QuickSpecs HP StorageWorks NAS 8000

HP StorageWorks NAS 8000 solutions provide easily managed network-attached storage (NAS) solutions in dedicated storage and SAN configurations forcustomers that require file-sharing flexibility. With an HP operating system optimized for file serving, NAS 8000 solutions attach directly to Ethernet networks,and deliver- low maintenance and high uptime. Cluster technology is available for environments requiring mission-critical access to data.The NAS 8000 solutions support Windows®, UNIX®, and Linux. They allow IT managers to increase departmental and site storage quickly and easily withoutbringing down servers or disrupting client access to network data. The solutions scale easily to tens of TBs. They use hot swap fans, memory, and powersupplies for increased availability. Network administration, user access, and storage configurations are all easily managed through the Command View NASor command line interfaces. The NAS Data Path Manager software enables management and control of the data paths.

HP NAS 8000 Solution Feature SetHP NAS 8000 Solution Feature SetHP NAS 8000 Solution Feature SetHP NAS 8000 Solution Feature SetAn operating system optimized for storage and file serving.The Command View NAS web interface for server and array management.A Configuration Wizard that helps you set up your system.NAS Data Path Manager (Optional Software)

Support for EVA 5000 arraysFor Fiber Channel Management for all Supported Arrays:

Load Balancing featuresPerformance Monitoring of host bus adapter (HBA) throughputData Path failoverData Path control and status though the Command View NAS

Context-sensitive online help.On-line file system expansionPerformance Monitoring Tool

Metrics for overall NFS reads and writes, CPU loadReal-time ChartsHistory Charts (up to 2-weeks)Print ChartExport Data into Spreadsheet-friendly Format

Optional high availability system.Backup and disaster recovery options.Dynamic file system expansionNetwork configuration support for:

SNMP and SMTP notification of critical eventsRemote system log capabilitiesUPS connectionUser and group mappingSnapshots for quick retrieval of data that is inadvertently lost or deletedQuota managementSolution monitoringFully integrated virus protectionHP support and diagnostic toolsServer and array software upgrades

The NAS 8000 is structured to be Configure To Order. Each of the models is designed to be as flexible and complete as possible. The top level part numbers(A7414B, A7415B, A7416B, A7417B) are only use to setup configuration rules and signal the HP ordering systems to configure the parts as a completesolution, racking it if requested. Each of the part numbers can be ordered in many different configurations to meet customers' needs. This document showsthe major different configurations for each model. However there are options within each of the configurations provided. See the min and max columns inthe Configuration Tables at the end of this document. The best way to order these solutions is to use the Sales Builder for Windows sales tool.

QuickSpecs HP StorageWorks NAS 8000HP StorageWorks NAS 8000HP StorageWorks NAS 8000HP StorageWorks NAS 8000

Overview

DA - 11511 Worldwide — Version 4 — August 18, 2003

ModelsModelsModelsModels

Product Family ModelsProduct Family ModelsProduct Family ModelsProduct Family Models

Single server NAS solution in front of dedicated VA array(s A7414B

Two server clustered NAS solution in front of dedicated VA array(s) A7415B

NAS for SAN environments with two clustered NAS servers in front of XP, VA, EVA 5000, EMA & MA arrays A7416B

NAS 8000 cluster upgrade for transition from single server configuration to cluster configuration A7417B

These two models are not configurable and do not support HA. They are intended primarily for the channelThese two models are not configurable and do not support HA. They are intended primarily for the channelThese two models are not configurable and do not support HA. They are intended primarily for the channelThese two models are not configurable and do not support HA. They are intended primarily for the channelpartners:partners:partners:partners:

NAS 8000 Dedicated Storage Server – NAS 8000 Server with no storage, includes CPUs, NICs, HBAs & Software A7398B

NAS 8000 SAN Server – NAS 8000 Server with no storage, includes CPUs, NICs, HBAs & Software A7399B

Feature ListFeature ListFeature ListFeature List

CONTROLLABLE:CONTROLLABLE:CONTROLLABLE:CONTROLLABLE:

completecompletecompletecomplete: provides command line and Web interfaces – HP StorageWorks Command View NASmanageablemanageablemanageablemanageable: provides control and status of the data paths between the NAS server and the storage

RESILIENT:RESILIENT:RESILIENT:RESILIENT:

comprehensivecomprehensivecomprehensivecomprehensive: ensures data availability with basic and enhanced network backup and local backupreliablereliablereliablereliable: provides high uptime with available 24 x 7 x 365 telephone and Web supportadaptableadaptableadaptableadaptable: failures in the data path are detected and failover occurs without disruptionavailableavailableavailableavailable: maximizes uptime with clustering and redundant, hot-swappable componentssecuresecuresecuresecure: has native UNIX and Windows security, universal file locking, integrated virus protection

EXTENSIBLE:EXTENSIBLE:EXTENSIBLE:EXTENSIBLE:

integratedintegratedintegratedintegrated: functions with popular system management applications and backup solutionsextensiveextensiveextensiveextensive: operates with a wide range of applications for databases, Web serving, and e-mailflexibleflexibleflexibleflexible: operates with Windows 98/XP/NT/2000, UNIX, and Linux clientsscalablescalablescalablescalable: extends storage to 30TB attached to VA arrays, even more with SAN (EVA 5000, XP, VA & EMA arrays)

The NAS 8000 is structured to be Configure To Order. Each of the models is designed to be as flexible and complete as possible. The top level part numbers(A7414B, A7415B, A7416B, A7417B) are only use to setup configuration rules and signal the HP ordering systems to configure the parts as a completesolution, racking it if requested. Each of the part numbers can be ordered in many different configurations to meet customers' needs. This document showsthe major different configurations for each model. However there are options within each of the configurations provided. See the min and max columns inthe Configuration Tables at the end of this document. The best way to order these solutions is to use the Sales Builder for Windows sales tool.

Included in the all configurationIncluded in the all configurationIncluded in the all configurationIncluded in the all configurationNAS 8000 server- base configurationNAS 8000 server- base configurationNAS 8000 server- base configurationNAS 8000 server- base configuration A7418B

Operating SystemOperating SystemOperating SystemOperating System HP NAS O/S with Command View NAS management software

Integrated SoftwareIntegrated SoftwareIntegrated SoftwareIntegrated Software HP Virus Guard, HP OpenView Storage Data Protector Agent, and NDMP server support

ProcessorProcessorProcessorProcessor 2 Intel Xeon Processors at 1.9 GHz standard (up to 4 supported)

Cache MemoryCache MemoryCache MemoryCache Memory 1 MB Integrated Level 3 Cache

MemoryMemoryMemoryMemory 2048 MB PC1600 registered ECC SDRAM (4x1 interleaved memory)

Network ControllerNetwork ControllerNetwork ControllerNetwork Controller HP NC3134 Dual 10/100 Tx Server Adapter

Storage ConnectivityStorage ConnectivityStorage ConnectivityStorage Connectivity 2 FCA2101 2 Gb FC HBAs

ManageabilityManageabilityManageabilityManageability Integrated Lights-Out (iLO) Standard management


Overview


SSP for non-HA dedicated storageSSP for non-HA dedicated storageSSP for non-HA dedicated storageSSP for non-HA dedicated storage A7414B

Entry option for NAS file servingEntry option for NAS file servingEntry option for NAS file servingEntry option for NAS file servingDedicated storage managed completely by the NAS serverSelf contained solution easily managed from the graphical user interfaceSingle pool of storage for file serving only

Configuration 1: non-HA dedicated storage with va7110 arrayConfiguration 1: non-HA dedicated storage with va7110 arrayConfiguration 1: non-HA dedicated storage with va7110 arrayConfiguration 1: non-HA dedicated storage with va7110 array A7414B

Configuration 2: non-HA dedicated storage with va7410 arrayConfiguration 2: non-HA dedicated storage with va7410 arrayConfiguration 2: non-HA dedicated storage with va7410 arrayConfiguration 2: non-HA dedicated storage with va7410 array A7414B

