R ea tta c h i n g S I M c l i p - E a s y F l i p
3
Horizontal channel for the clip 1 Horizontal channel for the clip The long borders of each channel should be straight and parallel to one another. If they are not as per the above picture, please gently straighten. SIM clip - has two arms with a round notch on the end of each. Positioning these notches in the horizontal channels secures the clip to the SIM slot. Make sure both pins are straight. You can easily straighten them if needed. Reattaching SIM clip - EasyFlip 2 Channel: long borders are straight and parallel to one another. Olitech Technology
Transcript of R ea tta c h i n g S I M c l i p - E a s y F l i p
Horizontalchannel for the
clip
1
Horizontalchannel for the
clip
The long borders of each channelshould be straight and parallel to one
another. If they are not as per theabove picture, please gently straighten.
SIM clip - hastwo arms with around notch onthe end of each.
Positioningthese notches in
the horizontalchannels
secures the clipto the SIM slot.
Make sure bothpins are straight.
You can easilystraighten them if
needed.
Reattaching SIM clip - EasyFlip
2
Channel: long borders are straightand parallel to one another.
Olitech Technology
Position the notch on one of the SIM clip arms in thehorizontal channel.
1.
2. After the first notch is in the horizontal channel, the notchon the second arm will sit on top of the remaining channel.
Slightly position the clip towards the unsecured side to placethe remaining notch into the remaining channel.
3
1 2
Position the notches on theSIM clip in the horizontalchannels of the SIM slot
Olitech Technology
Confirm placement4
Both notches on the SIM clip arms should now be in the horizontalchannels of the SIM slot. You should be able to hinge the SIM clip
from the arms and slide into/out of the locked position.
If you require further assistance with instructions or tophysically attach the SIM clip please contact Olitech on
03 9755 8885 or [email protected]
Olitech Technology
