")Height 50 mm (2")Depth 160 mm (6-1/4")

NOSEPIECE SIZEWidth 170 mm (6-3/4")Height 46 mm (1-13/16")Depth 18 mm (11/16")

• Due to continuous product improvement, specifications and designare subject to change without notice.

CAUTION

(Bottom side of player)

CLASS 1LASER PRODUCT

20-EN

Before installing or connecting the unit, please read thefollowing and pages 2 to 4 of this manual thoroughlyfor proper use.

WarningMAKE THE CORRECT CONNECTIONS.Failure to make the proper connections may result in fire orproduct damage.

USE ONLY IN CARS WITH A 12 VOLT NEGATIVE GROUND.(Check with your dealer if you are not sure.) Failure to do so mayresult in fire, etc.

BEFORE WIRING, DISCONNECT THE CABLE FROM THENEGATIVE BATTERY TERMINAL.Failure to do so may result in electric shock or injury due toelectrical shorts.

DO NOT SPLICE INTO ELECTRICAL CABLES.Never cut away cable insulation to supply power to otherequipment. Doing so will exceed the current carrying capacity ofthe wire and result in fire or electric shock.

DO NOT DAMAGE PIPE OR WIRING WHEN DRILLINGHOLES.When drilling holes in the chassis for installation, takeprecautions so as not to contact, damage or obstruct pipes, fuellines, tanks or electrical wiring. Failure to take such precautionsmay result in fire.

DO NOT USE BOLTS OR NUTS IN THE BRAKE ORSTEERING SYSTEMS TO MAKE GROUND CONNECTIONS.Bolts or nuts used for the brake or steering systems (or any othersafety-related system), or tanks should NEVER be used forinstallations or ground connections. Using such parts coulddisable control of the vehicle and cause fire etc.

KEEP SMALL OBJECTS SUCH AS BATTERIES OUT OF THEREACH OF CHILDREN.Swallowing them may result in serious injury.If swallowed, consult a physician immediately.

DO NOT INSTALL IN LOCATIONS WHICH MIGHT HINDERVEHICLE OPERATION, SUCH AS THE STEERING WHEELOR GEARSHIFT.Doing so may obstruct forward vision or hamper movement etc.and results in serious accident.

CautionHAVE THE WIRING AND INSTALLATION DONE BYEXPERTS.The wiring and installation of this unit requires special technicalskill and experience. To ensure safety, always contact the dealerwhere you purchased this product to have the work done.

USE SPECIFIED ACCESSORY PARTS AND INSTALL THEMSECURELY.Be sure to use only the specified accessory parts. Use of otherthan designated parts may damage this unit internally or may notsecurely install the unit in place. This may cause parts to becomeloose resulting in hazards or product failure.

ARRANGE THE WIRING SO IT IS NOT CRIMPED ORPINCHED BY A SHARP METAL EDGE.Route the cables and wiring away from moving parts (like theseat rails) or sharp or pointed edges. This will prevent crimpingand damage to the wiring. If wiring passes through a hole inmetal, use a rubber grommet to prevent the wire’s insulation frombeing cut by the metal edge of the hole.

DO NOT INSTALL IN LOCATIONS WITH HIGH MOISTUREOR DUST.Avoid installing the unit in locations with high incidence ofmoisture or dust. Moisture or dust that penetrates into this unitmay result in product failure.

Precautions• Be sure to disconnect the cable from the (–) battery post before

installing your CDE-9848RB/CDE-9846R/CDE-9846RM.This will reduce any chance of damage to the unit in case of ashort-circuit.

• Be sure to connect the colour coded leads according to thediagram. Incorrect connections may cause the unit tomalfunction or damage to the vehicle's electrical system.

• When making connections to the vehicle's electrical system, beaware of the factory installed components (e.g. on-boardcomputer). Do not tap into these leads to provide power forthis unit. When connecting the CDE-9848RB/CDE-9846R/CDE-9846RM to the fuse box, make sure the fuse for theintended circuit of the CDE-9848RB/CDE-9846R/CDE-9846RM has the appropriate amperage. Failure to do so mayresult in damage to the unit and/or the vehicle. When in doubt,consult your Alpine dealer.

