QuickNet Copper Cabling Systems - پندوييت - Panduitnit.ir/userfiles/file/Panduit/QuickNet...
Transcript of QuickNet Copper Cabling Systems - پندوييت - Panduitnit.ir/userfiles/file/Panduit/QuickNet...
Quick Deployment for High-Density
Data Centre Applications
QuickNet™ Copper Cabling Systems
visit www.panduit.com/UPI2
Benefits of a Pre-Terminated Cabling SystemYour network drives the critical data, voice, video, and security applications required
to support your business. A pre-terminated cabling system simplifies the delivery
of those network services by providing reliable infrastructure components assembled
and tested in a factory-controlled environment.
An end-to-end pre-terminated cabling system is an ideal solution for data centres
especially when time for traditional cable installation, termination, and testing is
limited. Pre-terminated cable assemblies offer a simple plug-n-go solution for links
between LAN switches, servers, patch panels and zone distribution areas, for new
installations or to enable easy additions to current infrastructure.
Panduit’s Unified PhysicalInfrastructure (UPI)
A unified approach to physical and logicalsystems architecture is imperative for solutions to fully address the need for availability, agility, integration, and security.
Panduit has developed the industry’s most comprehensive and holistic approach to a Unified Physical Infrastructure and canhelp enterprises align, converge and optimise critical systems – communication,computing, control, power and security – tobuild a smarter, unified business foundation.
Advantages of the Panduit QuickNet ™
Copper Cabling SystemAs part of the complete QuickNet™ Solution, the Panduit™ QuickNet™ Copper
Cabling System is a custom pre-terminated cabling solution, designed to meet unique
structured cabling requirements. Fast and simple to install, this high-density solution
provides consistent network reliability and reduces initial on-site rework. This
leading-edge system delivers ensured performance for the lowest total cost
of ownership.
Quick Network DeploymentPre-terminated cabling systems can be installed in 75% less time than field-termination
methods, eliminating the need for on-site bundling, terminating and testing. Moves,
adds and changes can be made immediately by existing on-site network professionals,
increasing productivity relative to traditional field installations. This is critical for areas
that require high security and limited access, as changes to the network can be made
without scheduling outside personnel.
Mitigates Risks – Quality, Reliability,Performance and SecurityThe QuickNet™ Cabling System mitigates risk in the areas of the quality, reliability
and performance of the installed system, as well as site security during installation.
Quality and reliability of the installed system are ensured through the use of authentic
Panduit components that are assembled and tested in Panduit’s factory-controlled
environment, and performance is ensured by the 100% testing of each finished
assembly. Site security risks are minimised due to the significantly reduced
installation time, which means fewer installers and less time spent by
them on-site.
Provides a Re-Deployable AssetEach QuickNet™ assembly is labelled with length and unique serial number
information so it can be easily catalogued and tracked as a network asset, and as
such, can quickly and easily be redeployed to address changing network needs.
3
Why Specify Panduit ™
QuickNet™ Copper Cabling System?
• Quick Deployment
75% Faster
• Ease of Installation Plug-n-Go Solution
• Improved Reliability
100% Factory Performance Tested
• Unified Copper and Fibre Solution
Copper and Fibre in the Same Patch Panels
• High Performing Cabling System Category 6A and Category 6, UTP and Shielded
• Standard Lengths Stocked
Immediate Availability
• Custom Assemblies Available For Unique Requirements
• “Green” Solution80% Less Packaging Waste
visit www.panduit.com/quicknet
visit www.panduit.com/quicknet4
Integrated release tab enables easy installation and removal of 6-port pre-terminated cassette.
Shielded cassettes provideseamless self bonding forshielded cable assemblies.
A Foundation of Excellence
Innovative DesignThe Panduit™ QuickNet™ Copper Cabling System incorporates innovativedesign features.
