85600_R14_ErYAG_Handpiece_FiberTips_3.0.doc Page 1/6

R14-Compatible Fiber Tips

Conical, sapphire Diameter: 1.3 mm to 0.6 mm at distal end

Length: 8 mm

Maximum energy setting: 200 mJ

* Product code for ordering: 72937 for R14C and R14D (72938 for R14A and R14B)

This type of fiber tip is used for:

• All precise hard and soft tissue procedures in easy accessible but extremely tight and narrow spaces.

• The energy density at the same energy setting is higher, which means that results can be achieved at lower energy settings.

Conical, sapphire Diameter: 1.3 mm to 0.6 mm at distal end

Length: 12 mm

Maximum energy setting: 200 mJ

* Product code for ordering: 72857 for R14C and R14D (72675 for R14A and R14B)

This type of fiber tip is used for:

• All precise hard and soft tissue procedures in tight, narrow and deep spaces, such as incipient caries in deciduous teeth.

Conical, sapphire Diameter: 1.3 mm to 0.6 mm at distal end

Length: 16 mm

Maximum energy setting: 200 mJ

* Product code for ordering: 85830

This type of fiber tip is used for:

• All precise hard and soft tissue procedures in tight, narrow and deep spaces, such as incipient caries in deciduous teeth.

Chiseled, sapphire Diameter: 1.5 mm to 1.5 x 0.5mm at distal end

Length: 12 mm

Maximum energy setting: 200 mJ

* Product code for ordering: 72561 for R14C and R14D (70414 for R14A and R14B)

This type of fiber tip is used for:

• Periodontics – closed curettage, the removal of subgingival concrements and granulation tissue.

• Effective and efficient removal of infected soft tissue.

85600_R14_ErYAG_Handpiece_FiberTips_3.0.doc Page 2/6

Conical, sapphire Diameter: 1.3 mm to 0.8 mm at distal end

Length: 8 mm

Maximum energy setting: 350 mJ

* Product code for ordering: 72560 for R14C and R14D (70415 for R14A and R14B)

This type of fiber tip is used for:

• All hard tissue procedures where a thinner fiber tip is required to reach the treatment site, for example on the lateral sides of the tooth or to treat sites very close to the gingiva in cases of caries removal.

• All precise soft tissue surgery.

Conical, sapphire Diameter: 1.3 mm to 0.8 mm at distal end

Length: 12 mm

Maximum energy setting: 350 mJ

* Product code for ordering: 72856 for R14C and R14D (72674 for R14A and R14B)

This type of fiber tip is used for:

• All hard tissue procedures where thinner fiber tip is required for deeper and harder-to-reach sites, for example in the case of fissure sealing.

• All precise soft tissue surgery.

Cylindrical, quartz Diameter: 1 mm

Length: 8 mm

Maximum energy setting: 600 mJ

* Product code for ordering: 69082 for R14C and R14D (65320 for R14A and R14B)

This type of fiber tip is used for:

• All cavity preparations, caries removal and soft tissue procedures in areas where a smaller fiber tip diameter is required to reach the caries tissue.

Cylindrical, quartz Diameter: 1 mm

Length: 12 mm

Maximum energy setting: 600 mJ

* Product code for ordering: 72559 for R14C and R14D (68678 for R14A and R14B)

This type of fiber tip is used for:

• All cavity preparations, caries removal and soft tissue procedures in deeper or harder-to-reach sites where a smaller fiber tip diameter is required to reach the caries tissue.

85600_R14_ErYAG_Handpiece_FiberTips_3.0.doc Page 3/6

Cylindrical, sapphire – Extra High Durability Tip Diameter: 1,3 mm

Length: 8 mm

Maximum energy setting: 600 mJ

* Product code for ordering: 71766 for R14C and R14D (70988 for R14A and R14B)

This type of fiber tip is used for:

• All cavity preparations and caries removal in easily accessed areas such as the mesial part of the tooth as well as soft tissue procedures such as gingivectomy, frenectomy, open curettage and oral surgery.

