Qualkitdo Rptgenext Qualificationreport SDD Truth Table Model

8/20/2019 Qualkitdo Rptgenext Qualificationreport SDD Truth Table Model

1/45

SDD_truth_table_model.slx

Design Description

The MathWorks, Inc.


2/45


2

SDD_truth_table_model.slx: Design DescriptionThe MathWorks, Inc.

Publication date 13-Aug-2015 04:07:18

Copyright © 2015

For Internal Distribution Only


3/45

iii

Table of Contents

1. Model Version ............................................................. ................................................... 1

2. Root System ................................................................................... ................................ 2

Description ................................................. ........................................................ ........ 2

Blocks ....................................................................................................................... 2

Parameters .................................................................. ....................................... 2Block Execution Order ......................................................................................... 4

State Charts ................................ ........................................................ ........................ 5

Chart ................................................................................................................. 5

States ................................................ ....................................................... ......... 5

Data .................................................... ....................................................... ....... 6

Chart ................................................................................................................. 7

States ................................................ ....................................................... ......... 7

Data .................................................... ....................................................... ....... 8

3. Subsystems ............................................................ ........................................................ . 9

3 way source ....................................................... ....................................................... 9

Blocks ............................................................................................................... 9

3 way source1 ............................................................... ............................................ 12

Blocks .................................................... ........................................................ . 12

LinkC ................................................................................... ................................... 15

Blocks .................................................... ........................................................ . 15

State Charts ...................................... ....................................................... ......... 17

Repeating Sequence ..... ...... ..... ..... ...... ..... ...... ..... ...... ...... ..... ...... ..... ...... ...... ..... ...... ..... 18

Blocks .................................................... ........................................................ . 18

4. System Design Variables ..... ..... ...... ..... ...... ..... ...... ...... ..... ...... ..... ...... ...... ..... ...... ..... ...... ... 24

Design Variable Summary ..... ...... ..... ...... ..... ..... ...... ..... ...... ..... ...... ...... ..... ...... ..... ...... ... 24

5. System Model Configuration ...... ..... ...... ..... ..... ...... ..... ...... ..... ...... ...... ..... ...... ..... ..... ...... .... 25


4/45

iv

List of Figures

2.1. SDD_truth_table_model .................................................................................................. 2

3.1. SDD_truth_table_model/3 way source ..... ..... ...... ..... ..... ...... ..... ...... ..... ...... ...... ..... ...... ..... ... 9

3.2. SDD_truth_table_model/3 way source1 ..... ..... ...... ..... ...... ...... ..... ...... ..... ...... ...... ..... ...... .... 12

3.3. SDD_truth_table_model/LinkC ...... ..... ...... ...... ..... ...... ..... ...... ...... ..... ...... ..... ...... ...... ..... .. 15

3.4. SDD_truth_table_model/3 way source/Repeating Sequence .................................................. 183.5. Look-Up Table1 ........................................................ .................................................. 21


5/45

v

List of Tables

2.1. "Constant" Parameters .................................................................................................... 2

2.2. "Demux" Parameters ...................................................................................................... 3

2.3. "Demux2" Parameters ..... ...... ..... ...... ...... ..... ...... ..... ...... ...... ..... ...... ..... ...... ...... ..... ...... ..... 3

2.4. "Demux3" Parameters ..... ...... ..... ...... ...... ..... ...... ..... ...... ...... ..... ...... ..... ...... ...... ..... ...... ..... 3

2.5. Data - cond1 ................................................................................................................ 62.6. Data - cond2 ................................................................................................................ 6

2.7. Data - cond3 ................................................................................................................ 6

2.8. Data - in1 ... .................................... ............................................... .............................. 6

2.9. Data - in2 ... ................................. .................................................. .............................. 6

2.10. Data - in3 ............................................... ................................................................... 6

2.11. Data - out ..................................... ............................................................................. 6

2.12. Data - out .................................................. ................................................................ 6

2.13. Data - cond1 ............................................................................................................... 8

2.14. Data - cond2 ............................................................................................................... 8

2.15. Data - cond3 ............................................................................................................... 8

2.16. Data - cond4 ............................................................................................................... 8

2.17. Data - in1 ....................... ........................................................................................... 8

2.18. Data - in2 ....................... ........................................................................................... 8

2.19. Data - in3 ........................... ....................................................................................... 8

2.20. Data - in4 ........................... ....................................................................................... 8

2.21. Data - out .................................. ................................................................................ 8

2.22. Data - out ................................ .................................................................................. 8

3.1. "Constant" Parameters ..... ..... ..... ..................................................................................... 9

3.2. "Constant1" Parameters ..... ...... ..... ................................................................................ 10

