Rail Grinding Machine:A Basic approach
-
Upload
prem-prakash-kumar -
Category
Education
-
view
1.167 -
download
0
description
Transcript of Rail Grinding Machine:A Basic approach
![Page 1: Rail Grinding Machine:A Basic approach](https://reader033.fdocuments.net/reader033/viewer/2022061220/54bc3c964a795998378b467b/html5/thumbnails/1.jpg)
Presentation on
“Rail Grinding Machine” by
ADEN/PKUS.E.Railway
![Page 2: Rail Grinding Machine:A Basic approach](https://reader033.fdocuments.net/reader033/viewer/2022061220/54bc3c964a795998378b467b/html5/thumbnails/2.jpg)
Head checks on Gauge Face of a Rail
Flaw Initiation
Head Checks
![Page 3: Rail Grinding Machine:A Basic approach](https://reader033.fdocuments.net/reader033/viewer/2022061220/54bc3c964a795998378b467b/html5/thumbnails/3.jpg)
Reduction in Rail/ Weld FailuresAction on two fronts
What is most essential for SAFETY?
Arresting Initiation &
Growth of Flaws
Objective Detection of the Flaws
Rail Grinding
Vehicular USFD Testing
![Page 4: Rail Grinding Machine:A Basic approach](https://reader033.fdocuments.net/reader033/viewer/2022061220/54bc3c964a795998378b467b/html5/thumbnails/4.jpg)
Magic Wear Rate
![Page 5: Rail Grinding Machine:A Basic approach](https://reader033.fdocuments.net/reader033/viewer/2022061220/54bc3c964a795998378b467b/html5/thumbnails/5.jpg)
IntroductionRail Grinding is an important track
maintenance toolRail Grinding is the removal of metal from the
surface of the rail head Through the action of a rotating grinding
wheelMechanism used in rail grinding is cutting of
metal associated with formation of metal chips (and not metal deformation)
![Page 6: Rail Grinding Machine:A Basic approach](https://reader033.fdocuments.net/reader033/viewer/2022061220/54bc3c964a795998378b467b/html5/thumbnails/6.jpg)
Grinding Stone
![Page 7: Rail Grinding Machine:A Basic approach](https://reader033.fdocuments.net/reader033/viewer/2022061220/54bc3c964a795998378b467b/html5/thumbnails/7.jpg)
Corrective – Removing the defects in one go
Preventive Gradual – Removing the defects in stages
Preventive – Removing the defects in nascent stage
Types of Grinding
![Page 8: Rail Grinding Machine:A Basic approach](https://reader033.fdocuments.net/reader033/viewer/2022061220/54bc3c964a795998378b467b/html5/thumbnails/8.jpg)
Corrective Grinding Also known as traditional Rail Grinding To correct existing surface defects and the
shape of the head of the railA problem exists and sufficient grinding is
done to correct the problem Defect is allowed to develop before taking up
the grinding; so remedial type action taken
![Page 9: Rail Grinding Machine:A Basic approach](https://reader033.fdocuments.net/reader033/viewer/2022061220/54bc3c964a795998378b467b/html5/thumbnails/9.jpg)
Criterion for Corrective Rail Grinding
Condition Typical Recommendations
New Rail At 20 GMT
Corrugations 0.25-1.5 mm
Engine Burns 0.6-0.8 mm
Rail End Batter 0.8 mm
Weld Batter 0.8 mm
Flaking and Shelling 0.8 mm
New Rail requires grinding for removal of mill scale.Mill scale is a very fine layer on rail head(<0.25MM).
![Page 10: Rail Grinding Machine:A Basic approach](https://reader033.fdocuments.net/reader033/viewer/2022061220/54bc3c964a795998378b467b/html5/thumbnails/10.jpg)
PREVENTIVE GRINDING
Also known as profile grindingCarried out before problems occursRail head is ground to specific profile so as to
improve rail wheel contact interfaceCarried out more frequentlyThis is periodic maintenance grinding carried
out at frequency decided on the basis of GMT.
