RAMPART Catalog 2012

OperatiOnal equipment CatalOg

®

®

®

Advancing the Operator

Page 1Rampart International Corp.

www.rampartcorp.com

Operational Equipment

Personal Protection Equipment

Public Order Equipment

Laser Aiming & Optical Equipment

Fire Resistant Clothing

Medical Equipment

Weapon Systems and Accessories

Hydration & Filtration Systems, Military & Tactical packs, Plate and Armour Carriers, Chest Rigs, MOLLE Pouches, EC Paints, Gloves

Facial Armour, Portable Armour Wall, Ballistic Rifle Plates, Ballistic Helmets, Ballistic Shields and Blankets

Public Order/Corrections Helmets, Gloves, and Neck Guards

Laser Aiming Devices, Weapon Lights, Tactical Periscopes, Combat Optics

FR Base Layers, FR Hoods (Balaclavas)

Survival Blankets, Emergency Bandages, Collapsible Wheeled Stretchers

Firearms, Multi Shot and Single Shot Grenade Launchers, Weapon Grips, Magazine Storage, Weapon Components

Page 2 - 10

Page 11 - 16

Page 17 - 19

Page 20 - 24

2 - 33

Page 34 - 39

Page 28 - 31

Illumination & Marking Systems

Visible and Infrared Illumination and Marking Systems

Page 25 - 27

Table of Contents



www.rampartcorp.com


Op

erat

iona

l Eq

uip

men

t

taste-Free™Co-extruded PE film retains pure liquid taste with no plastic flavor. BPA and Phthalate free. As you will see below the syn-ergy of the Glass-Like™ plastic film and Grunge-Guard™ gives you the assurance that your drinking water stays fresh, odor and taste-free for days, even weeks.

Source Hydration

grunge-guard™ teChnOlOgy

An FDA approved and EPA registered antibacterial per-manently embedded into the reservoir and tube to block bacteria growth. Effective for the life of the system. This protection has no effect on the water and is non-leaching.

glass-like™ Film teChnOlOgy

As with glass, the system is “self-cleaning” since dirt and bacteria cannot stick to the reservoir surface. A liquid con-tainer with a smooth contact surface reduces the ability of bio-film to form. There are no irregularities on the surface for bacteria to cling to.

lOw maintenanCe

SOURCE's technologies com-bined represent the next gen-eration in hydration systems, in which cleaning is no longer an issue. Our systems require the lowest maintenance on the market.

maX CBrn hydratiOn system 3lSource’s Max CBRN hydration system was found to meet the U.S. Army’s CBRN hydration protection requirement. The Max CBRN withstands a 6 hour chemical warfare agent challenge after 30 days of operational use and much higher values when tested to other common interna-tional standards

widepaC lOw prOFile system 3lSOURCE’s new Low profile hydration pack, specially designed for ballistic vest integration. Maximum utilization of our low profile technology reduces the depth of the carrier making it a truly low profile hydration system.

kangarOO COllapsiBle Canteen 1lModular pouch canteen/hydration system, works where back mounted systems often do not. Exclusive 3 layer coextruded Poly-ethylene construction with Taste-Free™, low maintenance, Glass-Like™ liner. Inte-grated Grunge-Guard™ antimicrobial.



www.rampartcorp.com


Op

erational E

quip

ment

Source Hydration

taCtiCal 3l hydratiOn paCk Our most popular hydration system. 3 usage modes: can be worn backpack style, inserted in rucks, or direct-attached to MOLLE on vests or rucks using Source QCA buckle system. Vertical front zipper for fast reservoir access.

uta – universal tap adapter A revolutionary solution for refilling your hydration system on the move. The res-ervoir is filled directly through the tube eliminating the need to remove the hydra-tion pack from the back for refills

kangarOO 1l with pOuCh

The Kangaroo is a modular pouch canteen/hydration system that works where back mounted systems often do not. It has an exclusive 3 layer coextruded Polyethylene construction with Taste-Free™, low main-tenance, Glass-Like™ liner, and Integrated Grunge-Guard™ antimicrobial. It comes in a pouch equipped with Molle attachment system that allows for easy mount onto a vest or rucksack.

rider 3lRider is SOURCE's premier low profile hy-dration system,.It is designed specifically for ballistic vest integration yet quickly converts for back carriage or ruck inser-tion. Maximum utilization of our low pro-file technology greatly reduces the depth of the carrier making it a true low profile system.

COmmander 10l - hydratiOn CargO paCk

3L / 100oz / Cargo 10L

Versatile 2 pocket cargo hydration pack. 2 large pockets for fast access to MREs, ammo, other essentials. 2 1/2” padded shoulder straps with adjustable sternum strap. Ventilated padded back panel for comfort.

aquasOurCe 20l water tanker

AquaSource is a durable, collapsible, backpackable hydration alternative to traditional water cans. Source’s Glass-like™ reservoir technology delivers pure water taste with drastically reduced maintenance plus improved access for cleaning and ice insertion.



www.rampartcorp.com


Op

erat

iona

l Eq

uip

men

t

niCe wOlFpaCk

The Nice Wolfpack System is a versatile pack system that can be set up in multiple configura-tions . At 4200 cubic inches the NICE Wolfpack Alpha’s volume is ideal for patrol missions but will expand to 6100 cubic inches with the addition of the Nice Wolf Pack Pup for five day recon missions. A classic top loading design with dual draw cord shroud increases weather resistance and allows for upward expansion. For the mission critical load this recon style bag is designed around the 117 radio.

The Alpha Pack on a NICE Frame is stable, tough and easy to use. The Patrol Position leaves the Alpha at shoulder height with plenty of head clearance. The Alpha has a built in slab pocket for a radio or other heavy gear, with easy control and antenna access.

Mystery Ranch Military & Tactical Packs

niCe Frame BvsThe NICE Frame is the first design we have come up with that provides a radically better carry than a well-fit and well-packed Mystery Ranch internal frame. A thoughtful redesign of the interface between the user and the load led to the idea of building in pre-programmed flex to an ultra stable platform in a manner that has pro-duced a level of performance never thought possible with extremely heavy loads. The result is a comfortable and flexible frame system capable of controlling huge loads while remaining low-profile and unobtrusive with light loads. Five different styles of packbag completes the NICE Frame System, creating a true pack system that is capable of hauling any load you might encounter

3 day assault BvsThis pack has all of the same great features of the standard 3 Day Assault with the addition of our removable Bolstered Ventilation and Stability (BVS) system (patent pending). This system was designed to give more stability to a pack when worn with body armor. The removable Bolsters are made of injection molded EVA that is incredibly durable, and the removability allows the pack to be optimized for opera-tions where body armor isn’t necessary.

Features: ► Live Wing Belt System can be folded into the sides of the pack ► Futura adjustment customizes the pack to your specific shape

with or without body armor

COmm3 system

The COMM3 system is Mystery Ranch’s new modular com-municator’s pack system. A modular version of our COMM2 System can be carried together on the NICE frame or on their own. The main radio compart-ment secures the PRC117F or G variants, PRC119F, 152s or ASIP radios and can be carried alone with its built-in shoulder straps. The removable laptop bag holds a Toughbook19 and has cable storage and ports for running cabling to the radio. Sustainment gear is handled with the Hitchhiker and Daypack lid -both with shoulders straps to carry separately. The whole system is mounted on the NICE BVS frame for stability with body armor. The modular NICE COMM3 system is ready to adapt to your changing missions.

Additional Mystery Ranch products can be found on page 34



www.rampartcorp.com


Op

erational E

quip

ment

mystery CinCh

Packs and body armor – a painful combination. Typically, the pack’s shoulder pads slide off the armor and cut into your armpits, causing them to chafe and bleed. Over time this can even cause perma-nent nerve damage. The pack can flop around, and the chest strap on many packs can interfere and tangle with your tactical loadout.

The designers at Mystery Ranch have created a solution – adding a modular cinch strap to the front of your IBA, MTV or other body armor. The Mystery Cinch reroutes the shoulder pads of your pack down the front of your armor keeping the shoulder pads from cutting into your armpits.

lOad sling

The Load Sling is the most basic method to lash objects to the NICE Frame. This simple design is reinforced with a carbon-fiberglass stay to main-tain rigidity. Its wide range of adjustability will conform to any load you are attempting to carry be it Jerry cans, chemical weed sprayers, bone-in quar-ters, meat bags, shed antlers or pony kegs.

► Multicam Load Slings will be sold with a Coyote Brown NICE Frame.

niCe CrewCaB(Expanded with Load Cells)

The Crew Cab is a variable capacity pack made up of three separate compartments and multiple components that can be configured to carry loads that vary dramatically in size, shape and weight. The Crew Cab can be collapsed into a compact daypack or expanded for three to four day backpack hunts. The Crew Cab’s integrated expandable platform area is perfect for hauling Mys-tery Ranch Load Cells, Pelican cases, shed antlers, weed control sprayers, entire antelope, or even multiple elk quarters. When fully compressed, the Crew Cab is a low profile 1900 cu. inches that will not interfere with active motion. Fully expanded, the Crew Cab can reach the equivalent of a 5000 cu. pack. For Backcountry Hunters and anyone looking for a system that can do it all, this is your pack.

Mystery Ranch Military & Tactical Packs

niCe OverlOad alpha

The NICE Overload is the Mystery Ranch solution for carrying mortar systems and ammo cans yet still having a simple patrol sized pack available for the mission. This specially designed pack contains a hidden load bearing sling between the packbag and the frame. (pat. pending) The hidden sling’s location insures that heavy items are placed in the optimal location for transferring the load to the user’s back.

