Qualification Manual

Middle East Specialized Cables Company / MESC-Jordan - Formerly Jordan New Cable Company - is a public shareholding company that was established in 1992 as manufacturer of low Voltage power cables and wires with the mission of supplying Jordan and the regional markets with high quality products and services that will contribute to the development of the region. The plant is located on the main Amman- Mafraq highway, 60 km from Amman in northern Jor-dan. Covering an Area of 53,000 m2 out of the 210,000 m2 available, MESC-Jordan premises are equipped with state-of-the-art facilities, machinery and laboratories that ensure the supply of top quality products and services. Aiming for perfection, MESC-Jordan works hard to continuously improve the quality of its prod-ucts and services. The company believes that developing a link between the customer and the product will optimize efficiency, which then becomes the primary factor in winning customer loyal-ty. During the last couples of years MESC-Jordan acquisition MESC For Medium and High Voltage Cables Company (Formerly MESC-Fujikura Cable Company) and expand its product range to include instrumentation and process control cables. Besides being ISO 9001:2008 and BASEC certified, MESC-Jordan products are manufactured ac-cording to international standards and are tested and certified by prestigious institutions such as BS, VDE, IEC, ASTM and DIN. MESC-Jordan employed the state of the art facilities and using the highest grade production machines available today. The facility includes a two Catenary type Con-tinuous Vulcanizer (CCV) line to produce XLPE Medium and High voltage cables with the highest quality. Backed with latest technology, supervision and know how from Fujikura Ltd Japan MESC-Jordan products mix is classified into the following categories:

Domestic Cables. Low Voltage Power Cables 0.6/1kV. Medium and high Voltage Power Cables up to 132KV. Instrumentation and Control Cables. Overhead and Bare Conductors. Fire Resistant ant and Special cables.

MESC-Jordan is looking forward to build strong ties with your company based on mutual under-standing and trust. Therefore this qualification manual has been released to share with you MESC-Jordan accreditations and general information to clear any ambiguity. For more information you can contact us at [email protected]. We will be pleased to serve you at anytime.

In the Name of God most Glorious the Merciful

i

ii

Table of Contents

Page #. Part 1: General Information

Introduction 1.1 Our vision 1.1 Our mission 1.1 Main offices 1.1 Manufacturing plant 1.1 Plant Layout 1.2

Manpower 1.3 Part 2: Product Range

Part 3: Quality

Introduction 3.1 Quality control 3.1

Product identification and traceability 3.1 Quality assurance 3.1

Non conforming products 3.3 Testing equipment 3.3 Procurement management 3.3 Part 4: Sales Department

Introduction 4.1 Services 4.1 Quotations 4.1 Part 5: Main Customers and Projects

Introduction 5.1 Local projects 5.1 Local Main Customers 5.3 Export main customers 5.6

Approvals 5.10 Part 5: Certificates and Accreditations

UL Certificate 6.1 ISO Certificate 6.3

Jordan Quality Mark Certificate 6.5 SASO Certificate 6.7 Registration as a Public limited company 6.9 Chamber of Industry Registration 6.11

Civil Defense Registration 6.13 Part 7: Type Test Certificates

Introduction 7.1 Third parties Type Test Certificates 7.2 Part 8: Approved Suppliers List Part 9: Financial Information

MESC Financial Report 9.1

EPC Main Customers 5.9

G

eneral Inform

ation Part 1: General Information

1.1 Introduction Middle East Specialized Cables Company / MESC-Jordan is a public shareholding company estab-lished and registered in 1992. In a short time MESC-Jordan became the main supplier of all type of cables. MESC-Jordan produce extensive range of high quality standard of High, Medium and Low voltage power cables, instrumentation cables and electrical wires as well as overhead aluminum conductors. Thus MESC-Jordan is committed to: Maintaining customer satisfaction at the highest level. Contributing to the development of its country.

1.4 Main offices MESC-Jordan headquarters were established in Amman, due to the high activities of the Jordan's capital, in order to approach to MESC-Jordan customers and provide them with the best available and most competi-tive services.