• Built-in release mechanism on QuickNet™ Pre-Terminated Cassettes enablessimple installation and removal with one hand
• 48-port (1 RU) high-density angled patch panels and PatchRunner™
Vertical Cable Managers quadruple rack density for reduced real estate costs
• QuickNet™ Adapter snaps in and out of QuickNet™ Patch Panels and accepts all Mini-Com® Modules to provide flexibility and scalability for changing network requirements
• QuickNet™ Plug Pack Assemblies facilitate quick and easy connection and disconnection of cables to a variety of switches, reducing time and costassociated when installing and maintaining structured cabling links
• Staggered cable lengths ensure proper bend radius control and an aesthetic solution
• Jack modules, cable and patch cords are tuned to each other to deliver maximum channel performance and network reliability
World-Class QualityQuickNet™ Copper Cabling System components are manufactured to strictISO quality procedures.
• QuickNet™ Cable Assemblies are 100% performance tested to TIA or ISO electricalpermanent link specifications (test report shipped with each assembly)
• Each assembly has a unique serial number for future traceability
• Giga-TX™ Jack Modules undergo more than 90 additional quality checks for assured performance
World-Class Service and SupportAt Panduit, we respond quickly to customer needs and deliver exceptional service levels globally.
• Global sales and technical support teams work together to ensure the optimum solution is provided to meet your requirements
• Short lead times and custom configurations keep your project on schedule
• Design tools facilitate customisation and allow flexibility when designingthe structured cabling infrastructure
5visit www.panduit.com/quicknet
QuickNet™ Plug Packs allow multiple cables to be installed simultaneously with one hand for speed of deployment in switch applications.
24-port, flat modular patch panel, populated with pre-terminated shielded cassettes with
shielded jack modules
48-port, angled modular patch panel,populated with pre-terminated cassettes
with UTP jack modules
Patch panel adapter, populated withcopper, fibre and audio video modules
Patch panel blank
Elements of the System
QuickNet™ Cable Assemblies• Offer UTP Category 6 Cabling and UTP/STP Category 6A Cabling
• Pre-bundled with six cables for easy installation
• Available in lengths from 3 metre to 90 metres (half metre increments) and different cable colours for redundant path applications
• Multiple termination types including pre-terminated cassettes, jack modules,modular plugs, plug packs and/or unterminated options
• Shielded die cast cassette utilises direct bonding, eliminating external bonding requirement
QuickNet™ Angled and Flat Patch Panels• Accept Quicknet™ Pre-Terminated Cassettes, which snap in and out with one hand
for quick installation
• Available in 24-port (1 RU) standard density and 48-port (1 RU)high-density configurations
• Angled design allows cable to flow to each side of the rack and eliminates the need for horizontal cable managers by enabling patch cords to be routed directly into vertical cable managers
• Proper identification of each port with pre-printed numbers above each port; vertical numbering from top to bottom of panel is also available for high density switch applications
QuickNet™ Patch Panel Accessories• Patch panel adapter accepts Mini-Com® Modules for UTP, fibre optic
and audio/video applications
• Blank patch panel adapter reserves space for future use while promotingproper airflow and cooling
• Adapters and blanks easily snap in and out of QuickNet™ Patch Panels
Data Centre Applications
QuickNet™ Jack-to-Plug Cable Assemblies
are ideal for cross-connect applications
QuickNet™ Copper and Fibre Cabling Systems are
compatible with PanZone ™ Enclosures and Boxes
for zone cabling applications
The QuickNet™ Copper Cabling System is
integrated with the Panduit ™ StructuredGround™
System to optimise network performance
For the full Panduit product offering, request PanduitPan-Net Network Solutions Catalog: SA-NCCB51.
6 visit www.panduit.com/quicknet
QuickNet™ Plug Pack termination option
minimises network downtime during switch
installation and maintenance
QuickNet™ Cassettes snap in and out of QuickNet™
Patch Panels allowing easy access for moves,
adds and changes in switch or server applications
Bundled QuickNet™ Cable Assemblies
are easily routed in Wyr-Grid™ Overhead
Cable Tray Routing System,
FiberRunner ™ Cable Routing System
or GridRunner™ Underfloor Cabling
Routing System
QuickNet™ Cassettes snap in and out of QuickNet™
Patch Panels allowing quick and reliable installation in server applications
7visit www.panduit.com/quicknet
A Commitment to GreenAs a global manufacturer, Panduit has embraced lean and sustainable thinking as a core value by designing solutions and facilities that are good for the environment and for business. The QuickNet™ Copper Cabling System supports this commitmentby significantly reducing the amount of product packaging waste as compared to traditional field-termination installations, and by providing cabling assemblies which are inherently redeployable and reusable.