![Page 11: Rail Grinding Machine:A Basic approach](https://reader033.fdocuments.net/reader033/viewer/2022061220/54bc3c964a795998378b467b/html5/thumbnails/11.jpg)
Profile Grinding
Less aggressive grinding processRemoves fatigued material, surface cracks &
improves rail wheel interaction Eliminates the need for defect correction
grindingGenerally one pass process carried out at
higher speed ranging from 10 to 24 kmph.
![Page 12: Rail Grinding Machine:A Basic approach](https://reader033.fdocuments.net/reader033/viewer/2022061220/54bc3c964a795998378b467b/html5/thumbnails/12.jpg)
Preventive Gradual GrindingIn between corrective and preventive
grindingThe defects in the rail are not removed in one
goRails are ground at slow speed - only 1 to 3
passes are givenIn each round, the defects will taper downUltimately, we shift to preventive grinding
![Page 13: Rail Grinding Machine:A Basic approach](https://reader033.fdocuments.net/reader033/viewer/2022061220/54bc3c964a795998378b467b/html5/thumbnails/13.jpg)
Preventive Gradual GrindingIR has adopted Preventive Gradual Grinding
to start withGrinding cycle – 25 GMT –Ist, 50 GMT-2nd
One pass on straight and 3 passes in curve (speed 15-18 kmph)
Metal removal 0.1-0.2 mm (approx.)
![Page 14: Rail Grinding Machine:A Basic approach](https://reader033.fdocuments.net/reader033/viewer/2022061220/54bc3c964a795998378b467b/html5/thumbnails/14.jpg)
Preventive Gradual Strategy
After I Cycle Cracks Partly Removed
After II Cycle (approx. 30 GMT)
More Cracks Removed
After III Cycle (approx. 60 GMT)
Cracks Fully Removed
![Page 15: Rail Grinding Machine:A Basic approach](https://reader033.fdocuments.net/reader033/viewer/2022061220/54bc3c964a795998378b467b/html5/thumbnails/15.jpg)
Reshaping Rail Head Profile - favourable Rail Wheel Interaction reducing contact stresses
Removal of cracks in initial growth phase - avoiding their propagation deeper
Shifting the contact of the wheels - away from the damaged zone
Avoid Dip Formation at Welds - Reduction in hunting by avoiding contact on misaligned welds
How Rail Grinding will help?
![Page 16: Rail Grinding Machine:A Basic approach](https://reader033.fdocuments.net/reader033/viewer/2022061220/54bc3c964a795998378b467b/html5/thumbnails/16.jpg)
BENEFITS Increased rail life Increased wheel lifeReduction in fatigue & surface defectsLess tractive resistance & therefore less fuel
consumption Reduced need for rail transposing in curves,
thus saving cost on maintenanceImproved reliability of USFD testing
![Page 17: Rail Grinding Machine:A Basic approach](https://reader033.fdocuments.net/reader033/viewer/2022061220/54bc3c964a795998378b467b/html5/thumbnails/17.jpg)
BENEFITS contd…Reduced track geometry deterioration Reduced degradation of ballastLess noiseImproved vehicle ride quality Reduced derailment proneness
![Page 18: Rail Grinding Machine:A Basic approach](https://reader033.fdocuments.net/reader033/viewer/2022061220/54bc3c964a795998378b467b/html5/thumbnails/18.jpg)
OTHER BENEFITS Fastening (Rubber pad, ERC)
Life extended 3 timesSleepers
Life extended by 20%Tamping Cycle
Extended by 30%Ballast Cleaning Cycle
Extended by 15%Vehicle Maintenance & Wheel turning
improved
![Page 19: Rail Grinding Machine:A Basic approach](https://reader033.fdocuments.net/reader033/viewer/2022061220/54bc3c964a795998378b467b/html5/thumbnails/19.jpg)