MESC-Jordan Main Offices

Address: Amman - Al Abdali - Aqarco Building Location:

00962-6-5606205 Phone:

00962-6-5606221 Fax:

www.MESCCABLES.jo Website: Adel Jaber Contact Person:

[email protected] [email protected]

Email: CEO Position:

Amman 11190 Jordan P.O. Box 925611

1.5 Manufacturing Plants

The Two plants are located in Al-Mafraq, 60 Km from Am-man in the northern part of the country. Covering an Area of 77,000 m2 out of 427,000 m2 Available, MESC-Jordan prem-ises are equipped with state-of-the-art facilities, machinery and laboratories that ensure the supply of top quality products and services.

1.2 Vision To become a leader in supplying Power Cables in the MENA region supported by the latest technology.

1.3 Mission We are dedicated to provide optimal solutions to our customers with high quality products and services that will contribute in the development of the region. We are devoted to succeed in investments by maintaining a long-lasting relationship with our stakeholders and local community.

Major Buildings Production Hall 25,223 sq. M

Stores 20,900 sq. M

Offices 1,397 sq. M

Maintenance 546 sq. M

Storage Yards 176,000 sq. M

1.1

Part 1: General Information

General

Information

Plant general Information

Amman 11190 Jordan P.O. Box 925611

Address Al-Mafraq, 60 km from Amman Location

00962-2-6230601 Phone

www.MESCCABLES.jo Website Ibrahim Al Khatib Contact Person

[email protected] Email Operation Manager Position

1.2

1.6 Plant layout

MESC Jordan LV and Instrumentation plant

MESC Jordan MV and HV plant

Part 1: General Information

General

Information

1.3

1.7 Manpower MESC-Jordan is composed of around 440 employees distributed between the two Factory and Head offices. The company's organizational structure is illustrated in the following figure:

Part 2: MESC-Jordan Product Range

MESC-Jordan Standard Product Range

2.1

The most common products of MESC-Jordan may be Summarized briefly in the following Table, The complete MESC-Jordan line of products may be found In MESC-Jordan product catalogue which contains the most common products with full details and specifications for each size and type. MESC-Jordan also meets special designs according to customers requests and desires in coordination with the Sales Department.

MESC-Jordan Products

1. Domestic wires and flexible Cables Product Families Manufactured:

2. Low Voltage power Cables 0.6/1kV.

3. Overhead and Bare Conductors.

BS, IEC, EN, VDE, UL and NEC Manufacturing standards:

4. Medium and high Voltage Power Cables up to 132KV.

5. Instrumentation and Control Cables.

6. Fire Resistant ant and Special cables.

Product Range

Part 3: Quality

3.1 Introduction At MESC-Jordan a product is not moved to finished goods store until it is tested to ensure that it meets the international standard requirements. Therefore, in order to insure an inherent quality assurance system it is extremely desirable to test and inspect the product at each stage including raw materials and finished goods. MESC-Jordan standards for raw materials, design, quality, manufacturing and testing of cables are based on

Q

uality

3.2 Quality Control (QC) MESC-Jordan has a QC department in order to assure the top quality of MESC-Jordan products. The de-partment conducts routine tests on each length to make sure that the required specifications are met. This department is an independent department composed of 20 employees, who have the authority to stop any production line in case the quality standards are not met. The quality control system at MESC-Jordan includes :

a) Raw material inspection. b) In process inspection. c) Finished stage inspection.

The three types of inspections mentioned are done according to a comprehensive quality plan that is resumed in figure (2.1). Products must meet the following:

Relevant national or international specifications. Customer's purchase order. Customer approved technical specifications. MESC-Jordan inspections and tests. Net and Gross weight. Cable lengths.

3.3 Product identification and Traceability In order to trace MESC-Jordan products in the manufacturing process, each drum on the production floor is labeled with a tag containing the following information:

Process. Size. Type. Work Order number. QC remarks. Production remarks.

Moreover each machine has a production logbook containing similar information to that on the drum tag.