3.3. "Constant2" Parameters ................................................................................................ 10

3.4. "Multiport Switch1" Parameters . ... ... ... ........................................................................... 11

3.5. "Out1" Parameters .............................. ......................................................................... 11

3.6. "Constant" Parameters .................................................................................................. 12

3.7. "Constant1" Parameters ................................................................................................ 13

3.8. "Constant2" Parameters ................................................................................................ 133.9. "Multiport Switch1" Parameters . ... ... ... ........................................................................... 14

3.10. "Out1" Parameters ..................................................................................................... 14

3.11. "In1" Parameters ........................................................................................................ 15

3.12. "In2" Parameters ........................................................................................................ 16

3.13. "Out1" Parameters ..... ..... ........................................................................................... 16

3.14. Data - cond1 ............................................................................................................. 18

3.15. Data - cond2 ............................................................................................................. 18

3.16. Data - in1 ....................... .......................................................................................... 18

3.17. Data - in2 ....................... .......................................................................................... 18

3.18. Data - out ........................... ...................................................................................... 18

3.19. Data - out ........................... ...................................................................................... 18

3.20. "Clock" Parameters . ...... ..... ........................................................................................ 18

3.21. "Constant" Parameters ................................................................................................ 193.22. "Look-Up Table1" Parameters ...................................................................................... 19

3.23. Look-Up Table1 (:,:) .................................................................................................. 21

3.24. "Math Function" Parameters ........................................................................................ 21

3.25. "Out1" Parameters ..................................................................................................... 22

3.26. "Output" Parameters ................................................................................................... 22

3.27. "startTime" Parameters . ... ... ........................................................................................ 23

3.28. "Sum" Parameters ...... ..... ........................................................................................... 23

4.1. Functions used in Design Variable Expressions ...... ...... ..... ...... ..... ..... ...... ..... ...... ..... ...... .... 24


6/45


vi

5.1. SDD_truth_table_model Configuration Set .. ..... ...... ...... ..... ...... ..... ...... ...... ..... ...... ..... ..... ... 25

5.2. SDD_truth_table_model Configuration Set.Components(1) .... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... . 25





5.7. SDD_truth_table_model Configuration Set.Components(6) .... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... . 325.8. SDD_truth_table_model Configuration Set.Components(7) .... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... . 32


5.10. SDD_truth_table_model Configuration Set.Components(9) ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 35

5.11. SDD_truth_table_model Configuration Set.Components(8).Components(1) .. .. .. .. .. .. .. .. .. .. .. .. .. . 36

5.12. SDD_truth_table_model Configuration Set.Components(8).Components(2) .. .. .. .. .. .. .. .. .. .. .. .. .. . 37


7/45

1

Chapter 1. Model VersionVersion: 1.18

Last modified: Thu Mar 28 07:51:40 2013

Checksum: 1113995358 2397200176 201716651 2463850836


8/45

2

Chapter 2. Root System

Table of Contents

Description ............................................... ........................................................ .................. 2

Blocks ............................................................................................................................... 2

Parameters ................................................................ ................................................. 2

Block Execution Order ................................................................................................. 4

State Charts ................................................. ....................................................... ................ 5

Chart ......................................................................................................................... 5

States ....................................................... ........................................................ ......... 5

Data .................................................. ........................................................ ................ 6

Chart ......................................................................................................................... 7

States ....................................................... ........................................................ ......... 7

Data .................................................. ........................................................ ................ 8

Figure 2.1. SDD_truth_table_model

Copyright 2009-2011 The MathWorks, Inc.

Simulink Report Generator (SDD Report) Test Model

SDD_truth_table_model

In1

In2

Out1

LinkC

in1

in2

in3

in4

out

LinkA

[1 0]

in1

in2

in3

out

ChartC

Out1

3 way source1

Out1

3 way source

Description

Simulink Report Generator (SDD Report) Test Model

Blocks

Parameters

"Constant" (Constant)

Table 2.1. "Constant" Parameters

Parameter Value

Constant value [1 0]


9/45

Root System

3

Parameter Value

Interpret vector paramet-

ers as 1-D

on

Output minimum []

Output maximum []

Output data type Inherit: Inherit from 'Constant value'

Lock output data type se-

tting against changes by

the fixed-point tools

off

Sample time inf

Frame period inf

"Demux" (Demux)

Table 2.2. "Demux" Parameters

Parameter Value

Number of outputs 4

Display option none

Bus selection mode off

"Demux2" (Demux)

Table 2.3. "Demux2" Parameters

Parameter Value

Number of outputs 3

Display option none


"Demux3" (Demux)