Additional Mystery Ranch products can be found on page 34



www.rampartcorp.com


Op

erat

iona

l Eq

uip

men

t

high grOund Chest rig

Every other chest rig on the planet is now too heavy.

► Ultralight Weight: every non-essential piece of thread has been removed to increase your ability to move on the battlefield.

► Interchangeable: ITW buckles allow instant transition from H-Harness Shoulder Straps to Plate Carrier integration.

► Reversible: One side is Multicam. One side is Coyote Brown

► Breathable: no fabric means airflow

high grOund plate Carrier hgpCLightweight, Mix-&-Match Cummerbund:

► Internal & External Cum-merbund Webbing lets you customize inside & outside of cummerbund

► Hook & loop Mesh Pocket will hold mags, radios, and secure nearly all accessories

► Bungee Integration Piece saves you loads of time by changing out the whole cummerbund.

Features: ► Cable Routing ► Single Plate Ejection ► Internal Front Pockets ► Pull Forward Cinch Straps ► Internal Breathable Cloth

High Ground Gear

XerXes Chest rig

Tactical Assault Gear's Xe-rxes Chest Rig was designed in mind for the Gunner who needs the extra support when carrying heavy loads and ease of dawning when getting in and out of vehicles. The whole rig is padded with foam and a sternum strap for ride comfort. There are two heavy duty COBRA buckles in the front of the rig where you can split open for dawning or laying down on the ground in the prone position.

Tactical Assault Gear

shellBaCk taCtiCal talOn drOp leg platFOrm

The Shellback Tactical TALON drop leg will carry up to (4) four .223/5.56 magazines. Internal dividers separate the maga-zines to prevent them from slapping together and making noise. Exterior has two rows of P.A.L.S. webbing for pouches. The magazines are retained by bungee cord with pull tabs al-lowing for retention and quick deployment. Drop leg split top extender is included. Ideal as a Law Enforcement active shooter rig.



www.rampartcorp.com


Op

erational E

quip

ment

eC paint®The origin and reasons of developing the EC Paint® were frequent-ly requirement from European military units for a removable, easy applicable paint in the visual and NIR spectrum for weapons and other equipment. The EC Paint® is produced according to the Eu-ropean regulations for environment protection. Today, we deliver the EC Paint® in large quantities to users all over Europe.

► EC Paint® is manufactured in order to meet military standards for Near Infra Red reflectance needs.

► EC Paint® is available in cans of 400ml for personal equipment or in 5 ltr. for vehicle applications.

eC paint® remOver

EC Paint® is offered with a separate paint remover.

NFM Group

► Item: Forest Green ► NSN: 8010-25 152-2203 ► Color: RAL 6031ZM ► Volume: 400 ml

► Item: Grey ► NSN: – ► Color: RAL 7038MT ► Volume: 400 ml

► Item: Olive Drab ► NSN: 8010-25 152-2204 ► Color: RAL 6014MT ► Volume: 400 ml

► Item: Mud Brown ► NSN: 8010-25 152-2205 ► Color: RAL 8027ZM ► Volume: 400 ml

► Item: sand ► NSN: 8010-25 152-2202 ► Color: RAL 1001MT ► Volume: 400 ml

► Item: Black ► NSN: 8010-25 152-2201 ► Color: RAL 9021ZM ► Volume: 400 ml

► Item: White ► NSN: 8010-25 152-2200 ► Color: RAL 9010MT ► Volume: 400 ml

► Item: EC Paint Remover ► NSN: 8010-25-152-2206 ► Color: – ► Volume: 400 ml



www.rampartcorp.com


Op

erat

iona

l Eq

uip

men

t Outdoor Research

OverlOrd shOrt glOves

This tactile combat glove brings dexterity and protection to the field. The design offers superb weapons-handling performance. Massif® Wolverine™ Stretch Nomex® fabric gives FR protection. Digital FR leather on the palm and fingers gives excellent tactility, while strategically placed vents manage moisture. Leather knuckles and wrist stirrups provide support and protection. Double-needle stitching prevents blown seams in the field.

irOnsight glOves™ The IronSight Gloves™ are a quick drying, highly breathable combat glove made with very dexterious and supple synthetic leather for solid grip of weapons. Slip-free grip pads on the palms and fingers and seamless Precision Grip™ construction provide superior tactil-ity. Back-of-hand injection molding and reinforcements provide light impact protection.

®

piledriver glOves™ Max protection with superior dexterity and breathability for active conditions

Designed for warm-to-hot conditions and high levels of activity, the Piledriver Gloves™ provide max breathability and venting with stretch mesh fabric. Low profile, molded knuckles with force-absorbing foam backing offer the greatest impact protection while maintaining minimal bulk to prevent interference with routine activities. The leather palms and anatomically conformed design enhance solid tactility, dexterity, and a secure fit for precise weapons and tool handling.

Firemark glOves

When breathability and dexterity are paramount, the Firemark Gloves™ provide ultimate comfort and functionality. Protection is provided through lightweight Nomex® fabric for flame resistance and light padding and leather knuckles for a light barrier against impact. Non-FR leather on the palm and fingers along with seam construction designed specifically to allow maximum seamless contact with weapons, these gloves offer the ultimate in tactility.

rOCkFall glOves

A technical weapons-handling glove engineered for combat, the RockFall Gloves™ are flame resistant and highly dexterous. The sculpted construction of the RockFall moves critical seams away from pressure points that occur with weapons handling. The Poron foam on the back of the hand absorbs impact in a critical area of the hand while main-taining flexibility and dexterity.



www.rampartcorp.com


Op

erational E

quip

ment

swOOp mitt liner™ Highly dexterous FR liner with Zoned Insulation™ for extremely cold conditions at high altitudes without compromising dexterit

Developed for pilots and aviation crews in extremely cold conditions at high altitudes, the liner of the Swoop System™ is made of FR fleece with zoned insulation for the great-est warmth where its needed without being bulky where dexterity and tactility are key. Insulation is greatest at the back of hand and wrist to aid in circulation and provide superior warmth. Fingertips are made of seamless FR goat-leather. Made in the USA.

super COulOir glOves Provides superior synergy of warmth and dexterity, versatility

Leave the trailhead with close-fitting soft shell gloves. They'll give you the grip and breathability you need on the skin track. After you've removed your skins pull on the warm, protective shells. They are waterproof and insulated with a synthetic loft that won't wet out in sloppy conditions.

Colours: Coyote

Outdoor Research®

swOOp mitt shell™ Waterproof breathable shell designed for extremely cold conditions at high altitudes

Developed for pilots and aviation crews in extremely cold conditions at high altitudes, the shell of the Swoop System™ provides waterproof and breathable FR protection as well as superior tactility and dexterity for mechanical environments where precision is essential. The FR goat-leather palm is water resistant and provides a solid grip. The trig-ger finger mitt design accommodates all fingers in the mitt cavity for great warmth and dexterity. Made in the USA.

FireBrand glOves™These warm, durable gloves are designed for situations where protection from intense cold and inclement weather is of the greatest importance. The waterproof/breathable shells stand up to abrasion and deflect snow and rain. Water-resistant leather palms allow grip in bitterly cold conditions. The removable liners have fleece palms for durability and lofted insulation for additional warmth.

Rampart International

rampart rsg3 searCh glOve with kevlar ► Constructed of permium grade leather ► Wrist-length elasticised cuff ► 100% Kevlar knit liner for moderate cut resistance ► Sizes: XS - XXXL ► An ideal duty glove for police, security, or correctional operators

Additional Rampart Glove products can be found on page 18



www.rampartcorp.com


Op

erat

iona

l Eq

uip

men

t

LIFESAVER® Bottle 4000

liFesaver® BOttle

The LIFESAVER® Bottle is the World's first water bottle to remove all bacteria, viruses, cysts, parasites, fungi and all other microbiologi-cal waterborne pathogens without the aid chemicals like iodine.

The LIFESAVER® Bottle uses hydrophilic hollow fiber tubes to filter all microbiological contaminates from water. Purified water is streamed through an activated carbon filter, reducing a broad spectrum of chemical residues including: pesticides, endocrine disrupting compounds, medical residues, and heavy metals such as lead and copper. The result is clean, sterile water instantly. LIFESAVER® purifies water solely through filtration, so there is no need for chemical additives such as chlorine or iodine. Just fill, pump, drink.

LIFESAVER® products purify water in excess of EPA standards and are certified compliant with the National Sanitation Foundation’s stringent military protocol NSF P248 – Emergency Military Opera-tions Microbiological Water Purifiers.

LIFESAVER® Bottle 6000

liFesaver® JerryCan

Like the LIFESAVER® Bottle, the LIFESAVER® Jerrycan uses a highly advanced ultra filtration system, originally developed for industri-al applications. It removes bacteria, viruses, cysts, parasites, fungi and all other microbiological waterborne pathogens – without chemicals. Purified water is streamed through an activated carbon filter, reducing a broad spectrum of chemical residues including: pesticides, endocrine disrupting compounds, medical residues, and heavy metals such as lead and copper. It also eliminates bad tastes and odors such as chlorine and sulphur.

The Jerrycan holds approximately 19 liters (5 gallons) and can process up to 20,000 liters (5,300 gallons) of water. There are 2 consumer versions, a military and an AID version. In addition to personal preparedness, the Jerrycan is the suited for Humanitar-ian Relief and Disaster Response situations.

One LIFESAVER® Jerrycan can provide enough safe drinking water for a family of 4 for up to 5 years.