In addition, raw materials and in process materials are identified by a release or hold stamp, while finished products are labeled by a metal plate or a production tag. Using this system, MESC-Jordan can keep record of each stage of production and trace production and quality information at any production stage.

3.4 Quality Assurance (QA):

Quality Assurance plays an important role in the procedures of all MESC-Jordan departments, our quality system meets ISO 9001:2008 Standards. MESC-Jordan documented quality manual covers all the activities and procedure of all the company's departments. Our management representative for quality is responsible for:

3.1

Quality Part 3: Quality

Preparing an internal audit schedule which is implemented every six months. Preparing the quality objective action plan. Preparing the quality procedure manual distribution. Preparing the quality procedure distribution

Quality Control Process Flowchart

18.Thickness 9d. Diameter over round insulated cores 1. Tensile strength

19.Concentricity 9e. Diameter over laying up 2. Elongation at Break 20.Colour check 9f. Diameter over armour 3. Tensile strength after aging 21.Hot set test 10.Resistivity 4. Loss of Mass 22.Printing (embossing) check 11.Uniformity of zinc coating 5. Pressure test at high temperature 23.Insulation resistance 12. Wrapping test 6. Low temperature bend test. 24.High voltage test 13. Lay length 7. Low temperature elongation test 25.Armour resistance 14. Resistance 8. Low temperature impact test 26.Regular test 15. Weight of conductor 9a. Diameter of wires 27.Compatibility test 16. No. wires/wires diameter 9b. Diameter of drawing 28.Continuity 17. Sequence of colour 9c. Diameter of standard wire of round

conductor

3.2

Quality Part 3: Quality

3.5 Non conforming Products

In case products or Raw material do not meet the above mentioned points, a nonconformance report must be employed , As a result, corrective and preventive actions are taken into consideration under an internal procedure named identification and documentation of nonconforming products, in addition to the correc-tive and preventive action procedure.

Non conformances may be divided into two categories:

1. Major: Non conformances or flaws in products which cannot be repaired by regular routine methods. 2. Minor: which are within process limitations or that cannot affect main cables functions.

3.6 Testing Equipment: To assure the most accurate results in the products tests mentioned before, MESC-Jordan owns a list of the most modern testing equipment, these equipments are calibrated and supervised periodically by the Jordani-an Air force to assure its efficiency and correct results. Furthermore, MESC-Jordan is affiliated by numerous testing associations like:

Jordanian institute of Standards. Royal scientific society. BSI product services.

3.7 Procurement Management. MESC-Jordan suppliers are selected through a rigorous and objective system of evaluation performed by the most qualified team in order to assure the selection of the best quality raw material and machinery effi-ciency and high performance. The selection of the suppliers is carried out according to the following condi-tions:

The supplier must be ISO certified. Suppliers have to follow international standards. Their historical behavior and reputation, in addition to their long term relations with MESC-

Jordan. All purchases are run according to ISO procedures through purchase orders after being reviewed and approved, to assure the most professional communication with the suppliers. Purchasing needs are communicated by the procurement department when one of the following takes place. 1. Material requisition is prepared by the requesting party and approved by the department manager. 2. Items at reorder level; indicated by stock report that is updated daily and/or on the production plan. 3. Stock market price suitability. Once purchasing is approved the following steps are performed: 1. On the basis of the requested items, an enquiry and/or a purchase order is prepared by the

procurement department 2. Depending on the applicability, an enquiry analysis may be performed before selecting the

supplier. 3. A supplier is selected from the approved s upplier list and a purchase order is prepared by the

procurement department. The order is to be approved by the General manager. 4. A copy of the order is sent to the finance department, while an unpriced copy is sent to the warehouse for the preparation of arrival of items. A copy of any correspondences that contain any financial issues is also sent to finance.

