Rainscreen Cladding Accessories - Cladding Extrusions ... framing...Hi-Spec is a leading structural...

Rainscreen Cladding Accessories

w w w . p l a s t e s t r i p . c o m

3

Page

FastFrame information 4 - 10

FastFrame NBS spec 11Fastframe checklist 12

FastFrame calculations return sheet 13FastFrame installation guide 14 - 17

Take off & assembly drawings 18 - 19Standard ancillary products 20 - 21

Contact us 23

Contents

5

is an adjustable cladding fixing system that suits most brands of exterior cladding panels. We can offer an in house technical service to calculate the safest yet most economical bracket spacings to support your facade. Save time and money by completing the checklist.

• 2 - 3 day in-house calculations specific to every application.

• FastFrame is available from a UK distribution network and is usually available ex-stock for overnight delivery.

• Compatible with all common façade finishes, including HPL, cement based sheets, ACM, stone panels, render systems and timber.

• The adjustable, universal bracket, made from 5000 structural grade aluminiums comes complete with an isolation clip and is suitable for most building substrates.

• The T & L rails are made from high specification 6063 T6 grade aluminium.

• On-site pull out tests by trained technicians.

• Fully backed by an independent structural engineer offering PI cover.

6

FastFrame systems details

FastFrame is a division of Plastestrip, itself part of the global Amari group and a market leader in the manufacture and supply of PVC and aluminium extrusions and cladding systems to the construction industry. Founded in 1959, Plastestrip has been based in St Austell for the last 40 years and still has family connections working within the company. Customer service is a critical element of Plastestrips’ mission statement and it has achieved continued growth by exceeding its customers’ demands. Always aware of its customer’s needs, Plastestrip is constantly involved in the innovation of new solutions to customers’ problems. High calibre products, available on time and at the right price, has been the company’s guiding ethos from the outset and remains so today. Plastestrip has a philosophy

of continuous improvement in its products and their manufacture, maximising the benefits to customer and end user alike. The business has been built through on-going relationships with its customers and partners. Plastestrip believes that business is done between people – not between companies and strives to deliver added value through strategic technical and marketing services in addition to quality products along with the timely deliveries they have come to expect. Quality is in the detail at Plastestrip and it has always gone above and beyond accepted standards to bring its customers the benefits of products and materials that stand the test of time. Plastestrip incorporates dozens of innovations into its products, many of which cannot be seen, yet which put its products at the leading edge of the industry.

Plastestrip’s principal partnerships are with its customers, but in order to provide them with the best products and services, Plastestrip also partners with only the most reliable suppliers.The FastFrame solution has been developed in close consultation with these partners, end-users and specialist cladding contractors.

● Hi-Spec is a leading structural engineering company specialising in rain-screen cladding solutions and worked closely with the Plastestrip design team on the development of the FastFrame system.

● EJOT is one of the world’s most prominent and reliable manufacturers of fastener and anchor systems. Anchoring the framing to the building structure is a critical aspect of any cladding system and to this end Plastestrip has partnered with leading fastener manufacture, EJOT Fastener Systems.

● Sika is the global leader for one-part polyurethane based sealants and elastic adhesives and offers a wide range of solutions for sealing and bonding. Plastestrip acknowledge the quality and reliability of Sika structural adhesive systems for bonding cladding panels to the FastFrame façade support system.

The FastFrame solution offers a multitude of benefits not found in other systems, speeding installation and by doing so, offering a more reliable, cost-reduced façade support system. The FastFrame component bracket also resolves issues with other current rail and bracket aluminium framing systems. The unique design of the three-part folded aluminium bracket features a base leg much thicker than the thickness of the stalk leg. As the performance of the bracket is directly related to the thickness of its base leg, this ensures that FastFrame brackets can easily withstand the total stresses placed upon it by its own weight, the forces of the wind and the weight of the façade.

Isolation of the bracket from the building substructure is essential, both for thermal and long term reliability purposes. Without a form of inert material between the aluminium bracket and the building, corrosion will eventually occur, weakening the framing and shortening the life of the installation. This aspect is not to be underestimated as the failure of corroded brackets could result in a disastrous failure of the whole façade. By incorporating a to ugh integral PVC clip to secure the ‘L’ piece and the base plate together, this essential isolation barrier cannot be inadvertently omitted, while at the same time speeding installation.

The design of the highly efficient FastFrame bracket also yields long term environmental benefits, contributing to meeting Building Regulation Part ‘L’ by limiting heat conduction away from the building and lowering heating costs. A further benefit of the stronger isolated bracket is that it facilitates wider spanning and, in many cases, a reduction in the number of brackets required to secure the façade. This brings significant savings in terms of materials and particularly in installation time.