SSP for HA dedicated storageSSP for HA dedicated storageSSP for HA dedicated storageSSP for HA dedicated storage A7415B

Dedicated storage managed completely by the NAS serverFull integration with MC/ServiceGuard with IP address and file system fail overConfigurable for Active/Active or Active/Passive 2-way clustersCluster synchronization and setup is built in to the Command View NAS Configuration WizardAutomatic and manual (for maintenance) fail-over and fail-backSelf contained solution that is easily managedSingle pool of storage for file serving only

Configuration 1: HA dedicated storage with single va7410 arrayConfiguration 1: HA dedicated storage with single va7410 arrayConfiguration 1: HA dedicated storage with single va7410 arrayConfiguration 1: HA dedicated storage with single va7410 array A7415B

Configuration 2: HA dedicated storage with dual va7410 arraysConfiguration 2: HA dedicated storage with dual va7410 arraysConfiguration 2: HA dedicated storage with dual va7410 arraysConfiguration 2: HA dedicated storage with dual va7410 arrays A7415B

SSP for SAN attached solutionsSSP for SAN attached solutionsSSP for SAN attached solutionsSSP for SAN attached solutions A7416B

HA and non-HA configurationsSupported arrays (VA7100, VA7110, VA7400, VA7410, EVA 5000, XP, MA, or EMA)EVA 5000 support requires HP StorageWorks NAS Data Path Manager. However, the operating system solution kit for the EVA is NOT required.NAS server is a consumer of LUNs, but the storage pool is managed by SAN managementSingle pool of storage used for application servers and NAS serversFull integration with MC/ServiceGuard with IP address and file system fail overConfigurable for Active/Active or Active/Passive 2-way clustersCluster synchronization and setup is built in to the Command View NAS Configuration WizardAutomatic and manual (for maintenance) fail over and fail-backHP StorageWorks NAS Data Path Manager required HA configurations

Configuration 1: non-HA SAN solutionConfiguration 1: non-HA SAN solutionConfiguration 1: non-HA SAN solutionConfiguration 1: non-HA SAN solution A7416B

Configuration 2: HA SAN solutionConfiguration 2: HA SAN solutionConfiguration 2: HA SAN solutionConfiguration 2: HA SAN solution A7416B

Other solutions are available. See Sales Builder for Windows for complete configuration possibilities.Other solutions are available. See Sales Builder for Windows for complete configuration possibilities.Other solutions are available. See Sales Builder for Windows for complete configuration possibilities.Other solutions are available. See Sales Builder for Windows for complete configuration possibilities.


Overview


Software FeaturesSoftware FeaturesSoftware FeaturesSoftware Features Snapshot functionality, quota management (default, soft, and hard quotas), Windows NT® pass-through authentication,NAS disaster recovery protection, NIC channel bonding, telnet, e-mail alerts, SNMP, NDMP, Web browser management;supports Windows 98/XP/NT/2000, HP-UX, SUN Solaris, Red Hat Linux, SCO UnixWare, and IBM AIX; all software factorypre-configured; typical system startup in minutes.

ClusterClusterClusterCluster The HP NAS 8000 cluster has two NAS servers that function as one complete system to provide fail over services for eachother. The HA configuration uses fully integrated MC/ServiceGuard functionality to provide two-way clustering, SMB/CIFSand NFS fail-over, active/active and active/passive, automatic and manual fail over. Cluster management allows the NASservers to be managed as one device through the Command View NAS interface.The main purpose of high-availability clusters is to provide a higher degree of storage availability to client systems than ispossible with a single server. This is accomplished by eliminating single points of failure and providing functionalredundancy. Uninterrupted service is provided by failing over file serving capabilities to a secondary NAS server when one ofthe clustered NAS servers fails.

Operating SystemOperating SystemOperating SystemOperating System The HP NAS 8000 operating system is optimized for file serving in heterogeneous (CIFS and NFS) network environments.The appliance-like nature of the OS ensures robustness, manageability and efficiency for the IT Administrator. The NAS8000 OS provides the base feature set for robust, high performance file serving in UNIX, Windows, and mixedUNIX/Windows environments from either a dedicated storage array or a SAN. It supports NFSv2 (UNIX clients), NFSv3(UNIX clients), and CIFS (Window clients) file serving protocols. For Windows clients, the NAS 8000 OS implements acomplete Windows ACL (Access Control List) implementation, modeled from Windows 2000 semantics.

Administration InterfaceAdministration InterfaceAdministration InterfaceAdministration Interface HP Command View NAS management software is a graphical user interface that runs in a web browser. This softwareprovides an easy-to-use interface for configuring, managing, and monitoring the NAS 8000. Some of the highlights ofCommand View NAS are:

A Configuration Wizard, which leads the installer or administrator through the NAS 8000 configuration tasks. Thesesame tasks are available outside of the Wizard format for post-installation changes.A status page that provides quick access to the NAS server status, clustering status (for high-availabilityconfigurations), and array status for any dedicated arrays.A storage management page that facilitates the setup and management of user storage, including the creation offile volumes, SMB shares, NFS exports, snapshots and user/group quotas.An applications page, which allows easy access to the graphical user interfaces associated with the Anti-Virus,OpenView Storage Data Protector, NDMP and snapshot applications.A support page that provides access to system logs, logs and diagnostics for dedicated arrays, software licenses, andlinks to HP's support Web site and the NAS O/S upgrades.Context-sensitive help, installation and user guides, and command reference.Access to Command View SDM is provided for configurations with dedicated arrays to allow advanced arraymanagement.Performance monitoring tool provides chart, graphs and spreadsheet friendly data of the NFS performance andCPU utilization.

HP Command View NAS supports all of the NAS 8000 configurations: dedicated arrays, high availability, and SAN.

File SizeFile SizeFile SizeFile Size Maximum file system size is 2 TB; Maximum file size is 2 TB; Supports up to 250 File Systems

Diagnostics andDiagnostics andDiagnostics andDiagnostics andPredictive MonitoringPredictive MonitoringPredictive MonitoringPredictive Monitoring

Integrated-Lights-Out (iLo) Card support – enables secure remote access to the console for diagnostics, boot from virtualfloppy capability.Environmental and system monitoring with SNMP alerts, performance monitoring.

Network Interface andNetwork Interface andNetwork Interface andNetwork Interface andProtocolsProtocolsProtocolsProtocols

DHCP, TCP/IP, NFS v2 and v3, CIFS/SMB, SMTP, DNS, NIS, Multiple Master Domain, NDMP (v2 and v3), Dual-port10/100 Base-T standard; additional 10/100 Base-T and Gigabit NICs optional.


Software Features


System Management ToolsSystem Management ToolsSystem Management ToolsSystem Management Tools Functions with popular systems management applications, including HP OpenView Network Node Manager, HP Toptools,CA Unicenter TNG, IBM Tivoli NetView, and BMC Patrol

Optional SoftwareOptional SoftwareOptional SoftwareOptional Software HP StorageWorks NAS Data Path Manager (A7423A)HP StorageWorks NAS Data Path Manager (A7423A)HP StorageWorks NAS Data Path Manager (A7423A)HP StorageWorks NAS Data Path Manager (A7423A) – Provides the administrator with control and status of thedata paths between the NAS server and the storage device.Data path failures are detected and failover will occur internal to the NAS 8000 server without disruption. Load balancingis provided to maximize the data path routes. A graphical user interface has been developed for administrative control andstatus. This interface allows routes to be designated as active or failover paths. It will also report failures and display currentstatus of the operational paths. This optional software activates the performance monitoring of the host bus adaptersthroughput.

ApplicationsApplicationsApplicationsApplications Compatible with MS SQL2000, MS Exchange 5.5, and Lotus Domino R5 mail servers, and Microsoft IIS (4.0 and 5.0) andApache Web servers.