3.3

Part 3: Quality

Q

uality

Quality Plan (part 1)

Company policy of raw materials is generated from the master schedule of three months ahead corre-sponding to a lead-time; material storage sequencing is subjected to First in First out (FIFO) storage

3.4

Quality Plan (part 2)

Q

uality Part 3: Quality

3.5

Sales

Departm

ent Part 4: Sales Department

4.1 Introduction The sales department is responsible of the company sales activities. In addition to managing quality and consistency of MESC-Jordan products and services to maintain customer satisfaction and MESC-Jordan quality name in the market.

4.2 Sales Department Services The responsibility of this department is not limited to sell MESC-Jordan products. It provides custom-ers with full and complete services. The main services that this department is obliged to provide are the following:

Prepare presentations, proposals and sales contracts. Identify and resolve clients concerns and clarifications. Coordinate shipping schedules and delivery of merchandize and services. Participate in different events. Develop and maintain sales materials and current product knowledge. Provide technical services to clients relating to use, operation and maintenance of product.

4.3 MESC-Jordan Quotations: The Sales Department is responsible for providing quotations to the customers. MESC-Jordan quota-tions must be offered in a written format. These quotations always include a validity period , delivery time and type of payment according to the available products in MESC-Jordan warehouse and in coor-dination with the manufacturing plant in order to provide an exact quotation for the required products. As all other departments, this department works in compliance with the ISO 9001:2008 procedures for the purpose of providing a uniform and consistent system to review tenders and contracts. This way, requirements are adequately defined and understood so that provisions can be made for personnel, re-sources, and facilities to execute the contract. Requests for special designs and specifications are also addressed to this department. Upon receiving these requests, the department studies the possibility of producing the desired specifications. These specifications are evaluated as shown in the following figure. If no objections are found by the end of the evaluation process, a quotation is offered to the client. The requirements that are taken into consideration before judging whether the special design or custom-er purchase order is worth producing and whether MESC-Jordan is capable of producing it or not, are the following:

Customers desired quantities and specifications. Required raw material availability. Machines limit specifications and production capacity.

In case this department cannot meet customers requisitions, the customer will be informed about the rea-sons for not producing the requested products.

4.1

Sales

Departm

ent Part 4: Sales Department

4.2

Evaluation of customers request

M

ain projects and custom

ers Part 5: Main projects and customers

5.1 Introduction

Since the date of its establishment, MESC-Jordan feels proud of taking place in the most im-portant projects of Jordan and the region along the last years, being part of the progress this nation has examined. Therefore, this qualification manual includes a list of some of the major projects in which MESC-Jordan has participated.