LIFESAVER® Jerrycan 10,000 LIFESAVER® Jerrycan 20,000

Lifesaver Water Filtration

Water is Weight, Why Carry it?

Experience from in-theatre has shown the use of the LIFESAVER bottle can reduce the weight burden on front line troops by over 4kgs per man. With no extra water bottles to carry that's a huge saving. Using a LIFESAVER bottle frees up space for more important equipment. LIFESAVER delivers increased operational duration without the constraints of water resupply.



www.rampartcorp.com

Personal Protection Equipment Perso

nal Pro

tection E

quip

ment

ops-core

Fast BallistiC - high Cut

► Same amount of head coverage / size as MICH 2002 “Gun-Fighter” model cut ► Carbon + UHMWPE shell = 20% weight reduction ► FAST helmet fully loaded (as shown here) - weighs less than same size MICH 2002 without

add-ons ► Lightweight, multi-impact, ventilated liner with repositionable EPP impact pads and LDV

closed-cell comfort foam ► Occ-Dial adjustable fitband with replaceable leather front, nape, and side pads quickly detaches

to allow convenient donning and doffing of COMs headsets with internal top headbands ► Integrated Head-Loc chinstrap retention system gives helmet 4x more stability than standard

issue ACH helmet suspension / retention products ► FAST-ARCs - 4 Position Accessory Rail Connectors: non-snag attachment points for quick yet

secure donning or doffing of headborne accessories

sentry BallistiC helmet (light weight aCh) ► This new helmet shell provides the same level of protective coverage and meets all of the US

Army’s ACH CO/PD-05-04 2007 requirements with a shape that offers significant additional performance benefits

► The Sentry’s ballistic shell is based on FAST helmet pedigree with hybrid materials weighing a 1/2 lb. less than the ACH, but with processing improvements to provide even better ballistic backface deformation performance of less than 5/8” (16 mm)

► This refined shell shape also provides better hearing localization and attenuation than the ACH with a modified ear area shape and is compatible with ARC rail mounted Peltor style hearing protection and COMMs devices

► The Sentry utilizes an improved liner and suspension system that provides the same comfort and stability as our FAST helmets but with increased protection by mitigating blunt trauma impacts of 14 f/s instead of the traditional ACH requirement of 10 f/s

Fast Base Jump military helmet

► Base Jump helmet is the same design as the Ballistic and Carbon FAST helmets but with a poly-carbonate shell and molded front NVG mount

► Great for training, search and rescue, climbing, and other outdoor activities. It offers all the benefits and features of FAST helmets at a lower cost, comparable to other recreational sport helmets

► FAST Base Jump helmet is available in two versions: Sports and Military

Fast CarBOn helmet

► Lightweight carbon fiber shell ► Ideal for recce operations, fast roping, climbing, training ► Designed with the structural integrity to comfortably support binocular style NVDs ► Identical to ballistic version except for shell



www.rampartcorp.com


Per

sona

l Pro

tect

ion

Eq

uip

men

t

Fast g3CThe FAST G3C was designed to provide protection for riflemen and any personnel who need a cheek weld with their weapon. The flexibility allows a proper cheek weld, for right and left hand shooters- while affording a high level of ballistic protection. The G3C is ballistically comparable to the Improved Outer Tactical Vest (IOTV) or the majority of currently issued soft armor vests.

Features and Specifications ► Lightweight- .9lbs, designed for riflemen ► Flexible armor- allows for cheek weld with rifle ► NVG, communication equipment, eye pro

compatible ► No loss of peripheral vision ► No helmet modifications required ► Push button release, on or off in 1 second ► Multiple sizes ► 1000D Cordura outershell

Optional Accessories ► Accessory Rail

MTEK Weapon Systems

predatOr Fast g4The Predator FAST (Facial Armor SysTem) G4 is the newest generation of the G Series Armor Systems designed and manufactured by MTek Weapon Systems. While the G3A was designed for vehicle mounted convoy operations, it was put to the test in a multitude of tasks while issued out for combat operations by the U.S. Army in both Iraq and Afghanistan. With technological advancements made with both the design and the manufacturing process we were able to develop the G4 into the strongest, lightest, and most user friendly maxil-lofacial protection system on the market today! Our advancements combined with feedback direct from end-users' enabled us to create what we believe is the most compatible protection system available with your currently issued gear. The G4 still boasts an impressive protection level that meets or exceeds that of the current issued Army Combat Helmet (ACH) and the Marine Corps Lightweight Helmet (LWH), while weighing less then ONE Lbs.



www.rampartcorp.com


nal Pro

tection E

quip

ment

Leading Technology Composites

LTC is a world leader in armour products and has one of the most extensive offerings of ballistic plates on the market.

From NIJ 06 certified level IV stand alone, polyethylene, low profile, lightweight, ESAPI, XSAPI, Training.LTC has a ballistic plate to meet your requirement

level iii, level iii++ plates

level iv and level iii/iv plates

Description Sizes Shape / Cut

Level III in Conjunction w/ IIIA 5x7, 8x10, 10x12 Single Curve

Level III Stand Alone 5x7, 8x10. 10x12 Single Curve

Level III Stand Alone 10x12 Single Curve, Shooters Cut

NIJ 06 Level III, Stand Alone 7x8, 6x8, 6x6, Single Curve, Shooters Cut

Polyethylene 5x7, 8x10, 10x12

Level III++ Stand Alone 8x10, 10x12 Single Curve, Shooters Cut

Level III++ Side Plate 6x6, 6x8, 7x8 Single Curve – Full Size


Level IV Stand Alone 10x12 Single Curve, Square

Level IV Stand Alone 10x12 Single curve, shooters cut

Level IV Stand Alone 8x10 Single Curve, Square

Level IV Stand Alone 8x10 Single Curve, Shooters Cut

Level IV Stand Alone Side Plates 6x6, 6x8, 7x8 Single Curve – Full Size

NIJ 06 Level IV Stand Alone 10x12, 8x10 Single Curve, square, shooters cut or SAPI shooters cut

NIJ 06 Level IV Stand Alone Side Plates 5x7, 6x6, 6x8, 7x8 Single Curve – Full Size

Level IV Stand Alone 10x12 Triple Curve, shooters cut

Level IV Stand Alone Lightweight 8x10, 10x12 Multi Curve, Shooters Cut

Level IV Stand Alone SAPI Size S/M/L/XL SAPI Shape

Level III/IV in conjunction with IIIA SAPI Size S/M/L/XL SAPI Shape

Level III/IV in conjunction with IIIA 6x6, 6x8, 7x8 Single Curve

NIJ 06 Level III/IV in conjunction with IIIA Side Plates

8x10, 10x12 Single Curve, square, shooters cut or SAPI shooters cut



www.rampartcorp.com


Per

sona

l Pro

tect

ion

Eq

uip

men

t

esapi, sapi, heavy esapi sapi, Xsapi

trauma plates

training plates:

Leading Technology Composites


ESAPI Spec S/M/L/XL SAPI ESAPI

Heavy E-SAPI

(Ballistically compliant to E-SAPI Spec)

S/M/L/XL ESAPI

ESAPI Side Plate 6x6, 6x8, 7x8 Full Size

Heavy ESAPI Side Plate 6x6, 7x8 Full Size

Heavy SAPI S/M/L/XL 10x12 SAPI Shape

Stealth Plate (API) S/M/L/XL 10x12 Multi Curve, Shooters Cut

Stealth Plate (API) Side Plate 6x6 Single Curve – Full Size


Level IIIA, Polyethylene 5x8, 8x10, 10x12 Full Size

Level IIIA, Aramid 5x8, 8x10, 10x12 Full Size


Mock SAPI – Training Plate S/M/L/XL SAPI ESAPI



www.rampartcorp.com


nal Pro

tection E

quip

ment

pOintman BallistiC shields

Defenshield delivers the highest quality and most efficient ballistic protection and combat solutions to those in the line of fire.

Technical Description ► Hand Held Ballistic Shield; 25% lighter than industry comparable shields. ► NIJ 0108.01 Level IIIa (.44mag) resistent ► Curved platform designed for protection against angled shots on platform,

bezel and viewport . ► View port dimensions: 3.5” x 14”. ► Ambidextrous handle to minimize fatigue as well as an optional straight

handle ► Padded forearm insert to provide ballistic impact protection against back

face deformationOptional Capabilities

► Momentary, Constant & Strobe light option with 900 Lumens (2x greater than industry standard). Adds 1.25 lbs to the shield.

► Available with or without a view port. ► Protective film available for the viewport to prevent scratches ► Protective canvas carrying bag

mdFp shield

100% Visibility, 100% Coverage.

The Mobile Defensive Fighting Position (MDFP) is designed to provide troops in hostile environments and entry control points with an area of maximum safety and full visibility. When standing behind an MDFP, personnel are protected from head to toe with armor that defeats a range of ballistics from 9mm to 30-06 Armor-Piercing rounds, including 5.56mm and 7.62 NATO rounds.

Constructed of durable, anti-corrosion, powder-coated and finished armor and a trans-parent armor window, MDFPs are an effective tool for instantly hardening any location. The units are instantly deployable and can be disassembled in a matter of minutes without the use of tools - no engineers or architects required.

MDFPs are fitted with either lag plates for stability, casters for movement on improved surfaces such as concrete or carpet, or filled ATV-style tires for movement on unimproved surfaces such as grass or gravel, and can be easily moved across any surface by a single officer. The units are mobile under fire and can be used to cover and remove injured persons from the scene of a conflict. Optional gun ports provide a safe area from which troops can return fire.