• The CDE-9848RB/CDE-9846R/CDE-9846RM uses femaleRCA-type jacks for connection to other units (e.g. amplifier)having RCA connectors. You may need an adaptor to connectother units. If so, please contact your authorized Alpine dealerfor assistance.

• Be sure to connect the speaker (–) leads to the speaker (–)terminal. Never connect left and right channel speaker cablesto each other or to the vehicle body.

IMPORTANTPlease record the serial number of your unit in the space providedbelow and keep it as a permanent record. The serial number or theengraved serial number is located on the bottom of the unit.

SERIAL NUMBER:INSTALLATION DATE:INSTALLATION TECHNICIAN:PLACE OF PURCHASE:

Installation and Connections

21-EN

Installation

1

Slide mounting sleeve from main unit (see“Removal” on this page). Slide the mounting sleeveinto the dashboard and fix it with the metalshackles.

2

When your vehicle has the Bracket, mount the longhex bolt onto the rear panel of the CDE-9848RB/CDE-9846R/CDE-9846RM and put the Rubber Capon the hex bolt. If your vehicle does not have theMounting Support, reinforce the head unit with themetal mounting strap (not supplied). Connect allthe leads of the CDE-9848RB/CDE-9846R/CDE-9846RM according to details described in theCONNECTION section.

• For the screw *, provide a proper screw to the chassis installinglocation.

3 Slide the CDE-9848RB/CDE-9846R/CDE-9846RMinto the dashboard. When the unit is in place, makesure the locking pins are fully seated in the downposition. This can be done by pressing firmly in onthe unit while pushing the locking pin down with asmall screwdriver. This ensures that the unit isproperly locked and will not accidentally come outfrom the dashboard. Install the Detachable FrontPanel.

Removal

1 Remove the detachable front panel.

2 Use a small screwdriver (or similar tool) to push thelocking pins to the “up” position (see above drawing).As each pin is unlocked, gently pull out on the unit tomake sure it does not re-lock before unlocking thesecond pin.

3 Pull the unit out, keeping it unlocked as you do so.

<JAPANESE CAR>

Front frame

Screws (M5 × 8)(Included)

Mounting Bracket

this unit

Metal Mounting Strap

Screw

Bolt Stud

Hex Nut (M5)

this unit

Accessory List

• Head unit ........................................................................ 1• Power cable .................................................................... 1• Mounting sleeve ............................................................. 1• Carrying case ................................................................. 1• Rubber Cap .................................................................... 1• Hex Bolt .......................................................................... 1• Screw (M5 × 8) ................................................................ 4• Owner’s Manual ....................................................... 1 set

Note:The main unit must be mounted within 35 degrees of the horizontalplane, back to front.

Less than 35°

Lock pin

Dashboard

Rubber Cap(Included)

Bracket

Mounting sleeve(Included)

Hex Bolt(Included)

this unit

∗

22-EN

7

1:

2

6

5

3

8

9

!

(

)

~

+

&

%

. ,

-

" #

$

/

/;

4

Connections

Front or Subwoofers

To amplifier or equalizer

Ignition Key

To vehicle phone

Amplifier

To the instrument cluster illumination lead

Battery

Rear Left

Front Left

Rear Right

Speakers

Front Right

(Pink/Black) AUDIO INTERRUPT IN

(Blue/White) REMOTE TURN-ON

(Green)

(Green/Black)

(White)

(White/Black)

(Grey/Black)

(Grey)

(Violet/Black)

(Violet)

Antenna

ISO Antenna Plug

(Yellow) BATTERY

(Blue) POWER ANT

(Black) GND

(Red) IGNITION

(CDE-9848RB only)

(Orange) DIMMER

To power antenna

JASO Antenna Plug

External Device

(Such as a portable player)

23-EN

To prevent external noise from entering the audio system.• Locate the unit and route the leads at least 10 cm away from the car harness.• Keep the battery power leads as far away from other leads as possible.• Connect the ground lead securely to a bare metal spot (remove any paint, dirt or grease if necessary) of the car chassis.• If you add an optional noise suppressor, connect it as far away from the unit as possible. Your Alpine dealer carries various noise

suppressors, contact them for further information.• Your Alpine dealer knows best about noise prevention measures so consult your dealer for further information.

1 Antenna Receptacle

2 Audio Interrupt In Lead (Pink/Black)Connect this lead to the Audio Interface output of a cellularphone which provides ground shorting when a call isreceived.

