representing Quaser Multi Axis Vertical Machining Centers

YMT (Brea, CA) is the importer of Quaser

multi axis vertical machining centers.

YMT’s parts room (Brea, CA) is stocked with parts and

accessories for Quaser machining centers.

Most parts can arrived next day if needed.

VMC Technologies is theexclusive Michigan sales representative for Quaser machining centers.

VMC Technologies service dept. provides local service in Michigan for Quaser machining centers.

Types: Multi Axis Machining Centers

Uses four simultaneous machining axes and the +1 one is used for for positioning. This allows for up to five sides of a part to be machined in a a single set up.

4 + 1 The ability of a machining center to move a tool simultaneously on five different axes. The axes include X, Y, Z and two auxiliary style table

5 Axes

Advantages: Multi Axis Machining Centers

Machine Complex PartsMulti-axis machining makes it possible machine parts that otherwise have to be casted which required expensive tooling.

Reduce Set Up TimeParts can be machined in only one fixture which saves time but also reduces operator error & tooling cost.

Less CompetitionSince not many shops have multi axis capabilities, there’s less competition which means you can charge more resulting in increased profits.

Multi Axis Machining Samples

medical

impeller

tire mold

turbine blades

VALUE – HIGH PRECISION – QUALITY – EASE of USE - DESIGN

#5 Reasons to consider Quaser multi axis machining centers?

#1.VALUE: Quaser multi axis machining centers were

originally developed for the Europe market where they compete with high end German machines. Theyare very closely matched or better than the German made units, but at a lower price.

#2.HIGH PRECISION: Quaser machines provide top notch

repeatable precision and accuracy. A lot of builders makes "muscle machines" with ridiculous specs but lose the ability to maintain needed accuracy. This maybe good for some markets

where they only need rough machining.

Quaser is aimed at the high precisionmarkets such as aerospace and medical.They are trying to build machines thatare in the "Zen" balance between

performance and precision.

#3.QUALITY: Quaser spends most of its revenue on R&D techniques like advanced CAD & Finite Analysis simulation software. All machines machines are built in-house are subject to pass the toughest inspection list and 48 hours continuous burn-in test before they are ready to ship out.

#4.EASE of USE: We often get the remarks "This is the easiest machine I ever operated.”

#5.DESIGN: Quaser rigid

cast designs are hand scrapped

and can withstand any

machining environment.

4 + 1 Machining CentersRequest Info.

model MF400 MF500 MF630X,Y,Z axis travel 16.1" x 24" x 20" 21.7" x 31.5" x 24" 31.5" x 27.6" x 24"

swing Ø 12.6" 16.1" 19.7"

table Ø 15.7" 19.7" 24.8"

5 Axes Machining CentersRequest Info.

model MF400U MF500U MF630UX,Y,Z axis travel 16.1" x 24" x 20" 21.7" x 31.5" x 24" 31.5" x 27.6" x 24"

swing Ø 12.6" 16.1" 19.7"

table Ø 15.7" 19.7" 24.8"

Request Info.

model UX300 UX600 UX730DYN

X,Y,Z axis travel 16.1" x 24" x 19.7" 34.8" x 31.5" x 19.7" 39.2" x 31.5" x 19.7"

swing Ø 12.7" 11" 19.7"

table Ø 15.6" 23.6" 28.7"

5 Axes Premium Machining Centers

also produces the following types of quality machining centers

vertical horizontal high speed multi pallet

1788 Northwood DriveTroy, MI 48084www.vmctechnologies.cominfo@vmctechnologies.com

call 248-786-3000