Racking Accessories - Systems Design · Racking Accessories By utilising the full range of...
2
Run Spacer Used to maintain a fixed parallel safety clearance between double sided runs of racking. Connects frames vertically, and ensures strength is fully maintained at the joints. Allows beams to be located upto the joint. Essential for stability, allow racking to be bolted to the floor. Four duties available, to complement specific requirements. Used in pairs across the beams, to support post pallets/stillages or caged pallets which have corner posts, skids or feet. Bolted Jointing Unit 2 10 18 3 Frame Footplates Pallet Foot Support 4 20 16 12 13 14 19 17 15 11 7 6 4 5 1 2 3 8 1 Racking Accessories By utilising the full range of accessories you can improve your warehouse operation and, as we are the original manufacturer, you can be sure they are right for the job. page 14
Transcript of Racking Accessories - Systems Design · Racking Accessories By utilising the full range of...
Run Spacer
Used to maintain a fixed parallel safety clearance between doublesided runs of racking.
Connects frames vertically,and ensures strength is fullymaintained at the joints.Allows beams to be locatedupto the joint.
Essential for stability, allowracking to be bolted to thefloor. Four duties available,to complement specificrequirements.
Used in pairs across thebeams, to support postpallets/stillages or cagedpallets which have cornerposts, skids or feet.
Bolted Jointing Unit2
10
18
3 Frame Footplates Pallet Foot Support4
20
1612
13
14
19
17
15
11
7
6
4
5
1
2
3
8
1
Racking AccessoriesBy utilising the full range of accessories you can improve your warehouse operation and, as weare the original manufacturer, you can be sure they are right for the job.
page 14
Used in pairs across beams,to provide fork entry spaces.Provides support for andaccess to non-palletisedloads.
Steel Shelf Panels9
Upright Protectors
Protect the lower sectionof XL uprights against forktruck collision damage. Available in ‘U’-shaped orright-angled configuration.
13
Sprinkler Systems17
Can be supported withinthe racking structure.
Fork Spacer5
Panels span and sit within apair of stepped beamsproviding minimising theshelf thickness. Made frompre-galvanised steel.
Locates on the front andrear beams, and cradles theends of a drum or barrel. Prevents lateral rolling ofdrums or cylindrical items.Used in pairs.
Shelf Support10
Rack End Protector
Provides protection to theends of racking. Availablealso as a barrier rail (withsupport posts) to protectequipment and walkways.
14
Frame Cladding18
Available to suit specificapplications.
Drum Chock6
Fitted to stepped beams,to provide additionalsupport and greaterloading capacity forchipboard shelving.
Spans beams to providelocation and support forcoiled materials - metalstrip, for example - or othercylindrical items.
Shelf Support11
Racking Signs
Clearly display caution andloading/safety informationrelating to racking usage,and conform withSEMA guidelines.
15
Safety Mesh Screens19
Fitted for safety, and thesecurity of palletised loads.Often fitted where awalkway or working area is adjacent to racking.
Coil Cradle7
Fitted to box beams, provides support andgreater load capacity forshelving. Cladding locationbracket also shown.
Panels span a pair of boxbeams to provide wide-bay steel shelving.Made from pre-galvanisedsteel.
Column Protector12
Guide Rails
Allow safe and accurateguidance for trucks operating within racking, particularly in drive-in ornarrow aisle applications.
16
P&D Stations20
Pick and Deposit (P&D) stations are used at the endof racks to assist in loadhandling between narrowaisle and other trucks.
Steel Shelf Panels8
Minimises the potentialdamage of forklift truckimpact to racking upright.Steel construction withfoam rubber insert.
page 15