3 Remote Turn-On Lead (Blue/White)Connect this lead to the remote turn-on lead of youramplifier or signal processor.

4 Dimmer Lead (Orange) (CDE-9848RB only)This lead may be connected to the vehicle’s instrumentcluster illumination lead. This will enable the vehicle’sdimmer control to dim the backlighting of the unit.

5 Switched Power Lead (Ignition) (Red)Connect this lead to an open terminal on the vehicle’s fusebox or another unused power source which provides (+) 12Vonly when the ignition is turned on or in the accessoryposition.

6 Ground Lead (Black)Connect this lead to a good chassis ground on the vehicle.Make sure the connection is made to bare metal and issecurely fastened using the sheet metal screw provided.

7 Power Antenna Lead (Blue)Connect this lead to the +B terminal of your power antenna,if applicable.

• This lead should be used only for controlling the vehicle's powerantenna. Do not use this lead to turn on an amplifier or a signalprocessor, etc.

8 Battery Lead (Yellow)Connect this lead to the positive (+) post of the vehicle’sbattery.

9 ISO Power Supply Connector

! Fuse Holder (10A)

" Steering Remote Control Interface ConnectorTo steering remote control interface box.

# Front/Subwoofer* Output RCA Connectors

* When Subwoofer is set to OFF: Output is from front speakers.When Subwoofer is set to ON: Output is from Subwoofer.

$ Power Supply Connector

% Left Rear (+) Speaker Output Lead (Green)

& Left Rear (–) Speaker Output Lead (Green/Black)

( Left Front (+) Speaker Output Lead (White)

) Left Front (–) Speaker Output Lead (White/Black)

~ Right Front (–) Speaker Output Lead (Grey/Black)

+ Right Front (+) Speaker Output Lead (Grey)

, Right Rear (–) Speaker Output Lead (Violet/Black)

- Right Rear (+) Speaker Output Lead (Violet)

. ISO Connector (Speaker Output)

/ RCA Extension Cable (sold separately)

: ISO/JASO Antenna Adapter (sold separately)An ISO/JASO antenna adapter may be required, dependingon the vehicle.

; AUX Input RCA Connector (CDE-9848RB only)This connector allows for input of audio from an externaldevice (such as a portable player), using a commerciallyavailable RCA cable.

Product Information Card

EnglishFilling in this Product Information Card isvoluntary. If you fill in this card and sendit to Alpine, your data will be tabulatedinto reference data for future Alpineproduct development. In addition, in thefuture you may receive information aboutnew products or Survey Mail requestingadditional opinions about Alpine productsor services. If you agree to the aboveterm, please sign your name in theindicated space and return the card. Anyadditional comments or inquiries may besent to : Person in charge of CustomerService department Alpine Electronics(Europe) GmbH.Frankfurter Ring 117, 80807 München, GermanyPhone: +49-(0)89-32 42 640

Q1. PRODUCT PURCHASED1. Cassette Player2. CD Player3. MD Player4. DVD Player5. CD Changer6. Amplifier7. Speaker8. Subwoofer9. Monitor Controller

10. Video Monitor11. Navigation12. Processor/Equalizer13. CD/Video CD Changer14. Other

Q2. MODEL NUMBER:Q3. DATE OF PURCHASE:

Month: Year:Q4. If navigation system, which

monitor?1. Alpine → (Model No.)2. Other → (Brand Name)

Q5. STORE TYPE WHEREPURCHASED:

1. Car Audio Specialist2. Audio/Video Store3. Electronics/Appliance Store4. Car Accessories Shop5. Other

Q6. Type of vehicle in which this unit isinstalled:Make: Model:Purchased ModelYear: Year:

Q7. How was this vehicle purchased?1. Purchase2. Lease

Q8. Purpose of buying this unit?1. Addition2. Replacement↓• Previous brand replaced?1. Factory installed2. Alpine3. Other → (Brand Name)

Q9. Have you purchased Alpineproducts before?

1. First time2. Two or More times

Q10.When you purchased this Alpineunit, did you compare it with otherbrand?

