Ranger™ Compact Mobile Equipment

Ease-of-transportThe compact J20 can be easily transported via shipping container.

Heavy-duty JawThe heavy-duty jaw crusher works exceptionally well in recycling and hard rock applications.

Hydraulic Jaw DriveThe hydraulic drive ensures a smooth start up and shut down and allows for easy reversal in the event of a blockage.

Hydraulic Jaw AdjustmentThe crusher’s closed side setting is easily adjusted with the hydraulic wedge and tension rod set up.

Jaw Level SensorOperators can maximize throughput by maintaining a constant feed rate with the jaw level sensors.

Conveyor Rotation SensorIn the event that the under crusher conveyor stalls, the unit will shut down the crushing process, minimizing the backup of material under the crushing chamber.

Feed HopperThe feed hopper sides are designed for quick locking from the ground level.

Overband MagnetThe standard overband magnet removes metal from the operation.

Hydraulically-folding, Under-crusher ConveyorThe under-crusher conveyor has a large stockpile height of nearly ten feet.

Power Pack DoorsThe wing-style power pack doors provide easy maintenance access around the engine and hydraulic components.

Ranger™ J20 Compact Jaw CrusherThe Ranger™ J20 mobile jaw crusher is an easy-to-use, compact jaw plant designed to crush a wide variety of

materials. Designed with contractors’ needs in mind, the Ranger™ J20 plant can be folded to a transport length of

under thirty-two feet and features a larger feed hopper and low feeding height.

Transport Operation

Standard Metric Standard Metric

Width 8’ 4” 2.5m 9’ 2.7m

Length 31’ 7” 9.6m 39’ 10” 12.1m

Height 9’ 8” 2.9m 10’ 9” 3.3m

Weight 50,600lb* 23,000kg* 50,600lb* 23,000kg*

Gap 20” x 34” 508 x 864mm 20” x 34” 508 x 864mm

*Standard

Ease-of-transportThe compact I32 can be easily transported via shipping container.

Rotor ConfigurationsThe four-bar rotor can operate with all four bars up, or two up and two down.

Direct Drive ClutchThe efficient, direct clutch drive typically consumes three gallons of fuel per hour.

Conveyor Rotation SensorIn the event that the under crusher conveyor stalls, the unit will shut down the crushing process, minimizing the backup of material under the crushing chamber.

Feed HeightWith a low feed height of less than nine feet, the unit can easily be fed from another crusher or an excavator.

Overband MagnetThe standard overband magnet removes metal from the operation.

Hydraulically-folding, Under-crusher ConveyorThe under-crusher conveyor has a large stockpile height of over nine feet.

Ranger™ I32 Compact Horizontal Shaft ImpactorThe Ranger™ I32 mobile horizontal shaft impactor is a modern, compact impact crusher suited for crushing

concrete, rubble, asphalt and stone. The plant’s low operational costs and ease-of-operation make it a must-have

piece of equipment for contractors and recycling operators.

Transport Operation

Standard Metric Standard Metric

Width 7’5” 2.3m 7’5” 2.3m

Length 31’ 9.43m 39’ 3” 12m

Height 8’3” 2.54m 9’6” 2.9m

Weight 44,100lb 20,000kg 44,100lb 20,000kg

Rotor 32” x 29” 813 x 737mm 32” x 29” 813 x 737mm

*Standard

Ease-of-transportThe compact C12 can be easily transported via shipping container.

Cone DesignThe 120hp hydrocone is less susceptible to damage from fines and feed material.

Direct Clutch DriveThe efficient, direct clutch drive typically consumes the minimum amount of fuel.

Closed Side Setting AdjustmentThe crusher’s closed side setting is easily adjusted from the main control panel.

Cone Level SensorOperators can maximize throughput by maintaining a constant feed rate with the cone level sensors.

Conveyor Rotation SensorIn the event that the under crusher conveyor stalls, the unit will shut down the crushing process, minimizing the backup of material under the crushing chamber.

Feed HopperThe feed hopper sides are designed for quick locking from the ground level.

Metal DetectorThe metal detector is fitted as standard.

Hydraulically-folding under crusher conveyorThe conveyor features a large stockpile height of 9’ 1”.

Power Pack DoorsThe wing-style power pack doors provide easy maintenance access around the engine and hydraulic components.

The Ranger™ C12 mobile cone crusher is a compact, easy-to-use cone crusher plant with user-friendly features like a

metal detector, level control sensor and overload protection. It also features a large feed hopper, as well as a closed-

circuit configuration option.

Ranger™ C12 Compact Cone Crusher

Transport Operation

Standard Metric Standard Metric

Width 8’ 4” 2.5m 11’ 1” 3.4m

Length 35’ 10.6m 41’ 4” 12.6m

Height 9’ 10” 3.0m 11’ 9” 3.6m

Weight 49,200lbs* 22,300kgs* 49,200lbs* 22,300kgs*

*Approximate

Ranger™ SF10 Compact Finish Screen

Ease-of-transportThe compact SF10 can be easily transported via shipping container.