8 visit www.panduit.com/quicknet
Environmental Benefits of the QuickNet™ CopperCabling System
QuickNet™ installations
are more “Green” than
traditional installations:
• 80% Less Packaging Waste
• No Termination Scrap Material or Debris to Clean Up
• QuickNet™ Assemblies are Reusable
Typical Waste from
Traditional Installation vs. QuickNet™ Installation
(Based on 600 Link Installation)
Traditional Installation
QuickNet™ Installation
*FLUKE is a registered trademark of Fluke Corporation. 9visit www.panduit.com/quicknet
Permanent Link PerformanceThe Panduit™ QuickNet™ Copper Cabling System exceeds the applicable permanent link
requirements for Category 6A and Category 6 transmission over twisted-pair cabling.
Each assembly is 100% performance tested at the factory. A Fluke* Linkware test report
accompanies each cable assembly and will also be archived by Panduit. Because the
cable assemblies are 100% factory tested, the time and cost associated with on-site
field testing are eliminated. The QuickNet™ Copper Cabling System provides risk
mitigation and guaranteed performance by providing cable assemblies with a factory
product warranty.
Permanent Link Compliance is tested for the following parameters:
• Insertion Loss (IL)
• Return Loss (RL)
• Near-End Crosstalk (NEXT)
• Power Sum Near-End Crosstalk (PSNEXT)
• Equal Level Far-End Crosstalk (ELFEXT)
• Power Sum Equal Level Far-End Crosstalk (PSELFEXT)
QuickNet™ Cable Assembly Ordering Information for Europe, Middle East and Africa
10 visit www.panduit.com/quicknet
1 – Q = QuickNet™
2 – Performance LevelA = Category 6A UTP (TX6A™ 10Gig™) C = Category 6 UTPH = Category 6A S/FTP (TX6A™ 10Gig™)L = Category 6 F/UTP (TX6000™)T = Category 6A U/FTP (TX6A™ 10Gig™)U = Category 6A S/FTP Stranded (TX6A™ 10Gig™)*X = Category 6A (TX6A-SD™ 10Gig™) UTP MaTriX*Z = Category 6A (TX6A™ 10Gig™) UTP MaTriX
3 – Flame/Smoke RatingL = LSZH
4 – Cable ColourX = Market Colour Cable
5 – Termination End 1C = Cassette J = Jack modulesP = Modular plugsK = Jack modules staggered rightL = Jack modules staggered leftQ = Modular plugs staggered rightS = Modular plugs staggered left
6 – Termination End 1 Colour OptionsJack Module Colour OptionsA = Arctic White, B = Blue, E = Electric Ivory, G = Green, H = Off White, I = International Grey, L = Black, O = Orange, R = Red, V = Violet, W = White, Y = Yellow Shielded Jack Modules, chose option L (all shielded jack modules are Black)Modular Plug and Unterminated Colour OptionsX = No colour option available, all modular plugs are clear
7 – Termination End 2A = Plug Pack (6-pack)R = Recessed Plug Pack (6-pack)C = Cassette J = Jack modulesP = Modular plugsK = Jack modules staggered rightL = Jack modules staggered leftQ = Modular plugs staggered rightS = Modular plugs staggered leftU = UnterminatedO = Unterminated with cassette and jack modules for on-site termination
8 – Termination End 2 Colour OptionsJack Module Colour OptionsA = Arctic White, B = Blue, E = Electric Ivory, G = Green, H = Off White, I = International Grey, L = Black, O = Orange, R = Red, V = Violet, W = White, Y = Yellow Shielded Jack Modules, chose option L (all shielded jack modules are Black)Plug Pack Colour OptionsB = Blue, W = White, R = Red, L = BlackRecessed Plug Pack Colour OptionsS = SilverModular Plug and Unterminated Colour OptionsX = No colour option available, all modular plugs are clear