OTHER BENEFITS Tractive energy
Reduced by 8 – 10%Noise and vibration
In the human-hearing frequency range noise reduction of over 10 db can be achieved by grinding of corrugations
![Page 20: Rail Grinding Machine:A Basic approach](https://reader033.fdocuments.net/reader033/viewer/2022061220/54bc3c964a795998378b467b/html5/thumbnails/20.jpg)
Before Grinding*One Time Activities
*Repetitive Activities
![Page 21: Rail Grinding Machine:A Basic approach](https://reader033.fdocuments.net/reader033/viewer/2022061220/54bc3c964a795998378b467b/html5/thumbnails/21.jpg)
One Time ActivitiesEstablishment of Test SitesObstructions in the trackDetails of Rail – Old/ New, GMT carriedMeasurementsRail condition data
![Page 22: Rail Grinding Machine:A Basic approach](https://reader033.fdocuments.net/reader033/viewer/2022061220/54bc3c964a795998378b467b/html5/thumbnails/22.jpg)
Typical ‘Test Site’ on SCR
22.01.2010 PKG/SPT2/IRICEN
![Page 23: Rail Grinding Machine:A Basic approach](https://reader033.fdocuments.net/reader033/viewer/2022061220/54bc3c964a795998378b467b/html5/thumbnails/23.jpg)
Test Sites -SelectionWhy: For establishing - Appropriate metal removal to control the growth of RCF cracks - Target Rail profile - Grinding cycle requirements
Where: -High tonnage - Typical curvature / rail type - Good access to track - Rail history / defects - No planned rail replacement -Typical traffic & speed
- Away from Weld, Signal, LC etc
How: Gather data –MiniProf, surface photos, dye penetrate, weld dips, hunting
![Page 24: Rail Grinding Machine:A Basic approach](https://reader033.fdocuments.net/reader033/viewer/2022061220/54bc3c964a795998378b467b/html5/thumbnails/24.jpg)
Test Sites - MiniProf
How– MiniProf:• Mark rail location with paint on field side for all future measurements
• Record:- Line- Curve High, Low
- Tangent right, Tangent left- Track –UP, DN- Date -automatic- Gauge –automatic
![Page 25: Rail Grinding Machine:A Basic approach](https://reader033.fdocuments.net/reader033/viewer/2022061220/54bc3c964a795998378b467b/html5/thumbnails/25.jpg)
MiniProf
![Page 26: Rail Grinding Machine:A Basic approach](https://reader033.fdocuments.net/reader033/viewer/2022061220/54bc3c964a795998378b467b/html5/thumbnails/26.jpg)
Typical Rail Profiles using MiniProf
![Page 27: Rail Grinding Machine:A Basic approach](https://reader033.fdocuments.net/reader033/viewer/2022061220/54bc3c964a795998378b467b/html5/thumbnails/27.jpg)
Dye Penetration TestingGrinding Test Sites:
How –Dye Penetrant:• cleaner, dye (wait 2 min), Wipe clean,
water wash, Apply Developer (no overspray)
• Record:- Location
-Outside (OR) Inside (IR) rail, T Left, T Right-Track –UP, DN-Date-Gauge -Direction Traffic-Crack length -Rail age and weight
![Page 28: Rail Grinding Machine:A Basic approach](https://reader033.fdocuments.net/reader033/viewer/2022061220/54bc3c964a795998378b467b/html5/thumbnails/28.jpg)
Obstructions in GrindingTurn-outsSEJsLevel CrossingsAxle countersLocation – ChainagesStart & End of CurvesRH/LH Curve
![Page 29: Rail Grinding Machine:A Basic approach](https://reader033.fdocuments.net/reader033/viewer/2022061220/54bc3c964a795998378b467b/html5/thumbnails/29.jpg)
Joggled Fish Plate- Is it Obstruction?
