RADWIN 2000 Release 2.3 & WinLink 1000 Release 1.9 & BDU Release 6.2 Product Management.
-
Upload
gwenda-mckenzie -
Category
Documents
-
view
248 -
download
3
Transcript of RADWIN 2000 Release 2.3 & WinLink 1000 Release 1.9 & BDU Release 6.2 Product Management.
RADWIN 2000Release 2.3&WinLink 1000 Release 1.9&BDU Release 6.2
Product Management
2
Main New Features
Feature RADWIN 2000 WinLink 1000
HSS V V
Monitored Hot Standby (MHS 1+1)
V V
Diversity V
Spectrum View V
3
Hub Site Synchronization
No more limitations
HSS between RADWIN 2000 radios
WinLink 1000 radios
RADWIN 2000 and WinLink 1000 radios
HSS up to 16 radios in a site
Fully supported by RADWIN Manager
Supported by software upgrade to RADWIN 2000 install base
All RADWIN 2000 radios in the field are HW ready for HSS
4
HSS Applications
Backhaul HSS is needed in installations
where a RADWIN 2000 link is the backhaul for many lower capacity access links
The backhaul link can be synchronized to the access links to mitigate potential mutual interference
Access and Corporate Connectivity Where any links originate from a common hub site
With HSS by RADWIN 2000 such applications now support high capacity connectivity
Attack Plan Identify existing customers
with mixed network of WinLink 1000 and RADWIN 2000
Propose the HSS solution for mixed deployment
5
Monitored Hot Standby (MHS) 1+1
Providing redundancy and backup to TDM services
Targeted for Cellular backhaul
Providing protection against Equipment failure (ODU and IDU) Loss of air interface
Using a primary link and a secondary link:
Two RADWIN 2000 links A RADWIN 2000 link and a WinLink
1000 link with new IDU-C Two WinLink 1000 links with new
IDU-C (single dual-pol antenna can be used)
6
MHS Applications
Provide high reliability high-capacity Point-to-Point links
Provide redundancy and high reliability for carrier class operators
Optimized for high capacity links operating in license-free bands
Additional values: Each link can use a different band for maximum protection to
the air interface Affordable SLA can be offered by protecting part of the
RADWIN 2000 trunks with WinLink 1000
Go To Market Present the capability to Cellular Operators
7
MHS Spec
Supported in RADWIN 2000 by software upgrade to the install base
TDM service cut-over from the primary to the secondary link is completely automatic, less than 50 ms
Automatic restore to primary link as soon as it becomes available
Supports up to 16 TDM services for RADWIN 2000 and 4 TDM services for WinLink 1000
HSS is used between the links Install both sites with HSS cables for additional protection
Ethernet services No Ethernet 1+1 Ethernet traffic is always “on” on both links, while the TDM service is
running only on one link Each link carries different Ethernet traffic
8
Diversity
Antenna diversity Uses two antennas
Each antenna experiences a different interference environment
The system chooses the best received signal providing enhanced robustness
Antenna diversity requires antenna separation, possible by two methods: Polarization Diversity - combines a pair of antennas with orthogonal polarizations
Spatial Diversity - employs antennas that are physically separated from one another
DiversityCapacity 25 Mbps
MIMOCapacity 50 Mbps
9
Diversity – Receive Combining
10
Diversity – When to Use
MIMO Use MIMO Mode to get the highest capacity, up to 50 Mbps full duplex
Use MIMO when the air conditions are similar between the antennas
Use Diversity instead of MIMO in the following cases: When the system cannot operate in MIMO Mode due to link conditions
When you get higher capacity in Diversity Mode than in MIMO Mode
Note that Diversity Mode requires understanding of the nature of interference and of the correct solution to deploy. Advise PS.