The Company

Associates

Benefits of the FastFrame system

6 7

FastFrame systems details

Depending on the weight and dimensions of the cladding panels to be attached to the frame and the calculated wind loading, a combination of single and double brackets may be employed. 10 bracket sizes from 65mm to 240mm are available, covering cavities from 80 to 280mm.The brackets are universal for both fixed point and floating point rail support and all forms of brick, block-work, concrete, masonry, timber and light steel frame (LSF). A bespoke design service is offered where the customer needs to dictate a non-standard bracket size.

This low component count enables Plastestrip to hold extensive stocks, ensuring prompt delivery to site and eliminating costly delays while the installation team await materials.

The FastFrame system comprises only three main components

● Precision engineered from 3mm structural grade aluminium to 3mm 5000 structural grade aluminium

● Suitable for fixing to brick, block work, concrete. LSF, masonry and timber

● Designed for fixed and floating point

● Integral isolation pad of heat stabilised, high rigidity PVC

● Integral rail location clip to aid initial positioning.

● Standard sizes 65mm to 240mm – bespoke sizes available to order

● Bracket adjustability 25mm for the 65mm bracket and 32mm for all other sizes

● Tensile strength 220 – 240 N/mm2

● Unique three-part design offers superior performance and wider spanning

● Engineered from 2mm high specification 6063 T6 aluminium

● Only T & L section rails necessary

● Rails supplied in lengths of 6 metres

● Thicker low-deflection bespoke rails available on request

Any cladding system is only as good as the fastening system securing it to the building substrate. Plastestrip stock many fastening systems of top grade stainless steel for superior strength and endurance.

● Superior long-life stainless steel fastenings

● Fixings for bracket to rail, steel and wood are A2 stainless steel with an 8mm hex head

● Fixings for bracket to blockwork, brick and concrete are A4 stainless steel with a 13mm hex head

● Bi-metal fixings are hardened carbon steel drill point case hardened

Bracket component propertiesMaterial 3mm 5000 grade aluminium

Tensile strength 200 - 240N/mm2

Yeild strength 170N/mm2 min (approx. only)

Shear strength 125 N/mm2

Elongation 4 - 8%

Brincell hardness 60HB

Thermal conductivity 149 W/m.k

Electrical conductivity 39.4%

Coefficient of thermal expansion 23.5 x 10 -6 1K

Elastic modulas 70000MPa

Rail propertiesMaterial 2mm 6063 T6 grade aluminium

Standard Complies to BS:1474

Tolerance Complies to BS EN-755-9

Chemical composition BS EN573-3:2003

FastFrame Universal Brackets

FastFrame system Components

Fast Frame Rails

Fasteners

8

FastFrame system components

Reference Minimum standoff Maximum standoff

FF FIX/BRD/65 80mm 105mm










Bespoke sizes also available

Reference Minimum standoff Maximum standoff

FF FIX/BR/65 80mm 105mm










Bespoke sizes also available

Single helping hand brackets

Double helping hand brackets

98

FastFrame system components

Bracket to steel stud anchor

Angle rail

PCF/44/4.8x19 - Rail to bracket stitching screw

Bracket to masonry anchorBracket to timber stud anchor

Tee rail

Material Reference Description For fixing

Stainless steel with carbon steel drill point

PCF/3BT2/6x46 50mm bi-metal anchor for steel, 100 per box FastFrame brackets to steel stud

JT3-2-6.5x50 50mm bi-metal anchor for timber, 100 per box FastFrame brackets to timber stud

JT3-2-6.5x80 80mm bi-metal anchor for timber, 100 per box FastFrame brackets to timber stud

Stainless steel SDF-KB-10Vx60E 60mm anchor for masonry, 100 per box FastFrame brackets to concrete / masonry

Other anchor types available, call 01726 74771 for more details.

Material Reference Description Suitable for

6063 T6 aluminium

FIX/ANG/HD/60/40 40mm faced angle with 60mm leg, 3m or 6m lengths Intermediate panel supports

FIX/TEE/HD/100/60 100mm faced tee rail with 60mm leg, 3m or 6m lengths Vertical joint supports

FIX/TEE/HD/125/40 125mm faced tee rail with 40mm leg, 3m or 6m lengths Vertical joint supports for small cavities

Material Reference Description For fixing

Stainless steel with carbon steel drill point

PCF/44/4.8x19 19mm bi-metal tech screw, 100 per box FastFrame rails onto FastFrame brackets

JT4-6-5.5x22 A14 22mm bi-metal tech screw, 100 per box FastFrame FF200 horizontal carrier rails onto FastFrame vertical rails

Bracket to substrate anchors

Carrier rails

Stitching screws

11

NBS Spec – FastFrame

H92 Rainscreen Cladding120 Rainscreen Cladding

Secondary support / framing system

Manufacturer:Plastestrip, 1 Enterprise Park, St Austell, Cornwall, PL25 4EJ

Tel: 01726 74771, Fax 01726 69238. www.plastestrip.com

Product references:

FastFrame system

Ref

Brackets & Rails

Single bracketFF FIX/BR/*(*standard sizes available 65, 80, 100, 120, 140, 160, 180, 200, 220, 240) Bespoke sizes also available.