Table 2.4. "Demux3" Parameters

Parameter Value

Number of outputs 2

Display option none


10/45

Root System

4

Parameter Value


Block Execution Order

1. Constant [9] (Constant)

2. Constant1 [10] (Constant)


4. Clock [18] (Clock)

5. startTime [22] (S-Function)

6. Sum [23] (Sum)


8. Math Function [21] (Math)

9. Look-Up Table1 [19] (Lookup_n-D)

10. Multiport Switch1 [11] (MultiPortSwitch)

11. LinkA

1. SFunction (S-Function)




15. Clock (Clock)

16. startTime (S-Function)

17. Sum (Sum)

18. Constant (Constant)

19. Math Function (Math)20. Look-Up Table1 (Lookup_n-D)

21. Multiport Switch1 [14] (MultiPortSwitch)

22. ChartC



24. ChartB



11/45

Root System

5

State Charts

Chart

out = table3(cond1,cond2,cond3)

truthtable

{out = table3(in1,in2,in3);}

1

2

table3 [5]

{out = table3(in1,in2,in3);}

States

TruthTable - table3

out = table3(cond1,cond2,cond3)

truthtable

T - - -

- T - -

- - T -

Actions: 1 2 3 5

1 out = 1;


12/45

Root System

6

2 out = 2;

3 out = 3;

4 out = 4;

5 out = 5;

Data

Table 2.5. Data - cond1

Scope Input


Scope Input


Scope Input

Table 2.8. Data - in1

Scope Input


Scope Input


Scope Input

Table 2.11. Data - out

Scope Output


Scope Output


13/45

Root System

7

Chart

out = table1(cond1,cond2,cond3,cond4)

truthtable

{out = table1(in1,in2,in3,in4);}

1

2

table1 [7]

{out = table1(in1,in2,in3,in4);}

StatesTruthTable - table1

out = table1(cond1,cond2,cond3,cond4)

truthtable

T F F F -

F T F F -

F F T F -

F F F T -

Actions: 1 2 3 4 5

1 out = 1;

2 out = 2;


14/45

Root System

8

3 out = 3;

4 out = 4;

5 out = 5;

Data


Scope Input


Scope Input


Scope Input


Scope Input


Scope Input


Scope Input


Scope Input


Scope Input


Scope Output


Scope Output


15/45

9

Chapter 3. Subsystems

Table of Contents

3 way source .................................................................................................. .................... 9

Blocks ....................................................................................................................... 9

3 way source1 ............................................................ ....................................................... 12

Blocks .................................................. ........................................................ ........... 12

LinkC ................................................................................. ............................................. 15

Blocks .................................................. ........................................................ ........... 15

State Charts ....... ........................................................ ............................................... 17

Repeating Sequence ...... ..... ...... ..... ..... ...... ..... ...... ..... ...... ...... ..... ...... ..... ..... ...... ..... ...... ..... ... 18

Blocks .................................................. ........................................................ ........... 18

3 way source

Figure 3.1. SDD_truth_table_model/3 way source

1

Out1

0

1

*, 2

Multiport

Switch1[1 1 1 1]

[0 0 1 0]

[1 0 0 0]

Blocks

Parameters



Parameter Value

Constant value [1 0 0 0]


ers as 1-D

on

Output minimum []


16/45

Subsystems

10

Parameter Value

Output maximum []





off

Sample time inf

Frame period inf

"Constant1" (Constant)

Table 3.2. "Constant1" Parameters

Parameter Value



ers as 1-D

on

Output minimum []

Output maximum []





off

Sample time inf

Frame period inf



Parameter Value



ers as 1-D

on

Output minimum []

Output maximum []





off

Sample time inf

Frame period inf


17/45

Subsystems

11

"Multiport Switch1" (MultiPortSwitch)

Table 3.4. "Multiport Switch1" Parameters

Parameter Value

Data port order Zero-based contiguous

Number of data ports 3

Data port indices (e.g. {1,

[2,3]})

{1,2,3}

Data port for default case Last data port

Diagnostic for default ca-

se

Error

Require all data port inp-

uts to have the same data

type

off

Output minimum []

Output maximum []

Output data type Inherit: Inherit via internal rule




off

Integer rounding mode Floor

Saturate on integer overf-

low

on

Sample time (-1 for inhe-

rited)

-1

Allow different data inp-

ut sizes (Results in varia-

ble-size output signal)

off

"Out1" (Outport)

Table 3.5. "Out1" Parameters

Parameter Value

Port number 1

Icon display Port number

Minimum []

Maximum []

Data type Inherit: auto




off


18/45

Subsystems

12

Parameter Value

Output as nonvirtual bus

in parent model

off

Port dimensions (-1 for

inherited)