MDFP units meet a range of ballistics ratings from NIJ Level II, III, III-A, and IV, and Depart-ment of State Standard 01.01, and have been independently tested at HP White Labs in Street, MD. Uses include physical security - establishing a higher level of deterrence and protection at checkpoints, perimeter control centers, interior or exterior building security, roadblocks and observation points, anti-terror operations, hostage negotiations and riot control.

Defenshield Ballistic Protection Equipment

Gladiator24” x 48”13.3 lbs16.7 lbs

Spartan24” x 40”11.5 lbs15.0 lbs

Dimensions:Weight w/o Viewport:

Weight w/ Viewport:

Additional Defenshield products can be found on page 19



www.rampartcorp.com


Per

sona

l Pro

tect

ion

Eq

uip

men

t

Smith Optics Elite

Outside the wire (Otw) Field kit

Designed to provide maximum ballistic protection, the OTW goggle offers superior optical clar-ity and a custom fit strap system to keep your eyes protected in any condition.

Meets US standard MIL-DTL-43511D, ANSI Z87.1-2003 and EN166 standards

Outside the wire (Otw) turBO Fan Field kit

Over 30 years ago, Smith Optics introduced Turbo Fan technol-ogy. We now incorporate this fog-killing innovation in the Elite Tactical Core product line. A micro electronic fan efficiently and silently evacuates moist air from the goggle chamber to keep you fog free. Our system exhausts 50% more air volume at a 40% lower decibel level than the competition. So sweat it out. The OTW Turbo Fan will be there to keep it under control.

aegis arC Field kit

The Aegis Eyeshield offers maxi-mized coverage and protection for high impact environments. Whether you are deployed, train-ing for a mission, or shooting for sport, the Aegis is the piece of eye protection you want with you.

Meets US Standard MIL-PRF-31013, ANSI Z87.1-2003 & EN 166 standards

aegis arC eChO COmpaCt Field kit

Finally, a ballistic spectacle de-signed for use with and without over the ear hearing protection and communications systems. The Aegis Echo is designed for anyone who has ever felt the “rage” of their temple and helmet combination digging in over hours of use. Once you wear the Echo, you will wonder why you use anything else.

Meets US Mil Spec MIL-PRF-31013 and ANSI Z87.1 standards

lOprO regulatOr gOggle Field kit

This goggle was designed with two primary tasks in mind - inte-grate under night vision systems and their mounts without causing optical interference and keeps lens fogging at bay.

Lenses meet US MIL-DTL-43511D goggle impact level

Lowest profile full face goggle & easy night vision goggle integration

BOOgie regulatOr gOggle

The Boogie Regulator Goggle has the qualities you need in your eye protection - top level impact rat-ing, the patented Smith Regulator for lens fog prevention, and mul-tiple strap options ensuring inte-gration. It's the perfect example of simplicity meeting technology.

Lenses meet US MIL-DTL-43511D goggle impact level

lOCkwOOd taCtiCal

The Lockwood Tactical features a classic, yet modern profile. From a mountain bike ride to the job, the Lockwood is a true multi-tasker.

Proprietary high impact lenses material meets ANSI Z87.1 standard for optics and MIL-PRF-31013 standard for impact.



www.rampartcorp.com


Pub

lic Ord

er Eq

uipm

ent

rs-100 riOt/taCtiCal helmet

STANDARDS

Meets or exceeds National Institute of Justice 0104.02 (riot), 0105.01 (crash) requirements and Department of Transportation FMVSS-218 (for impact only).

SHELL

The three-quarter coverage shell is constructed of high density Tenntex Thermo Composite utilizing high pressure injection compression molding for increased strength while maintaining a lightweight helmet, shell edge has a finished trim made of steel core extruded neoprene rubber. Visor is an integral molded part of the shell. Back edge of shell is tapered outward to allow positioning of shoulder weapon in prone position. Helmet sides flare to accommodate double canister gas masks behind face shield. Shell will be painted with a scratch resistant flat black paint. Complete helmet will not exceed 3 lbs. including shield.

Max Pro Police & Armor

rd-taC riOt helmet

STANDARDS

Meets or exceeds National Institute of Justice 0104.02 (riot), 0105.01 (crash) requirements and Department of Transportation FMVSS-218 (for impact only). Custom painting to your specs available for additional cost, if desired.

SHELL

The half-coverage shell is constructed of Arimid Fiber Reinforced Thermoplastic composite utilizing high pressure compression molding for increased strength while maintaining a light weight helmet. The visor will be an integral part of the shell. The shell edge will be finished with a tough molded trim. Shell will be painted with a scratch resistant flat black paint. Complete helmet with shield will not exceed 3 lbs.

Ct-100 taCtiCal/COrreCtiOnal helmet with shield and grid

STANDARDS

Meets or exceeds National Institute of Justice 0104.02 (riot), 0105.01 (crash) requirements and Department of Transportation FMVSS-218 (for impact only).

SHELL

The three-quarter coverage shell is constructed of high density Tenntex Thermo Composite utilizing high pressure injection compression molding for increased strength while keeping a lightweight helmet, shell edge will have a finished trim made of steel core extruded neoprene rubber. Back edge of shell will be tapered outward to allow positioning of shoulder weapon in prone position. Helmet sides flare to accommodate double canister gas masks behind face shields. Most current gas masks can be used with this helmet. Shell will be painted with a scratch resistant flat black paint. Complete helmet will not be more than 3 lbs. 5 oz. Fully equipped including the shield grid.



www.rampartcorp.com


Pub

lic O

rder

Eq

uip

men

t

rpOg 1 (rampart puBliC Order glOve) ► Ideally suited for Public Order or Cor-

rectional Use ► Complete padding protects hand,

fingers and wrist ► Wide wrist cuff for easy donning with

equipment ► Grade A leather, reinforced palms ► Colour: Black ► Sizes: XS, S, M, L, XL, XXL ► Available with or without fire resistant

Nomex lining

rpOg 2 (rampart puBliC Order glOve) ► Ideally suited for Public Order or Cor-

rectional Use ► Padding protects hand, fingers and

wrist ► Extra thumb padding for added pro-

tection during baton deployment ► Grade A leather, reinforced palms ► Colour: Black ► Sizes: XS, S, M, L, XL, XXL ► Available with or without fire resistant

Nomex lining

tnp4 taCtiCal neCk prOteCtOr 4 ► Ideally suited for Public Order or Cor-

rectional Use ► Provides foam and plastic padding

around neck and throat to mitigate blunt force trauma

► Available with Dyneema slash resistance and Nomex fire resistant exterior

► Colour: Black ► Sizes: XS, S, M, L, XL, 2XL, 3XL

Rampart International Public Order Equipment

Additional Rampart Glove products can be found on page 9



www.rampartcorp.com


Pub

lic Ord

er Eq

uipm

ent

handheld riOt shield (nBs)Superior protection from a lightweight design

The Handheld Riot Shield (NBS) is designed for use in corrections and law enforcement applications. Particularly effective for crowd and riot control, the NBS is lightweight, shat-ter resistant and capable of withstanding impacts from bricks, bottles, splash and rocks.

NBS units also stand up to all types of swinging strikes. At the National Institute of Jus-tice Annual Mock Prison Riot™, the NBS absorbed blows from batons, chairs, 2x4’s, and crowbars with no damage to the shield or user. The NBS offers many new and patented features not found on any other shield on the market. It is flexible — capable of being folded in half repeatedly with no creasing damage, and its interlocking edges allow per-sonnel to form a unified, solid barrier with multiple shields. It is also available in right- or left-handed configurations.

An ambidextrous model is also available and was previewed at the 2010 Mock Prison Riot. This model allows the officer to quickly and easily change grip to accommodate weapons or tools, as well as use a two-handed grip for extra reinforcement.

Features ► Sturdy Aluminum Handle ► Deterrent Bump (optional) ► Heavy-Duty Armband ► Shield-Guiding Thigh Pad ► Interlocking Flared Edges ► Available in 36” and 48” lengths

Capture shield

The Capture Shield version of the NBS Handheld Riot Shield features a concave shape, making it ideal for use in prisons, riots and other crowd control situations. Personnel remain protected, using the NBS's unique shape to subdue defiant persons by pinning them against walls or the ground. The 42" Capture Shield is particularly effective aiding guards in extracting disorderly inmates from their cells.

Defenshield Ballistic Protection Equipment

Additional Defenshield products can be found on page 15



www.rampartcorp.com

Laser Aiming and Optical Equipment

Lase

r A

imin

g &

Op

tical

Eq

uip

men

t

dBal-a2 The powerful DBAL-A2 is equipped with an IR pointer, IR pointer/illuminator and your choice of a red Super Power Point or green Ultra Power Point visible pointer which is five times more visible than traditional red lasers. The DBAL-A2 is designed for maximum operational versatility while keeping weight and size to a minimum. The AN/PEQ-15A (U.S. DoD model) is currently in service with the U.S. Department of Defense and special operations forces worldwide. Frequently compared to the plastic-molded *ATPIAL (AN/PEQ-15), the DBAL-A2 delivers superior operational longevity due to its all metal housing and mounting system.

Available in Foliage Green, Desert Sand or Black.

mOdelsDBAL-A2

► IR Pointer (<50mW) ► IR Pointer/Illuminator (<50mW)

Choice of ► Red Visible Pointer (<5mW) or ► Green Visible Pointer (<5mW, <30mW or <50mW)

LE/Military only

DBAL-A2H ► IR Pointer (<50mW) ► IR Pointer/Illuminator (<200mW)

Choice of ► Red Visible Pointer (<5mW) or ► Green Visible Pointer (<5mW, <30mW or <50mW)

Laser Devices

dBal-i2The NEW DBAL-I2 is the cutting-edge replacement for the AN/PEQ-2A combining an infrared laser pointer and infrared pointer/ il-luminator in a lightweight, rugged metal housing.

