QUENCHING & DEFORMATION DILATOMETER › wp-content › uploads › 2018 › 06 › ...3 Technical...
Transcript of QUENCHING & DEFORMATION DILATOMETER › wp-content › uploads › 2018 › 06 › ...3 Technical...
-
QUENCHING &DEFORMATION DILATOMETER
-
2
The Quenching and Deformation Dilatometer L78 RITA is especially sui-
table for the determination of deformation paramenter and of TTT, CHT
and CCT diagrams. The special induction furnace allows heating and
cooling at controlled speeds in excess of 400°C/s. The system complies
with ASTM A1033.
All critical parameters such as heat up and cool down speed, gas control
and safety features are software controlled. The professional software
LINSEIS TA-WIN operates exclusively under the Microsoft© operation
system. All routine (creation of CHT/CCT/TTT diagrams) and demanding
applications are solved by the unique Software package that comes
with the instrument.
Export functions in ASCII-format as well as graphic output are available.
The used linerar actuator machanical system makes it possible to
achieve deformation rates from 0.001 up to 200 mm/s in single or mul-
tiple hits.
Quenching & Deformation Dilatometer
System configurations
Quenching Dilatometer
Quenching
CTE option
Cryogenic option (temperature range: –170°C)
DSC option (up to 1450°C)
Deformation mode
Laser displacement sensor option
Tension mode
Laser displacement sensor option
-
3
Technical specifications
Turbo Molecular Pump
L 78 RITA/Q Quenching Dilatometer L 78 RITA/Q/D Deformation Dilatometer
Temperature range -100 up to 1600°C -100 up to 1600°C
Sample geometry solid and hollow samples solid samples
Sample diameter approx. 4 mm approx. 5 mm
Sample length approx. 10 mm approx. 10 mm
Heating rates 4500°C/s 2500°C/s
Cooling rates 3000°C/s 500°C/s
Defromation force 25 kN
Deformation rate 0.001 up to 200 mm/s
Minimum pause between two deformation steps
60 ms
Machanical control modes stroke, force, stress, strain (optional)
up to 2500°C/s
TTT, CHT, CCT
Technical specifications
Tension adapter (compression—tension)
Tensile- and compression force max. 25 kN Heating- and cooling rate max. 100 Ks–1
Deformation rate max. 20 mms–1 Typical sample geometry d = 5 mm; l = 10 mm
Deformation way max. ±5 mm
-
4
Software
Features -Software
In respect to thermal and mechanical sample treatment numerous dif-
ferent matematical functions can be selected.
• User-friendly
• Multi-methods analysis (DSC TG, TMA, DIL, etc.)
• Zoom function
• Online help menu
• Report generator
• Data export to MS Excel
• Export and import of data ASCII
• Program capable of text editing
• Data security in case of power failure
• Thermocouple break protection
• Repetition measurements with minimum parameter input
• Evaluation of current measurement
• Curve comparison up to 32 curves
• Storage and export of evaluations
• Programmable gas control
• Statistical evaluation package
• Smoothing of total or partial measurement
• Tangent intersection determination (automatic or manual)
• Free scaling
The information of a thermo analytical measurement can be increased
when using the broad range of specialized Software.
Software options
• Specific Heat determination (Cp)
• Rate Controlled Sintering (RCS)
• Calculated-DTA
• Quenching Dilatometer Software
• CHT / CCT / TTT Diagrams
• Thermo Kinetics Software
-
5
7.0
6.5
6.0
5.5
5.0
4.5
4.0
3.5
3.0
2.5
2.0
1.5
1.0
0.5
0
Forc
e [k
N]
0 30 60 90 120 150 180 210 240 270 300 330 360 390
Tem
pera
ture
[°C]
1200
1100
1000
900
800
700
600
500
400
300
200
100
0
Time [s]
80
70
60
50
40
30
20
10
0
Dila
tion
[µm
]
0 50 100 150 200 250 300 350 400 450 500Temperature [°C]
Heating
Cooling
Picture © Dr. Sommer Werkstofftechnik GmbH, Issum
Applications
Static phase transformation without deformation
Dynamic phase transformation two thermomechanical deformations
-
LINSEIS GmbHVielitzerstr. 43
95100 SelbGermany
Tel.: (+49) 9287–880 - 0Fax: (+49) 9287–70488E-mail: [email protected]
LINSEIS Inc.109 North Gold DriveRobbinsville, NJ 08691USATel.: (+1) 609 223 2070Fax: (+1) 609 223 2074E-mail: [email protected]
www.linseis.com
Products: DIL, TG, STA, DSC, HDSC, DTA, TMA, MS/FTIR, In-Situ EGA, Laser Flash, Seebeck Effect Services: Service Lab, Calibration Service