• Ideally suited for use with higher energy (from 400 mJ upwards) settings.

Cylindrical, sapphire - Extra High Durability Tip Diameter: 1,3 mm

Length: 12 mm

Maximum energy setting: 600 mJ

* Product code for ordering: 72558 for R14C and R14D (71763 for R14A and R14B)

This type of fiber tip is used for:

• All cavity preparations, caries removal and soft tissue procedures in deeper or harder-to-reach caries tissue sites.

• Ideally suited for use with higher energy (from 400 mJ upwards) settings.

PRECISO 300/20 Properties: Cylindrical, flexible, quartz

Diameter: 0,3 mm

Length: 20 mm

Maximum settings: Power ≤ 1 W, Energy ≤ 60 mJ

* Product code for ordering: 83890 for R14C

This type of fiber tip is used for:

• Endodontic procedures; root canal cleaning

85600_R14_ErYAG_Handpiece_FiberTips_3.0.doc Page 4/6

PRECISO 300/14 Properties: Cylindrical, flexible, quartz

Diameter: 0,3 mm

Length: 14 mm

Maximum settings: Power ≤ 1 W, Energy ≤ 60 mJ

* Product code for ordering: 85330 for R14C

This type of fiber tip is used for:

• Endodontic procedures; root canal cleaning

PIPS™ 300/14 Properties: Sleeveless & tapered end, quartz

Diameter: 0,3 mm

Length: 14 mm

Maximum settings: Power ≤ 1 W, Energy ≤ 40 mJ

Available in the U.S.A only * Product code for ordering: 85332 for R14C

This type of fiber tip is used for:

• Endodontic procedures; root canal cleaning

PIPS™ 400/14 Properties: Sleeveless & tapered end, quartz

Diameter: 0,4 mm

Length: 14 mm

Maximum settings: Power ≤ 1 W, Energy ≤ 40 mJ

Available in the U.S.A only * Product code for ordering: 85331 for R14C

This type of fiber tip is used for:

• Endodontic procedures; root canal cleaning

85600_R14_ErYAG_Handpiece_FiberTips_3.0.doc Page 5/6

VARIAN 400/9 Properties: Cylindrical, quartz

Diameter: 0,4 mm

Length: 9 mm

Maximum settings: Power ≤ 1,5 W, Energy ≤ 100 mJ

* Product code for ordering: 84826 for R14C

This type of fiber tip is used for:

• Periodontic procedures

VARIAN 400/14 Properties: Cylindrical, quartz

Diameter: 0,4 mm

Length: 14 mm

Maximum settings: Power ≤ 1,5 W, Energy ≤ 100 mJ

* Product code for ordering: 84827 for R14C

This type of fiber tip is used for:

• Periodontic procedures

VARIAN 500/9 Properties: Cylindrical, quartz

Diameter: 0,5 mm

Length: 9 mm

Maximum settings: Power ≤ 2 W, Energy ≤ 125 mJ

* Product code for ordering: 84836 for R14C

This type of fiber tip is used for:

• Periodontic procedures

85600_R14_ErYAG_Handpiece_FiberTips_3.0.doc Page 6/6

VARIAN 500/14 Properties: Cylindrical, quartz

Diameter: 0,5 mm

Length: 14 mm

Maximum settings: Power ≤ 2 W, Energy ≤ 125 mJ

* Product code for ordering: 84837 for R14C

This type of fiber tip is used for:

• Periodontic procedures

VARIAN 600/9 Properties: Cylindrical, quartz

Diameter: 0,6 mm

Length: 9 mm

Maximum settings: Power ≤ 2 W, Energy ≤ 150 mJ

* Product code for ordering: 84838 for R14C

This type of fiber tip is used for:

• Periodontic procedures

VARIAN 600/14 Properties: Cylindrical, quartz

Diameter: 0,6 mm

Length: 14 mm

Maximum settings: Power ≤ 2 W, Energy ≤ 150 mJ

* Product code for ordering: 84839 for R14C

This type of fiber tip is used for:

• Periodontic procedures