The DBAL-I2 ► Provides the same functionality as the AN/PEQ-2A ► Is smaller and lighter than the AN/PEQ-2A ► Is significantly shorter than the AN/PEQ-2A and leaves more

rail space for other accessories ► Mirrors the AN/PEQ-2A activation switch options

Available in Desert Sand or Black.

mOdelsDBAL-I2

► IR Pointer (<50mW) with IR Pointer/Illuminator (<50mW or <*200mW) or

► Red Visible Pointer (<5mW) with IR Pointer/Illuminator (<5mW) or

► Green Visible Pointer (<5mW) with IR Pointer/Illuminator (<5mW) or

► Green Visible Pointer (<30mW) with IR Pointer/Illuminator (<50mW)

EXPORT LICENSE REQUIRED



www.rampartcorp.com

Laser Aiming and Optical Equipment Laser Aim

ing and

Op

tical Eq

uipm

ent

spirThe new SPIR (Special Purpose Infrared LED Illuminator) is equipped with a Class 1, Eye-Safe Infrared LED Illuminator designed for use with Night Vision devices.

The SPIR can be handheld or mounted to any MIL-STD-1913 rail using the self-adjusting, Quick Release HT Mount.

Variable lens adjustment from 2° – 30° combined with 600mW of infrared light provides an eye-safe means of illuminating distances up to 800 meters.

The SPIR is an invaluable illumination tool for a wide range of civilian, law enforcement, military or special forces applications.

Laser Devices

dBal-d2The new DBAL-D2 (Dual Beam Aiming Laser with IR LED Illumina-tor) is the commercial version of its predessor, the DBAL-A2.

This compact, rugged device is equipped with either a Red or Green Visible Pointer, Class 1, Eye-Safe IR Pointer and a Class 1, IR LED Illuminator which provides an eye-safe means of illuminating distances up to 800 meters.

The DBAL-D2 can be handheld or weapon-mounted to any MIL-STD-1913/Picatinny rail using the self-adjusting quick release HT mount.

Specification ► IR Pointer (<0.7mW) ► IR LED Illuminator (<600mW nominal) ► Choice of Red or Green Visible Pointer (<5mW)

mOlad llm-01The MOLAD LLM-01 laser light module delivers with proven reliability and pin-point accuracy. This multi-functional device offers a durable tactical light, an Eye-Safe infrared LED illuminator a red visible laser pointer, and an Eye-Safe infrared infrared laser pointer.

The MOLAD LLM-01 allows users to move seamlessly in low light with or without the use of night vision.

MODELS

MOLAD LLM-01 for Rifles ► Visible Red Pointer (<30mW) ► IR Pointer (<35mW) ► IR LED Illuminator (<25mW LED)

Choice of ► 95 Lumen Incandescent light or ► <200 Lumen High Intensity LED

MOLAD LLM-01 for Pistols ► Visible Red Pointer (<5mW) ► IR Pointer (<0.44mW) ► IR LED Illuminator (<25mW LED)

Choice of ► 95 Lumen Incandescent light or ► <200 Lumen High Intensity LED



www.rampartcorp.com


Lase

r A

imin

g &

Op

tical

Eq

uip

men

t

uni-sCOpe lhp-2000 light handheld taCtiCal perisCOpe

The LHP-2000 is especially designed by Uni-Scope Optical Systems for recon-naissance, observation and surveillance missions from positions of cover and/or conceal-ment. Rapidly deployed from its unique folded po-sition this “around the corner” tactical periscope allows the users to view around and over urban obstacles, rural typography and other complex terrain.

Accessories ► Anti-Glare Filter ► Laser Protection Filters ► Flashlights ► Laser Illumination Pointers ► Tactical Tripods ► Night Vision Adapters ► Still & Video Camera ► Laser Range Finders

Laser Devices

Uni-Scope

Operative lights Laser Devices’ OPERATIVE® series of tactical lights are compact and lightweight, yet powerful and precise with the versatility you need to face any situ-ation. These pocket-sized flashlights pack the power of larger full-size flashlights at a fraction of their size and weight.

The OV-2 lighting system has a modular design to meet the wide variety of today's battlefield needs. Interchangeable On/Off/Momentary push button switch, remote cable pressure pad switch or Dual (Remote Cable and Push Button Switch) options provide activation flexibility. The third generation model OV-3 adds an infrared laser illuminator to the tactical light. A selector ring located on the front of the light allows operators to switch between high and low power visible and infrared modes, or modu-lation mode for the tactical light. Both the OV-2 and the OV-3 easily mount to any MIL-SPEC-1913 rail using our low profile thumb screw mount that neatly tucks the light in between the top and side rails of an M4/M16.

mOdelsOV-2

► <200 lumen high intensity LED

► Multiple configurations available.

OV-3 (LE/Military only; EX-PORT LICENSE REQUIRED)

► IR Laser Illuminator (<25mW)

► <200 lumen high intensity LED



www.rampartcorp.com

Laser Aiming and Optical Equipment Laser Aim

ing and

Op

tical Eq

uipm

ent

m2124 (Cnvd)Features

► Advanced design eliminates requirement to remove a primary daytime sighting system when converting to night vision

► Supplements existing primary sighting system ► Maintains consistent eye relief and shooting position, as well

as retaining user muscle memory ► Optional AA battery conversion cap allows AA or CR123 bat-

tery capability ► Manual gain and focus adjustments for custom image quality

optimization ► May also be used with spotting scopes and as a handheld

observation device ► O p t i m i z e d

for 7.62, .338 LaPua and other common

► “ s n i p e r -grade” weap-on systems

snvg-14 (an/pvs-14)PVS-14 Monocular Night Vision Device

The SNVG-14 (AN/PVS-14) monocular night vision device is one of the most versa-tile night vision systems available. It offers capabilities of a hand-held pocketscope, a right or left eye-mounted monocular and a weapon sight when mounted in conjunc-tion with an infrared laser aimer other other night vision-compatible primary optic. It is lightweight and uses only 1 AA standard battery.

snvg-15 (an/pvs-15)PVS-15 Binocular Night Vision System

The SNVG-15 (AN/PVS-15) binocular night vision system is a twin-tubed design com-parable to aviation system which offers better depth perception than single tube designs. The SNVG-15 is a self-contained night vision system operating on a single AA battery. It is compact and lightweight for hands-free or one-hand operation. An active projected infrared LED provides short range illumination allowing such activities as map reading.

snvg-miniMini-Monocular Night Vision Device

The SNVG-MINI uses mil-spec housing is extremely lightweight, weighing only 9.2 oz and can be submerged to depths up to 66 feet. The MV-14 Ultra operates using either one AA or one 3V lithium battery and includes a built in IR Illumina-tor for increased image clarity in low light situations.

Summit Night Vision Equipment

l-3 eOs Cnvd-lrFeatures

► Advanced design eliminates requirement to remove a primary daytime sighting system when converting to night vision

► Supplements existing primary sighting system ► Maintains consistent eye relief and shooting position, as well

as retaining user muscle memory ► Optional AA battery conversion cap allows AA or CR123 bat-

tery capability ► Manual gain and focus adjustments for custom image quality

optimization ► May also be used with spotting scopes and as a handheld

observation device ► Optimized for

7.62, .338 LaPua and other com-mon “sniper-grade” weapon systems



www.rampartcorp.com


Lase

r A

imin

g &

Op

tical

Eq

uip

men

t

Browe Combat Optics

BrOwe COmBat OptiC (BCO)The 4x32 BROWE® Combat Optic (BCO) is a state-of-the-art optic that delivers the best-in-practice features of high-quality optical glass, high precision machining, and rugged military design with unique, next-in-practice features that puts the BROWE® Combat Optic (BCO) at the forefront of its class. The BCO offers customers a modern designed, internally-adjustable, combat optic with many unique features, such as Single Intuitive Control (SIC), Target Light Sensor Technology, field-programmable BCO Microcontroller, and a vibration sensor – all packaged in a rugged and versatile titanium housing.

prOduCt speCiFiCatiOns:Magnification: 4x

Entrance Pupil: 32mm

Exit Pupil: 8mm

Eye Relief: 37mm

Length: 132mm nominal

Width: 67mm nominal

Weight: 485g (estimated)

Field of view: 7 °

Adjustment at 100 yds: .5 MOA

Adjustment: Internally adjustable prism

Reticle pattern: BCO Chevron or Crosshair

Ballistic Compensated: 5.56mm /.223 or 7.62/.308 Caliber

Color Day/Night: Red

Illumination source: LED

Illumination source

controlled-Automatic: Flash programmable Microcontroller

Illumination source

controlled-Manual: 10 days settings and 3 night vision

Battery Life: 2000 hrs. Avg. (Min. 720hrs. on max)

Housing Material: Military Grade Pure Titanium - TiCP-2

Water Proof: 42m / 130ft.



www.rampartcorp.com

Illumination & Marking Systems Illuminatio

n & M

arking S

ystems

wml, white – 125 lumens

White Multifunction Weapon Mounted Light

The INFORCE WML White light produces 125 lumens of penetrating light with a tight beam for close- to mid-range applications and balanced peripheral light for discernment of the surrounding area. Features field-programmable white light – from high-to-low or low-to-high – plus a strobe that is easily disabled. Its angled activation button is comfortable to operate without interference of wires or tape switches. The integrated patent pending rail clamping system is compact, convenient and secure. Waterproof to 66 feet. Two distinct easy-to-operate lockout systems are incorporated to avoid accidental discharge.

wml, white/ir – 125 lumens

White/Infrared Multifunction Weapon Mounted Light

The INFORCE WML produces 125 lumens of pen-etrating white light with a tight beam for close- to mid-range applications and balanced peripheral light for discernment of the surrounding area. Features field-programmable white light – from high-to-low or low-to-high – plus a strobe that is easily disabled. A thumb-action twist of the mode selection switch pro-vides 75mW of infrared light with no need of IR filters. The integrated patent pending rail clamping system is compact, convenient and secure. Waterproof to 66 feet. Two distinct easy-to-operate lockout systems are incorporated to avoid accidental discharge.

wml white light - mOmentary/high Only

The INFORCE WML White light produces 125 lumens of penetrating light with a tight beam for close- to mid-range applications and balanced peripheral light for discernment of the surrounding area. Features momentary/HIGH white light. Its angled activation button is comfortable to operate without interfer-ence of wires or tape switches. The integrated patent pending rail clamping system is compact, convenient and secure. Waterproof to 66 feet. Two distinct easy-to-operate lockout systems are incorporated to avoid accidental discharge.