Virus Detection andVirus Detection andVirus Detection andVirus Detection andProtectionProtectionProtectionProtection

Fully integrated virus protection with HP Virus Guard. A one-year license to upgrade the virus signatures is included withthe HP NAS 8000 system. HP Virus Guard removes the burden and the need for an external virus-scanning tool to scan NAS8000 storage giving you the confidence of virus-free storage by providing real-time protection for the storage on the NAS8000 with no additional hardware requirements.With CIFS real-time protection guarding the NAS 8000, the storage is protected. Any virus that is written to the storage willimmediately be detected. Administrators may choose to automatically and immediately delete, quarantine, or clean thevirus based on their specific requirements.HP Virus Guard also provides everything needed to schedule updates of virus-signature files so that it will always be able todetect the latest viruses. HP Virus Guard also provides the ability to schedule periodic virus scans.

BackupBackupBackupBackup HP OpenView Data Protector 5.0 (full agent integration), NDMP certification for VERITAS NetBackup and NDMP supportand network backup for Legato NetWorker; Computer Associates Intl. BrightStor ARCserve (basic network only), VERITASBackup Exec (basic network only), IBM Tivoli Storage Manager (basic network only).

SupportSupportSupportSupport 3-year on-site parts and labor, next-business day delivery of customer-replaceable parts and on-site support; optionalinstallation, 24 x 7 support available in selected regions.See http://www.hp.com/go/nas.NOTE: NOTE: NOTE: NOTE: This Web site is available in English only.

Globalization andGlobalization andGlobalization andGlobalization andLocalizationLocalizationLocalizationLocalization

CIFS and NFS unicode data; English manuals and Web interface.


Tools Features


http://www.hp.com/go/nas.

ProcessorsProcessorsProcessorsProcessors 2 Intel Xeon Processor MP at 1.90 GHz/1 MB in the base server (A7418B)A7398B and A7399B ship with 4 processors

Cache MemoryCache MemoryCache MemoryCache Memory 1 MB Integrated Level 3 Cache

UpgradabilityUpgradabilityUpgradabilityUpgradability Upgradable to quad processing

ChipsetChipsetChipsetChipset ServerWorks Grand Champion-HE chipset

NOTE: NOTE: NOTE: NOTE: For more information regarding ServerWorks, please see the following URL:http://www.serverworks.com/products/overview.htmlNOTE: NOTE: NOTE: NOTE: This Web site is available in English only.

MemoryMemoryMemoryMemory StandardStandardStandardStandard 2048 MB 200-MHz Double Data Rate (DDR) SDRAM (PC1600 Registered SDRAM Memorywith Advanced ECC functionality). Recommendation: only 2GB of memory (either standalone or mirrored)

OptionalOptionalOptionalOptional Hot plug mirrored memory - 2048 MB 200 MHz Double Data Rate (DDR) SDRAM(PC1600 Registered SDRAM Memory with Advanced ECC functionality) via 2nd memoryexpansion board and 4x512 memory modules

NOTE: NOTE: NOTE: NOTE: Advanced ECC Memory Technology protects the data even in the event of an entire SDRAM component failure.Embedded in the chipset design, this feature allows the use of Industry-Standard Registered DIMMs.

Network ControllerNetwork ControllerNetwork ControllerNetwork Controller NC3134 expandable Dual-port 10/100TX server adapter in a slot

ManageabilityManageabilityManageabilityManageability Integrated Lights-Out (iLO) Standard Management

Internal StorageInternal StorageInternal StorageInternal StorageControllerControllerControllerController

Smart Array 5i Plus Controller, Ultra3 SCSI (set up as RAID 1 across 2 internal hard drives).

64 MB total memory for code, transfer buffers, and read/write cache on the 5i Plus Memory ModuleThe Battery-Backed Write Cache (BBWC) Enabler protects write cache memory from hard boot, power, controller, orsystem board failures.

Internal Storage DevicesInternal Storage DevicesInternal Storage DevicesInternal Storage Devices(Service Use Only)(Service Use Only)(Service Use Only)(Service Use Only)

Diskette DriveDiskette DriveDiskette DriveDiskette Drive 1.44 MB (slim line) – ejectable for security and serviceability

CD-ROMCD-ROMCD-ROMCD-ROM 24x IDE CD-ROM Drive (slim line) – ejectable for security and serviceability

Hard DrivesHard DrivesHard DrivesHard Drives 2 x 36.4 GB SCSI drives

Form FactorForm FactorForm FactorForm Factor Rack (4U = 7 inches), ships with sliding rails and cable management system

Space saving 4U form factor provides space efficiencies while providing maximum deployment flexibility


Hardware Features - NAS Server


http://www.serverworks.com/products/overview.html

Intelligent ManageabilityIntelligent ManageabilityIntelligent ManageabilityIntelligent Manageability Integrated Lights-Out (iLO) Standard Management

Virtual Text Remote ConsoleVirtual Power Button ControlDedicated LAN ConnectivityAutomatic IP Configuration via DHCP/DNS/WINSIndustry Standard 128-bit Secure Sockets Layer (SSL) SecurityIML and iLO Event LoggingSupport for 12 user accounts with customizable access privileges

Integrated Lights-Out (iLO) Advanced Pack (supports Advanced features such as Graphical Remote Console and VirtualFloppy - Standard)Automatic Server Recovery-2 (ASR-2)

AvailabilityAvailabilityAvailabilityAvailability Smart Array 5i Plus Controller with standard Battery Backed Write Cache (BBWC) Enabler provides transportabledata protection and increases overall controller performance. 64 MB Battery Backed Write Cache protectionRedundant Cooling Zones across major server subsystems (Memory, I/O, CPU) provide 7x24 cooling. Each zone isindependent of each other and is able to support n+ 1 redundancy, as indicated below:PCI-X expansion zone is 1+ 1 redundant (fans 1 and 2)Memory zone is 1+ 1 redundant (fans 3 and 4)CPU zone is 2+ 1 redundant (fans 5, 6, and 7)

This zone configuration enables the server to withstand up to three fan failures, provided that they are not within the samezone. Each fan is hot plug redundant and individually removable.

Advanced Memory Protection Technology – delivers unsurpassed memory protection and server availability:Online Spare Memory

Offers a higher level of memory protection than Advanced ECC alone. If the number of single-bit correctable errors on abank exceeds the pre-defined error threshold, that bank will fail over to the online spare bank without intervention or serverinterruption. Online spare memory can be configured across one or two memory cards. The failed memory can then bereplaced at the user's convenience during a scheduled maintenance window.

Single-Board Mirrored Memory

Single-board mirrored memory provides a higher level of availability than Advanced ECC and Online Spare Memorybecause it protects against multi-bit errors. Single-board Mirrored Memory uses mirrored banks on a single memory boardthat is configured with one redundant bank of memory. The system writes to both banks, but reads from one. If a DIMM(s)has a multi-bit error, the system simply reads from the mirrored bank instead. This process occurs without intervention orserver interruption, and the failed DIMM can be replaced during a regularly scheduled shutdown.

Hot Plug Mirrored Memory

Hot Plug Mirrored Memory is a fault-tolerant memory feature that provides a higher level of availability than AdvancedECC, Online Spare Memory, or Single-Board Mirrored Memory because it protects against multi-bit errors and does notrequire any server downtime to replace failed DIMMs. Hot Plug Mirrored Memory requires that two memory boards beinstalled, one an exact mirror of the other, which run in parallel and provide protection against multi-bit memory errors.When configured for Hot Plug Mirrored Memory, the system writes to both memory boards, but reads from one. If a readerror occurs, the system fails over to the redundant memory board. At that point the memory board containing the failedDIMMs can be hot replaced. Once the failed DIMMs are replaced and the memory board is re-installed into the server, thesystem goes back to full mirrored status. All this occurs without bringing the server down.