Double bracketFF FIX/BRD/*(*standard sizes available 65, 80, 100, 120, 140, 160, 180, 200, 220, 240) Bespoke sizes also available.

Intermediate angle rail FIX/ANG/HD/60/40

Joining tee rail FIX/TEE/HD/100/60

Material

Aluminium to BS EN-755-9 & BS EN-573-3:2003

FastenersBracket to rail fixing (A2 304) PCF/44/4.8X19Bracket to masonry fixing (A4 316) SDF-KB-10Vx60EBracket to steel fixing (A2 304) PCF/3BT2/6X45Bracket to timber fixing (A2 304) JT3-2-6.5X65

Number and location of fasteners: Consult with the issued FastFrame Return Sheet for number and type of brackets to be used.

NOTES:

This is a generic spec only. Submit a FastFrame Checklist from www.plastestrip.com to: [email protected]

H92 NBS spec

12

Project checklist The data on this sheet will be used to calculate the maximum bracket centres for this project.

If any data is inaccurate, the outcome of our calculations will also be inaccurate.

Critical Information To work out bracket centres the blue section must be filled out

Date: 1/1/17 Your name: Joe Bloggs Phone number: 07777777777

Your company: Claddings Inc Your email: [email protected]

Project name: Large tower block Project town or postcode: SW1A 1AA

Cladding panel: Sample panel Panel thickness: 8mm

Building height: 50 m Installation type: Façade Soffit Brackets will be attached to:

Steel stud Structural timber Concrete / Masonry Other:

Panel fixing method: Rivets/Screw Adhesive system Mechanical secret fix using C rail hanger system Other:

Insulation thickness: 60mm Airgap: 60mm Total cavity size (Insulation + airgap): 120mm *Please note that if the airgap is smaller than 60mm then the rails may need to be cut in to the insulation and may affect uvalues.

I have an elevation drawing showing the panel layout (Please return with this Checklist). No panel layout is available, please assume panel size is: Width: mm x Height: mm

Additional Information Details below will be estimated unless specified - Estimated values MUST be verified before installation

Contractor: Can we contact the contractor for additional info?

Yes: No: Contact me first

Contractor Tel: Contact Email:

Cladding panel details You can get these details from your cladding panel manufacturer.

Panel weight: 8.4kg/m2 Cladding Area: 3200m2

Maximum allowable deflection ratio:L/200 Maximum allowable fixing centres – Single spans: 600mm Maximum allowable fixing centres – Multiple spans: 600mm Maximum desired vertical rail centres: mm

Project data Wind load data can be obtained from your project’s structural engineer or through independent testing

Storey height: 3m

Maximum design wind loads Maximum suction: -0.58kN/m2 Maximum pressure: 0.44kN/m2

Substructure condition These details will have to come from the manufacturers of the substructure or independent testing Pull out tests can be arranged for large projects on request.

Steel - Manufacturer: Min Strength: 350 N/mm2 Min Gauge: 1.5 mm

Timber – Min Size: Min Grade: Max Steel/Timber spacing: 600 mm Steel/Timber runs: Vertically Horizontally

Concrete Block Brick - Solid or Hollow

Min Strength/Grade: N/mm2 Min Thickness: mm

Will the substructure align with the vertical panel joints? Yes: No: Thickness of sheathing board, ply, render, etc used on top of the substructure: 12mm

Schedule Planning: Offer: Installation: Order to place: Project start date: 1/12/17

Notes

t. 01726 74771 www.plastestrip.com [email protected]

12 13

Brackets required

1 1 1 1

Legend

Static calculationsProject ref:

Building

All areas

-0.58kN/m²

Project name:DEM010117

Demonstration project

20m

3.000m

Building height:

Storey height:

Date:

Max rail centres:

Cavity:

Insulation thickness:

Bracket size:

01/01/2017Frame

Fixing method:

600mm

1200mm

H

G500mm

H

3.4 - 4.6m raill

Tee rail reference:

Bracket to substrate fixing:Sample panel

3 -0.44kN

FF FIX/BR/100

FF FIX/BRD/100

Single bracket reference:

Double bracket reference:

4l

B

G600mm

HFor rails between Suction G

120mm

60mm

For rails between4.6 - 6m rail

Zone:

Max wind suction:

Max wind pressure

Installation:

Substrate: Steel

1.5mm

0.44kN/m²

Vertical façade

Substrate thickness:

Supporting structure

Rail back leg length:

System weight:

Panel manufacturer:

1.40kN

Panel thickness:

Panel weight:

Panel Deflection:

A

G

GB B

BSuction

G

B

C

-0.35kN

G-0.39kN

1200mm

B H

Suction G-0.53kN

H

500mm

G500mm

-0.39kN

l2

For rails between2 - 3.4m rail

Suction

- Fixed single bracket

- Floating single bracket

- Fixed double bracket

HG

HG

1000mm

Suction

Suction

l0m - 2m railFor rails between

1

500mm

B

A

-0.35kN

H

1200mm

H

A

BSuction

0.39kN

H600mm F 600mm

B

-0.46kN

1200mm

500mm

H

-0.39kN

Rail & bracket centres can be reduced but not increased. Reduce cantilever, before reducing bracket centres. Have your substructure checked by a qualified engineer to ensure itcan support the FastFrame system support systems that are exposed to increased potential for corrosion can be anodised for added protection. Contact Plastestrip for more details.

600mm

HH

0.22kN

600mm

H H HEEFF E

0.13kN

Suction G-0.48kN

-0.39kN

500mm

HSuction G

1200mm

HSuction G-0.44kN

Suction G

B

B H

Suction G-0.48kN

1200mm

HSuction G-0.44kN

1200mm

Suction G-0.46kN

1200mm

H

A

1200mm

H

C

0.30kNDead load Dead load Dead load Dead load

Max admissible load on primary anchor:

S350GD+ZSteel grade:

100mm

60mm

2.51kg/m²

Panel

Rivet / Adhesive

Rails requiredFIX/ANG/HD/60/40

FIX/TEE/HD/100/60

Fixings requiredPCF/3BT2/6X45

PCF/44/4.8x19

Angle rail referance:

Bracket to rail stitcher:8mm

8.40kg/m²

L/200

[email protected] www.plastestrip.com Page 1 of 1

14

Installation guide

To ensure correct bracket spacing, size and correct fi xings, a FastFrame Project Checklist must be completed and sent to Plastestrip Profi les for calculations.

The project calculations based on the checklist you submit will determine the layout of the single and/or double brackets. Single & double brackets achieve a 80 - 280mm standoff as standard, other sizes are possible and made bespoke. Stand off s greater than 300mm require aditional cross bracing and we do not advise having a stand off of greater than 400mm unless being used in a soffi t application.

The FastFrame bracket is a unique, three part component which, by design, allows much greater fi xing centres and therefore, will become more cost eff ective per metre square than a weaker bracket.

Stand off s of 70 - 80mm are possible using a 40mm leg T rail and the 40mm leg of the angle rail. This must be calculated for as the short back leg reduces the strength of the spanning rails. Unless otherwise stated, the rails mentioned on the returns sheet are the only ones that have been calculated for.

The return sheet you are issued with gives the maximum bracket centres achievable based on the information you have fi lled in on the checklist. If any values are marked up in red on the checklist or returns sheet then these values have been assumed by Plastestrip and must be verifi ed by the installer / client before installation. Failure to check these values may aff ect your warranty.

General rules of installation:• Spans, vertical centres & cantilevers must never be

greater than those on your returns sheet.• A cantilever must never be more than the calculations

specify or 50% of the span it is adjacent to, whichever is smaller.

• Rails must always be installed vertically. • All fi xings must be stainless steel and as specifi ed in the

calculations returns sheet.

Single bracket reference

Double bracket reference Potential standoff

FF FIX/BR/65 FF FIX/BRD/65 80 - 105mmFF FIX/BR/80 FF FIX/BRD/80 88 - 120mmFF FIX/BR/100 FF FIX/BRD/100 108 - 140mmFF FIX/BR/120 FF FIX/BRD/120 128 - 160mmFF FIX/BR/140 FF FIX/BRD/140 148 - 180mmFF FIX/BR/160 FF FIX/BRD/160 168 - 200mmFF FIX/BR/180 FF FIX/BRD/180 188 - 220mmFF FIX/BR/200 FF FIX/BRD/200 208 - 240mmFF FIX/BR/220 FF FIX/BRD/220 228 - 260mmFF FIX/BR/240 FF FIX/BRD/240 248 - 280mm

Other bespoke sizes also available

t. 01726 74771 [email protected]

SAM

PLE

Installation guide

14 15

Installation guide


When fi xing FastFrame brackets into concrete, a pull out test must be performed to verify the strength of the masonry. All drill holes should be thoroughly cleaned out and free from dust and grit before fi xings are inserted.