9 – Assembly OptionsP = Pulling eyeX = No assembly options requested
10 – Custom Labelling*L = Custom assembly labelC = Custom cable labelsB = Custom assembly and cable labelsX = No custom labels requested
11 – Assembly Length**3 to 90 Metres
12 – M = Metre Length13 – Additional Length
0 = No additional length5 = 0.5 additional length
14 – Bundle OptionLeave blank for standard Kevlar threadE = Expandable sleevingG = 5m sleeve on each end
Q Z L X C L C L X X 3 M 5 E
1 2 3 4 5 6 7 8 9 10 11 12 13 14
Example:
*Custom cable assembly labels are available up to eighteen characters; individual cable labels are available up to fifteen characters.**For cable assemblies constructed of Category 6A (TX6A-SD™ 10Gig™) UTP MaTriX Copper Cable or Category 6A S/FTP Stranded (TX6A™) 10Gig™ Copper Cable, themaximum assembly length is 60m.All connectivity is wired T568B. Permanent link test results shipped with each cable assembly. Market cable colour is White for all above cable options with the exception of U (Category 6, stranded, TX6A™ 10Gig™), which is International Grey.
Example – The above part number is a 3.5 metre QuickNet™ Cable Assembly constructed of LSZH, White, TX6A™ 10Gig™ UTP Copper Cable, bundled with expandable sleeving, with pre-terminated cassettes that contain Black TX6A™ 10Gig™ UTP Jack Modules on each end.
Loomed CableQuality Assurance Label Tak-TyHook & Loop Strips
QuickNet™
Pre-Terminated Cassette
UTP Cassette
Shielded Cassette
UTP Jack Modules
UTP Modular Plugs
Un-Terminated
6-Port Plug Pack
Termination Options
QuickNet™ Patch Panels, Accessories, and Patch Cords
11
*Represents multiple metre lengths and multiple colours.Contact customer service for additional information.
visit www.panduit.com/quicknet
QAPP48HDBL
QPPABL
QPPBBL
SRB19BLY
QPPN6BU
QPPLD6-X
^One rack space = 44.45mm.++Available in BU (Blue), BL (Black), RD (Red), or WH (White).Recessed version, part number QPPR6S, is silver.
QPP48HDBL
Part Number Part Description
Patch CordsUTP6A*M Category 6A UTP CM patch cord with TX6™ PLUS Modular Plugs on each end.
UTP6ASD*M Category 6A-SD UTP CM patch cord with TX6™ PLUS Modular Plugs on each end.
STP6X*M Category 6A shielded LSZH/CM patch cord with TX6™ PLUS Shielded Modular Plugs on each end.
UTPSP*MY Category 6 UTP CM patch cord with TX6™ PLUS Modular Plugs on each end.
Part Number Description
No. ofRack
Spaces^
Std.Pkg.Qty.
Std.Ctn.Qty.
QuickNet ™ Angled Patch PanelsQAPP24BL 24-port, angled patch panel. 1 1 10
QASP24BL 24-port, all metal angled patch panel which accepts QuickNet™
Pre-Terminated Shielded Cassettes and Patch Panel Adapters.1 1 10
QAPP48HDBL 48-port, high-density angled patch panel. 1 1 10
QAPP48HDVNSBL 48-port, high-density angled patch panel with pre-printed verticalnumbering on each port for switch applications.
1 1 10
QASP48HDBL 48-port, all metal angled patch panel which accepts QuickNet™
Pre-Terminated Shielded Cassettes and Patch Panel Adapters.1 1 10
QuickNet ™ Flat Patch PanelsQPP24BL 24-port, flat patch panel. 1 1 10
QSP24BL 24-port, all metal patch panel which accepts QuickNet™
Pre-Terminated Shielded Cassettes and Patch Panel Adapters.1 1 10
QPP48HDBL 48-port, high-density flat patch panel. 1 1 10
QPP48HDVNSBL 48-port, high density flat patch panel with pre-printed verticalnumbering on each port for switch applications.