NOTE: NOTE: NOTE: NOTE: Hot Plug Mirrored Memory and Dual-Board Online Spare Memory require the use of two memory boards. AllDL580 G2 servers ship standard with a single memory board. The second memory board is optional (P/N 203320-B21).

NOTE: NOTE: NOTE: NOTE: All HP Advanced Memory Protection modes are user configurable through the ROM-Based Setup Utility (RBSU)and viewable through HP Insight Manager 7 (CIM 7) and the Integrated Management Log (IML.).

Four Hot Plug Drive Bays (Two Left open)Duplex SCSI BackplaneDual Hot Plug Redundant Power Supplies




ServiceabilityServiceabilityServiceabilityServiceability Innovative Diagnostic LightingQuickFind Diagnostic Display – precisely depicts all major subsystems of the server (PCI-X I/O, Memory, CPU,Redundant Cooling, Interlock, Thermtrip) and gives instant visual indication of fault status. Located on top front ofserver.LED display on front panel indicates power, internal health, external health, Unit ID light.LED display on Memory board indicates Memory status, health, and protection mode.Tool-less, virtually cable-less interior design

Tool-less access to interior of serverTwo ejectable, slim line media drives (diskette and CD-ROM standard with support for optional DVD-ROMdrives) are removable without the use of toolsFront access power suppliesSpring-loaded memory board release latches prevent unseating incidentsPCI Card Guides locks full length PCI cards in place during transitSCSI Duplex/Simplex Drive Cage connects directly to system board – no cables.Seven individually removable fans connect without cables to the system boardProcessor/VRM Retention Cage securely locks both processor and VRM into their respective socketsTool-less removal of system board

Quick Deploy RailsTool-less design "snap in" rai

Power SupplyPower SupplyPower SupplyPower Supply 800 Watt (low line or high line) Hot Plug Power SupplyNOTE: NOTE: NOTE: NOTE: Two 800 Watt Hot Plug Power Supplies ship standard

System FansSystem FansSystem FansSystem Fans Standard 7 Hot plug, redundant fans (individually removable)

Maximum 7 Hot plug, redundant fans (individually removable)

Redundant Cooling Zones across major server subsystems (Memory, I/O, CPU) provide 7x24 cooling. Each zone isindependent of each other and is able to support n+ 1 redundancy, as indicated below:

PCI-X expansion zone is 1+ 1 redundant (fans 1 and 2)Memory zone is 1+ 1 redundant (fans 3 and 4)CPU zone is 2+ 1 redundant (fans 5, 6, and 7)

This zone configuration enables the server to withstand up to three fan failures, provided that they are not within thesame zone. Each fan is hot plug redundant and individually removable.

A Diskette Drive eject button

B Ejectable: 24x IDE CD-ROM (Slimline)

C Ejectable: 1.44-MB Diskette Drive (Slimline)

D CD-ROM Drive eject button

E 800-Watt (low line or high line) Redundant Hot Plug Power Supply

F 800-Watt (low line or high line) Primary Hot Plug Power Supply

0-1 Wide Ultra3 ready Drive Cage Duplex is the shipping configuration




System Unit RackSystem Unit RackSystem Unit RackSystem Unit Rack Chassis Footprint Chassis Footprint Chassis Footprint Chassis Footprint (HxWxD) 6.94 x 19 x 26.5 in (17.6 x 48.3 x 67.3 cm)

WeightWeightWeightWeight 81 lb/36.7 kg

Input RequirementsInput RequirementsInput RequirementsInput Requirements Rated Input Voltage 100 to 120 VAC/200 to 240 VAC

Rated Input Frequency 50 to 60 Hz

Input Power 1135W @ 110 VAC/1125W @ 220 VAC

Rated Input Current 12A (100 VAC), 9.8A (120 VAC), 4.9A (220 VAC)

Max BTU RatingMax BTU RatingMax BTU RatingMax BTU Rating 4000 BTU

Power Supply OutputPower Supply OutputPower Supply OutputPower Supply OutputPowerPowerPowerPower (per power supply)

Rated Steady-State Power 800W/800W (lowline/highline

Maximum Peak Power 800W/800W (lowline/highline)

Temperature RangeTemperature RangeTemperature RangeTemperature Range Operating 50° to 95° F (10° to 35° C)

Non-operating -20° to 140° F (-29° to 60° C)

Shipping -22° to 122° F (-30° to 50° C)

Relative HumidityRelative HumidityRelative HumidityRelative Humidity(non-condensing)

Operating 20% to 80%

Non-operating 5% to 90%

Maximum Wet BulbMaximum Wet BulbMaximum Wet BulbMaximum Wet BulbTemperatureTemperatureTemperatureTemperature

101.7°F/38.7°C

Acoustic NoiseAcoustic NoiseAcoustic NoiseAcoustic Noise Idle(Fixed Disk Drives Spinning)

LLLL WAd (BELS) 7.24

LLLL pAm (dBA) 60.7

Operating(Random Seeks to Fixed Disks)

LLLL WAd (BELS) 7.25

L L L L pAm (dBA) 60.8


Hardware Specifications


Power SpecificationsPower SpecificationsPower SpecificationsPower SpecificationsPower Supply Part NumberPower Supply Part NumberPower Supply Part NumberPower Supply Part Number 192147-001

Power Supply Spare KitPower Supply Spare KitPower Supply Spare KitPower Supply Spare Kit 278535-B21

Operational Input Voltage Range Operational Input Voltage Range Operational Input Voltage Range Operational Input Voltage Range (V rms) 90 to 264

Frequency RangeFrequency RangeFrequency RangeFrequency Range (Nominal) (Hz) 47 to 63 (50/60)

Nominal Input Voltage (Vrms)Nominal Input Voltage (Vrms)Nominal Input Voltage (Vrms)Nominal Input Voltage (Vrms) 100100100100 115115115115 208208208208 220220220220 230230230230 240240240240

Max Rated Output Wattage Rating 800 800 800 800 800 800

Nominal Input Current (A rms) 12.0 10.2 5.2 4.9 4.7 4.5

Max Rated Input Wattage Rating (Watts) 1143 1111 1067 1067 1067 1053

Max. Rated VA (Volt-Amp) 1203 1170 1088 1088 1088 1074

Efficiency (%) 70 72 75 75 75 76

Power Factor 0.95 0.95 0.98 0.98 0.98 0.98

Leakage Current (mA) 0.43 0.50 .90 .96 1.00 1.04

Maximum Inrush Current (A peak) 25 25 25 25 25 25

Maximum Inrush Current duration (mS) 20 20 20 20 20 20

System SpecificationsSystem SpecificationsSystem SpecificationsSystem SpecificationsNAS Server Fully ConfiguredNAS Server Fully ConfiguredNAS Server Fully ConfiguredNAS Server Fully Configured

Up to 4 Processors, 16 Memory Slots, 4 Hard Drives, 6 PCI Slots, and 2 Hot Plug Power Supplies

Nominal Input Voltage Nominal Input Voltage Nominal Input Voltage Nominal Input Voltage (Vrms) 100100100100 115115115115 208208208208 220220220220 230230230230 240240240240

Fully Loaded System Input Wattage (W) 1068 1068 1025 1025 1025 1012

Fully Loaded System Input AMPs (A rms) 11.6 9.8 5.0 4.8 4.5 4.3

Fully Loaded System Thermal (BTU-Hr) 3746 3642 3496 3496 3496 3450

Fully Loaded System VA (Volt-Amp) 1156 1124 1046 1046 1046 1032

System Leakage with all power supplies loaded (mA) .87 1.00 1.81 1.91 2.00 2.09

System Inrush Current with all power supplies loaded (A) 50 50 50 50 50 50

Power cord requirements Nema 5-15P to IEC320-C19 Option no./Spare no: 235603-001/237457-001

PDU Jumper Cord IEC320-C19 toIEC320-C20

Option no./Spare no: 295633-B21/295508-001

NOTESNOTESNOTESNOTES:

ActiveAnswers Power Calculation.Power calculator is LIVE on ActiveAnswers Web site:http://h30099.www3.hp.com/configurator/powercalcs.aspNOTE: NOTE: NOTE: NOTE: This Web site is available in English only.