Note: Momentary/High Functions ONLY

Inforce Multifunction Weapon Mounted Lights



www.rampartcorp.com

Illumination & Marking Systems

Illum

inat

ion

& M

arki

ng S

yste

ms

S & S Precision

manta strOBe

PURPOSE :

The Manta Strobe is part of S & S Precision’s Advanced Illumina-tion & Marking Systems (AIMS). Specifically designed to eliminate accidental overt light discharge.

DETAILS: ► Infrared and Overt light modes ► Base plate is shaped to fit to the curvature of modern combat

helmets ► Positive one-handed operation with tactile power switch and

vibrating motor feedbackP/N: MS-0011 *Patent Pending

v-litePURPOSE

The V-Lite is part of S&S Precision’s Advanced Illumination & Marking Systems (AIMS). This product’s housing is flat and flex-ible, which forms to the curvature of the users helmet, reducing snag hazards during parachute operations. The V-Lite’s low profile design attaches easily into MOLLE.

DETAILS ► V-Lite colors: Red, Green, Blue and Infrared ► Available in 1 0f 3 Modes: On/Off, Blink/Off or On/Blink/Off ► Run-time:120+ Hours (continuous) *run-times vary depend-

ing on frequency of use and duration of “ON” cycles (*Battery is not replaceable)

► Includes Plastic V-Lite sleeve with Velcro backing and LanyardPlease download contact Rampart Internation for complete list

*Patent Pending



www.rampartcorp.com

Illumination & Marking Systems Illuminatio

n & M

arking S

ystems

Princeton Tec

pOint - mplsDesigned for the end-user needing to streamline their gear, the Point - MPLS offers powerful LED technology in a virtually weightless package. Simplicity is key with a large, positive feeling push button and a single LED. With the capability to be mounted practically anywhere, you’ll never need to take your eyes off of your task at hand with the Point - MPLS. Available with White, Red, IR, Green, or Blue LED.

switCh - mplsThe Switch-MPLS is designed as a personal task light that offers very light weight and unmatched versatility. Combining functionality with intuitive design is the name of the game when you have a dual-LED head on a flexi-neck platform. Specialty lighting colors are important when accomplishing tasks that require night vision preservation, the Switch-MPLS will always turn on in the low mode of these specialty colors, but with a 2 second hold of the large push button, the Switch-MPLS will activate the bright white or red LED mode for better illumination. Specialty LED colors include Red, IR, Blue, and Green. High Output colors include White and Red.

Charge - mplsThe Charge MPLS is the natural evolution of personal task lights, with the flexi-neck design that gets spot illumination to the task at hand. New for the Charge is the addition of a higher power Maxbright LED with a wide beam pattern that makes bright light easily accessible with a two-second press of the button. A momentarily press of the button illuminates a cluster of three Ultrabright LEDs, available in choice of red, blue, green, infrared or R/B/IR and R/G/IR combinations.

remiX prO mplsThe Remix Pro is powered by a single CR123 battery providing excelled performance in cold weather, light weight, and compact size. Although the Remix Pro provides dual light output modes, it will always turn on in low mode on the Ultrabright setting. Combine these features with a large on/off button, an easy access battery door and a reliable asymmetrical bracket, and you can be sure that the Remix Pro is equipped to endure the rigors of your next adventure.

quad ii (intrinsiCally saFe)The second in our series of Intrinsically Safe headlamps, the Quad® II provides unparalleled design and performance. The Quad® II shares the same basic design principles as the original and proven Quad® but takes it up to a Cl 1 UL Div. 1 rating. The fundamental lighting characteristic of the Quad® provides a vast amount of area light for all purpose needs and performing up-close tasks. With its robust construction, superior materials, and waterproof design, the Quad® II is suited for any envi-ronment. The Quad® II is powered by 3 AAA batteries allowing for a compact footprint, and includes a rubber strap for hard hat use along with industrial 3M Dual LockTM and a nylon strap for use as a standard headlamp.



www.rampartcorp.com


Wea

po

n S

yste

ms

and

Acc

esso

ries

LaRue Tactical

larue taCtiCal OBr 7.62The LaRue OBR (Optimized Battle Rifle) was built from the ground up, using a newly designed upper-receiver platform, combined with a lower, inspired from our successful 5.56 MM lower. Both the upper and lower are CNC-machined from billet, for the optimum fit and consistency. Machined from billet 7075-T6, the receiver components are designed with more material in critical areas to alleviate known issues of weakness in 7.62 platforms and to stiffen the receiver....translating into maximum accuracy.

The upper-rail provides generous room for all issue weapon-mounted night-vision day/night combinations (suitable for 7.62 MM). The built-in cant provides correct ballistic orientation for all inline night vision combinations. The MIL-STD-1913 side rails are detachable, so that they can be configured for Vis / IR illuminators, etc, or left off to keep rails pristine, without the need for bulky rail covers. The bottom rails are also detachable, and can be positioned anywhere along the entire lower length, for the interface of MIL-STD-1913 equipped bipods, grips, tripod mounts, etc. These rails are offered as spare parts for field-service replacement, keeping repair cost at a minimum.

Barrels

The barrels are LW-50 stainless steel in 16.1", 18" & 20" lengths. LW-50 has been proven for over 15 years, in military and civilian uses ranging from sniper, tactical, target, and other high-performance applications where long life and accuracy are critical. All gas blocks feature our unique Port Selector Technology (PST), a two-point adjustable gas selector that allows optimum function between sup-pressed, and unsuppressed operation at the flip of a switch. All barrels are threaded in 5/8 x 24, with an A2-type flash hider attached (other muzzle devices can be added at an additional cost).

Internals

The Bolts and Bolt Carriers are hand-polished hard-chrome with max-staked carrier keys. The carrier key contact areas are designed for zero gas leakage. The trigger group is the excellent Geissele SSA Combat Trigger. The SSA provides an average 4.5lb pull weight.(2.5 lbs on the first stage and 2lb on the second stage).

Furniture

Base Model comes complete with A2 Rifle Stock and LaRue medium A-PEG™ Grip, A2 Flash Hider, plus two LaRue-made 20-round magazines.



www.rampartcorp.com


Weap

on S

ystems and

Accesso

ries

sureFire sCOut OFFset mOunt

The LT752 features LaRue's patented lock-ing speed-lever, which is infinitely adjust-able to any MIL-STD 1913 Picatinny rail. The LT752 is designed to interface with the Surefire M600B, M600C and M300A series Scout Lights, but not the series 620

lights, and comes complete with mounting hard-ware, QD adjust-ment wrench, vial of blue Loctite and instructions.

sureFire sCOut light lt272Replaces OEM SureFire Scout Light mount in minutes. Comes complete with Mount-ing hardware, QD adjustment wrench, vial of blue Locktite and Instructions.

qd pivOt mOunt-shOrt FOr aimpOint Or hensOldt magniFier lt755This magnifier mount will properly align with the following LaRue mounts LT659NV, LT660, and LT751.

qd pivOt mOunt tall, lt755The LT755 shown fits 30mm bodies, such as the Aimpoint 3X Magnifier. The mount is available by itself, or as a Aimpoint 3X combo special. Both Mounts and Combo packages come complete with QD adjustment wrench, vial of blue Locktite

and Instructions. LT755 will not work with the MAKO magnifiers due to the rib that runs around the outside diameter.

aimpOint miCrO mOunt lt660Our LT660 (for the T-1 and H-1) come in three different heights, and are precision-machined out of bar-stock aluminum and matt black anodized to provide a durable non-reflective surface finish. The locking LaRue Speed Lever provides outstanding

return to zero; the optic can be removed, and replaced, without loss of zero.