-1

Variable-size signal Inherit


rited)

-1

Source of initial output

value

Dialog

Output when disabled held

Initial output []

3 way source1Figure 3.2. SDD_truth_table_model/3 way source1

1

Out1

0

1

*, 2

Multiport

Switch1[0 0 1]

[0 1 0]

[1 0 0]

Blocks

Parameters



Parameter Value

Constant value [1 0 0]


ers as 1-D

on

Output minimum []


19/45

Subsystems

13

Parameter Value

Output maximum []





off

Sample time inf

Frame period inf



Parameter Value



ers as 1-D

on

Output minimum []

Output maximum []





off

Sample time inf

Frame period inf



Parameter Value



ers as 1-D

on

Output minimum []

Output maximum []





off

Sample time inf


20/45

Subsystems

14

Parameter Value

Frame period inf

"Multiport Switch1" (MultiPortSwitch)

Table 3.9. "Multiport Switch1" Parameters

Parameter Value

Data port order Zero-based contiguous

Number of data ports 3

Data port indices (e.g. {1,

[2,3]})

{1,2,3}

Data port for default case Last data port

Diagnostic for default ca-

se

Error

Require all data port inp-

uts to have the same data

type

off

Output minimum []

Output maximum []

Output data type Inherit: Inherit via internal rule




off


Saturate on integer overf-low

on


rited)

-1

Allow different data inp-

ut sizes (Results in varia-

ble-size output signal)

off

"Out1" (Outport)

Table 3.10. "Out1" ParametersParameter Value

Port number 1


Minimum []

Maximum []



21/45

Subsystems

15

Parameter Value




off


in parent model

off


inherited)

-1



rited)

-1


value

Dialog


Initial output []

LinkC

Figure 3.3. SDD_truth_table_model/LinkC

1

Out1

in1

in2

out

ChartB

2

In2

1

In 1

Blocks

Parameters

"In1" (Inport)

Table 3.11. "In1" Parameters

Parameter Value

Port number 1


inherited)

-1


rited)

-1

Minimum []


22/45

Subsystems

16

Parameter Value

Maximum []


"In2" (Inport)

Table 3.12. "In2" Parameters

Parameter Value

Port number 2


inherited)

-1


rited)

-1

Minimum []

Maximum []


"Out1" (Outport)


Parameter Value

Port number 1


Minimum []

Maximum []





off


in parent model

off


inherited)

-1



rited)

-1


value

Dialog


Initial output []


23/45

Subsystems

17

State Charts

Chart

out = table2(cond1,cond2)truthtable

{out = table2(in1,in2);}

1

2

table2 [17]

{out = table2(in1,in2);}

States

TruthTable - table2

out = table2(cond1,cond2)truthtable

T F T F

F T T F

Actions: 1 2 3 4

1 out = 1;

2 out = 2;

3 out = 3;

4 out = 4;


24/45


25/45

Subsystems

19



Parameter Value

Constant value period


ers as 1-D

on

Output minimum []

Output maximum []





off

Sample time inf

Frame period inf

"Look-Up Table1" (Lookup_n-D)

Table 3.22. "Look-Up Table1" Parameters

Parameter Value

Number of table dimens-

ions

1

Breakpoints specification Explicit values

Breakpoints for dimensi-

on 1

rep_seq_t - min(rep_seq_t)

Breakpoints First Point

for dimension 1

1

Breakpoints Spacing for

dimension 1

1

Breakpoints minimum

for dimension 1

[]

Breakpoints maximum

for dimension 1

[]

Breakpoints data type fordimension 1

Inherit: Same as corresponding input

Index search method Binary search

Begin index search using

previous index result

off

Use one input port for all

input data

off

Table data rep_seq_y


26/45

Subsystems

20

Parameter Value

Table minimum []

Table maximum []

Table data type Inherit: Same as output

Intermediate results data

type

Inherit: Same as output

Interpolation method Linear

Extrapolation method Linear

Diagnostic for out-of-ra-

nge input

None

Remove protection agai-

nst out-of-range input in

generated code

off

Use last table value for

inputs at or above last br-

eakpoint

off


rited)

-1

Internal rule priority Speed

Require all inputs to have

the same data type

on

Output minimum []

Output maximum []

Output data type Inherit: Same as first input

Lock data type settings

against changes by the fi-

xed-point tools

off



low

on

Fraction data type Inherit: Inherit via internal rule

Support tunable table size

in code generation

off

Maximum indices for ea-

ch dimension

[]


27/45

Subsystems

21

Figure 3.5. Look-Up Table1

Table 3.23. Look-Up Table1 (:,:)

0 0

3 0

3.0000 1

6 1

6.0000 2

10 2

"Math Function" (Math)