To drill down to calculators:- Click on: "ProLiant Servers"- Click on the Server of interest. Example: DL580 G2- Click on: "Power Calculator" link (You may need to scroll down to see it.)


Power Specifications


http://h30099.www3.hp.com/configurator/powercalcs.asp

Software Product ServicesSoftware Product ServicesSoftware Product ServicesSoftware Product Services Standalone telephone support

Rights to new license version

Media and documentation updates

Hardware Product ServicesHardware Product ServicesHardware Product ServicesHardware Product Services Installation services

On-site maintenance (includes warranty support)

Response time upgrades during the warranty period

Post-warranty coverage

Performance consulting via statement of work

Warranty UpgradeWarranty UpgradeWarranty UpgradeWarranty UpgradeOptionsOptionsOptionsOptions

Response - Upgrade on-site response from next business day to same day 4 hours

Coverage - Extend hours of coverage from 9 hours x 5 days to 24 hours x 7 days

Duration - Select duration of coverage for a period of 1, 3, or 5 years

See http://www.hp.com/go/nas for details.NOTE: NOTE: NOTE: NOTE: This Web site is available in English only.


Service, Support, and Warranty Information


http://www.hp.com/go/nas

Tape Library and RequiredTape Library and RequiredTape Library and RequiredTape Library and RequiredHBAsHBAsHBAsHBAs

HP tape libraries can be directly connected to HP NAS 8000 and operated by the HP OpenView Storage Data Protector(Omniback II) agents or the NDMP server running on HP NAS 8000.The libraries supported are: HP Tape Libraries with Ultrium 230 and DLT 8000 tape drives. Connections can be either LVDS(SCSI) or Fibre Channel.Also supported HP ESL and MSL Tape Libraries with SDLT and Ultrium drives.The solution requires for two of either of these cards to be used for directly attaching the Tape Library or to a Tape Library onthe SAN

FC HBA – PCI-FCH HBA 2 GB W2K ALLSCSI Adapter – Ultra 3 HBA Dual Channel ALL

NDMP Fiber Channel SCSINDMP Fiber Channel SCSINDMP Fiber Channel SCSINDMP Fiber Channel SCSI

NAS 8000 1.6.0 andNAS 8000 1.6.0 andNAS 8000 1.6.0 andNAS 8000 1.6.0 and1.6.11.6.11.6.11.6.1

Tape ChangerTape ChangerTape ChangerTape Changer DLT8000DLT8000DLT8000DLT8000 LTOLTOLTOLTO SDLTSDLTSDLTSDLT

HP Tape Library 2/20HP Tape Library 2/20HP Tape Library 2/20HP Tape Library 2/20 Yes Yes Yes N/A






MSL 5000 seriesMSL 5000 seriesMSL 5000 seriesMSL 5000 series Yes Yes Yes N/A

ESL 9000 seriesESL 9000 seriesESL 9000 seriesESL 9000 series Yes N/A Yes Yes

Data Protector 5.0 Fiber Channel SCSIData Protector 5.0 Fiber Channel SCSIData Protector 5.0 Fiber Channel SCSIData Protector 5.0 Fiber Channel SCSI

NAS 8000 1.6.0 andNAS 8000 1.6.0 andNAS 8000 1.6.0 andNAS 8000 1.6.0 and1.6.11.6.11.6.11.6.1

Tape ChangerTape ChangerTape ChangerTape Changer DLT8000DLT8000DLT8000DLT8000 LTOLTOLTOLTO SDLTSDLTSDLTSDLT

HP Tape Library 2/20HP Tape Library 2/20HP Tape Library 2/20HP Tape Library 2/20 NOTE 1 Yes Yes N/A






MSL 5000 seriesMSL 5000 seriesMSL 5000 seriesMSL 5000 series NOTE 2, 3 Yes Yes N/A

ESL 9000 seriesESL 9000 seriesESL 9000 seriesESL 9000 series NOTE 2, 3 N/A Yes Yes

The following restrictions exist:

The Data Protector NAS agent for the NAS 8000 can not be used to control the Pre-merger HP Tape Librarychangers when connected via FC. This includes (2/20, 4/40, 6/60, 10/180, 20/700). The Tape Library changer mustbe controlled from a NT or HPUX node (also running Data Protector), when FC connected libraries are used. DataProtector with SCSI connected 2/20, 4/40, 6/60 is the preferred configuration.

1.

When configuring the MSL/ESL with Data Protector, the add device must be used. The "auto configure" mode willnot correctly associate the tape changer with its tape devices, and the SuperDLT device type is not recognized by theNAS 8000 automatic device configure module.

2.

When the MSL/ESL bridge (E1200 firmware versions 4.03.14 and 4.03.16.) is configured with direct ( FC LOOPmode) connections to the NAS 8000 tape HBAs, the bridge should be configured in "Auto Select" mode, with "2G"link speed. Refer to the MSL configuration guides for setup of the E1200. The Switch Fabric mode is preferred, usingeither McData or Brocade switches using either a Data Protector agent or NDMP service with NetBackup orNetWorker.

3.


Options


Backup TopologiesBackup TopologiesBackup TopologiesBackup Topologies The three supported backup topologies are (1) network, (2) local SCSI or FC, or (3) SAN backup device connections.


Options


In the network configuration, the backup devices are connected to a backup server on the network not directly to the NAS8000. A dedicated backup network will keep backup data from interfering with the client network. There are several backupapplications that have been tested in this configuration. (HP OpenView Storage Data Protector, OmniBack II, VERITASBackup Exec, VERITAS NetBackup, Computer Associates ARCserve 2000, IBM Tivoli Storage Manager, Legato NetWorker)NDMP and the backup agent supports direct SCSI or FC connection of the tape devices to the NAS 8000. Tape changercontrol and tape library sharing are supported.In a SAN configuration, NDMP and the backup agent will support backup to be done on a shared tape library on the SAN.As shown below.


Options


Optional NICsOptional NICsOptional NICsOptional NICs

The following NICs are supported and have been tested.

NC3134 (138603-B21) Expandable Dual-port 10/100NC7770 (244948-B21) Single-port PCI-X gigabit copperNC7132 (153543-B21) Single-port gigabit copper upgrade for NC3134NC6770 (244949-B21) Single-port PCI-X 1000SX gigabit fiberNC6132 (338456-B23) Single-port 1000SX fiber upgrade for NC3134NC3135 (128604-B21) Dual-port 10/100 upgrade for NC3134

NIC configurationNIC configurationNIC configurationNIC configurationexamplesexamplesexamplesexamples

The NAS 8000 solution reserves two PCI slots (one of which is loaded with the NC3134 dual-port 10/100TX expandableadapter) for NICs. Below are some popular configuration examples:If you want:Two 10/100TX portsOrder no additional NICs. Dual 10/100TX ports are standard on the NAS 8000.

Two 10/100TX ports and two 10/100/1000TX portsOrder one NC7132 single-port gigabit copper upgrade for the NC3134 and one NC7770 single-port PCI-X gigabit copperadapter.

Two 10/100TX ports and two 1000SX fiber portsOrder one NC6132 single-port 1000SX fiber upgrade for the NC3134 and one NC6770 single-port PCI-X 1000SX fiberadapter.

Eight 10/1000TX portsOrder another NC3134 dual-port 10/100TX expandable adapter and two NC3135 dual-port 10/100TX upgrades.