Remember that the capacity in Diversity is ½ than that of MIMO
11
Spectrum View
An RF survey tool Support link installation before
service activation
Activated by the installer
Helps selecting the best channel during installation
Supports quick and easy installation
12
Spectrum View – Display Information
Spectral measurement for each of the 4 receivers that make the link
Spectral power measurements in 5MHz channel granularity
Current, average and maximum power per channel
Channels free from radars, with radars and barred (for DFS bands)
Scanned and un-scanned channels
Channels selected for ACS
Current operational channel
Time stamp of the last spectrum scan
Zoom, selective view of antennas and sites and detail level
13
Spectrum View – Tool Capabilities
Save and restore – save the spectral information and also view retrieved spectral information from historical spectrum scans
Diagnostics - the Spectrum View information is logged as part of the Diagnostics Information to improve link and system diagnostics and remote support. It can be retrieved from the RADWIN Manager menu with Help Get Diagnostic Information
Management Integration - Spectrum view information is supported in RADWIN’s MIB and can be used by external Network Management applications
Designed for Unlicensed Spectrum – the spectrum measurement algorithms are designed to show accurate information while accommodating with variances in frequency, temperature and interference power and overcoming anomalies that tend to occur in high interference environments
Scanning Time – ~10 seconds for an entire band scan. It is recommended to scan for a few minutes for accurate results.
14
RADWIN 2000 products
15
4.8 GHz Radio
Motivation 4.8 GHz is a licensed band It is used mainly for security applications being part of the 4.4 – 4.9 GHz spectrum It is used also for broadband applications
Product description The only RADWIN product that supports the 4.8 GHz band Connectorized only Supported bands:
5.9 GHz Universal 5.8 GHz FCC/IC, 5.8 GHz MII China, 5.8 GHz WPC India 5.4 GHz FCC, 5.4 GHz IC, 5.4 GHz Universal 5.3 GHz FCC/IC, 5.3 GHz Universal 4.9 GHz FCC, 4.9 GHz Universal 4.8 GHz Universal (factory default) 2.4 GHz FCC/IC
4.8 GHz Universal band: 4.800 to 4.900 GHz (occupied spectrum. Center frequencies 4.810 to 4.890 GHz) Default channel 4.850 GHz Channel BW 20 MHz
Part number RW-2948-0250
16
Frequency5.8GHz FCC/IC
Integrated Ant.RW-2050-0150
5.8GHz FCC/IC ConnectorizedRW-2050-0250
2.4GHz FCC/IC Integrated Ant.RW-2020-0150
4.9GHz FCC Integrated Ant.RW-2049-0150
4.9GHz FCC ConnectorizedRW-2049-0250
5.9GHz Universal V V - V V
5.8GHz FCC/IC Factory Default Factory Default - V V
5.8GHz MII China V V - V V
5.8GHz WPC India V V - V V
5.4GHz FCC V V - V V
5.4GHz IC V V - V V
5.4GHz Universal V V - V V
5.3GHz FCC/IC V V - V V
5.3GHz Universal V V - V V
4.9GHz FCC - - - Factory Default Factory Default
4.9GHz Universal - - - V V
2.4GHz FCC/IC - V Factory Default - V
RADWIN 2000 FCC Products
17
Frequency5.8GHz WPC
Integrated Ant.RW-2450-0150
5.8GHz WPC ConnectorizedRW-2450-0250
2.4GHz FCC/IC Integrated Ant.RW-2020-0150
5.8GHz WPC India Factory Default Factory Default -
2.4GHz FCC/IC - V Factory Default
RADWIN 2000 Products for India
18
Frequency5.X GHz ETSI
Integrated Ant.RW-2250-0150
5.XGHz ETSI Connectorized
RW-2250-0250
5.8GHz ETSI V V
5.4GHz ETSI Factory Default Factory Default
5.3GHz ETSI V V
RADWIN 2000 Products for ETSI
19
Frequency4.8GHz
ConnectorizedRW-2948-0250
6.0GHz Universal -
5.9GHz Universal V
5.8GHz FCC/IC V
