QUALITY HEATING AND COOLING PARTS - Carquest HEATING AND COOLING PARTS ... 4 Heating and Cooling...
Transcript of QUALITY HEATING AND COOLING PARTS - Carquest HEATING AND COOLING PARTS ... 4 Heating and Cooling...
2 Heating and Cooling Parts • For more information, contact your local delivery store.
CARQUEST® RADIATORSCarquest premium-quality radiators meet or exceed OE specifications and undergo
stringent testing to ensure superior performance.
• Manufactured with enhanced B Tube design (where applicable) — Improves both tube strength
and cooling efficiency through greater surface contact for the coolant as it flows through the radiator
• Tube reinforcements — Included with larger radiators, solves leading industry failure
point by adding rigidity, and reducing the stress on the end tubes
• High efficiency cores (where applicable) — Increases the total amount of tubes and
fins, while decreasing the core thickness, providing more cooling in a narrower design
• OE quality
• 100% triple tested
- Laser tested for dimensional compliance
- Transmission and oil coolers are 100% leak tested prior to installation
- Final assembly is 100% leak tested
• Approximately 98% import and domestic coverage — For cars and light trucks
on the road today
• 1390 part numbers available
CARQUEST® HEATER CORESCarquest heater cores are premium-quality parts that meet or exceed OE specifications
and endure stringent testing to ensure superior performance.
• Carquest heater cores meet or exceed OE quality and are 100% triple tested —
In the actual vehicle HVAC heater module:
- Weld integrity is digitally inspected to ensure long-life
- Dimensional accuracy is laser measured to ensure proper form and function
- Final assembly is air pressure leak tested
• Internal coolant passages (tubes) — With corrosion resistant
cladding alloy 7072 to inhibit galvanic corrosion and pitting
• Side sections are brazed at the header — To ensure a
strong joint and ribbed to increase strength and rigidity
• 94% import and domestic coverage — For cars and
light trucks on the road today
• 506 part numbers available
For customer care assistance and technical support, call 1-877-280-5965. • Visit www.AdvancePro.com 3
CARQUEST® WATER PUMPSCarquest water pumps are premium-quality parts that meet or exceed OE
specifications and undergo stringent testing to ensure superior performance.
• OE quality — To meet or exceed OE specifications
• 100% triple tested
- Leakage test ensures proper assembly of the seal and verifies
it meets tolerances, preventing premature wear
- Rotation variance test ensures no vibration and prevents out
of balance conditions
- Torque test ensures each part is of the highest quality
to eliminate premature failures
• 99% import and domestic coverage — For cars and
light trucks on the road today
CARQUEST® FAN CLUTCHESCarquest fan clutches are designed, tested and validated to strict OE
performance specifications.
• Every manufactured unit meets all TS/ISO requirements
• Testing includes life cycle and failure analysis
• Production testing throughout each run
• Testing must meet all specifications — For emission
control requirements and to maximize vehicle fuel economy
4 Heating and Cooling Parts • For more information, contact your local delivery store.
FEL-PRO® GASKETSLeak repair is inherently problematic. It requires the wide
variety of application-specific materials and designs that
only Fel-Pro can deliver.
Fel-Pro® PermaDryPlus® problem-solving gaskets feature
the latest technologies designed specifically for the
aftermarket repair environment. Be confident with an easy,
precise fit and superior sealing performance, even on
problematic applications.
MAHLE ORIGINAL® GASKETSThe original choice in OE sealing solutions.
MAHLE Original® gaskets are application
engineered; designing engine gaskets as
a system involving research and testing to
apply the optimum mix of materials and
technology to each engine application.
CARQUEST® BY DAYCO® BELTS & TENSIONERSCarquest serpentine belts by Dayco meet or exceed OE specifications and are
made with an EPDM extended-life rubber compound to prevent premature wear,
lasting up to 100,000 miles.
• Dayco “W” profile Poly Rib® belts are the best solution for higher-mileage
vehicles and/or troublesome drives
• Designed and constructed to be vehicle specific
For customer care assistance and technical support, call 1-877-280-5965. • Visit www.AdvancePro.com 5
CARQUEST® CAPSCarquest offers a complete line of radiator, fuel, DEF, and
oil caps for cars and light and heavy duty trucks.
• Meets or exceeds OE specs — For exact fit and long life
• 100% factory tested
• Coverage for 98% of the vehicles on the road
• Made by Stant
CARQUEST® THERMOSTATS AND WATER OUTLET ASSEMBLIES• Optimal engine performance and fuel economy
• Quality construction
• OE fit, form and performance
• 100% calibrated
CARQUEST® BY DAYCO® TIMING BELT COMPONENTSA new timing belt installed with worn timing components can
reduce the life by 50%. Get the most convenient solution
when replacing all major components in a timing belt job. All
kit components are built in the OE manufacturing facility and
prepackaged for safe delivery.
• Timing belt kits include: timing belt, tensioners, pulleys, springs,
hardware, and tri-lingual installation instructions; more than 250
part numbers covering 52 million vehicles are available
• Timing belt water pump kits include everything for a timing belt
job; more than 200 part numbers covering 51 million vehicles
are available
• 97% coverage of timing belt application vehicles
on the road today
6 Heating and Cooling Parts • For more information, contact your local delivery store.
CARQUEST® BY DAYCO® DEMANDING DRIVE KITSMany of today’s vehicles have complex accessory drive systems that require the
replacement of all worn components in order to operate properly. Dayco Demanding Drive
Kits provide all required components in order to ensure a quiet, problem-free belt drive
system. When applicable, kit can include:
• Poly Rib W² Serpentine Belt
• No Slack Automatic Belt Tensioner
• No Slack Idler/Tensioner Pulley
• Overrunning Alternator Pulley
CARQUEST BY DAYCO® HOSES• Made with synthetic EPDM rubber compounds
• Inner base tube is reinforced with knitted rayon
• Meets SAE J20R4, class D-1 requirements for improved service hose
CARQUEST® BLOWER MOTORS• Problem solving designs on high failure rate motors
to improve durability vs. OE design
• Meets or exceeds OE design and performance
• 604 part numbers available
• Limited Lifetime Warranty
For customer care assistance and technical support, call 1-877-280-5965. • Visit www.AdvancePro.com 7
DORMAN® RADIATOR FAN ASSEMBLIESRestore optimal air flow to your customer’s vehicle to prevent overheating.
Ready to install with the motor, shroud, and blade. Plus, the high fiberglass
content offers extra strength and rigidity while improving thermal stability.
• Plug and play jumper harness included (where applicable)
• Direct-fit replacement — For OE designs
• Fan motors are tested at independent labs —
To ensure quality and durability
• 905 part numbers available
• Limited Lifetime Warranty
BLEND DOOR ACTUATORS
Re-engineered with an upgraded motor or internal
materials for increased durability and performance
(where applicable).
• Reduce repair costs and installation time by
replacing the failed actuator, instead of the
entire assembly
• 289 part numbers available
• Limited Lifetime Warranty
HEATER CONTROL VALVES• Application specific design
• Matches OE for fit, form, and function
• Vacuum and pressure tested to 270 degrees
• 144 part numbers available