1 1 10
QSP48HDBL 48-port, all metal patch panel which accepts QuickNet™
Pre-Terminated Shielded Cassettes and Patch Panel Adapters.1 1 10
Patch Panel AdapterQPPABL 6-port, patch panel adapter accepts Mini-Com™ UTP, fiber optic
and audio/video modules.— 1 10
Patch Panel BlankQPPBBL Reserves space for future use and promotes proper airflow
and cooling.— 1 10
Strain Relief BarSRB19BLY Cable strain relief bar extends 50mm off of the rack to support cables
in patch panels.— 1 10
Label KitQPPLC24 Label/label cover kit for 24-port QuickNet™ Patch Panels. Each kit
contains four labels and four clear label covers per bag.— 1 10
Plug PacksQPPN6++ QuickNet™ Plug Pack accepts six RJ45 modular plugs. — 1 10QPPN8++ QuickNet™ Plug Pack accepts eight RJ45 modular plugs. — 1 10QPPNR6S QuickNet™ Recessed Plug Pack accepts six RJ45 modular plugs. — 1 10
Plug Pack AccessoriesQPPRT Removal tool allows individual cables to be removed from plug pack
without disruption of other network connections.— 1 10
QPPLD6-X Lock-in device prevents unauthorised removal of cables from theplug pack.
— 10 100
Real-World SolutionsWith a proven reputation for excellence and innovation, Panduit and our partners
work with you to overcome challenges and implement real-world solutions that
create a competitive business advantage. Panduit offers the broadest range of
solutions, from data centers and intelligent buildings to manufacturing operations,
to help you build a smarter, unified business foundation.
Technology Leadership
Panduit develops innovative physical infrastructure solutions that meet the
rapidly changing needs of our clients, from hardware and software to advisory
services. This commitment is supported by investment in advanced research,
solutions-focused product development, world-class manufacturing, and
collaboration with customers at the forefront of technology.
Partner Ecosystem
Our best-in-class partner ecosystem offers a comprehensive portfolio of services
that span the project lifecycle, from planning and design to delivery, deployment,
maintenance, and operation. Panduit business partners – distributors, and certified
architects, consultants, engineers, designers, system integrators, and contractors –
are qualified to help you achieve your objectives and realize predictable and
measurable results.
Strategic Alliances
Panduit cultivates long-term strategic alliances with industry leaders, including
Cisco Systems, EMC, IBM, and Rockwell Automation, to develop, optimize, and
validate solutions for our customers. This investment in people and resources
helps solve our customers’ greatest business challenges.
Global Business Commitment
Panduit is committed to delivering a consistently high level of quality and service
the world over. With a presence in more than 100 countries, local Panduit sales
representatives and technical specialists offer guidance and support that bring
value to your business. Our global supply chain, which includes manufacturing,
customer service, logistics, and distribution partners, provides prompt response
to your inquiries and streamlines delivery to any worldwide destination.
Sustainability
With a commitment to environmental sustainability, Panduit develops and
implements solutions that protect, replenish, and restore the world in which
we live. This commitment is demonstrated by Panduit’s LEED Gold certified
World Headquarters, leveraging the Unified Physical InfrastructureSM approach
to enable convergence of critical building systems to drive energy efficiency
and ongoing operational improvement.
© 2012 Panduit Corp. ALL RIGHTS RESERVED. Printed in the EU. SA-COCB26-UK Replaces COCB14-GB 1/2012
Harness the power of
your Enterprise Network
Call or visit us online,
we can show you how.
Panduit Corp.
World Headquarters
Tinley Park, IL 60487
US and Canada: 800.777.3300
Europe, Middle East, and Africa:
+44.20.8601.7200
Latin America: 52.33.3777.6000
Asia Pacific: 65.6305.7575
www.panduit.com