representing Quaser Horizontal Machining Centers

YMT (Brea, CA) is the importer of Quaser

horizontal machining centers.

YMT’s parts room (Brea, CA) is stocked with parts and

accessories for Quaser machining centers.

Most parts can arrived next day if needed.

VMC Technologies is theexclusive Michigan sales representative for Quaser machining centers.

VMC Technologies service dept. provides local service in Michigan for Quaser machining centers.

Machining Applications: Horizontal Machining Centers

face milling end milling drilling tapping

Advantages: Horizontal Machining Centers

#3. greater spindle run time since the machine can run almost continuously because it never sits idle during set up time

#1. chips fall away from the

cutting area

#2. accessibility to the next work piece during machining

VALUE – HIGH PRECISION – QUALITY – EASE of USE - DESIGN

#5 Reasons to consider Quaser horizontal machining centers?

#1.VALUE: Quaser horizontal machining centers were

originally developed for the Europe market where they compete with high end German machines. Theyare very closely matched or better than the German made units, but at a lower price.

#2.HIGH PRECISION: Quaser machines provide top notch

repeatable precision and accuracy. A lot of builders makes "muscle machines" with ridiculous specs but lose the ability to maintain needed accuracy. This maybe good for some markets

where they only need rough machining.

Quaser is aimed at the high precisionmarkets such as aerospace and medical.They are trying to build machines thatare in the "Zen" balance between

performance and precision.

#3.QUALITY: Quaser spends most of its revenue on R&D techniques like advanced CAD & Finite Analysis simulation software. All machines machines are built in-house are subject to pass the toughest inspection list and 48 hours continuous burn-in test before they are ready to ship out.

#4.EASE of USE: We often get the remarks "This is the easiest machine I ever operated.”

#5.DESIGN: Quaser rigid

cast designs are hand scrapped

and can withstand any

machining environment.

model HX504 HX505 HX635 HX805

X,Y,Z axis travel 30” x 25.2” x 31.5” 30” x 25.2” x 31.3” 39.4” x 31.5” 35.4”47.2” x 39.4” x

39.4”

spindle speed 15,000 rpm 10,000 rpm 10,000 rpm 10,000 rpm

Horizontal Machining Centers

Request Info.

also produces the following types of quality machining centers

vertical multi axis high speed multi pallet

1788 Northwood DriveTroy, MI 48084www.vmctechnologies.cominfo@vmctechnologies.com

call 248-786-3000