![Page 30: Rail Grinding Machine:A Basic approach](https://reader033.fdocuments.net/reader033/viewer/2022061220/54bc3c964a795998378b467b/html5/thumbnails/30.jpg)
RDSO Proforma for Grinding
![Page 31: Rail Grinding Machine:A Basic approach](https://reader033.fdocuments.net/reader033/viewer/2022061220/54bc3c964a795998378b467b/html5/thumbnails/31.jpg)
Rail Condition Data• Rail surface defects• Wear of rails• USFD defects in rails/weld• Rail/Weld failure details• Weld dip details
![Page 32: Rail Grinding Machine:A Basic approach](https://reader033.fdocuments.net/reader033/viewer/2022061220/54bc3c964a795998378b467b/html5/thumbnails/32.jpg)
Target Rail Profile• How it is decided?• For IR, designed by NRC• Four Profiles-
– CPC for DN road straight track & low rail of mild curve
– CPF for UP road and low rail of sharp curve– HS for high rail of sharp curve– HM for low rail of Mild curve
• Why two profiles for straight track?
![Page 33: Rail Grinding Machine:A Basic approach](https://reader033.fdocuments.net/reader033/viewer/2022061220/54bc3c964a795998378b467b/html5/thumbnails/33.jpg)
What is a patternArrangement of stones across the rail and
along the grinding trainPattern needs to be selected by P. Way
supervisor trained in grindingPurpose is to achieve target rail profile from
existing rail profileFactors affecting Metal to be removed
![Page 34: Rail Grinding Machine:A Basic approach](https://reader033.fdocuments.net/reader033/viewer/2022061220/54bc3c964a795998378b467b/html5/thumbnails/34.jpg)
How to select the pattern ?
PATTERN SHEET DESIGNED BY LORAM
![Page 35: Rail Grinding Machine:A Basic approach](https://reader033.fdocuments.net/reader033/viewer/2022061220/54bc3c964a795998378b467b/html5/thumbnails/35.jpg)
Different patterns being fed into HMI of RGM
![Page 36: Rail Grinding Machine:A Basic approach](https://reader033.fdocuments.net/reader033/viewer/2022061220/54bc3c964a795998378b467b/html5/thumbnails/36.jpg)
Recommendations of NRC for Pattern Selection for I Cycle & I Pass
![Page 37: Rail Grinding Machine:A Basic approach](https://reader033.fdocuments.net/reader033/viewer/2022061220/54bc3c964a795998378b467b/html5/thumbnails/37.jpg)
NRC Recommendation for Preventive Gradual Grinding Edit 6 Sep 6th, 2011
Template Track
Patterns SpeedWrong Direction in GDMS All Passes
Speed3 Pass PatternsFirst Pass
AggressiveFirst Pass Generic Kph Pass 1 Pass 2 Pass 3 Kph
HS UP/Down 14 45 18 14 27 15 18HS NEW RAIL UP/Down 2 45 18 2 47 23 18
HM UP/Down 10 45 18 10 43 27 18HM NEW
RAIL UP/Down 2 45 182 47 x 18
LS-CPF UP/Down 20 47 18 20 23 27 18
LS-CPF NEW RAIL UP/Down 24 47 18 24 23 23 18
LM-CPC UP/Down 39 39 18 39 42 39 18LM-CPC NEW
RAILUP/Down 17 41 18 39 46 x 18
TCPF UP 24 24 15
TCPF New railUP 24 24 15
TCPC DN 39 39 15
TCPC NEW RAIL DN 39 39 15
TCPC 52 Kg
RAIL UP/Down39 39 15
LS-CPC 52 Kg
RAIL UP/Down 39 39 18 39 42 39 18
LM-CPC 52 Kg RAIL UP/Down 39 39 18 39 42 39 18
![Page 38: Rail Grinding Machine:A Basic approach](https://reader033.fdocuments.net/reader033/viewer/2022061220/54bc3c964a795998378b467b/html5/thumbnails/38.jpg)
Calling Patterns for CYCLE 1 PASS 2 (60 Kg old rail)• For Straight/ Tangent Track
– DN Road – Template CPC – Pattern 39– UP Road – Template CPF – Pattern 24
• For Curve Track – Mild Curve (< 1.25 deg)– High/ Outer Rail – Template HM – Pattern 10– Low/Inner Rail – Template CPC – Pattern 39
• For Curve Track – Sharp Curve (> 1.25 deg)– High Rail – Template HS – Pattern 14– Low Rail – Template CPF – Pattern 10