When fi xing FastFrame brackets into concrete, ensure the fi xings are placed in the larger elongated holes with the collar of the frame anchor plug on the face of the bracket.

When fi xing FastFrame brackets onto steel or timber substrates, please ensure there are 2 fastners per single bracket or 4 per double bracket and that they are placed in the smaller 6.5mm holes.

When fi xing to timber studs, always ensure that a pull out test is performed to confi rm the strength of the material.

Always ensure that brackets are fi xed through any shiething panels and in to a structural steel or timber stud. It not possible to fi x brackets on to cement board, OSB or thin ply alone. Thicker plys like 18mm WBP or 25mm WBP are acceptable providing they are deemed as structural and calculated for.

We can off er a simple solution when the brackets need to be installed between the studs. A horizontal steel tophat can be used to create a structural mounting surface to fi x the brackets on to.

Use:• ST/TH/30/30/100 to mount single brackets on • ST/TH/30/30/185 to mount double brackets on

When fi xing to masonry or concrete substrates

When fi xing to steel or timber substrates

If the panels joints do not line up with the stud

Installation

16

Installation guide


Fixed point bracketThe PCF/4/4.8x19 bracket to rail fi xings are positioned at the bottom of the slotted holes to take the vertical deadload of the rail as well as the windload.

Tee railsWhere vertical joints occur within the cladding facade a Tee Rail should be inserted into the bracket clip.

Fixing to rail faceWhen fi xing to the rail faces, always ensure that you have at least 2x the thickness of the fi xing (or 10mm, whichever is greater) between the fi xing centrepoint and the leg or edge of the rail (dim A). There must be at least 3x the thickness (or 15mm, whichever is greater) between the fi xing and the bottom of the rail (dim B).

An individual rail will usually have only one fi xed point bracket and the rest will be fl oating to allow for expansion. Consult your calculations return sheet for the locations of the fi xed and fl oating point brackets on each rail length range.

RAILS MUST ALWAYS BE INSTALLED VERTICALLY!

EVERY SLOTTED HOLE ON THE OUTSTANDING LEG SHOULD BE USED WHEN FIXING RAILS INTO BRACKETS. NO HOLES SHOULD BE LEFT EMPTY.

Floating point bracketsThe PCF/4/4.8x19 bracket to rail fi xings are positioned in the middle of the slotted holes to allow the rails to expand and contract. These brackets only take wind load and minimal deadload.

Angle / L railsWhere intermediate panel support is required, insert an Angle Rail. Adjust where necessary.

Fixed or fl oating point brackets?

Tee rails & L rails

Installation guide

16 17

Installation guide


CantileversWhen you recieve your bracket spacings back from us, they will dictate how much the rail can sail past the bracket unsupported.There MUST ALWAYS be a 10mm gap between rails going up the facade. Panels MUST NEVER span over rail joints. Support rails SHOULD NEVER span over the buildings movement joints unless specifi cally engineered to do so.

Rail joiningIf you wish to join a rail to use off cuts then this is ok providing you do the following:• Use a 200mm joining piece of FIX/ANG/HD/60/40.• Use 8 stitching screws, 4 in each side.• All screws must be at least 15mm from any rail edge.• There must be at least 2 brackets each side of the join on

the rail being joined.

The insulation does not interfere with the rails or fi xings.

It is ideal if the airgap between the insulation and the face of the rails is greater than 60mm. This means that the rails will not interfere with the insulation. If the airgap is smaller than 60mm then the rails may have to be cut into the insualtion. It is up to the installer to check if this aff ects the u-values or if it is permitted by the specifi cation.

The insulation will have to be cut away to allow the leg of the rails to be fi tted but will not aff ect the fi xing of the rail to the bracket.

The insulation will have to be cut away to allow the leg of the rails to be fi tted and the rail to bracket fi xing is under the surface of the insulation making it very hard to fi t.

All stand off s greater than 300mm should be cross braced as per the detail shown here. This needs to be on the top and bottom bracket of one rail every 3m going across the facade.

As a guide, for a wall 3m high and 12m wide you will require and extra 20 x 65mm brackets and a 10 x short lengths of angle rail to brace.

An individual rail will usually have only one fi xed point bracket and the rest will be fl oating to allow for expansion. Consult your calculations return sheet for the locations of the fi xed and fl oating point brackets on each rail length range.