5.1

Medical

Year Contractor Project Name

1999 Soufan Co Medical Service Laboratories

1999 MEC Co. Mowasah Hospital

1999 Abu Aisha Co. Sahab Hospital

1999 Soufan Co. Wadi Mousa Hospital

2000 Astraco Farah Hospital

2000 East Star Thiban Governmental Hospital

2001 Electromechanical Al Esra Hospital

2002 Tran Mediterranean Al Hussein Medical City

2002 Abu Aisha Al Basheer Hospital

2002 Mid Contracting Prince Rasheed Hospital

2002 Al Shanty Group Consultative Hospital

2003 Technology Office Jordan Hospital

2004 Hiba Est. University Hospital

2004 JEME Prince Ali Hospital

2005 Hussein for Cancer Hospital

2005 Namrouti Co. Kidney Hospital

2010 Tran Mediterranean Prince Hashem Hospital/Aqaba

2013 ATCO AlKilani Hospital

5.2 Local Projects

Educational Institutes


1999 Al Hashemeya- Zarqa University

1999 Al el Beit University

2000 Jordan University

2003 Durrat AL Qassem Al Hussein Bin Talal University

2004 Hiba Est. Mouta University

2005 Hiba Est. Applied sciences University Stadium

2006 Technology Office AL Qodos College

2006 CEEC International Academy

2009 Hussaen Atiah German Jordan University

Hotels


1999 Keldani Co. Dead Sea Marriot Hotel

1999 Arab Constraction Co. Sheraton Hotel

1999 Modern resources Garden city Hotel

2000 Bin Laden Four Seasons

2000 Electromechanical Co. Jordan Hotel

2000 Technical Services Crown Plaza

2000 Technical Services Le Meridian Hotel

2000 East Star Cideen Hotel

2001 Modern Maintenance Co. Movenpick Aqaba

2002 East Star Bristol Hotel

2003 Mid Contracting Intercontinental

2004 Saudi Jordanian co Ashtar Hotel Dead Sea

2004 Haddadinco King Husain Conferences Palace Dead Sea

2005 Consolidated Est. Sunday Resort

2006 Hiba Est. Moon Beach Hotel

2006 ACCC Holiday In Dead Sea

2006 ACCC Crown Plaza Dead Sea

2007 Sama Jordan Palm Oasis project

2007 Saudi Oger Ltd Sraya Al-Aqaba Project

2007 Hiba Est. Marina Town

2009 Keldani Co. 4 Stars Hotel Aqaba

2010 Arab Towers Samarah Dead Sea

2013 Abu Aishah Makkah Plaza

Part 5: Main projects and customers

Banks


1999 Areen Est. HSBC

2002 Soufan Jordan Kuwait Bank

2002 Electromechanical Cont. Arab Bank

2004 Hussain Atiah Arab Bank expansion

2013 Concord Housing Bank

M


ers

5.2

M


ers Part 5: Main projects and customers

Main Customers

Share Holders Co Semi Government Governments

National Chlorine Industries JEPCO Armed forces

Specialized steel NEPCO Civil aviation authority

Jordan flour mills EDCO Royal Scientific Society

ALKEENA hygienic Paper Mill IDECO Ministry of transportation

Specialty food Co. Jordan cement factories The Great Amman Municipality

Modern Aluminum Industries Co Jordan petroleum Refinery Co. TV and radio Station

Jordan Manufacturing Co. Jordan phosphates mine Co. Zarqa free trade zone

Jordan Canning Co. Arab Potash Co. Ports Institution

Petra Engineering Industries Aqaba Railway

International Tobacco Co. Royal air force bid

Elba House W.L.L

5.3

5.3 Local Main Customers

Wastewater Treatment


1998 Farhan Abu Hamdan Co. Wadi Mousa waste water Project

1998 Morganti Samra treatment Project

1998 Salini Italstrade Kafrein Dam Project

1998 Al Andalus Jordanian Co. Al Taibat Village

2001 Hussain Atiah Kafrein Water

2003 ABB Dair Ala- Zai water Expansion

2004 Morganti Aqaba Water Treatment

2006 Vici Energies Samra Water Treatment

2006 Opera Pubbliche Tallbieh Water Treatment

2007 Doosan Heavy Industries Amman East Power Plant

2007 Issa & Nafa'a Ghabawi Landfill Project

2009 Aqua Treat Al Shobak Water Treatment

Different Projects


1998 Diran Contracting Co. Hussein Sports city

1998 Schneider Group East Amman Generation Project

1998 Hussein Attiah Olympic Swimming Pool

1999 East star Sahab sport city

1999 East Star National Poultry

1999 Emoush Jordanian's retired building

1999 Aldarras Aqaba ports

1999 Kalbuneh Ministry of water Labs

1999 Technical Services Telemetry for Tafilah and Karak

1999 AL Jaleel Petra spinning Co.

2000 East Star Sheikh Hussein Bridge