Ease-of-use All hydraulic valves are conveniently located to maximize visibility when folding and unfolding conveyors.

Feed HopperThe feed hopper design allows for easy loading from the ground level, even while the reject grid is raised.

Mesh ChangeWith both decks being end-tensioned, screens are easy to change from the feed end when lowered in the transport position.

Side ConveyorsThe side conveyors feature a large stockpile height of 8’ 10”.

The Ranger™ SF10 mobile high incline screen is a compact finishing screen designed with capacity in mind. The

plant’s small footprint and easy-to-transport structure effortlessly complement the high-energy screen and large

product conveyors that give the plant unmatched capacity.

Transport Operation

Standard Metric Standard Metric

Width 7’ 7” 2.33m 36’ 11m

Length 28’ 7” 8.27m 32’ 9” 10m

Height 8’ 5” 2.6m 11’ 6” 3.56m

Weight 25,350lb 11,500kg 25,350lb 11,500kg

Screen 4’ x 9’ 5” 1.2 x 2.9m 4’ x 9’ 5” 1.2 x 2.9m

*Standard

Ranger™ SF16 Compact Finish Screen

Ease-of-transportThe two- and three-deck units can be easily transported via shipping container.

Ease-of-use All hydraulic valves are conveniently located to maximize visibility when folding and unfolding conveyors.

Feed HopperThe feed hopper design allows for easy loading from the ground level, even while the reject grid is raised. The two-way tip reject grid also allows the units to be easily paired with a crusher.

Side ConveyorsThe side conveyors feature a large stockpile height of 13’.

The Ranger™ SF16 mobile high incline screen, designed primarily for high-performance screening applications like

crushed stone, sand, gravel and recycling, is available in 2- or 3-deck configurations with optional hybrid power.

Transport Operation

Standard Metric Standard Metric

Width 8’ 10” 2.7m 45’ 7” 13.9m

Length 39’ 11.9m 43’ 7” 13.3 m

Height 9’ 6” 2.9m 16’ 8” 5.1m

2 Deck 3 Deck

Weight 45,200lb* 20,500kg* 61,600lb* 23,400kg*

Screen 4’ x 16’ 1.2 x 4.9m 4’ x 16’ 1.2 x 4.9m

*Standard

Ranger™ SS10 Compact Direct Feed Screen

Ease-of-transportThe compact SS10 can be easily transported via shipping container.

Screen Box DesignThe heavy-duty, two-deck, two-bearing screen is compatible with tapered grizzly sections, finger screens, punch plate or woven mesh to suit a variety of applications.

Ease-of-useAll hydraulic valves are conveniently located to maximize visibility when folding and unfolding conveyors.

Two-way Split ConversionThe oversized material conveyor can be hydraulically slid back to accept material from both decks with adding or removing other items.

Ease-of-maintenance Designed with maintenance in mind, the SS08 gives producers easy access for screen changes.

Feed Hopper The feed hopper features a low feed height of 9’ 10” for easy loading.

Side ConveyorsThe side conveyors feature a large stockpile height of 9’ 5”.

The Ranger™ SS10 mobile direct feed screen, designed for heavy-duty screening applications, is small enough to fit

inside a container, but powerful enough to withstand the toughest materials.

Transport Operation

Standard Metric Standard Metric

Width 7’ 5” 2.2m 37’ 6” 11.4m

Length 34’ 10” 10.6m 35’ 1” 10.6m

Height 8’ 5” 2.5m 9’ 10” 3m

Weight 30,800lb 14,000kg 30,800lb 14,000kg

Screen 4’ x 10’ 6” 1.2 x 3.2m 4’ x 10’ 6” 1.2 x 3.2m

Ranger™ SS13 Compact Direct Feed ScreenThe Ranger™ SS13 mobile direct feed screen, designed for heavy-duty applications, is small enough to fit inside a

container, but powerful enough to withstand the toughest materials. This plant can be used in both finishing and

scalping applications with flexible features like moveable overs conveyors, allowing both oversized products to exit

using one conveyor with the pull of a handle.

Ease-of-transportThe compact SS13 can be easily transported via shipping container.

Screen Box DesignThe heavy-duty, two-deck, two-bearing screen is compatible with tapered grizzly sections, finger screens, punch plate or woven mesh to suit a variety of applications. The top deck is also available with optional side- or end-tensioned screen deck.

Ease-of-useAll hydraulic valves are conveniently located to maximize visibility when folding and unfolding conveyors and hopper sides.

Two-way Split ConversionThe oversized material conveyor can be hydraulically slid back to accept material from both decks with adding or removing other items.