![Page 39: Rail Grinding Machine:A Basic approach](https://reader033.fdocuments.net/reader033/viewer/2022061220/54bc3c964a795998378b467b/html5/thumbnails/39.jpg)
Calling Patterns for CYCLE 1PASS 1 (60 Kg new rail)Straight Track – same as for old railFor Curve Track – Mild Curve (< 1.25 deg)
High/ Outer Rail – Template HM – Pattern 2Low/Inner Rail – Template CPC – Pattern 17
For Curve Track – Sharp Curve (> 1.25 deg)High Rail – Template HS – Pattern 2Low Rail – Template CPF – Pattern 24
For 52 kg Rail – For all conditions - 39
![Page 40: Rail Grinding Machine:A Basic approach](https://reader033.fdocuments.net/reader033/viewer/2022061220/54bc3c964a795998378b467b/html5/thumbnails/40.jpg)
Subsequent PassesAs suggested by GDMSFirst cycle – 3 passes on both high & low railsIf GDMS gives 2 Passes – ask for alternative
with 3 passesWhat to do if GDMS data has wrong direction
of curve
![Page 41: Rail Grinding Machine:A Basic approach](https://reader033.fdocuments.net/reader033/viewer/2022061220/54bc3c964a795998378b467b/html5/thumbnails/41.jpg)
Grind Data Management System (GDMS)
The Grind Data Management System is an integrated automatic data acquisition, data viewing and analysis, quality control, reporting and rail grinding planning tool.
![Page 42: Rail Grinding Machine:A Basic approach](https://reader033.fdocuments.net/reader033/viewer/2022061220/54bc3c964a795998378b467b/html5/thumbnails/42.jpg)
Issues with GDMS
The depth of cut w.r.t rail head and area of metal removal for different patterns is not available with IR to check the correctness of grinding.
The use of RCA in deciding the grinding pattern and grinding depth is not yet established.
Calculation of metal removal/m is still to be incorporated in GDMS.
![Page 43: Rail Grinding Machine:A Basic approach](https://reader033.fdocuments.net/reader033/viewer/2022061220/54bc3c964a795998378b467b/html5/thumbnails/43.jpg)
Practical issues Filling of Water to be done in night i.e during maintenance
shifts. The requirement of HSD oil from each RCD shall be arrived
based on the locations of RCD and the track to be ground and suitable instructions shall be got issued from HQ to the respective RCDs.
While working of RGM, one track machine operator of the concerned division having route learning of that section shall be deputed for working as pilot and to assist in calling the signals.
When using the aggressive patterns as given by NRC, metal to the extent of 1.5mm was removed.
On some occasions it is noted that the pattern entered in HMI are not as per the grind plan due to operator mistake. This should be taken care.
![Page 44: Rail Grinding Machine:A Basic approach](https://reader033.fdocuments.net/reader033/viewer/2022061220/54bc3c964a795998378b467b/html5/thumbnails/44.jpg)
Practical issues A moped trolley with PA system, arranged to go ahead of RGM to
warn the gatemen, gang men working in section to keep at least 20m away from track while grinding. The onlookers and vehicles at LC shall be warned to keep a safe distance.
From each division, a PWI is nominated as grinding supervisor. His duties shall be To ensure the pattern fed into the HMI is same as suggested by
NRC. To ensure correct preparation of grind plan To cross check the grind plan and grind history after grinding to
find any deviations in the patterns. To take pre and post miniprof readings at test locations and to
keep the record as per proforma circulated by RDSO. With experience, to check whether grinding is proper or not while
observing the pre and post grind profiles on GDMS and to suggest the change in the patterns if required while grinding.