20 mOa psr sCOpe mOunt qdThe LT112 QD Scope Mount is designed for users that have a monolithic upper and need 20 MOA to save them some elevation. The ring spacing of 2.9” allows the mounting of the US Optics T-PAL scopes. The comes complete with spare

mounting screws with wrench, QD adjustment wrench and instructions. Available in 30mm or 34mm ring configurations.

pivOt mOunt FOr eOteCh 3X magniFier

The LT755-S-EO is designed to mount an EOTech 3x magnifier behind an EOTech with a 7mm riser installed. It places the centerline of the magnifier 1.75” above the top of the rail and is meant to be mounted to the flat top behind the optic

(note - won't work properly if placed on the raised rail section of an LT110 EOTech mount).

pvs-14 qd pivOt mOunt

Designed to mount behind LT-mounted Aimpoints (Comp M2, M3 and M4), the Pivot Mount places a PVS-14 in perfect, 1.725" centerline height-alignment, pro-viding proper cheek-weld. With durabil-ity and simplicity in-mind, this spring-ten-

sioned pivot mount has no buttons and no switches. Like all LaRue mounts, it is precision-ma-chined out of bar-stock aluminum and Type-III hard-coat anodized.

taCtiCal sniper target tg1LaRue Targets are made of the highest quality materials and are produced on computer numerically controlled (CNC) machinery that gives consistent high quality. The silhouette is 28 inches high, 32 inches wide and is made of 3/8 inch

steel plate that is hardened to 500 Brinnell. Silhouette plates are rated to accommodate 7.62mm NATO.

LaRue Tactical



www.rampartcorp.com


Wea

po

n S

yste

ms

and

Acc

esso

ries

Milkor South Africa

40mm mgl mk 1lThe Milkor 40mm Multiple Grenade Launcher Mark 1 L is a rugged, robust, shoulder fired 6-shot launcher that has been qualified according to Military Stan-dards. The MGL Mark 1 L has a lengthened 140mm chamber as opposed to the stan-dard 105mm chamber of the Mark 1S. The extra 35mm chamber area enables this weapon to fire a variety of ammunition for different applications. The effective range of the MGL Mark 1 L is 375 meters and 600m with specific extended range ammunition. All shots can be fired in rapid succession of 6 rounds in less than 3 sec-onds. The MGLMark 1 L is a semi-automatic weapon designed with simplicity to offer uncompromising reliability and efficiency.

The MGL Mark 1 L is ideally designed for use by Armed Forces where its extreme versatility can be used in combat or peace-keeping environments. The MGL Mark 1L is capable of firing a wide range of Lethal and Less Lethal munitions thus offering the bearer the ability to employ the use of rounds ideally suited for the specific situation, including Tear Gas and Rubber Baton rounds for crowd control, Grenade and Flash-bang rounds for combat situations and many more. The MGLMark 1 L enables the user to engage a wider range of targets than currently possible with a standard 40mm MGL.

37/38 Or 40mm stOpper The Millkor 37/38 or 40mm Stopper Convertible is an extremely lightweight single shot break-open weapon designed to give optimum performance utilizing a variety of 37/38 Less Lethal or 40mm Less Lethal and Lethal rounds. As a security or assault weapon, it can be fired from the shoulder or like a pistol out of the hand.

The weapon is extremely simple to operate and all metal surfaces are treated with a coating for corrosion protection plus long-life dry film lubrication. It is a conventional single shot, break-open weapon with a unique floating firing pin mechanism that ensures safety when accidently dropped. The components of the weapon are interchangeable, providing a wide range of applications rang-ing from Less Lethal 37/38mm to a 40mm Lethal weapon.



www.rampartcorp.com


Weap

on S

ystems and

Accesso

ries

FastMag™ Heavy

Another introduction to the FastMag™ line is the FastMag™ Heavy [FMH]. It is designed to accommodate most 7.62 x 51 ammunition magazines. The FMH follows the traditional design and features of the FastMag™ Gen.III and maintains the key performance charac-teristics including low profile and the enhanced urethane tension strap system. The FMH Accepts all FastMag™ variants (FastMag™ GEN.III & FastMag™ Pistol) for 'double-stacking'.

The FastMag™ Heavy Duty Belt is designed with an adjustable/re-movable belt slide that fits most belts including rigger and duty belts. The FMH Duty belt is also uniquely designed for 'double-stacking' by removing the adjust belt slide.

Fastmag gen iii ► The FASTMAG®; Gen III holds most 5.56mm/.223 ammunition

magazines. It reduces reloading cycle time for the operator ► Can be mounted in the up or down direction (operator’s

preference). The system eliminates the need for traditional top closures.

► While providing a secure point of access. The tension system is adjustable to meet the users preference for removal force.

► The mounting slots on the front allow operators to ‘double-stack’ or attach nylon accessory pouches using MALICE®; Clips, giving even more options for your kit setup.

Fastmag pistOl

The FastMag™ Pistol [FMP] is built from the same hi-strength, GhillieTEX™ IR reducing, anti-fragmentation polymer as the origi-nal FastMag™. Our new FMP reduces reloading time for the opera-tor and can be mounted in the up or down position. This system eliminates the need for traditional top closures, while providing a secure point of access. The enhanced urethane tension strap is adjustable to meet the users preference for removal tension. The FMP is also designed to 'double-stack' on all FastMag™ Gen III & FastMag™ Heavy.

The FastMag™ Pistol Duty Belt is designed with an adjustable/removable belt slide that fits most belts including rigger and duty belts. The FMP Duty belt is also uniquely designed for 'double-stacking' by remov-ing the adjust belt slide.

magBOOt gen ii The ITW Military Products MagBOOT is designed to provide en-hanced grip and stability for most 5.56mm/.223 magazines. Built tough, the MagBOOT provides slip resistant handling in tough environmental and gloved hand operations. It also provides a better base for unique firing situations. The Tan, Coyote Brown, Flat Dark Earth (FDE) and Foliage Green colors offer IR compliance to provide better signature management and the enhanced material provides a buffer for noise reduction.

ITW Military Products

Belt Version MOLLE Version



www.rampartcorp.com


Fire

Res

ista

nt C

loth

ing XGO Flame Retardant Clothing

Flame Retardant Clothing

Lightweight, moisture-wicking garment that has superior flame-retardant properties. Designed for use in warmer weather.

Combating the heat can be difficult when you’re in the middle of the action. The multi-phase Flame Retardant garments from XGO combine their lightweight, patented blend of Modacrylic and Rayon with superior flame-retardant properties to ensure protection and comfort. Through extensive NFPA testing, the ‘no-melt’ and ‘after-flame’ treatments have been shown to consistently exceed the industry standard. You will be kept cool as the moisture your body produces is quickly ushered to the garment exterior while the breathable fabric helps maintain your core temperature, and our unique Ag47 silver anti-microbial protection keeps you odor-free for extended wearability in endurance situations.

Product Features ► Lightweight First Layer ► Modacrylic / Rayon Blend ► Flame-Retardant Garment ► Superior Moisture-Wicking ► Ag47 Anti-Microbial Protection ► Won’t Shrink, Pick or Fade ► Durable and Breathable ► Extra Length

Flame Retardant Weights

Lightweight ► Phase 1 FR: 4.0 oz / sq yd ► Phase 1.5 FR: 5.0 oz / sq yd

Midweight ► Phase 2 FR: 6.0 oz / sq yd

Heavyweight ► Phase 4 FR: 8.0 oz / sq yd

► XGO’s technical base layers with Acclimate® Dry are designed to be the highest quality, most comfortable and best-performing layering systems for any climate or situation. Acclimate Dry fabrics offer superior wicking, breathability, and quick drying time.

► Acclimate® Dry perfomance fabrics wick and dissipate perspiration and moisture away from the skin—keeping the wearer dry and comfortable for extended periods of activity.

► Acclimate® FR is XGO’s patented, proprietary blend of high-performance, flame-retardant base layers. This FR treatment has inherent qualities which cannot be washed or worn out, and the Thermal Protective Performance values (after-flame, no-drip) exceed NFPA standards (ASTM D6413).

► All XGO flame-retardant garments breathe and wick moisture well, ensuring comfort is maintained during long periods of intense activity.



www.rampartcorp.com


Fire R

esistant Clo

thing

Carbon-X Base Layers

CarBOnX lightweight Base layer

The solution for balancing protection and comfort

Constructed using advanced patented technology, CarbonX lightweight base layer is the ideal solution for active wearers who want to keep comfortable even in potentially dangerous conditions. It is made from our TK-60 fabric, a lighter-weight, double jersey interlock knit comprised of a proprietary blend of high-performance fibers with an ad-ditional hydrophilic fiber to absorb and wick away moisture.

Unmatched protection: our TK-60 fabric never ignites, and it significantly outperforms competitive fabrics when subjected to direct flame, extreme heat, molten metal, hot/flammable liquids, or arc flash. even after intense exposure, our fabric maintains its in-tegrity and continues to protect. Comfortable protection: our TK-60 fabric is lightweight, soft-to-the-touch, flexible, and odor-resistant. it also breathes extremely well, wicks away moisture, and dries quickly.

Permanent protection: Because our TK-60 fabric is inherently flame resistant, laundering does not impact its protective properties. the thermal protection will not wash out or wear away, nor will the product shrink when exposed to direct flame or high heat. the carbonX lightweight base layer can be worn again and again, even under conditions of daily exposure.

Quest Fire Apparel

quest Fire apparel CarBOn-X hOOds Part Number: ULCBXH2E

84% Oxidized Polyacrylonitrile / 16% Para‐Aramide Technora

Design:

2 ply hood measuring 16.1" from the top of the face opening to the bottom in front, 19" from crown to bib seam in the back, 14.75" crown to the shoulder notch on the sides. Width is 9" from the top of the face opening to the back seam & 9.5" from the bottom of the face opening to the back seam. The width at the bottom of the hood is 10". The face opening is sewn with 3/8" Heavy Duty covered elastic and measures 5" relaxed/ 14" in the stretched condition. The hood is 2 ply through‐out and complies with the specifications outlined in NFPA 1971 latest edition.