Cantilevers & rail joining

Insulation with framing systems

Cross bracing for large a cavity

This drawing remains the property of Plastestrip Profiles, St Austell

GJLDrawn by

REF: INSERT REF HERE

02/02/2016Date

cross bracing.dwg

Material: INSERT MATERIAL HERE

Filename1:8

EditionONE

Sheet1/1

Dimensions in mmScale

Typical detailALL COPYRIGHTS RESERVED

A DIVISION OF AMARI PLASTICS PLC

PROFILES

Length ofL rail

FF FIX/BR/65for bracing

FF FIX/BR/65fixed to bracket

Installation

18

7

8 PCF/44/4.8X19 A14 BOX19mm rail to bracket fixing with washer, box of 100

Item code

Description

PCF/3BT2/6X45 W15 BOXBracket to 1.2 - 2mm steel, max build up 22mm, 6x45mm inc

washer, 100 in a box

Units

box of 100

box of 100

Quantity per m²

300

375

*All prices quoted are nett. and do not include VAT. Carriage surcharges may be passed on at cost. Please check at time of order regarding leadtimes of components. Support

systems that are exposed to increased potential for corrosion can be anodised for added protection. Contact plastestrip for more details

www.plastestrip.com

Plastestrip Profiles - 1-4 Enterprise Park, St Austell, Cornwall, UK. PL25 4EJ

T.01726 74771

F.01726 [email protected]

72.10m

1.29kPa

-1.64kPaQuantity per

m²

1

2

3

4

5

6

Enquiry name: Sample project

Enquiry ref:

Quoted area:

Enquirer:

AN1000001 v1Budget usage per m²

Offer date:

Term of dispatch:

Your phone:

Your fax:

by truck

Delivery condition: ex works

Offer expires: Project assumptions

Your email:

Thank you for your enquiry.

The enclosed terms and conditions govern our deliveries and other

performances. Terms & conditions available on request. Any

conditions of purchase of the purchaser will only be binding upon

either Allface or Plastestrip if we expressly recognise them in

writing in individual cases. As far as not expressly marked binding,

offers are non-binding.

John Doe - Cladding Panels Ltd

27/03/2017

26/04/2017

Cladding material: Sample panel

Notes:

Allface fixing system: F1.10Building height:

Substrate: Vert Steel, 1.2mmWind pressure:

Permissible anchor pullout:

1.00kNWind suction general

areas (assumed):

Cladding zone: 190mm

Wind suction corner

areas (assumed):

Accessories

Description

Units

F1.170D6,5x2Single Allface helping hand bracket, 2 fixing holes 22/6,5mm,

depth 170mm

I+F1

Insulator pad, suitable for bracket AF F1+, dimension:

65x175x5mm, material: PVC

The figures per m² below are results of calculations on partial elevations and does not include items above. The overall figures may vary by +/- 10%.

Item code

Description

I.F1x2

Insulator pad, suitable for bracket AF F1, dimension:

65x90x5mm, material: PVC, 2 hole

Units

piece

piece

piece

Quantity per m²

11250

11250

3750

A-T10006020T-profile 100/60/2,0mm, length 6.000mm

F1+170D6,5

Double Allface helping hand bracket, 2 fixing holes 22/6,5mm,

depth 170mm

A-L04006020L-profile 40/60/2,0mm, length 6.000mm

piece

linear metre

linear metre

3750

9250

2250

*All prices quoted are nett. and do not include VAT. Carriage surcharges may be passed on at cost. Please check at time of order regarding leadtimes of components. Support

systems that are exposed to increased potential for corrosion can be anodised for added protection. Contact plastestrip for more details

www.plastestrip.comPlastestrip Profiles - 1-4 Enterprise Park, St Austell, Cornwall, UK. PL25 4EJ

T.01726 74771 F.01726 69238 [email protected]

We can also offer full take offs based on your project drawings. We will first offer a metre square rate on a small indicative area of the project and if that is accepted and a partial order is placed, we can then work out how many of each component is required for the whole building based on your *cad drawings.

* In order for us to do the take off, we must have the final panel layout drawings in .dwg format along with any elevations detailing substrate design and location (also required in dwg).

Full component take off

18 19

As well as the take off, we can also draw a layout of the brackets and rails on to your **elevations showing you where each and every component goes in a easy to read drawing that can be printed out and given to the installers on site.

** In order for us to do the layout drawings, we must have the final panel layout drawings in .dwg format along with any elevations detailing substrate design and location (also required in dwg).