![Page 45: Rail Grinding Machine:A Basic approach](https://reader033.fdocuments.net/reader033/viewer/2022061220/54bc3c964a795998378b467b/html5/thumbnails/45.jpg)
Planning before introduction of Grinding in a Zonal RailwayIdentify the sections to be ground based on GMT, axle
loadEstablish test site locations and fill the RDSO
proforma for these locations.Identify stabling sidings at 50km apart, if not
available provide ( Provide only RL platform)Identify the RCDs for HSD filling and make watering
arrangements at stabling sidings. Issue JPO at HQ level and Divisional level for RGM
operations.Obtain CRS sanction.Prepare track database for input to GDMS
(Direction of curves shall not be w.r.t traffic direction but w.r.t increasing chainage)
![Page 46: Rail Grinding Machine:A Basic approach](https://reader033.fdocuments.net/reader033/viewer/2022061220/54bc3c964a795998378b467b/html5/thumbnails/46.jpg)
Knowing the Location/Sec where grinding is to be done.
Type of Rail and sleeper, joint type(LWR,SWR,FP), and Sectional GMT.
Location of SEJ, Points & X-ing, LC, Axle counter and any other obstacle which may infringe the grinding.
Finding the location where grinding will not to be done.Finalizing the Location where grinding Machine will be stabled (where maintenance can be done). Preparation of grind plan consisting of locations to be ground with first pass patterns and depth of cut and details of obstructions .Clearing of rail head ballast to prevent damage to grinding motorsPainting of Curve starting and ending on sleeper with white/yellow paint conspicuously.Ensuring sufficient HSD and water for the day
Works to be carried out Before Rail grinding
![Page 47: Rail Grinding Machine:A Basic approach](https://reader033.fdocuments.net/reader033/viewer/2022061220/54bc3c964a795998378b467b/html5/thumbnails/47.jpg)
Measurements and condition monitoring before grinding
Measure the rail profile at nominated test locations with miniprof, Bar gauge, do DPT, take surface photos and measure hardness. while taking miniprof readings, the details such as LH/RH of rail and TP to be fed otherwise it will not be possible to identify the pre and post grind profiles.
![Page 48: Rail Grinding Machine:A Basic approach](https://reader033.fdocuments.net/reader033/viewer/2022061220/54bc3c964a795998378b467b/html5/thumbnails/48.jpg)
Availability of complete & sufficient staff with competency and Pilot with route learningMoped trolley with PA system to warn Rly. staff and onlookers and public at LCRemoving of axle counters by S&T staffJob briefing consisting of
Location of workSafety precautions to be takenHead count and complete PPE Allocation of duties with locationsFirst aid, Location of nearest hospitals and fire stations
along the work site.Effective Communication system between crew, crew
and station
Just Before the Grinding starts
![Page 49: Rail Grinding Machine:A Basic approach](https://reader033.fdocuments.net/reader033/viewer/2022061220/54bc3c964a795998378b467b/html5/thumbnails/49.jpg)
Monitoring During Grinding
*ON GROUND
*ON MACHINE
![Page 50: Rail Grinding Machine:A Basic approach](https://reader033.fdocuments.net/reader033/viewer/2022061220/54bc3c964a795998378b467b/html5/thumbnails/50.jpg)
MonitoringReal Time Monitoring of Grinding Operation
on the vehicleOn the ground
MonitoringAmount of metal removedProfile of the rail achieved after each passEfficacy of the grinding motors
![Page 51: Rail Grinding Machine:A Basic approach](https://reader033.fdocuments.net/reader033/viewer/2022061220/54bc3c964a795998378b467b/html5/thumbnails/51.jpg)
KLD – Optical Rail Profile Measurement System
![Page 52: Rail Grinding Machine:A Basic approach](https://reader033.fdocuments.net/reader033/viewer/2022061220/54bc3c964a795998378b467b/html5/thumbnails/52.jpg)
Grind Data Management System (GDMS)The Grind Data Management System is an
integrated automatic data acquisition, data viewing and analysis, quality control, reporting and rail grinding planning tool.