5.8GHz MII China V
5.8GHz WPC India V
5.4GHz FCC V
5.4GHz IC V
5.4GHz Universal V
5.3GHz FCC/IC V
5.3GHz Universal V
4.9GHz FCC V
4.9GHz Universal V
4.8GHz Universal Factory Default
2.4GHz FCC/IC -
RADWIN 2000 Additional Products
20
RADWIN 2000 Antennas
Part Number Description
RW-9611-4958 Flat panel, 1.2ft, dual polarization, gain 23dBi, 5.140-6.090 GHz
RW-9721-5158 Dish, 2ft, dual polarization, gain 28dBi, 5.250-6.000 GHz
RW-9612-5001 Flat panel, 1.2ft, dual polarization, gain 23dBi, 4.900-5.800 GHz
RW-9612-4001 Flat panel, 1.2ft, dual polarization, gain 22dBi, 4.4-5.1 GHz
RW-9612-2427 Flat panel, 1.2ft, dual polarization, gain 19dBi, 2.400-2.700 GHz
21
WinLink 1000 Products
22
WinLink 1000 New Products
Product Freq. Channel Tx Power Region Application
WL1000-ODU-VS/F24/FCC/CMB/EXT 2.312 – 2.482 GHz 18dBm Worldwide
Video Surveillance
WL1000-ODU-VS/F24/FCC/CMB/INT 2.312 – 2.482 GHz 18dBm Worldwide
WL1000-ODU-VS/F54/ETSI/CMB/EXT 5.140 – 5.880 GHz 8dBm Europe
WL1000-ODU-VS/F54/ETSI/CMB/INT 5.140 – 5.880 GHz 8dBm Europe
WL1000-ODU-VS/F58/FCC/CMB/EXT 4.940 – 5.950 GHz 16dBm Worldwide
WL1000-ODU-VS/F58/FCC/CMB/INT 4.940 – 5.950 GHz 16dBm Worldwide
WL1000-ODU-HE/F27/HP/EXT 2.700 – 2.900 GHz
23dBmIndia Access, Backhaul
External FP Antenna for 2.7-2.9GHz 17dBi
WL1000-ODU-HE/F24/HP/EXT 2.312 – 2.482 GHz 16dBm Russia and Worldwide
Access, BackhaulWL1000-ODU-HE/F24/HP/INT 2.312 – 2.482 GHz 16dBm
DC-PoE 12VDC-24VDC Worldwide Solar Power Applications
BDU AC Power Adaptor Worldwide MPtP
23
WinLink 1000 Modified Products
Frequency Range Center Frequency Resolution
Product Previous New Previous New Tx Power
WL1000-ODU/F54/HP/INT
5.500 – 5.700 GHz 5.475 – 5.720 GHz 20 MHz 5 MHz
18dBm
WL1000-ODU/F54/HP/EXT 18dBm
WL1000-ODU/F54/HP/INT/PoE 18dBm
WL1000-ODU/F54/HP/EXT/PoE 18dBm
WL1000-ODU-HE/F54/HP/INT 23dBm
WL1000-ODU-HE/F54/HP/EXT 23dBm
24
WinLink 1000 VS - Overview
Video surveillance application requires: High Capacity - Mega-Pixel cameras consuming high bandwidth High robustness and reliability Real Time - Focused alerts, maximum information for manned patrols Mission-critical - No tolerance for system downtime or quality degradation
New WinLink 1000 VS Family - for Video Surveillance applications Asymmetric Ethernet throughput 2/5Mbps, depends on product & distance Up to 20Km distance 5, 10 & 20MHz channel BW Multi-band support for all products HSS support for all products
25
Video Surveillance - Project Types
City surveillance (low scale)
Enterprise
Campuses
Plants
Gas stations
ATMs
25
Low-end High-end
City surveillance (high scale)
Border control
Railways security
Gas/Oil pipeline security
Facilities
Airports, seaports
Traffic surveillance
26
WinLink 1000 VS - Bands
BandCon.
Int.
VS/F58/FCC/CMB/EXT
VS/F58/FCC/CMB/INT
VS/F54/ETSI/CMB/EXT
VS/F54/ETSI/CMB/INT
VS/F24/FCC/CMB/EXT
VS/F24/FCC/CMB/INT
5.9 GHz Universal V
5.8 GHz FCC/IC V
5.8 GHz WPC India V
5.4 GHz Universal V
5.3 GHz Universal V
4.9 GHz Universal V
5.8 GHz ETSI V
5.4 GHz ETSI V
2.4 GHz FCC/IC V
2.4 GHz Universal V
= Factory Default Band
27
Base Distribution Unit (BDU)
28
Now GA Release 6.2 replaces Release 6.1 beta
New enhancement Each of the 8 ports can be set to either ODU or 802.3af PoE
BDU
29
Applications
BDU is part of RADWIN’s Multiple Point-to-Point (MPtP) architecture, providing a complete Hub solution for communication networks.
Typical applications include: Corporate Access by Service Providers, WiFi/WiMAX Backhaul and Video Surveillance projects.
Uplink - Ethernet / TDM
30
Thank You
www.radwin.com