Table 3.24. "Math Function" Parameters

Parameter Value

Function rem


rited)

-1

Output minimum []

Output maximum []Output data type Inherit: Same as first input




off



low

on


28/45

Subsystems

22

Parameter Value

Intermediate results data

type

Inherit: Inherit via internal rule

Method Newton-Raphson

Number of iterations 3

"Out1" (Outport)


Parameter Value

Port number 1


Minimum []

Maximum []Data type Inherit: auto




off


in parent model

off


inherited)

-1



rited)

-1


value

Dialog


Initial output []

"Output" (SignalConversion)

Table 3.26. "Output" Parameters

Parameter Value

Output Signal copy


Exclude this block from

'Block reduction' optimi-

zation

off


29/45

Subsystems

23

"startTime" (S-Function)

Table 3.27. "startTime" Parameters

Parameter Value

S-function name sfun_tstart

S-function modules ''

"Sum" (Sum)

Table 3.28. "Sum" Parameters

Parameter Value

Icon shape rectangular

List of signs +-

Sum over All dimensions

Dimension 1

Require all inputs to have

the same data type

on

Accumulator data type Inherit: Inherit via internal rule

Output minimum []

Output maximum []

Output data type Inherit: Same as first input

Lock data type settings

against changes by the fi-

xed-point tools

off



low

on


rited)

-1


30/45

24

Chapter 4. System Design Variables

Table of Contents

Design Variable Summary ...... ..... ...... ...... ..... ...... ..... ...... ...... ..... ...... ..... ...... ...... ..... ...... ..... .... 24

Design Variable Summary

Table 4.1. Functions used in Design Variable Expressions

Function Na-

me

Parent Blocks Calling string

eps Repeating Sequence [12]

Repeating Sequence [15]

[0 3 3+eps(3) 6 6+ep-

s(6) 10]

[0 3 3+eps(3) 6 6+ep-

s(6) 10]


31/45

25

Chapter 5. System Model ConfigurationSource: Model

Source Name: SDD_truth_table_model

Table 5.1. SDD_truth_table_model Configuration Set

Property Value

Description

Components [SDD_truth_table_model Configuration Set.Com-

ponents(1) [25], SDD_truth_table_model Co-

nfiguration Set.Components(2) [26], SDD_tr-

uth_table_model Configuration Set.Components(-

3) [27], SDD_truth_table_model Configurati-

on Set.Components(4) [28], SDD_truth_table-

_model Configuration Set.Components(5) [31],

SDD_truth_table_model Configuration Set.Comp-onents(6) [32], SDD_truth_table_model Con-

figuration Set.Components(7) [32], SDD_tru-

th_table_model Configuration Set.Components(8-

) [33], SDD_truth_table_model Configuration

Set.Components(9) [35]]

Name Configuration

SimulationMode normal

Table 5.2. SDD_truth_table_model Configuration Set.Components [25](1)

Property Value

Name Solver

Description

Components

StartTime 0.0

StopTime 10.0

AbsTol auto

FixedStep 1

InitialStep auto

MaxNumMinSteps -1

MaxOrder 5

ZcThreshold auto

ConsecutiveZCsStepRelTol 10*128*eps

MaxConsecutiveZCs 1000

ExtrapolationOrder 4

NumberNewtonIterations 1

MaxStep auto


32/45

System Model Configuration

26

MinStep auto

MaxConsecutiveMinStep 1

RelTol 1e-3

SolverMode Auto

EnableConcurrentExecution off

ConcurrentTasks off

Solver FixedStepDiscrete

SolverName FixedStepDiscrete

SolverType Fixed-step

SolverJacobianMethodControl auto

ShapePreserveControl DisableAll

ZeroCrossControl UseLocalSettings

ZeroCrossAlgorithm Nonadaptive

SolverResetMethod Fast

PositivePriorityOrder off

AutoInsertRateTranBlk off

SampleTimeConstraint Unconstrained

InsertRTBMode Whenever possible

SampleTimeProperty


Property Value

Name Data Import/Export

Description

Components

Decimation 1

ExternalInput [t, u]

FinalStateName xFinal

InitialState xInitial

LimitDataPoints on

MaxDataPoints 1000

LoadExternalInput off

LoadInitialState off

SaveFinalState off

SaveCompleteFinalSimState off

SaveFormat Array

SignalLoggingSaveFormat ModelDataLogs

SaveOutput on

SaveState off


33/45


27

SignalLogging on

DSMLogging on

InspectSignalLogs off

VisualizeSimOutput on

StreamToWorkspace off

StreamVariableName streamout

SaveTime on

ReturnWorkspaceOutputs off

StateSaveName xout

TimeSaveName tout

OutputSaveName yout

SignalLoggingName sigsOut

DSMLoggingName dsmout

OutputOption RefineOutputTimes

OutputTimes []