Assembly drawings

20

Standard Ancillary Products

By Plastestrip Profiles

External box corner

Shiplap external corner

Birds beak

Edge fi nishing profi le

External arrow head corner

F type internal corner

Horizontal chair profi le

Vertical joint profi le


ALL COPYRIGHTS RESERVED

GJLDrawn by

REF: AL/18P

05/11/2015Date

al18.dwg

Material: 6063 T6 Aluminium

Filename1:1

EditionONE

Sheet1/1


A DIVISION OF AMARI PLASTICS PLCPROFILES Typical detail

Please note , when we colourcoat our profiles, only visiblefaces (as shown in this detail)are covered.If you wish to usethe profile in a different way,please let our sales teamknow when you order so wecan coat the correct faces foryour installation. Thanks



GJLDrawn by

REF: AL/333P

02/08/2013Date

al333.dwg

Material: 6063 T6 grade Aluminium

Filename1:1

EditionONE

Sheet1/1



Please note , when we colourcoat our profiles, only visiblefaces (as shown in this detail)are covered.If you wish to usethe profile in a different way,please let our sales teamknow when you order so wecan coat the correct faces foryour installation. Thanks


GJLDrawn by

REF: AL/TP6

25/02/2016

Date

altp6.dwg


Filename

1:1

Edition

ONESheet

1/1

Dimensions in mm

Scale

Typical detailALL COPYRIGHTS RESERVED


PROFILES


GJLDrawn by

REF: AL/EX8

18/03/2013Date

alex8.dwg


Filename1:1

EditionONE

Sheet1/1


Typical detailA division of Amari Plastics plc

Please note , when wecolour coat our profiles, onlyvisible faces (as shown inthis detail) are covered.If youwish to use the profile in adifferent way, please let oursales team know when youorder so we can coat thecorrect faces for yourinstallation. Thanks



GJLDrawn by

REF: AL/EF8

05/08/2013Date

alef8.dwg


Filename###

EditionONE

Sheet1/1



Please inform our sales teamwhen you order this profilewhich format you are using itin so we can coat the correctside. Thanks

Internal corner


GJLDrawn by

REF: AL/CH8

25/11/2013Date

alch8.dwg


Filename1:1

EditionONE

Sheet1/1




Ref Description Colours

AL/16 For 6mm panels, 3055mm lengthsAvailable in any

colour*setup costs may apply

AL/18 For 8mm panels, 3055mm lengths

AL/110 For 10mm panels, 3055mm lengths


AL/333 For shiplap systems, 3055mm lengthsAvailable in any



AL/TP6For any panel,

can be used as a horizontal or vertical trim, 3055mm lengths

Available in any colour

*setup costs may apply


AL/76P Edge fi nishing trim for 6mm panelsAvailable in any


AL/78P Edge fi nishing trim for 8mm panels

AL/710P Edge fi nishing trim for 10mm panels


AL/66P Vertical joint trim for 6mm panelsAvailable in any


AL/68P Vertical joint trim for 8mm panels

AL/610P Vertical joint trim for 10mm panels


AL/EX6 For 6mm panels, 3055mm lengthsAvailable in any


AL/EX8 For 8mm panels, 3055mm lengths

AL/EX10 For 10mm panels, 3055mm lengths


AL/EF6 For 6mm panels, 3055mm lengthsAvailable in any


AL/EF8 For 8mm panels, 3055mm lengths

AL/EF10 For 10mm panels, 3055mm lengths


AL/CH6 Chair profi le for 6mm panel, 3055mm lengthsAvailable in any


AL/CH8 Chair profi le for 8mm panel, 3055mm lengths

AL/CH10 Chair profi le for 10mm panel, 3055mm lengths

Standard ancillary products

20 21

Standard Ancillary Products

By Plastestrip Profiles

Gaskets for timber

Blackout tape

Screws for fi xing panels to timber

Plastestrip Profi les1 - 4 Enterprise ParkSt AustellCornwall. PL25 4EJ

t. 01726 74771f. 01726 69238

[email protected]

Anti rattle tape for aluminium rails

Aluminium ventilation

Rivets for fi xing panels to aluminium railsThis drawing remains the property of Plastestrip Profiles, St Austell

GJLDrawn by

REF: PVC/50

31/10/2013Date

pvc50.dwg

Material: Plastic

Filename1:1

EditionONE

Sheet1/1


A division of Amari Plastics plc


GJLDrawn by

REF: AL/VENT/30/40

24/02/2017

Date

alvent3040.dwg

Material: 1050A grade aluminium

Filename

1:1

EditionONE

Sheet1/1

Dimensions in mm

Scale

Typical detail

Please note , when we

colour coat our profiles, only

visible faces (as shown in

this detail) are covered.If you

wish to use the profile in a

different way, please let our

sales team know when you

order so we can coat the

correct faces for your

installation. Thanks



PROFILES

Ref Description Colours090/36P Gasket for intemediate panel supports, 25m rolls

Available in black or white

090/60P Gasket for vertical panel joints, 25m rolls090/75P Gasket for vertical panel joints, 25m rolls