Options


Before selecting a solution that best meets the customer's needs, understand the three orderable configurations:

Non-HA (1 node) with dedicated storage (A7414B)Non-HA (1 node) with dedicated storage (A7414B)Non-HA (1 node) with dedicated storage (A7414B)Non-HA (1 node) with dedicated storage (A7414B)HA (2 node cluster) with dedicated storage (A7415B)HA (2 node cluster) with dedicated storage (A7415B)HA (2 node cluster) with dedicated storage (A7415B)HA (2 node cluster) with dedicated storage (A7415B)NAS Connected to SAN Non-HA and HA (A7416B)NAS Connected to SAN Non-HA and HA (A7416B)NAS Connected to SAN Non-HA and HA (A7416B)NAS Connected to SAN Non-HA and HA (A7416B)

These solutions can be optionally pre-racked at the factory. Racked or unracked, the operating system is loaded and the components are factory tested andconfigured. The software will only be shipped pre-loaded into the hardware that goes thru the HP integration centers. There are currently no plans to offer aCD media kit for the NAS 8000.

The following examples are rack mounted solutions.

A7414B – Configuration 1: Non-HA Dedicated Storage with VA7110A7414B – Configuration 1: Non-HA Dedicated Storage with VA7110A7414B – Configuration 1: Non-HA Dedicated Storage with VA7110A7414B – Configuration 1: Non-HA Dedicated Storage with VA7110ItemItemItemItem MinMinMinMin MaxMaxMaxMax DescriptionDescriptionDescriptionDescription Part NumberPart NumberPart NumberPart Number

1 SSP-Non HA Direct Attached A7414B

2 1 1 HP NAS Server A7418B

The NAS SERVER A7418B, contains the following factory installed components. Quantities are per server: 2-processors, 4 - 512The NAS SERVER A7418B, contains the following factory installed components. Quantities are per server: 2-processors, 4 - 512The NAS SERVER A7418B, contains the following factory installed components. Quantities are per server: 2-processors, 4 - 512The NAS SERVER A7418B, contains the following factory installed components. Quantities are per server: 2-processors, 4 - 512(2048 total) SDRAM, 2- 36.4 GB HDD, 2-Host Adapters, 1-Dual ported 10/100 Tx NIC. The following components can be(2048 total) SDRAM, 2- 36.4 GB HDD, 2-Host Adapters, 1-Dual ported 10/100 Tx NIC. The following components can be(2048 total) SDRAM, 2- 36.4 GB HDD, 2-Host Adapters, 1-Dual ported 10/100 Tx NIC. The following components can be(2048 total) SDRAM, 2- 36.4 GB HDD, 2-Host Adapters, 1-Dual ported 10/100 Tx NIC. The following components can beordered additional to those listed above for the minimum configured A7418B and will be factory installed into the NAS SERVER.ordered additional to those listed above for the minimum configured A7418B and will be factory installed into the NAS SERVER.ordered additional to those listed above for the minimum configured A7418B and will be factory installed into the NAS SERVER.ordered additional to those listed above for the minimum configured A7418B and will be factory installed into the NAS SERVER.

Xeon Processors (Addition to the 2 processors Standard)Xeon Processors (Addition to the 2 processors Standard)Xeon Processors (Addition to the 2 processors Standard)Xeon Processors (Addition to the 2 processors Standard)

Additional Processors (Customer must order additional processors in pairs)Additional Processors (Customer must order additional processors in pairs)Additional Processors (Customer must order additional processors in pairs)Additional Processors (Customer must order additional processors in pairs)

0 2 1.9 GHz 1 MB Processor Option Kit ML 570/D 001

SDRAM Memory + memory mirroring capabilitySDRAM Memory + memory mirroring capabilitySDRAM Memory + memory mirroring capabilitySDRAM Memory + memory mirroring capability

0 1 2 GB REG PC1600 4X512 ALL (4 x 512 MB) & Hot-plug memory expansion board: 002

NIC Cards (Optional 1)NIC Cards (Optional 1)NIC Cards (Optional 1)NIC Cards (Optional 1)

NC3134 64 Dual 10/100 ALL 003

NC6770 PCIX 1000SX ALL 004

NC7770 10/100/1000T ALL 005

NIC Upgrade Module (Optional 1) or (Optional 2 if Option 004 is ordered)NIC Upgrade Module (Optional 1) or (Optional 2 if Option 004 is ordered)NIC Upgrade Module (Optional 1) or (Optional 2 if Option 004 is ordered)NIC Upgrade Module (Optional 1) or (Optional 2 if Option 004 is ordered)

NC6132 1000SX MODULE ALL 006

NC7132 1000T UPGDMOD ALL 007

NC3135 Dual 10/100 Mo ALL 008

0 2 HBAs for Tape Backup (need to order in pairs)HBAs for Tape Backup (need to order in pairs)HBAs for Tape Backup (need to order in pairs)HBAs for Tape Backup (need to order in pairs)

ULTRA 3 HBA D/CH ALL 009

PCI-FCH HBA 2 GB W2K ALL 010

3 0 1 NAS Data Path Manager (Data Path Failover & Control) A7423A

4 0 1 Network Management Integration CDNetwork Management Integration CDNetwork Management Integration CDNetwork Management Integration CD

Ent Management SPI 1 Host LTU & SW Kit (Optional 1) T1002A

5 1 1 Virtual ArrayVirtual ArrayVirtual ArrayVirtual Array

Alternate Virtual Array 7110 w/ Dual Controllers 512 MB ea. A7294AZ


Alternate Virtual Array 7110 w/ Dual Controllers 2048 MB ea A7296AZ

6 4 15 Disk Drives Mixing of Hard Disk Drives is acceptable.Disk Drives Mixing of Hard Disk Drives is acceptable.Disk Drives Mixing of Hard Disk Drives is acceptable.Disk Drives Mixing of Hard Disk Drives is acceptable.

Alternate Enterprise Class 146 GB 15K RPM FC HDD A7289A






Configuration Information


7 2 2 FCCablesFCCablesFCCablesFCCables

Alternate Fibre Optic Cable 2m LC/SC Duplex M/M C7529A

Alternate Fibre Optic Cable 16m LC/SC Duplex M/M C7530A

8 0 2 DS 2405 Disk enclosure (max 15 drives per enclosure)DS 2405 Disk enclosure (max 15 drives per enclosure)DS 2405 Disk enclosure (max 15 drives per enclosure)DS 2405 Disk enclosure (max 15 drives per enclosure) A6250AZ

9 2 45 Disk Drives for DS 2405 Mixing of Hard Disk Drives is acceptable.Disk Drives for DS 2405 Mixing of Hard Disk Drives is acceptable.Disk Drives for DS 2405 Mixing of Hard Disk Drives is acceptable.Disk Drives for DS 2405 Mixing of Hard Disk Drives is acceptable.






10 1 1 HP9000 Std Rack

Alternate HP9000 Std Rack System E25 A4900A



11 1 1 Rear Door for Std. Rack System E25 (required for E25 rack) A5211AZ

Alternate Rear Door for Std. Rack System E33 (required for E33 rack) A5212AZ


12 2 2 Modular Power Dist. Unit for std racks A5137AZ

13 0 1 HP Cable Guide E7723B

14 0 1 HP 8000 Installation Service H4780A

A7414B - Configuration 2: Non-HA Direct Attach with VA7410A7414B - Configuration 2: Non-HA Direct Attach with VA7410A7414B - Configuration 2: Non-HA Direct Attach with VA7410A7414B - Configuration 2: Non-HA Direct Attach with VA7410ItemItemItemItem MinMinMinMin MaxMaxMaxMax DescriptionDescriptionDescriptionDescription Part NumberPart NumberPart NumberPart Number



The NAS SERVER A7418B, contains the following factory installed components. Quantities are per server: 2-processors, 4 - 512The NAS SERVER A7418B, contains the following factory installed components. Quantities are per server: 2-processors, 4 - 512The NAS SERVER A7418B, contains the following factory installed components. Quantities are per server: 2-processors, 4 - 512The NAS SERVER A7418B, contains the following factory installed components. Quantities are per server: 2-processors, 4 - 512(2048 total) SDRAM,2- 36.4 GB HDD, 2-Host Adapters, 1-dual ported 10/100Tx NIC. The following components can be ordered(2048 total) SDRAM,2- 36.4 GB HDD, 2-Host Adapters, 1-dual ported 10/100Tx NIC. The following components can be ordered(2048 total) SDRAM,2- 36.4 GB HDD, 2-Host Adapters, 1-dual ported 10/100Tx NIC. The following components can be ordered(2048 total) SDRAM,2- 36.4 GB HDD, 2-Host Adapters, 1-dual ported 10/100Tx NIC. The following components can be orderedadditional to those listed above for the minimum configured A7418B and will be factory installed into the NAS SERVER.additional to those listed above for the minimum configured A7418B and will be factory installed into the NAS SERVER.additional to those listed above for the minimum configured A7418B and will be factory installed into the NAS SERVER.additional to those listed above for the minimum configured A7418B and will be factory installed into the NAS SERVER.