1. Yes → (Brand Name)2. No.

Q11.GENDER1. Male2. Female

Q12.AGEQ13.MARITAL STATUS

1. Single2. Married

Q14.OCCUPATION1. Company Owner/Self-employed/

Freelance2. Manager3. Company Employee4. Civil Servant5. Educator6. Student7. Other

Q15.Comments

Produkt-Informationskarte

DeutschDas Ausfüllen dieser Produktinformations-Karteist freiwillig. Sollten Sie diese Kartevervollständigen, so werden die Daten fürzukünftige Produktentwicklungen von Alpine alsReferenzdaten herangezogen. Ebenso können Siein der Zukunft Informationen über neue AlpineProdukte erhalten oder uns auch Ihre Meinungüber Alpine Produkte und Dienstleistungen imRahmen von Kunden-Befragungen mitteilen.Stimmen Sie dem Kontakt durch Alpine zu, sowürden wir Sie bitten, in dem dafür vorgesehenenFeld zu unterschreiben und die Karte kostenfreian uns zurückzuschicken. ZusätzlicheKommentare und Meinungen können Sie gernean den zuständigen Kontakt im KundendienstAlpine Electronics (Europe) GmbH senden.Frankfurter Ring 117, 80807 München, GermanyPhone: 089-32 42 640

Q1. gekauftes Gerät1. Kassetten-Spieler2. CD-Spieler3. MD-Spieler4. DVD-Spieler5. CD-Wechsler6. Verstärker7. Lautsprecher8. Subwoofer9. Monitor-Controller

10. Video-Monitor11. Navigationssystem12. Prozessor/Equalizer13. CD/Video-CD-Wechsler14. andere

Q2. Modellnummer:Q3. Kaufdatum:

Monat: Jahr:Q4. Falls Navigationssystem:

Welcher Monitor?1. Alpine → (Modellnr.)2. Anderer Hersteller →

(Herstellername)Q5. Art des Geschäfts, in dem Sie das

Gerät gekauft haben:1. Spezialist für Auto-Audioanlagen2. Audio/Video-Geschäft3. Elektro-Geschäft4. Autozubehör-Geschäft5. Anderer Hersteller

Q6. Art des Fahrzeugs, in das dasGerät installiert wurde:Marke: Modell:gekauft imJahr: Baujahr:

Q7. Wie haben Sie das Fahrzeuggekauft?

1. Kauf2. Leasing

Q8. Zweck des Kaufs dieses Geräts?1. Zusätzlich2. Austausch↓• Marke des ausgetauschten Geräts?1. Serienmäßige Ausstattung2. Alpine3. Anderer Hersteller →

(Herstellername)Q9. War dies das erste Mal, dass Sie

ein Alpine-Gerät gekauft haben?1. Erstes Mal2. Zweites Mal oder öfter

Q10.Haben Sie dieses Alpine-Gerät vordem Kauf mit Geräten andererHersteller verglichen?

1. Ja → (Herstellername)2. Nein

Q11.Geschlecht1. Männlich2. Weiblich

Q12.AlterQ13.Familienstand

1. Ledig2. Verheiratet

Q14.Beruf1. Selbständige/Firmeninhaber/freiberuflich

Tätige2. Leitende Angestellte3. Sonstige Angestellte4. Beamte5. Schulbildung6. Studium7. Sonstige

Q15.Kommentar:

Carte d’informations surle produit

FrançaisEn remplissant volontairement cette fiche,et en l’envoyant à Alpine, vous acceptezque ces informations soient utilisées parAlpine, dans le cadre de développementde nouveaux produits. Par ailleurs, vousautorisez Alpine à solliciter votre opinionpar mailing sur de nouveaux produits ouservices. Si vous acceptez les termes ci-dessus, veuillez signer cette carte àl’endroit indiqué, et nous la retourner.Tout autre commentaire ou demande doitêtre adressé à l’attention de: Responsabledu service consommateur AlpineElectronics (Europe) GmbH.Frankfurter Ring 117, 80807 München, GermanyPhone: +49-(0)89-32 42 640

Q1. PRODUIT ACHETE1. Lecteur de cassette2. Lecteur de CD3. Lecteur MD4. Lecteur DVD5. Changeur de CD6. Amplificateur7. Haut-parleur8. Haut-parleur de graves9. Station Multimedia