090/125P Gasket for vertical joint, internal or external corners, 25m rolls


PVC/50/33 50mm PVC tape to black out silver aluminium railsBlack

PVC/100/33 100mm PVC tape to black out silver aluminium rails


RP9 9mm head Torx screw for fi xing 6 - 10mm panels to timber, A4 stainless steel, 100 per box Available in any

colour*setup costs may applyRP12 12mm head Torx screw for fi xing 6 - 10mm panels to timber,

A2 stainless steel, 100 per box*Please ask our technical team for advice if you are fi xing in a marine / coastal environment.


090/35N Anti rattle tape for intemediate panel supports, 25m rollsAvailable in

black090/59N Anti rattle tape for vertical panel joints, 25m rolls

090/99N Anti rattle tape for vertical joint, internal or external corners, 25m rolls

Ref Description ColoursAL/VENT/30/40 30 - 40mm cavity closer, 2500mm lengths

Available in any colour

*setup costs may apply

AL/VENT/30/50 30 - 50mm cavity closer, 2500mm lengthsAL/VENT/50/70 50 - 70mm cavity closer, 2500mm lengths

AL/VENT/30/100 30 - 100mm cavity closer, 2500mm lengthsAL/VENT/30/120 30 - 120mm cavity closer, 2500mm lengths

Ref Description ColoursRIVETS/18/14 14mm head rivet, grip range 8 - 14mm, box of 100 Available in any


RIVETS/18/16 16mm head rivet, grip range 8 - 14mm, box of 100

RIVETS/23 16mm head rivet, grip range 14 - 19mm, box of 100*Please ask our technical team for advice if you are fi xing in a marine / coastal environment.

090/36P 090/60P 090/75P 090/125P 090/35N 090/59N 090/99N

Top drip profi le Bottom drip profi le


GJLDrawn by

REF: AL/AD/6/11

25/11/2013Date

alad611.dwg


Filename1:1

EditionONE

Sheet1/1





GJLDrawn by

REF: AL/BD/86

25/11/2013Date

albd86.dwg


Filename1:1

EditionONE

Sheet1/1





AL/AD/6/11 Top drip for 6 - 12mm panelsAvailable in any



AL/BD/86 Bottom drip for 6 - 8mm panels Available in any colour

*setup costs may applyAL/BD/15 Bottom drip for 10 - 15mm panels

Standard ancillary products

22

Bespoke flashings

We can also fold bespoke flashings, cappings, cills & reveals in almost any shape and size*. We are also able to fabricate welded corners, end caps & butt straps. Just send us a sketch with the critical dimensions of the profile and we can get them folded and powder coated to match your facade.

* All flashings, cappings, cills and reveals are made and coated in 3m lengths to be cut down on site. Please contact our technical department for advice on minimum thicknesses for powder coated flashings.

22 23

Adhesive secret fix system

Sika Tack Panel Adhesive

Ref Description

SIKA Primer Primer for the SIKATACK system, 1000ml can

SIKATAPE Assembley tape for fixing, also serves as a spacer, 33m coils

SIKATACK/310ML Adhesive, 310ml tube

SIKATACK/600ML Adhesive, 600ml sausage

SIKATACK/SAU/GUN Sausage applicator gun

SIKATACK/ELEC/GUN Battery powered sausage applicator gun

SKELETON GUN 290ml - 310ml applicator gun

PL/AD/AS/RS Roller frame, 10 rollers & tray application set

PL/AD/FS/SR Set of 10 spare rollers

25

Patrick HennellyGeneral managert. 07506 224144e. [email protected]

Sales teamMark HendersonSales manager07971 [email protected]

Claire HemingwaySales office manager01726 [email protected]

Jan BrantSales team01726 [email protected]

Hannah VenningSales team01726 [email protected]

Clare DaviesSales team01726 [email protected]

General sales queries & orders01726 [email protected]

Technical teamChris HodkinTechnical manager01726 [email protected]

Gordon LyleIT & Technical01726 [email protected]

General technical queries01726 [email protected]

Contacts

Rainscreen Cladding Accessories - Cladding Extrusions ... framing...Hi-Spec is a leading structural...

Documents

Transcript of Rainscreen Cladding Accessories - Cladding Extrusions ... framing...Hi-Spec is a leading structural...