Additional Processors (Customer must order additional processors in pairs)Additional Processors (Customer must order additional processors in pairs)Additional Processors (Customer must order additional processors in pairs)Additional Processors (Customer must order additional processors in pairs)





NC3134 64 Dual 10/100 ALL 003


NC7770 10/100/1000T ALL 005




NC3135 Dual 10/100 Mo ALL 008

0 2 HBAs for Tape Backup (need to order in pairs)HBAs for Tape Backup (need to order in pairs)HBAs for Tape Backup (need to order in pairs)HBAs for Tape Backup (need to order in pairs)










Alternate Virtual Array 7110 w/ Dual Controllers 2048 MB ea A6268AZ

6 10 15 Disk Drives Mixing of Hard Disk Drives is acceptable.Disk Drives Mixing of Hard Disk Drives is acceptable.Disk Drives Mixing of Hard Disk Drives is acceptable.Disk Drives Mixing of Hard Disk Drives is acceptable.






7 2 2 FCCablesFCCablesFCCablesFCCables

Alternate FBR Optic Cable 2m LC/LC C7524A



8 0 6 DS 2405 Disk enclosure (max 15 drives per enclosure) A6250AZ

9 2 90 Disk Drives – Mixing of Hard Disk Drives is acceptableDisk Drives – Mixing of Hard Disk Drives is acceptableDisk Drives – Mixing of Hard Disk Drives is acceptableDisk Drives – Mixing of Hard Disk Drives is acceptable






10 1 1 HP9000 Std RackHP9000 Std RackHP9000 Std RackHP9000 Std Rack








13 0 1 HP Cable GuideHP Cable GuideHP Cable GuideHP Cable Guide E7723B

14 0 1 HP 8000 Installation ServiceHP 8000 Installation ServiceHP 8000 Installation ServiceHP 8000 Installation Service H4780A




A7415B – Configuration 1: HA dedicated storage with single VA7410 array A7415B – Configuration 1: HA dedicated storage with single VA7410 array A7415B – Configuration 1: HA dedicated storage with single VA7410 array A7415B – Configuration 1: HA dedicated storage with single VA7410 array ItemItemItemItem MinMinMinMin MaxMaxMaxMax DescriptionDescriptionDescriptionDescription Part NumberPart NumberPart NumberPart Number



The NAS SERVER A7418B, contains the following factory installed components. Quantities are per server: 2-processors, 4 - 512The NAS SERVER A7418B, contains the following factory installed components. Quantities are per server: 2-processors, 4 - 512The NAS SERVER A7418B, contains the following factory installed components. Quantities are per server: 2-processors, 4 - 512The NAS SERVER A7418B, contains the following factory installed components. Quantities are per server: 2-processors, 4 - 512(2048 total) SDRAM, 2- 36.4 GB HDD, 2-Host Adapters, 1-dual ported 10/100 Tx NIC. The following components can be(2048 total) SDRAM, 2- 36.4 GB HDD, 2-Host Adapters, 1-dual ported 10/100 Tx NIC. The following components can be(2048 total) SDRAM, 2- 36.4 GB HDD, 2-Host Adapters, 1-dual ported 10/100 Tx NIC. The following components can be(2048 total) SDRAM, 2- 36.4 GB HDD, 2-Host Adapters, 1-dual ported 10/100 Tx NIC. The following components can beordered in addition to those listed above for the minimum configured A7418B and will be factory installed into the NAS SERVER.ordered in addition to those listed above for the minimum configured A7418B and will be factory installed into the NAS SERVER.ordered in addition to those listed above for the minimum configured A7418B and will be factory installed into the NAS SERVER.ordered in addition to those listed above for the minimum configured A7418B and will be factory installed into the NAS SERVER.

Additional Processors (2 per Server) (Customer must order additional processors inAdditional Processors (2 per Server) (Customer must order additional processors inAdditional Processors (2 per Server) (Customer must order additional processors inAdditional Processors (2 per Server) (Customer must order additional processors inpairs)pairs)pairs)pairs)





NC3134 64 Dual 10/100 ALL 003


NC7770 10/100/1000T ALL 005




NC3135 Dual 10/100 Mo ALL 008

0 4 HBAs for Tape Backup (Customer must order HBAs in pairs)HBAs for Tape Backup (Customer must order HBAs in pairs)HBAs for Tape Backup (Customer must order HBAs in pairs)HBAs for Tape Backup (Customer must order HBAs in pairs)









High Availability ComponentsHigh Availability ComponentsHigh Availability ComponentsHigh Availability Components

5 1 1 Quorum Server A7421C

6 2 2 MC/ServiceGuard for NAS 8000 LTU T1501AA

7 1 1 CAT 5 Network Cable (Cross-Over – Heartbeat between the two servers) C7539A


Alternate Virtual Array 7410 with Dual Controllers 1024 MB ea. A6267AZ


9 10 15 Disk Drives *Mixing HDD accepted






10 2 2 Cables











13 1 1 HP9000 Std RackHP9000 Std RackHP9000 Std RackHP9000 Std Rack













A7415B – Configuration 2: HA dedicated storage with dual VA7410 arraysA7415B – Configuration 2: HA dedicated storage with dual VA7410 arraysA7415B – Configuration 2: HA dedicated storage with dual VA7410 arraysA7415B – Configuration 2: HA dedicated storage with dual VA7410 arraysItemItemItemItem MinMinMinMin MaxMaxMaxMax DescriptionDescriptionDescriptionDescription Part NumberPart NumberPart NumberPart Number



The NAS SERVER A7418B, contains the following factory installed components. Quantities are per server: 2-processors, 4 - 512The NAS SERVER A7418B, contains the following factory installed components. Quantities are per server: 2-processors, 4 - 512The NAS SERVER A7418B, contains the following factory installed components. Quantities are per server: 2-processors, 4 - 512The NAS SERVER A7418B, contains the following factory installed components. Quantities are per server: 2-processors, 4 - 512(2048 total) SDRAM, 2- 36.4 GB HDD, 2-Host Adapters, 1-dual ported 10/100Tx NIC. The following components can be ordered(2048 total) SDRAM, 2- 36.4 GB HDD, 2-Host Adapters, 1-dual ported 10/100Tx NIC. The following components can be ordered(2048 total) SDRAM, 2- 36.4 GB HDD, 2-Host Adapters, 1-dual ported 10/100Tx NIC. The following components can be ordered(2048 total) SDRAM, 2- 36.4 GB HDD, 2-Host Adapters, 1-dual ported 10/100Tx NIC. The following components can be orderedadditional to those listed above for the minimum configured A7418B and will be factory installed into the NAS SERVER.additional to those listed above for the minimum configured A7418B and will be factory installed into the NAS SERVER.additional to those listed above for the minimum configured A7418B and will be factory installed into the NAS SERVER.additional to those listed above for the minimum configured A7418B and will be factory installed into the NAS SERVER.




