QUICKTRONIC QTz8 - chem17
5
QUICKTRONIC QTz8 BU LE APAC, Edition: 28.06.2013. Subject to change without notice. TECHNICAL INFORMATION QUICKTRONIC ECG for T8/∅26mm linea QTz8 All you need for the reliable QUICKTRONIC QTz is the afforda the affordable high frequency solut QUICKTRONIC QTz has a robust Safety, RFI, Harmonics and Immun energy costs. QTz is intended for use with indoor school, restaurants and other appli applications with frequent switching Ideal solution for CCG re EEI = A2 30,000 h lifetime at tc ma Automatic restart after la . Despite careful review, the possibility of mistakes cannot be excluded – no guaranty w QTz8 ar fluorescent lamps i.e. LUMILUX ® T8 operation of T8/∅26mm linear fluo able ECG solution to reliably operate fluorescent lam tion for CCG replacement design and meets relevant international standard re nity. Energy Efficiency A2 guarantees significant sav or lighting fixtures in applications like office, supermar lications. We recommend to use these ballasts not in ng. eplacement ax. with maximum 10% failure rate amp replacement will be provided. orescent lamps mps. It is egarding vings in rket, n
Transcript of QUICKTRONIC QTz8 - chem17
QUICKTRONIC QTz8
BU LE APAC, Edition: 28.06.2013. Subject to change without notice.
TECHNICAL INFORMATION
QUICKTRONIC
ECG for T8/ ∅∅∅∅26mm linear
QTz8
All you need for the reliable operation of T
QUICKTRONIC QTz is the affordable ECG solution to reliably operate fluorescent lamps.the affordable high frequency solution for
QUICKTRONIC QTz has a robust design and meets relevant international Safety, RFI, Harmonics and Immunityenergy costs.
QTz is intended for use with indoor lighting fixtures in applications like office, school, restaurants and other applications. We recommend to use these ballasts not in applications with frequent switching.
� Ideal solution for CCG replacement� EEI = A2 � 30,000 h lifetime at tc max� Automatic restart after lamp replacement
Subject to change without notice. Despite careful review, the possibility of mistakes cannot be excluded – no guaranty will be provided
QTz8 linear fluorescent lamps
i.e. LUMILUX® T8
All you need for the reliable operation of T 8/∅∅∅∅26mm linear fluorescent lamps
QUICKTRONIC QTz is the affordable ECG solution to reliably operate fluorescent lamps.the affordable high frequency solution for CCG replacement
QUICKTRONIC QTz has a robust design and meets relevant international standard regarding mmunity. Energy Efficiency A2 guarantees significant savings in
QTz is intended for use with indoor lighting fixtures in applications like office, supermarket, , restaurants and other applications. We recommend to use these ballasts not in
applications with frequent switching.
Ideal solution for CCG replacement
max. with maximum 10% failure rate restart after lamp replacement
no guaranty will be provided.
6mm linear fluorescent lamps
QUICKTRONIC QTz is the affordable ECG solution to reliably operate fluorescent lamps. It is
standard regarding Energy Efficiency A2 guarantees significant savings in
supermarket, , restaurants and other applications. We recommend to use these ballasts not in
QUICKTRONIC QTz8
BU LE APAC, Edition: 28.06.2013. Subject to change without notice. Despite careful review, the possibility of mistakes cannot be excluded – no guaranty will be provided.
TECHNICAL INFORMATION 02
Product Features:
• CELMA Energy Efficiency Index A2 • 30,000 h lifetime at tc max with maximum 10% failure rate • Reliable lamp ignition within wide temperature range: -15°C...+50°C • Automatic restart after lamp replacement 1) • Suitable for luminaries of protection classes I, protection II after testing • EMI acc. to EN 55015 • Suitable for lighting with max. 3 switching cycles per day • CCC, CE and RCM marking
Technical Data
Max. cable diameter for push-in contact [mm2]: S 1: 0.5 - 1.5 mm2
Starting time: t < 0.3s
Line voltage: 220 - 240 V
Voltage range (AC): 198 - 264 V
Line frequency: 50 / 60 Hz
Operating frequency: 40 kHz – 50k Hz
Power factor ≥ 0.95
Electrical strength: 280 V � 48 hours
Ambient temperature ta: -15°C to +50 °C
Measuring point temperature tc: Max. + 70 °C
U-OUT: ≤ 380V
Inrush current and max. number of ECG per circuit breaker
ECG Inrush Current Max. number of ECG per circuit breaker
Ip [A] TH [µs] B: 10A B: 16A C: 16 A
QTz8 1x18 20 130 34 56 94
QTz8 1x36 20 130 34 56 94
QTz8 2x18 20 130 34 56 94
QTz8 2x36 23 250 15 25 43
QTz8 3x18 23 250 15 25 40
QTz8 4x18 23 250 15 25 40
Lifetime Ambient Temperature ta
Measuring point temperature tc:
Lifetime with max. 10% failure rate
40°C 65 °C 50,000 h
50°C 70 °C 30,000 h
1 s = solid wire
QUICKTRONIC QTz8
BU LE APAC, Edition: 28.06.2013. Subject to change without notice.