10. Moniteur Vidéo11. Navigation12. Processeur/Egaliseur13. Changeur de CD/CD Vidéo14. Autre

Q2. NUMERO DU MODELE:Q3. DATE D’ACHAT:

Mois: Année:Q4. Si c’est un système de navigation,

quel moniteur?1. Alpine → (N° du modèle)2. Autre → (Marque)

Q5. TYPE DE MAGASIN OU VOUSAVEZ ACHETE LE PRODUIT:

1. Spécialiste autoradio2. Magasin audio/vidéo3. Magasin d’électronique/appareils4. Magasin d’accessoires automobiles5. Autre

Q6. Type de véhicule dans lequel cetappareil est installé:Marque: Modèle:Année Année dud’achat: modèle:

Q7. Comment avez-vous acheté cevéhicule?

1. Achat2. Location-bail

Q8. Pourquoi avez-vous acheté cetappareil?

1. Addition2. Remplacement↓• Marque précédente remplacée?1. Installée en usine2. Alpine3. Autre → (Marque)

Q9. Aviez-vous déjà acheté desproduits Alpine?

1. Première fois2. Deux fois ou plus

Q10.Lorsque vous avez acheté ceproduit Alpine, l’avez-vouscomparé à une autre marque?

1. Oui → (Marque)2. Non

Q11.SEXE1. Masculin2. Féminin

Q12.AGEQ13.SITUATION DE FAMILLE

1. Célibataire2. Marié

Q14.PROFESSION1. Entrepreneur/Travailleur indépendant/

Free-lance2. Directeur3. Employé de bureau4. Fonctionnaire5. Educateur6. Etudiant7. Autre

Q15.Commentaires

Tarjeta de información delproducto

EspañolEl envío de la información solicitada esvoluntario. Si Vd. nos la remite, seráutilizada de modo confidencial para eldesarrollo de futuros productos Alpine. SiVd. desea recibir información sobrenuevos productos de nuestra gama,indique su nombre en el espaciodesignado y remítanos la tarjeta.Cualquier solicitud adicional puede serenviada a : Persona responsable delServicio de Atención al Cliente de AlpineElectronics (Europe) GmbH.Frankfurter Ring 117, 80807 München, GermanyPhone: +49-(0)89-32 42 640

Q1. Producto Comprado1. Radio/Cassette2. Radio/CD3. Reproductor de MD4. Reproductor de DVD5. Cambiador de CD6. Amplificador7. Altavoz8. Subwoofer9. Monitor de control

10. Monitor de video11. Sistema de navegación12. Procesador/Ecualizador13. Cambiador de CD/Video CD14. Otros

Q2. Número de modelo:Q3. Fecha de compra:

Mes: Año:Q4. En caso de sistema de

navegación, ¿qué monitor?1. Alpine → (N° de modelo)2. Otros → (Nombre de marca)

Q5. TIPO DE TIENDA DONDECOMPRÓ:

1. Especialista en audio de automóviles2. Tienda de audio/video3. Tienda de electrónica/electrodomésticos4. Tienda de accesorios automovilísticos5. Otros

Q6. Tipo de vehiculo en que la unidadestá instalada:Marca: Modelo:Año de Año delcompra: modelo:

Q7. ¿Cómo fue comprado estevehiculo?

1. compra2. Leasing

Q8. ¿Propósito de comprar estaunidad?

1. Mejora del sistema2. Sustitución↓• ¿Sustitución de marca anterior?1. Instalado en la fábrica2. Alpine3. Otros → (Nombre de marca)

Q9. ¿Ha comprado Vd. productosAlpine anteriormente?

1. Primera vez2. Dos o más veces

Q10.Cuando usted compró esta unidadAlpine, ¿la comparó con otrosfabricantes?