0 2 2 GB REG PC1600 4X512 ALL (4 x 512 MB) & Hot plug memory expansion board: 002


NC3134 64 Dual 10/100 ALL 003


NC7770 10/100/1000T ALL 005




NC3135 Dual 10/100 Mo ALL 008























10 8 8 CablesCablesCablesCables











13 2 2 2 Gb Switch2 Gb Switch2 Gb Switch2 Gb Switch

Alternate 2 Gb 8-port FC Switch A7346AZ

HP Advanced Zoning License (Required -1 per 8-port switch A7346AZ) A7354A

Alternate 2 Gb 16-port FC Switch A7340AZ

14 8 8 Short-Wave SFP Transciever (Required 4 per switch) A6515A

15 1 1 HP9000 Std Rack SystemHP9000 Std Rack SystemHP9000 Std Rack SystemHP9000 Std Rack System








18 0 1 HP Cable GuideHP Cable GuideHP Cable GuideHP Cable Guide E7723B

19 0 1 HP 8000 Installation ServiceHP 8000 Installation ServiceHP 8000 Installation ServiceHP 8000 Installation Service H4780A




A7416B - Configuration 1: Non-HA SAN solutionA7416B - Configuration 1: Non-HA SAN solutionA7416B - Configuration 1: Non-HA SAN solutionA7416B - Configuration 1: Non-HA SAN solutionItemItemItemItem MinMinMinMin MaxMaxMaxMax DescriptionDescriptionDescriptionDescription Part NumberPart NumberPart NumberPart Number

1 SSP-Non HA SAN A7416B


The NAS SERVER A7418B, contains the following factory installed components. Quantities are per server: 2-processors, 4 - 512The NAS SERVER A7418B, contains the following factory installed components. Quantities are per server: 2-processors, 4 - 512The NAS SERVER A7418B, contains the following factory installed components. Quantities are per server: 2-processors, 4 - 512The NAS SERVER A7418B, contains the following factory installed components. Quantities are per server: 2-processors, 4 - 512(2048 total) SDRAM, 2- 36.4 GB HDD, 2-Host Adapters, 1-Dual ported 10/100Tx NIC. The following components can be ordered(2048 total) SDRAM, 2- 36.4 GB HDD, 2-Host Adapters, 1-Dual ported 10/100Tx NIC. The following components can be ordered(2048 total) SDRAM, 2- 36.4 GB HDD, 2-Host Adapters, 1-Dual ported 10/100Tx NIC. The following components can be ordered(2048 total) SDRAM, 2- 36.4 GB HDD, 2-Host Adapters, 1-Dual ported 10/100Tx NIC. The following components can be orderedadditional to those listed above for the minimum configured A7418B and will be factory installed into the NAS SERVERadditional to those listed above for the minimum configured A7418B and will be factory installed into the NAS SERVERadditional to those listed above for the minimum configured A7418B and will be factory installed into the NAS SERVERadditional to those listed above for the minimum configured A7418B and will be factory installed into the NAS SERVER






NC3134 64 Dual 10/100 ALL 003


NC7770 10/100/1000T ALL 005




NC3135 Dual 10/100 Mo ALL 008







5 1 1 HP9000 Std Rack













A7416B – Configuration 2: HA SAN solutionA7416B – Configuration 2: HA SAN solutionA7416B – Configuration 2: HA SAN solutionA7416B – Configuration 2: HA SAN solutionItemItemItemItem MinMinMinMin MaxMaxMaxMax DescriptionDescriptionDescriptionDescription Part NumberPart NumberPart NumberPart Number

1 SSP-HA dedicated storage A7416B


The NAS SERVER A7418B, contains the following factory installed components. Quantities are per server: 2-processors, 4 - 512The NAS SERVER A7418B, contains the following factory installed components. Quantities are per server: 2-processors, 4 - 512The NAS SERVER A7418B, contains the following factory installed components. Quantities are per server: 2-processors, 4 - 512The NAS SERVER A7418B, contains the following factory installed components. Quantities are per server: 2-processors, 4 - 512(2048 total) SDRAM, 2- 36.4 GB HDD, 2-Host Adapters, 1-dual ported 10/100Tx NIC. The following components can be ordered(2048 total) SDRAM, 2- 36.4 GB HDD, 2-Host Adapters, 1-dual ported 10/100Tx NIC. The following components can be ordered(2048 total) SDRAM, 2- 36.4 GB HDD, 2-Host Adapters, 1-dual ported 10/100Tx NIC. The following components can be ordered(2048 total) SDRAM, 2- 36.4 GB HDD, 2-Host Adapters, 1-dual ported 10/100Tx NIC. The following components can be orderedadditional to those listed above for the minimum configured A7418B and will be factory installed into the NAS SERVER.additional to those listed above for the minimum configured A7418B and will be factory installed into the NAS SERVER.additional to those listed above for the minimum configured A7418B and will be factory installed into the NAS SERVER.additional to those listed above for the minimum configured A7418B and will be factory installed into the NAS SERVER.






NC3134 64 Dual 10/100 ALL 003


NC7770 10/100/1000T ALL 005




NC3135 Dual 10/100 Mo ALL 008

0 4 HBAs for Tape Backup (need to order in pairs per server)HBAs for Tape Backup (need to order in pairs per server)HBAs for Tape Backup (need to order in pairs per server)HBAs for Tape Backup (need to order in pairs per server)



3 2 2 NAS Data Path Manager (Data Path Failover & Control)NAS Data Path Manager (Data Path Failover & Control)NAS Data Path Manager (Data Path Failover & Control)NAS Data Path Manager (Data Path Failover & Control) A7423A

4 0 1 Network Management Integration CD






A7398B - NAS 8000 Dedicated Storage ServerA7398B - NAS 8000 Dedicated Storage ServerA7398B - NAS 8000 Dedicated Storage ServerA7398B - NAS 8000 Dedicated Storage ServerItemItemItemItem QuantityQuantityQuantityQuantity DescriptionDescriptionDescriptionDescription Part NumberPart NumberPart NumberPart Number

1 NAS 8000 Dedicated Storage ServerNAS 8000 Dedicated Storage ServerNAS 8000 Dedicated Storage ServerNAS 8000 Dedicated Storage Server A7398B

4 Xeon MP X1900-1MB Processors

4 512 (2048 total) SDRAM

2 36.4 GB HDD

2 HBA adapters

NIC CardsNIC CardsNIC CardsNIC Cards

1 NC3134 Expandable Dual-port 10/100Tx

1 NC7770 PCI-X Gigabit Server Adapter

1 NC7132 10/100/1000-T Upgrade Module for NC3134




A7399B - NAS 8000 SAN Server A7399B - NAS 8000 SAN Server A7399B - NAS 8000 SAN Server A7399B - NAS 8000 SAN Server ItemItemItemItem QuantityQuantityQuantityQuantity DescriptionDescriptionDescriptionDescription Part NumberPart NumberPart NumberPart Number

1 NAS 8000 SAN ServerNAS 8000 SAN ServerNAS 8000 SAN ServerNAS 8000 SAN Server A7399B

4 Xeon MP X1900-1MB Processors

4 512 (2048 total) SDRAM

2 36.4 GB HDD

2 HBA adapters

NIC CardsNIC CardsNIC CardsNIC Cards

1 NC3134 Expandable Dual-port 10/100Tx

1 NC7770 PCI-X Gigabit Server Adapter

1 NC7132 10/100/1000-T Upgrade Module for NC3134

© Copyright 2003 Hewlett-Packard Development Company, L.P.

The information contained herein is subject to change without notice.

Microsoft and Windows are US registered trademarks of Microsoft Corporation. Intel and Xeon are trademarks of the Intel Corporation in the US and othercountires. Unix is a registered trademark of The Open Group.

The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing hereinshould be construed as constituting an additional warranty. HP shall not be liable for technical or editorial errors or omissions contained herein.




QuickSpecs HP StorageWorks NAS 8000

Documents

Transcript of QuickSpecs HP StorageWorks NAS 8000