ReturnWorkspaceOutputsName out

Refine 1

LoggingIntervals [-inf, inf]


Property Value

Name Optimization

Description

Components

BlockReduction on

BooleanDataType on

ConditionallyExecuteInputs on

DefaultParameterBehavior Tunable

InlineParams off

UseDivisionForNetSlopeComputation off

UseFloatMulNetSlope off

DefaultUnderspecifiedDataType double

UseSpecifiedMinMax off

InlineInvariantSignals off

OptimizeBlockIOStorage on

BufferReuse on

GlobalBufferReuse on

GlobalVariableUsage None

StrengthReduction off


34/45


28

AdvancedOptControl

EnforceIntegerDowncast on

ExpressionFolding on

BooleansAsBitfields off

BitfieldContainerType uint_T

EnableMemcpy on

MemcpyThreshold 64

PassReuseOutputArgsAs Structure reference

PassReuseOutputArgsThreshold 12

FoldNonRolledExpr on

LocalBlockOutputs on

RollThreshold 5

StateBitsets off

DataBitsets off

ActiveStateOutputEnumStorageType Native Integer

UseTempVars off

ZeroExternalMemoryAtStartup on

ZeroInternalMemoryAtStartup on

InitFltsAndDblsToZero off

NoFixptDivByZeroProtection off

EfficientFloat2IntCast off

EfficientMapNaN2IntZero on

OptimizeModelRefInitCode off

LifeSpan inf

EvaledLifeSpan Inf

MaxStackSize Inherit from target

BufferReusableBoundary on

SimCompilerOptimization off

AccelVerboseBuild off


Property Value

Name Diagnostics

Description

Components

RTPrefix error

ConsistencyChecking none

ArrayBoundsChecking none

SignalInfNanChecking none


35/45


29

SignalRangeChecking none

ReadBeforeWriteMsg UseLocalSettings

WriteAfterWriteMsg UseLocalSettings

WriteAfterReadMsg UseLocalSettings

AlgebraicLoopMsg warning

ArtificialAlgebraicLoopMsg warning

SaveWithDisabledLinksMsg warning

SaveWithParameterizedLinksMsg none

CheckSSInitialOutputMsg on

UnderspecifiedInitializationDetection Classic

MergeDetectMultiDrivingBlocksExec none

CheckExecutionContextPreStartOutputMsg off

CheckExecutionContextRuntimeOutputMsg off

SignalResolutionControl TryResolveAllWithWarning

BlockPriorityViolationMsg warning

MinStepSizeMsg warning

TimeAdjustmentMsg none

MaxConsecutiveZCsMsg error

MaskedZcDiagnostic warning

IgnoredZcDiagnostic warning

SolverPrmCheckMsg none

InheritedTsInSrcMsg warning

MultiTaskDSMMsg warning

MultiTaskCondExecSysMsg none

MultiTaskRateTransMsg error

SingleTaskRateTransMsg none

TasksWithSamePriorityMsg warning

SigSpecEnsureSampleTimeMsg warning

CheckMatrixSingularityMsg none

IntegerOverflowMsg warning

Int32ToFloatConvMsg warning

ParameterDowncastMsg error

ParameterOverflowMsg errorParameterUnderflowMsg none

ParameterPrecisionLossMsg warning

ParameterTunabilityLossMsg warning

FixptConstUnderflowMsg none

FixptConstOverflowMsg none

FixptConstPrecisionLossMsg none


36/45


30

UnderSpecifiedDataTypeMsg none

UnnecessaryDatatypeConvMsg none

VectorMatrixConversionMsg none

InvalidFcnCallConnMsg error

FcnCallInpInsideContextMsg UseLocalSettings

SignalLabelMismatchMsg none

UnconnectedInputMsg warning

UnconnectedOutputMsg warning

UnconnectedLineMsg warning

SFcnCompatibilityMsg none

FrameProcessingCompatibilityMsg error

UniqueDataStoreMsg none

BusObjectLabelMismatch warning

RootOutportRequireBusObject warning

AssertControl UseLocalSettings

Echo

EnableOverflowDetection off

AllowSymbolicDim off

ModelReferenceIOMsg none

ModelReferenceVersionMismatchMessage none

ModelReferenceIOMismatchMessage none

ModelReferenceCSMismatchMessage none

ModelReferenceSimTargetVerbose off

UnknownTsInhSupMsg warning

ModelReferenceDataLoggingMessage warning