![Page 53: Rail Grinding Machine:A Basic approach](https://reader033.fdocuments.net/reader033/viewer/2022061220/54bc3c964a795998378b467b/html5/thumbnails/53.jpg)
MONITORING ON GROUNDWATER SPRAY SYSTEMBAR GAUGESTAR GAUGECONTACT BANDSURFACE ROUGHNESSRAIL SURFACE FINISHFIRE HAZARDS
![Page 54: Rail Grinding Machine:A Basic approach](https://reader033.fdocuments.net/reader033/viewer/2022061220/54bc3c964a795998378b467b/html5/thumbnails/54.jpg)
BAR GAUGE
![Page 55: Rail Grinding Machine:A Basic approach](https://reader033.fdocuments.net/reader033/viewer/2022061220/54bc3c964a795998378b467b/html5/thumbnails/55.jpg)
Taking measurements of rail profile before and grinding with bar-gauge
![Page 56: Rail Grinding Machine:A Basic approach](https://reader033.fdocuments.net/reader033/viewer/2022061220/54bc3c964a795998378b467b/html5/thumbnails/56.jpg)
Contact Band
![Page 57: Rail Grinding Machine:A Basic approach](https://reader033.fdocuments.net/reader033/viewer/2022061220/54bc3c964a795998378b467b/html5/thumbnails/57.jpg)
![Page 58: Rail Grinding Machine:A Basic approach](https://reader033.fdocuments.net/reader033/viewer/2022061220/54bc3c964a795998378b467b/html5/thumbnails/58.jpg)
Star Gauge to check Crown Radius
![Page 59: Rail Grinding Machine:A Basic approach](https://reader033.fdocuments.net/reader033/viewer/2022061220/54bc3c964a795998378b467b/html5/thumbnails/59.jpg)
Testing rail hardness
![Page 60: Rail Grinding Machine:A Basic approach](https://reader033.fdocuments.net/reader033/viewer/2022061220/54bc3c964a795998378b467b/html5/thumbnails/60.jpg)
Surface Roughness > 12 Microns -Poor Finish Stays a Long Time
![Page 61: Rail Grinding Machine:A Basic approach](https://reader033.fdocuments.net/reader033/viewer/2022061220/54bc3c964a795998378b467b/html5/thumbnails/61.jpg)
Quality Control Examples –Straw Colour and Missed Grind
![Page 62: Rail Grinding Machine:A Basic approach](https://reader033.fdocuments.net/reader033/viewer/2022061220/54bc3c964a795998378b467b/html5/thumbnails/62.jpg)
Poor Finish – Blueing and Large Facets
![Page 63: Rail Grinding Machine:A Basic approach](https://reader033.fdocuments.net/reader033/viewer/2022061220/54bc3c964a795998378b467b/html5/thumbnails/63.jpg)
Stone Transverse Position on the Rail Surface and Horsepower
Rail ‘blueing”Poor cutting (low pressure)
Grinding stoneNot set correctly. Grinding on the outside diameter (OD)
![Page 64: Rail Grinding Machine:A Basic approach](https://reader033.fdocuments.net/reader033/viewer/2022061220/54bc3c964a795998378b467b/html5/thumbnails/64.jpg)
MONITORING ON CAR• Sequencing Monitor - Skipping Obstructions• Safety systems• Calling Patterns• Feeding Patterns• Working of motors• Water Spray System• Calling Patterns• Pre & Post GQI
![Page 65: Rail Grinding Machine:A Basic approach](https://reader033.fdocuments.net/reader033/viewer/2022061220/54bc3c964a795998378b467b/html5/thumbnails/65.jpg)
LORAM RGI MODEL72 STONE RAIL GRINDER
![Page 66: Rail Grinding Machine:A Basic approach](https://reader033.fdocuments.net/reader033/viewer/2022061220/54bc3c964a795998378b467b/html5/thumbnails/66.jpg)
TECHNOLOGICAL FEATURES
Self propelled Diesel powered vehicle.
Can work in both directions.
Negotiate cant up to 185 mm.
Traveling speed 80 Kmph when self propelled and 100 Kmph in train formation.