Feed HopperThe feed hopper features a low feed height of 10’ 11” for easy loading.

Side ConveyorsThe side conveyors feature a large stockpile height of 12’ 4”.

Transport Operation

Standard Metric Standard Metric

Width 7’ 8” 2.4m 20’ 5” 6.2m

Length 33’ 9” 10.2m 43’ 8” 13.3m

Height 11’ 3” 3.4m 10’ 5” 3.1m

Weight 31,500lb 14,300kg 31,500lb 14,300kg

Screen 4’ 3” x 13’ 9” 1.3 x 4.2m 4’ 3” x 13’ 9” 1.3 x 4.2m

Ranger™ SD09 Compact Scalper Screen

Ease-of-transport The SD09 can be easily transported via shipping container, with up to two units per container.

Screen Box DesignThe two-deck, two-bearing screen is compatible with tapered grizzly sections, finger screens, punch plate or woven mesh to suit a variety of applications.

Power Pack DesignThe location and design of the power pack allow for easy maintenance around the three sides of the engines and hydraulic components.

Hydraulically-folding Discharge ConveyorThe discharge conveyor features a large stockpile height of 8’ 7”.

Additional Product ConveyorThe unit can be fitted with an optional conveyor, allowing operators to produce two final products.

The Ranger™ SD09 mobile scalper screen is a compact, heavy-duty screening plant specifically designed for ease-

of-use. This plant can be set up in a few short minutes for processing material and can easily move around the site.

Transport Operation

Standard Metric Standard Metric

Width 7’ 6” 2.3m 7’ 6” 2.3m

Length 20’ 6.1m 29’ 9m

Height 8’ 5” 2.5m 8’ 7” 2.6m

Weight 30,800lb 14,000kg 30,800lb 14,000kg

Screen 9’2” x 8’2” 2.8 x 2.5m 9’2” x 8’2” 2.8 x 2.5m

Ranger™ SRT11 Compact Trommel

Ease-of-transportThe compact SRT11 can be easily transported via shipping container.

Ease-of-useAll hydraulic valves are conveniently located to maximize visibility when folding and unfolding conveyors.

Brush AdjustmentScreen brushes are easily adjusted from the ground level.

Trommel DrumTwo drum styles with mesh and punched plate designs are available. The feeder slides back to provide easy removal and replacement of the drum.

Drum DriveThe drum’s direct-drive design maximizes production by reducing the change of slippage that can occur with competitive designs.

Side ConveyorsThe side conveyors feature a large stockpile height of 10’ 8”.

The Ranger™ SRT11 mobile trommel screen is ideal for screening soil, compost, wood, light rubble and other

materials. With a tracked undercarriage, the Ranger™ SRT11 can easily move around the site.

Transport Operation

Standard Metric Standard Metric

Width 7’ 8” 2.4m 20’ 5” 6.2m

Length 33’ 9” 10.2m 43’ 8” 13.3m

Height 11’ 3” 3.4m 10’ 5” 3.1m

Weight 31,500lb 14,300kg 31,500lb 14,300kg

Screen 5’ x 11’ 1.5 x 3.4m 5’ x 11’ 1.5 x 3.4m

Because Kolberg-Pioneer, Inc., Johnson Crushers International, Inc. and Astec Mobile Screens, Inc. may use in their catalog and literature, field photographs of their products which may have been modified by the owners, products furnished by Kolberg-Pioneer, Inc., Johnson Crushers International, Inc. and Astec Mobile Screens, Inc. may not necessarily be as illustrated therein. Also continuous design progress makes it necessary that specifications be subject to change without notice. All sales of the products of Kolberg-Pioneer, Inc., Johnson Crushers International, Inc. and Astec Mobile Screens, Inc. are subject to the provisions of their standard warranty. Kolberg-Pioneer, Inc., Johnson Crushers International, Inc. and Astec Mobile Screens, Inc. do not warrant or represent that their products meet any federal, state, or local statutes, codes, ordinances, rules, standards or other regulations, including OSHA and MSHA, covering safety, pollution, electrical wiring, etc. Compliance with these statutes and regulations is the responsibility of the user and will be dependent upon the area and the use to which the product is put by the user. In some photographs, guards may have been removed for illustrative purposes only. This equipment should not be operated without all guards attached in their normal position. Placement of guards and other safety equipment is often dependent upon the area and how the product is used. A safety study should be made by the user of the application, and, if required additional guards, warning signs and other safety devices should be installed by the user, wherever appropriate before operating the products.

NOTE: SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE Rev. 2/20

Astec Mobile Screens, Inc.2704 West LeFevre RoadSterling, IL 61081 USAP: (800) 545-2125 | (815) 626-6374F: (815) 626-6430

www.rangertrack.com