2000 Abu Aisha Amman Financial Market

2000 East Star Diabetes Center

2000 East Star Bachelor School

2000 Morganti Telemetry for Salt

2000 Consolidated Co. Aqaba Gate

2001 Diran Telemetry for al Karak

2001 Technical services Tobacco factory

2001 Al darras Aqaba Hand made area

2002 United Engineers Rum Village

2002 ABB Aqaba Industrial city

2002 Al Darras Stores village

2002 Al Darras 9th Area in Aqaba

2002 AEGEK Al wala Dam

2002 Hiba Est. Stadiums Lighting

2003 Code Cont. Drugs Quality Control

2003 Natinal constructions Al Omary Border

2003 Al Fadel Eng. Aqaba Yakht

2003 Kolin Al mujeb Dam

2003 Al Darras AL shamiah in Aqaba

2004 Abu Aisha Al-Omari Border

2004 Abdoun Trading co. Mecca Mall

2004 Harbi Shubeilat King Hussein Gardens

2004 Morganti Ma'in Water Treatment

2004 Technical services Union for tobacco manufacturing


M

ain Projects and custom

ers

5.4

M


ers

Different Projects


2005 Alpha City Mall

2005 Al Kurdi Mecca Mall

2005 Haier Haiers Expansion

2005 ACCC Al Husseins Mosque

2005 Alsamah Abdoun Club

2005 AMTEC Alghad TV

2005 Badawieh Carrefour

2005 Consolidated Est. Esteklal Mall

2006 Hiba Est National Museum

2006 Engineering House Royal Village

2006 Khaled Maraqa Amman Design Center

2007 Hussein Attiah Emaar Towers

2008 Haddadinco Taj Mall

2008 Abniah Electromechanical Vartex commercial complex

2008 Munier Al-Ali CO Amman Jarash Highway

2009 LG Hair Jordan Plant

2009 Abnyah Electro-Mechanical Vertex Towers

2009 Hiba Est Saraya Aqaba (zone K &I)

2009 J&P Queen Alia International Airport

2010 Hiba Est Aviation & simulation-QAIA

2011 MID Contracting Crisis Building Management- P511

2011 MID Contracting JIEFCO-Sulphoric & Phosphoric Acid Plants

2011 Gulf Symbols Co Saudi Embassy

2012 ACC ROTANA Tower

2012 Ammon Monyat Debeen

2012 Duret Al Qassm Public Security Department

2012 Husain Atieah Samara Lake DeadSea

2013 Hiba Est Abdali Mall

2013 Abniah Electromechanical DAMAC Towers

2013 WARSTILA IPP4 Mankher power plant


5.5


5.4 Export Main Customers

Export Main Customers

Year Country Name

1997 Iraq UR General Est.

1998 Iraq General Ministry of Interior

1998 Yemen M.H.Sabrah & sons for Trade Investment

1998 Yemen Al Ashwal for electric trade and Agencies

1998 Yemen Al Ahmar Group

1998 Yemen Al Saghir Sons

1999 Iraq General Establishment for Middle Electric distribution

1999 Iraq General establishment for Water and Sewerage

1999 Iraq Ministry of industry

1999 Iraq UNDP- North Iraq

1999-2012 Iraq Al Hassani Est

1999 Yemen Public Electric Corp

2000 Iraq Carbonate AL Calcium Project

2000 Iraq Ministry of Education

2000 KSA Saudi Modern Company for metals, Cables and plastic industry

2000 Kuwait Al Jahmah for trading Co.

2001 Qatar Middle East Traffic Light

2002 Iraq Iraq Oil Ministry

2002 Yemen Al Rashid for Trading

2002 KSA Al Elaal Est.

2002 Kuwait Al Fida for engineering

2003-2006 Kuwait Al Ahlia Co.

2003-2010 KSA MESC Specialized Cables

2004-2006 Qatar KBF Trading & Contracting Co.

2005-2012 KSA Saudi Electrical Company (SEC)

2005 KSA Gulf Farabi

2006 Qatar QAPCO

2006 UAE Drake & Scull

2006 Qatar Jersey Industrial Co.

2006-2007 USA KBR Government & Infrastructure

2007 UAE Consolidated Contractors International Company (CCIC)

M


ers

5.6




Year Country Name

2007 KSA Hail Hospital

2007 Qatar Pearl GTL

2007-2008 UAE General Trading Group GTG

2007 Qatar Megatec

2007 UAE Prime Engineering

2007 UAE Al Fahjan Contracting

2008 KSA Al FAnar

2008 UAE Dubai Electricity and water Authority (DEWA)

2008 UAE Shamal & Waris Trading Co

2008 KSA AREVA

2008 KSA Drake & Scull

2008 KSA Arabian BEMCO

2008 UAE Toledo Trading Co.

2008 KSA ARAMCO

2009 KSA Litwin

2009 KSA BEMCO

2009 KSA KAUST

2009 KSA MAADEN Project

2009 KSA AREVA

2009 Libya Apollo Ent.

2009 Qatar Qatar Petroleum (Doosan Heavy industries)

2009 Guinea Hyundai Engineering Co. Ltd.

2009 Vietnam Vietnam oil and Gas Group (Hyundai Engineering Co. Ltd.)

2009-2012 UAE Kingdom of Sheba (Palm Project)