25 kmph on 1 in 33 Grade Speed with buggies down – 40kmph Grinding Speed - 2.4 to 24 kmph Can grind on a 100 m radius curve Stopping Distance – 400 m from 80 kmph on a level track
![Page 67: Rail Grinding Machine:A Basic approach](https://reader033.fdocuments.net/reader033/viewer/2022061220/54bc3c964a795998378b467b/html5/thumbnails/67.jpg)
![Page 68: Rail Grinding Machine:A Basic approach](https://reader033.fdocuments.net/reader033/viewer/2022061220/54bc3c964a795998378b467b/html5/thumbnails/68.jpg)
Operational IssuesSelf propelled carPilot, Guard and T.I. to be provided by the
division in two shifts for first three monthsOperating speed
10kmph @ 0.20mm15kmph @ 0.13mm
Speed Cert to be issued and CRS sanction to be obtained
![Page 69: Rail Grinding Machine:A Basic approach](https://reader033.fdocuments.net/reader033/viewer/2022061220/54bc3c964a795998378b467b/html5/thumbnails/69.jpg)
Operational issues (contd.)Joint monthly prog. at zonal & weekly prog.
At Divl level 4 hours corridor block daily and 6 hours
block on weekends by SL working, trains cancellation/ regulation
Controller to allow RGM in the section following a train to save time
Goods trains carrying highly inflammable material like Naptha to be regulated on adjacent line during block
Obstructions in the trackPassage of trains after the grinding block
![Page 70: Rail Grinding Machine:A Basic approach](https://reader033.fdocuments.net/reader033/viewer/2022061220/54bc3c964a795998378b467b/html5/thumbnails/70.jpg)
Fire Control SystemSpark Guards of different designsWater Storage – Front Control Car 20000 lit
- Water Tank 55000 lit Water Pump – One 30hp 945 lit/minSleeper Spray – 2 Sets 7.6 lit/minDitch Spray – 2 Sets 100 lit/minWater Cannons – 2 Sets 220 lit/min upto 31mNo. of Fire Extinguishers at different
locations in the car
![Page 71: Rail Grinding Machine:A Basic approach](https://reader033.fdocuments.net/reader033/viewer/2022061220/54bc3c964a795998378b467b/html5/thumbnails/71.jpg)
Consumables and SparesWater to be arrangedFuel arrangementHydraulic oil
Grinding stones for 600 hrs of working included with machine
RDSO to issue the specs and list of suppliers for grinding stones
![Page 72: Rail Grinding Machine:A Basic approach](https://reader033.fdocuments.net/reader033/viewer/2022061220/54bc3c964a795998378b467b/html5/thumbnails/72.jpg)
Fuelling ArrangementsZonal Railways to send vetted indents to COS
every yearDiesel to be provided by RCDs( Railway
Consumers Depots)COS to place order on oil Cos.Sufficient fuel imprest to be created - 5 lakhs;
this will cater for other unforeseen expenses also
![Page 73: Rail Grinding Machine:A Basic approach](https://reader033.fdocuments.net/reader033/viewer/2022061220/54bc3c964a795998378b467b/html5/thumbnails/73.jpg)
Stabling Facilities300m or 2X150m sidings at every 50kmsConnectivity at both endsLighting, watering, approach road and other
facilities to be providedLodging and Boarding of staff Stabling either on unwired sdg or sdg should
be with OHE isolation system
![Page 74: Rail Grinding Machine:A Basic approach](https://reader033.fdocuments.net/reader033/viewer/2022061220/54bc3c964a795998378b467b/html5/thumbnails/74.jpg)
Other FeaturesDust Collection SystemLaser Based Rail Profile Measurement
System on both ends of the consistLORAM’s Software – GDMS
- The software stores the data, analyses and compares the data and works out the grinding efficiency
Recommendation of target profile, pattern and speed in different passes to achieve the target profile optimally
![Page 75: Rail Grinding Machine:A Basic approach](https://reader033.fdocuments.net/reader033/viewer/2022061220/54bc3c964a795998378b467b/html5/thumbnails/75.jpg)
Thank You