1. Si → (Nombre de marca)2. No

Q11.SEXO1. Masculino2. Femenino

Q12.EdadQ13.Estado civil

1. Soltero2. Casado

Q14.Ocupación1. Propietario de empresa/Autónomo/

Profesional independiente2. Gerente3. Empleado de compañia4. Empleado público5. Profesor6. Estudiante7. Otros

Q15.Comentarios

Appendix

Scheda informazioniprodotto

ItalianoLa compilazione di questa formulario èvolontaria. Se compilate questo formulario,ritornandolo ad Alpine, i Vostri dati sarannoraccolti in un file di riferimento per lo sviluppodei nuovi prodotti Alpine. In aggiunta Voi potretericevere in futuro informazioni riguardanti i nuoviprodotti o la richiesta di una Vostra opinionecirca i prodotti o i servizi forniti da Alpine. Sesiete d’accordo, Vi preghiamo di ritornarci ilformulario completato negli appositi spazi con iVostri dati. In caso desideriate fornire altricommenti o richiedere informazioni aggiuntive,potete indirizzare il tutto a : Responsabiledipartimento Servizio Clienti Alpine Electronics(Europe) GmbH.Frankfurter Ring 117, 80807 München, GermanyPhone: +49-(0)89-32 42 640

Q1. PRODOTTO ACQUISTATO1. Lettore di cassette2. Lettore CD3. Lettore MD4. Lettore DVD5. CD Changer6. Amplificatore7. Altoparlante8. Subwoofer9. Radio Monitor

10. Monitor video11. Sistema di navigazione12. Processore/equalizzatore13. Cambia CD/Video CD14. Altro

Q2. NUMERO MODELLO:Q3. DATA DI ACQUISTO:

Mese: Anno:Q4. In caso di acquisto di un sistema di

navigazione, quale monitorpossiede?

1. Alpine → (No. Modello)2. Altro → Nome marca

Q5. NEGOZIO DI ACQUISTO:1. Specialista Car Stereo2. Negozio di audio/video3. Negozio di elettronica/elettrodomestici4. Negozio accessori automobile5. Altro

Q6. Tipo di veicolo posseduto:Marca: Modello:Anno Annoacquisto: modello:

Q7. Modalità acquisto1. Acquisto2. Leasing

Q8. Scopo acquisto1. Aggiunta2. Sostituzione↓• Marca sostituita1. Installato di fabbrica2. Alpine3. Altro → (Nome marca)

Q9. Avevate già acquistato prodottiAlpine?

1. No2. Due o tre volte

Q10.Nell’acquistarlo, avete paragonatoquesto prodotto ad un’altra marca?

1. Si → (Nome marca)2. No

Q11.SESSO1. Maschile2. Femminile

Q12.ETÀQ13.STATO CIVILE

1. Celibe/nubile2. Coniugato/coniugata

Q14.LAVORO1. Proprietario di azienda/artigiano/libero

professionista2. Manager3. Impiegato4. Impiegato statale5. Insegnante6. Studente7. Altro

Q15.Commenti

I agree to the above stated terms of the Alpine Product Information Card.Ich stimme dem Kontakt durch Alpine für Informations- und Befragungszwecke zu.J’accepte les termes de cette carte d’information produit Alpine.Estoy conforme con los términos de la tarjeta de información sobre producto de Alpine.Accetto i termini della scheda informazioni prodotti Alpine.

(Signature/Unterschrift/Signature/Firma)

(Date/Datum/Date/Fecha/Data)

Name/Nom/Nombre/Nome

(First Name/Vorname/Prénom/Primer nomble/Nome)

(Surname/Familienname/Nom de famille/Apellido/Cognome)

Home Address/Privatanschrift/Adresse/Dirección/Indirizzo

Telephone Number:

(Street/Straße/Rue/Calle/Via) (Post Code/Postleitzahl/Code postal/Código postal/Codice postale)

(Town/City/Stadt/Ville/Ciudad/Città) (Country/Land/Pays/País/Paese)

E-Mail/Correo electrónico:

Q1 NO.Other

Q9 NO.

Q15 Comments

Q2

Q5 NO.Other

Month YearQ3

Q6 Make:

Purchased Year: ModelYear:

Model:

NO.1. Model No.

NO.2. Brand NameQ4

NO.Q7 NO. Previous brand replaced. Brand Name

2 1. 2. 3.1Q8

NO.

Brand Name

2

1Q10NO.

Q11

Q13NO.

years oldQ12 NO.

OtherQ14

RDS MP3 CD Receiver CDE-9848RB/CDE-9846R/ DE CDE-9846RM€¦ · CDE-9848RB/CDE-9846R/ CDE-9846RM...

Documents

Transcript of RDS MP3 CD Receiver CDE-9848RB/CDE-9846R/ DE CDE-9846RM€¦ · CDE-9848RB/CDE-9846R/ CDE-9846RM...