TECHNICAL INFORMATION
Standards and approval marks
Dimensions & weight
Lamp wiring
QTz8 1x…
Max. permitted cable length in between ECG and lamp:
QTz8 2x…
Max. permitted cable length in between ECG and lamp:
Safety:
Radio interference:
Harmonic content:
Immunity:
Approval marks:
Description Length [mm]
Width [mm]
QTz8 1x18 150 4
QTz8 1x36 150 4
QTz8 2x18 150 4
QTz8 2x36 210 4
QTz8 3x18 210 4
QTz8 4x18 210 4
Subject to change without notice. Despite careful review, the possibility of mistakes cannot be excluded – no guaranty will be provided
tandards and approval marks
Max. permitted cable length in between ECG and lamp: 1.0 m (PIN 21, 22); 2.0 m (PIN 23, 24
cable length in between ECG and lamp: 1.0 m (PIN 21, 22, 23, 24); 2.0 m (PIN 25, 26)
acc. to EN 61347-2-3 / IEC 61347-2-3
acc. EN 55015: 2006 + A1: 2007 + A2: 2009
acc. to EN 61000-3-2 / IEC 61000-3-2
acc. to EN 61547 / IEC 61547
idth [mm]
Height [mm]
Distance Mounting
Holes [mm]
Weight [g]
40 28 140 90
40 28 140 90
40 28 140 90
40 30 200 120
40 30 200 140
40 30 200 145
no guaranty will be provided.
4)
m (PIN 25, 26)
QUICKTRONIC QTz8
BU LE APAC, Edition: 28.06.2013. Subject to change without notice.
TECHNICAL INFORMATION
QTz8 3x
Max. Permitted cable length in between ECG and lamp:
QTz8 4x
Max. Permitted cable length in between ECG and lamp: 29)
Logistic Data Description EAN 10
QTz8 1x18 4008321863263
QTz8 1x36 4008321863287
QTz8 2x18 4008321863300
QTz8 2x36 4008321863324
QTz8 3x18 4008321863348
QTz8 4x18 4008321863362
1): Regarding automatic restart after lamp
1-lamp and 2-lamp ballast: automatic restart after lamp is replaced 3-lamp and 4-lamp ballast: when any lamp fails,others lamps, ensure the master lamp is the last one to be
Subject to change without notice. Despite careful review, the possibility of mistakes cannot be excluded – no guaranty will be provided
cable length in between ECG and lamp: 1.0 m (PIN 21, 22, 23, 24); 2.0 m (PIN
cable length in between ECG and lamp: 1.0 m (PIN 20, 21, 22, 23); 2.0 m (PIN
EAN 40 Packaging Unit
4008321863263 4008321863270 20
4008321863287 4008321863294 20
4008321863300 4008321863317 20
4008321863324 4008321863331 20
4008321863348 4008321863355 20
4008321863362 4008321863379 20
Regarding automatic restart after lamp replacement:
automatic restart after lamp is replaced; when any lamp fails, remove all lamps, replace the failed one
the last one to be reconnected.
Master Lamp
Master Lamp
no guaranty will be provided.
m (PIN 25, 26, 27, 28)
m (PIN 24, 25, 26, 27, 28,
Packaging Unit
replace the failed one and reconnect
Master Lamp
Master Lamp
QUICKTRONIC QTz8
BU LE APAC, Edition: 28.06.2013. Subject to change without notice. Despite careful review, the possibility of mistakes cannot be excluded – no guaranty will be provided.
TECHNICAL INFORMATION 05
Lamp/ECG System Combination ECG Lamp HF lamp wattage
[W] System wattage [W] Line current [A]
Luminous flux at 25°C [lm]
Power factor [λ]
QTz8 1x18 L18 W 16 19 0.09 1350 0.98 QTz8 1x36 L36 W 32 37 0.19 3200 0.98
QTz8 2x18 2 x L18 W 2x 16 37 0.18 2x 1350 0.98 QTz8 2x36 2 x L36 W 2x 32 71 0.32 2x 3200 0.98 QTz8 3x18 3 x L18 W 3x 16 55 0.25 3x 1350 0.98 QTz8 4x18 4 x L18 W 4x 16 70 0.34 4x 1350 0.95
For more information, please refer to SharePoint: https://lightweb.osram.com/content/10000450/Product%20information/PL_TLS/Electronic%20control%20gears/T8_ECG/QTz8