Construction:

All seams are sewn with 100% Nomex thread and an 8 thread flatlock safety stitch is used for both durability and a comfortable flat "butt" seam.

Testing:

All testing is performed by Underwriters Laboratories in accordance with NFPA 1971 latest edition and our hoods meet all of the required specifications (including labels). Underwriters Laboratories also provides the quarterly testing and site visits to Carbon-X’s manufacturing on a continuing basis.



www.rampartcorp.com

Medical Equipment

Med

ical

Eq

uip

men

t Mystery Ranch Military & Tactical Packs

rapid aCCess trauma system

RATS (Rapid Access Trauma System) is the pack you need when every second counts. Its special “rip access” design gives the user the ability to have complete access to the load in a flash. With three large external pockets and six Velcro anchored rip out pockets ( 4 triage, 2 I.V.) with clear vinyl viewing windows this pack has everything you need to stay organized. The RATS pack also includes two trauma shears pockets; one external and one internal. It has the ability to be worn just as a simple ruck when traveling light but also has the necessary attachments to be mounted onto the NICE Frame giving a better harness for the user if they are carrying heavier loads.

WEIGHT: 6 lbs 5 oz (2.9kg)

DIMENSIONS: 19”x11”x7” (48cm x 28cm x 18cm)

FRAME SYSTEM: Futura

rOusThe ROUS Pack is the pack for when every second counts. Its special rip into design gives the user the ability to have complete access to the pack in a flash. The ROUS is made to carry a large medical load or a small medical load with extra room for a patrol or an overnight search. This specialized pack has a large lid, a detail pocket for administration needs, a large back pocket and two Rip Zip pockets so you can organize your instruments and gear. With six large Velcro anchored rip out triage pockets and two IV bag pockets with clear vinyl view-ing windows this pack has everything you need to separate sharps, bandages and gauze. The ROUS pack contains on our X Frame which is designed for ap-plications where both load hauling - up to 60 lbs. - and mobility are crucial. The mainframe is comprised of a full length .060 HDPE frame-sheet, overlaid by two crossed stays: fiberglass rods that run corner to corner, creating an “X.” The ROUS also has our BVS system for increased stability over body armor.

WEIGHT

Pack: 6lbs 10oz

Pockets: 1lb 9oz

Total: 8lbs 3oz

Additional Mystery Ranch products can be found on page 4 and 5



www.rampartcorp.com

Medical Equipment

Med

ical Eq

uipm

ent

Med Sled Rescue Sleds

med sled vl resCue

The Med Sled VL Rescue Sled gives you all the functionality of a conventional CA-SEVAC/Tactical Evacuation Care methods with a less complicated, more durable system, all for a better price.

Advantages ► Fast Deployment ► No assembly required ► Integrated Hoist System for quick lift-

ing (pre-assembled) ► Weighs less than 17 lbs. ► Utilizes High Density Polyethylene for

increased strength and durability ► 10,000 lb. rated perimeter tether

secures the war-fighter expediting the evac process

VL: Vertical Lift

med sled ms30 taCtiCal resCue

The Med Sled Tactical Rescue Sled is designed to leave no one behind. When every second counts, Med Sled is designed to be utilized for the rapid extraction of injured in all phases of Tactical Combat Casualty Care (TCCC)

Features ► Weighing only 6 lbs., Med Sled is

easily and rapidly deployable from or stowed in it’s compact carry bag

► Maximizes protection and safety to the inured during transport

► Med Sled is the most cost effective pa-tient transport device on the market

► Hand free tether around waist or shoulder allows for employment of weapons and other equipment by the rescuer



www.rampartcorp.com

Medical Equipment

Med

ical

Eq

uip

men

t

litter Carrier el3000 militaryFor transporting stretchers and patients in unsurfaced areas

NSN 6530-01-591-9636

Joint Product of Choice (JPOC) for Wheeled Litter Carrier as deemed by the Defense Medical Material Program Office (DMMPO)

The Litter Carrier is a light, stable device, equipped with two large non-pneumatic wheels designed for transporting injured persons on rugged terrain. These flat-free tires keep the unit mobile at all times, without the need for a pneumatic pump.

When the supporting legs are in the transport position the patient is easily moved by one or two persons. When the supporting legs are in the “static” position the litter carrier is a steady and stable support for the patient.

When not in use, the Litter Carrier is easily folded to a compact size for storage.

The EL3000 Military Litter Carrier has proved very useful for transporting and moving injured patients (or materials) inside field hospitals and field hospital areas, AMPs, or to provide access to helicopter pads or airlift areas in typical large-scale emergency or natural disaster scenarios.

FareTec -Wheeled Litter Carrier EL3000 MILITARY, Part # 2221030.

FareTec Litter Carrier



www.rampartcorp.com

Medical Equipment

Med

ical Eq

uipm

ent

Persys Medical - Survival Blankets

Blizzard survival Blankets The Blizzard Survival brand and its exclusive Reflexcell Technol-ogy have become the new standard in thermal protection for the military, emergency preparedness, law enforcement, outdoor sports, casualty care, disaster relief, medical treatment, and more. This radical new technology provides maximum warmth, reduces symptoms/signs of shock, and guards against the risk of hypothermia in the most compact of packages.

Available as: Survival bag, blanket, vest, tube, SPR blanket

Blizzard heat Casualty Blanket

Blizzard Heat Casualty Blanket is the new standard in hypother-mia prevention for casualties. This extra-large blanket wraps around a casualty and seals with hook-and-loop fasteners. Bliz-zard Heat includes four oxygen-activated heating pads, placed inside, which provide effective warming during CASEVAC. This blanket accommodates all patient sizes.

pOCket Bag valve mask - BvmThe World’s First collapsible pocket BVM… in the palm of your hand!

The Pocket BVM™ (Bag Valve Mask) is a hand-held disposable device for manual resuscitation and emergency respiratory support for adult patients. This device is designed for one-time patient use; however it can be re-folded for training purposes. It is ideal in either emergency or clinical settings and replaces any standard BVM combining all components and operational capabilities into one compact unit.

The Pocket BVM is easy to use, prevents operational fatigue, requires minimum pressure to be compressed and, due to its design, quickly recovers its shape. The Pocket BVM Manual Resuscitator enhances performance and reliability. All equipment complies with the safety standards.

► Fits in the Palm of Your Hand ► Quick and Easy to Deploy ► Medical Grade Silicon ► Single Use

MicroBVM



www.rampartcorp.com

Medical Equipment

Med

ical

Eq

uip

men

t

military emergenCy tOurniquet™ (met™) - generatiOn iii With nearly a decade of ground combat underway, advances in battlefield medical technology have led to the greatest casualty survival rates in the history of modern warfare. Tier-One Quality Solutions is honored to continue its support of the Warfighter with the introduction of a third generation combat tourniquet, the Military Emergency Tourniquet® - GEN III.

Backed with over seven years of combat application, the design enhancement of the MET - GEN III incorporates evidence based clinical recommendations, state of the art technologies and end user response, making it the industry’s most reliable and effec-tive tourniquet device available to those going into harms way.

Characteristics: ► 2.25” Tourniquet Base ► 40” x 1.5” Constricting Band ► Heavy Weight Denier Nylon ► Powder Coated Aluminum Windlass

Tier-One Quality Solutions - Medical Tourniquet

SWAT-T Tourniquet

The SWAT-Tourniquet™ is a unique and multipurpose dressing. Its name provides a description for usage Stretch, Wrap, and Tuck, but also the communities for whom it was developed - military and civilian Special Weapons and Tactics teams.

The SWAT-Tourniquet™ allows a more rapid means to control extremity bleeding and allows application higher into the groin and axilla than other tourniquets. Its ease of application is one of its greatest benefits; individuals can effectively apply it in seconds with little to no prior training. At a third of the cost and weight of other combat used tourniquets, this tourniquet should find its way forward with every tactical operator.



www.rampartcorp.com

Medical Equipment

Med

ical Eq

uipm

ent

emergenCy Bandage

The Emergency Bandage is the combat proven bandage of choice for U.S. and international military units. This life-saving bandage is the ideal solution for emergency treatment when every second counts. It is an innovative device that staunches blood flow for hemorrhagic wounds in emergency situations.

► Secure, water-resistant pressure applicator and closure bar ► Immediate direct pressure ► Quick and easy self-application ► Vacuum-sealed packaging ► Significant time, space, and cost savings ► Versatile and X-Ray friendly

Available in: ► 4” pad ► 6” pad ► 6” mobile pad ► 4” mobile pad ► Abdominal pad

Persys Medical

MedMat® is a two layer system providing the clinician with the appropriate surfaces to apply aseptic non touch techniques dur-ing the different stages of the procedure, separating the ‘dirty’ from the ‘clean’ elements of the process.

medmat 700MedMat® 700 covers a surface equivalent to a standard hospital trolley and is suitable for procedures creating a small to medium quantity of waste.

medmat 1100MedMat® 1100 covers a surface equivalent to the width and a third of the length of a standard hospital bed. The large integral waste bag is suitable for procedures creating a medium to large volume of waste.

Features

► 2 layers to separate application stages of a procedure ► Absorbent top layer to capture fluids ► Adhesive strip to secure the MedMat® to the work surface ► Integrated sealable waste bag for containing all non sharp

waste created by the procedure ► Latex free

MedMat Dual Layer Sterile Treatment Platform



www.rampartcorp.com

nOtes

®

®

RAMPART Catalog 2012

Documents

Transcript of RAMPART Catalog 2012