ModelReferenceSymbolNameMessage warning

ModelReferenceExtraNoncontSigs error

StateNameClashWarn warning

SimStateInterfaceChecksumMismatchMsg warning

SimStateOlderReleaseMsg error

InitInArrayFormatMsg warning

StrictBusMsg ErrorLevel1

BusNameAdapt WarnAndRepairNonBusSignalsTreatedAsBus none

SFUnusedDataAndEventsDiag warning

SFUnexpectedBacktrackingDiag warning

SFInvalidInputDataAccessInChartInitDiag warning

SFNoUnconditionalDefaultTransitionDiag warning

SFTransitionOutsideNaturalParentDiag warning


37/45


31

SFUnconditionalTransitionShadowingDiag warning

SFUndirectedBroadcastEventsDiag warning

SFTransitionActionBeforeConditionDiag warning

SFOutputUsedAsStateInMooreChartDiag error

IntegerSaturationMsg warning


Property Value

Name Hardware Implementation

Description

Components

ProdBitPerChar 8

ProdBitPerShort 16

ProdBitPerInt 32

ProdBitPerLong 32

ProdBitPerLongLong 64

ProdBitPerFloat 32

ProdBitPerDouble 64

ProdBitPerPointer 32

ProdLargestAtomicInteger Char

ProdLargestAtomicFloat None

ProdIntDivRoundTo Undefined

ProdEndianess Unspecified

ProdWordSize 32

ProdShiftRightIntArith on

ProdLongLongMode off

ProdHWDeviceType 32-bit Generic

TargetBitPerChar 8

TargetBitPerShort 16

TargetBitPerInt 32

TargetBitPerLong 32

TargetBitPerLongLong 64

TargetBitPerFloat 32

TargetBitPerDouble 64

TargetBitPerPointer 32

TargetLargestAtomicInteger Char

TargetLargestAtomicFloat None

TargetShiftRightIntArith on

TargetLongLongMode off


38/45


39/45


33

SimReservedNameArray

SimUserSources

SimUserIncludeDirs

SimUserLibraries

SFSimEnableDebug off

SFSimOverflowDetection on

SFSimEcho on

SimBlas on

SimCtrlC on

SimExtrinsic on

SimIntegrity on

SimUseLocalCustomCode off

SimParseCustomCode on

SimBuildMode sf_incremental_build

SimDataInitializer

SimGenImportedTypeDefs off


Property Value

Name Code Generation

SystemTargetFile grt.tlc

TLCOptions

CodeGenDirectory

GenCodeOnly off

MakeCommand make_rtw

GenerateMakefile on

PackageGeneratedCodeAndArtifacts off

PackageName

TemplateMakefile grt_default_tmf

PostCodeGenCommand

Description

GenerateReport off

SaveLog off

RTWVerbose on

RetainRTWFile off

ProfileTLC off

TLCDebug off

TLCCoverage off

TLCAssert off


40/45


34

ProcessScriptMode Default

ConfigurationMode Optimized

ProcessScript

ConfigurationScript

ConfigAtBuild off

RTWUseLocalCustomCode off

RTWUseSimCustomCode off

CustomSourceCode

CustomHeaderCode

CustomInclude

CustomSource

CustomLibrary

CustomInitializer

CustomTerminator

Toolchain Automatically locate an installed toolchain

BuildConfiguration Faster Builds

CustomToolchainOptions

IncludeHyperlinkInReport off

LaunchReport off

PortableWordSizes off

GenerateErtSFunction off

CreateSILPILBlock None

CodeExecutionProfiling off

CodeExecutionProfileVariable executionProfile

CodeProfilingSaveOptions SummaryOnly

CodeProfilingInstrumentation off

SILDebugging off

TargetLang C

IncludeERTFirstTime on

GenerateTraceInfo off

GenerateTraceReport off

GenerateTraceReportSl off

GenerateTraceReportSf offGenerateTraceReportEml off

GenerateCodeInfo off

GenerateWebview off

GenerateCodeMetricsReport off

GenerateCodeReplacementReport off

RTWCompilerOptimization off


41/45


35

ObjectivePriorities

RTWCustomCompilerOptimizations

CheckMdlBeforeBuild Off

CustomRebuildMode OnUpdate

DataInitializer

Components [SDD_truth_table_model Configuration Set.Comp-

onents(8).Components(1) [36], SDD_truth_ta-

ble_model Configuration Set.Components(8).Com-

ponents(2) [37]]