2009-2012 KSA Princes Noura Unversity

2010 KSA KAMC (King Abdulaziz Military City)

2010 Bahrain AL DUR Independent Water and Power Project

2010 KSA Saudi Kayan LDPE project

2010 Algeria ARZEW (Sonlegaz)

2010 Venezuela PAGMI Project (ENPPI)

2010 Armenia Yerevan Thermal Power Plant (GS E&C Corporation)

M


ers

5.7




Year Country Name

2011 UAE DEWA (Mitsubishi Electric)

2011 Malaysia CHH Pacific Corporation (MES Tech)

2011 Singapore Golden Hill

2011 Madagascar LAVLIN

2011 Qatar Qatar Petroleum (Doosan Heavy industries)

2011 Iraq 2011 UAE Infinity Towers (Marina Dubai)

2011 Iraq 2010-2012 Iraq 2010-2012 Iraq 2010-2012 Iraq 2009-2012 Iraq 2011-2012 Iraq

2013 Iraq

M


ers

5.8


5.5 EPC Main Customers

EPC Project

Year Country Project Owner Contractor Project Name

2010 Mexico Mexican Federal Elec-tricity Commission

Samsung Engineering Terminal KMS DE GNL,s

2011 UAE DEWA Mitsubishi Electric DEWA PP

2011 UAE ARAMCO J.Ray Mcdermott KARAN (Offshore Flat Forms & Subsea Tapelines)

2011-2012 KSA SEC BEMCO PP 10

2012 KSA ARAMCO Petrol Steel Company SATORP Project

2012 KSA ARAMCO Tecnicas Manifa Project

2013 KSA ARAMCO Dayim Punj Lloyd Ltd Jubail Export Refinary

2013 KSA SEC BEMCO PP12

2013 KSA SEC BEMCO Construction of Qurayyah

2013 KSA ARAMCO ALSTOM Grid clean fuel Yanbu

2013 KSA SEC ALSTOM Grid AL SALAM PROJECT

2013 KSA SABIC DALIEM SAUDI ELASTOMER PRO-JECT

2013 KSA MA'ADEN Hanwha Engineering Gold project

2013 UAE ARAMCO J.Ray Mcdermott SAFANIYA PROJECT

2013 KSA SABIC Tecnicas Reunidas PETROKEMYA ABS PRO-JECT

2013 KSA SABIC Tecnicas Reunidas SAUDI ELASTOMER PRO-JECT

2013 KSA SABIC Technip SEP HALOBUTYL PROJECT

2013 KSA SEC Siemens NEW DAMMAM INDUSTRI-AL CITY-3

2013 KSA SEC MIDDLE EAST ENGI-NEERING & DEVEL-

OPMENT

AL SANABEL 380KV SUB-STATION

2013 KSA SEC SEPCOIII Electric Power RAS AL KHAIR POWER Plant

M


ers

5.9


5.5 Approvals

5.10

M


ers


5.11

M


ers


5.12

M


ers


5.13

M


ers


5.14

M


ers


5.15

M


ers


5.16

M


ers


5.17

M


ers


5.18

M


ers


5.19

M


ers


5.20

M


ers


5.21

M


ers


5.22

M


ers


5.23

M


ers


5.24

M


ers


5.25

M


ers


5.26

M


ers


5.27

M


ers


5.28

M


ers


5.29

M


ers


5.30

M


ers


5.31

M


ers

Part 6: MESC-Jordan Certificates & Accreditations

Certificates and

accreditations

6.1 UL Certificate

6.1

UL (ATL AMF)THHN


Certificates and

accreditations

6.1 UL Certificate

6.2

UL (ATL AMF)THWN


Certificates and

accreditations

6.2 ISO Certificate/ SGS

ISO 9001:2000 Certificate

6.3


Certificates and

accreditations

6.2 ISO Certificate/ SGS

ISO 9001:2000 Certificate

6.4

C

ertificates and accreditations


Jordan Quality Mark certificate

6.5

6.3 Jordan Quality Mark Certificate

C



Jordan Quality Mark certificate

6.6

6.3 Jordan Quality Mark Certificate

C



Saudi Standards, Metrology and Quality Organization (SASO)

6.7

6.4 SASO Certificate

C



Saudi Standards, Metrology and Quality Organization (SASO)

6.8