Property Value

Description Simulink Coverage Configuration Component

Components

Name Simulink Coverage

RecordCoverage on

CovPath /

CovSaveName covdata

CovCompData

CovMetricSettings dcmw

CovFilter

CovHTMLOptions

CovNameIncrementing off

CovHtmlReporting on

CovForceBlockReductionOff on

CovEnableCumulative on

CovSaveCumulativeToWorkspaceVar on

CovSaveSingleToWorkspaceVar on

CovCumulativeVarName covCumulativeData

CovCumulativeReport off

CovReportOnPause on

CovModelRefEnable off

CovModelRefExcluded

CovExternalEMLEnable off

CovSFcnEnable on

CovBoundaryAbsTol 1.0000e-05

CovBoundaryRelTol 0.0100

CovUseTimeInterval off

CovStartTime 0


42/45


36

CovStopTime 0

Table 5.11. SDD_truth_table_model Configuration

Set.Components(8).Components [35](1)

Property ValueName Code Appearance

Description

Components

ForceParamTrailComments off

GenerateComments on

CommentStyle Auto

IgnoreCustomStorageClasses on

IgnoreTestpoints off

IncHierarchyInIds off

MaxIdLength 31

PreserveName off

PreserveNameWithParent off

ShowEliminatedStatement off

OperatorAnnotations off

IncAutoGenComments off

SimulinkDataObjDesc off

SFDataObjDesc off

MATLABFcnDesc off

IncDataTypeInIds off

PrefixModelToSubsysFcnNames on

MangleLength 1

CustomSymbolStr $R$N$M

CustomSymbolStrGlobalVar $R$N$M

CustomSymbolStrType $N$R$M_T

CustomSymbolStrField $N$M

CustomSymbolStrFcn $R$N$M$F

CustomSymbolStrFcnArg rt$I$N$M

CustomSymbolStrBlkIO rtb_$N$M

CustomSymbolStrTmpVar $N$M

CustomSymbolStrMacro $R$N$M

CustomSymbolStrUtil $N$C

CustomCommentsFcn

DefineNamingRule None

DefineNamingFcn


43/45


37

ParamNamingRule None

ParamNamingFcn

SignalNamingRule None

SignalNamingFcn

InsertBlockDesc off

InsertPolySpaceComments off

SimulinkBlockComments on

MATLABSourceComments off

EnableCustomComments off

InternalIdentifier Shortened

InlinedPrmAccess Literals

ReqsInCode off

UseSimReservedNames off

ReservedNameArray

Table 5.12. SDD_truth_table_model Configuration

Set.Components(8).Components [35](2)

Property Value

Name Target

Description

Components

IsERTTarget off

TargetFcnLib ansi_tfl_table_tmw.mat

TargetLibSuffix

TargetPreCompLibLocation

GenFloatMathFcnCalls NOT IN USE

TargetLangStandard C89/C90 (ANSI)

TargetFunctionLibrary NOT IN USE

CodeReplacementLibrary None

UtilityFuncGeneration Auto

ERTMultiwordTypeDef System defined

ERTMultiwordLength 256

MultiwordLength 2048

GenerateFullHeader on

InferredTypesCompatibility off

GenerateSampleERTMain off

GenerateTestInterfaces off

ModelReferenceCompliant on

ParMdlRefBuildCompliant on


44/45


38

CompOptLevelCompliant on

ConcurrentExecutionCompliant on

IncludeMdlTerminateFcn on

CombineOutputUpdateFcns off

CombineSignalStateStructs off

SuppressErrorStatus off

ERTFirstTimeCompliant off

IncludeFileDelimiter Auto

ERTCustomFileBanners off

SupportAbsoluteTime on

LogVarNameModifier rt_

MatFileLogging on

MultiInstanceERTCode off

CodeInterfacePackaging Nonreusable function

SupportNonFinite on

SupportComplex on

PurelyIntegerCode off

SupportContinuousTime on

SupportNonInlinedSFcns on

SupportVariableSizeSignals off

ParenthesesLevel Nominal

CastingMode Nominal

GenerateClassInterface off

ModelStepFunctionPrototypeControlCompliant off

CPPClassGenCompliant on

GRTInterface on

GenerateAllocFcn off

UseToolchainInfoCompliant on

GenerateSharedConstants on

ExtMode off

ExtModeStaticAlloc off

ExtModeTesting off

ExtModeStaticAllocSize 1000000ExtModeTransport 0

ExtModeMexFile ext_comm

ExtModeMexArgs

ExtModeIntrfLevel Level1

RTWCAPISignals off

RTWCAPIParams off


45/45


RTWCAPIStates off

RTWCAPIRootIO off

GenerateASAP2 off

MultiInstanceErrorCode Error

Qualkitdo Rptgenext Qualificationreport SDD Truth Table Model

Documents

Transcript of Qualkitdo Rptgenext Qualificationreport SDD Truth Table Model