6.4 SASO Certificate

6.5 Registration as a Public limited company


MESC-Jordan's Registration as a Public limited company

Certificates and

accreditations

6.9

6.5 Registration as a Public limited company


MESC MV an HV Registration as a Public limited company

Certificates and

accreditations

6.10

6.6 Chamber of Industry Registration


Registration in The Chamber of Industry

Certificates and

accreditations

6.11

6.7 Chamber of Industry Registration


Registration in The Chamber of Industry

Certificates and

accreditations

6.12

6.8 Jordan Civil Defense Registration


Registration Civil Defense Certificate

Certificates and

accreditations

6.13

Part 7: Type Test Certificates

7.1 Introduction

As part of MESC-Jordan devotion to high quality products, MESC-Jordan has arranged since its establish-ment various relations with different professional organizations that accredited MESC-Jordan . A better per-formance and quality became an irrevocable MESC-Jordan attribute. MESC-Jordan obtains a varied number of test certificates from reputable laboratories and institutions. The most common are the following

RSS regular test certificates. BSI type test certificate. KEMA type test certificate NFC type test certificate. CPRI & TAG type test certificate.

7.1

Test

Certificates

Part 7: BSI Test Certificates NYA Wires

7.2

Test

Certificates

Part 7: BSI Test Certificates Flexible Cables

7.3

Test

Certificates

Part 7: BSI Test Certificates Flat Cable

7.4

Test

Certificates

Part 7: BSI Test Certificates NYA & Flexible Cables

7.5

Test

Certificates

Part 7: BSI Test Certificates Unarmoured Power Cables

7.6

Test

Certificates

Part 7: BSI Test Certificates Armoured Power Cables

7.7

Test

Certificates

Part 7: BSI Test Certificates Unarmoured Aluminum Power Cables

7.8

Test

Certificates

Part 7: BSI Test Certificates Armoured Aluminum Power Cables

7.9

Test

Certificates

Part 7: BSI Test Certificates Quail ACSR/AW

7.10

Test

Certificates

Part 7: BSI Test Certificates Overhead Twisted Cable

7.11

Test

Certificates

Part 7: BSI Test Certificates FR Power Cable

7.12

Test

Certificates

Part 7: KEMA Test Certificates AL/XLPE+ACSR/AW

7.13

Test

Certificates

Part 7: KEMA Test Certificates Armoured Power Cable

7.14

Test

Certificates

Part 7: LCIE Test Certificates Arial Bundle Cable

7.15

Test

Certificates

Part 7: TAG Test Certificates ACSR/ACS

7.16

Test

Certificates

Part 7: TAG Test Certificates AAAC Overhead Cable

7.17

Test

Certificates

Part 7: TAG Test Certificates Mica Type (Fire Resistant) Cable

7.18

Test

Certificates

Part 7: KEMA Test Certificates 52 KV Medium Voltage Power Cable

7.19

Test

Certificates

Part 7: KEMA Test Certificates

7.20

Test

Certificates

Part 7: KEMA Test Certificates 36 KV Medium Voltage Power Cable

7.21

Test

Certificates

Part 7: KEMA Test Certificates 132 KV High Voltage Power Cable

7.22

Test

Certificates

Qualification Manual

Documents

Transcript of Qualification Manual